Develop Bugs

Platinum Series Case for HTC EVO 4G from Best Buy - $30

http://www.bestbuy.com/site/Platinu...199186619&skuId=9943616&st=evo case&cp=1&lp=1
That is the case I got from Best Buy today. I compared it to the silicone one they had for $21 but I ended up with this one because it seems more durable and if you lay the phone on the screen the case lifts the screen off the surface its laying on to help protect the screen as well.
I think $32 out the door was a little pricey, but to protect my new phone it is definitely worth it.

They were sold out by the time I got there. I really wanted the one with the clip. Can't find them now. They are made by Seido from what I am hearing which they sell for $49.99 so it's a pretty good deal and solid imo.

can we get some pics? the product wasn't displayed good on there site

it's a great case. The insides are felt lined & padded. Also I had no problem slipping it in w/ the invisashield. The back of the case goes slightly past the camera lens so the phone isn't laying on it. Then there is a very small lip on the front to keep the screen from resting on a surface. A pretty solid case to use for now until more people start manufacturing for in. Hopefully serpent cases make something for this

enragedpaza said:
can we get some pics? the product wasn't displayed good on there site
Click to expand...
Click to collapse
its literally the same as the seido case that someone else posted a topic about. look at that topic and thres pictures and in the general section someone posted a video review of the seido case.
the best buy platinum case is just a re-branded seido case.

I had purchased it because a sales rep told me it was a part of the $30 bundle with the car charger and invisible shield. At the register it turns out that the rep gave me the wrong case and I bought it anyways. Early today I got my max coverage Invisible Shield installed and returned that case along with the Shield they had sold me.
The case is decent looking, definitely much better than most of the cases out now. I hope this phone gets the kind of variety in accessories that the iPhone does.

Freelancerx said:
its literally the same as the seido case that someone else posted a topic about. look at that topic and thres pictures and in the general section someone posted a video review of the seido case.
the best buy platinum case is just a re-branded seido case.
Click to expand...
Click to collapse
I think this specific case is different unless the picture Best Buy is using is incorrect. The cut outs are different. Also, Seidio themselves said in another forum that Best Buy has a Platinum Series case not made by them.
If the OP can post some pics we'd appreciate it. Thanks in advance.

There are two different Platinum Series case designs for the EVO @ Best Buy sold 3 different ways. The have the Seidio style horizontal split by itself, Seidio style with holster, and one styled like the Bodyglove case (vertical split). I picked up the Bodyglove style case - it's "rubberized" all the way around and felt lined inside.

:S thats expensive why dint you go to sprint? the body glove for the evo looks awesome I saw it at best buy and i dint like the back cover while the one in sprint i was and it was like 24 dollars.. and online its 19.99
pic
felling ripped off much? jijiji

phobos512 said:
There are two different Platinum Series case designs for the EVO @ Best Buy sold 3 different ways. The have the Seidio style horizontal split by itself, Seidio style with holster, and one styled like the Bodyglove case (vertical split). I picked up the Bodyglove style case - it's "rubberized" all the way around and felt lined inside.
Click to expand...
Click to collapse
can you post pics? the picture on their website is horrible. how do you like it?

The case was a bit pricey, but it feels VERY durable.
-------------------------------------
Sent via the XDA Tapatalk App

Hmm...sorry for the low quality. I don't know what happened.
-------------------------------------
Sent via the XDA Tapatalk App

senormatt said:
can you post pics? the picture on their website is horrible. how do you like it?
Click to expand...
Click to collapse
bsim85 posted a tiny pic, but here are some large ones:
It's OK. I've still got the original "screen protector" on my phone because I haven't tried it at work (I'm not going to open the Invisible Shield or 16GB memory card I bought until I verify the phone works everywhere I need it to, but the case comes in a resealable package so no worries there).
The back of the case is hard and has felt lining inside. The front part of the case (it splits around the edge of the device like the Body Glove) is more rubbery. It comes apart the same was as the Body Glove, with a coin in a corner slot. The camera lens is recessed a couple of millimeters from the edge of the case. When on it's back the case rests not on the overall rubberized surface but on the smooth edges of the case around the camera opening and the bottom ports so it could still slide around in your car this way. Will I keep it long term? Probably not. Will it suffice until something better comes along? Yes.
EDIT...
I should note that the case doesn't look as blue-grey in real life as it does in the pictures.

I bought the case at Best Buy and it's great. Radioshack had Zaggs for $15 plus the 20% off accessories if you got it in the morning. I got the case at Best Buy and it's excellent. A bit pricey, but one of the better cases I've seen. Plus the silicon cases sometimes get caught up in your pocket and harder to pull out.

phobos512 said:
bsim85 posted a tiny pic, but here are some large ones:
It's OK. I've still got the original "screen protector" on my phone because I haven't tried it at work (I'm not going to open the Invisible Shield or 16GB memory card I bought until I verify the phone works everywhere I need it to, but the case comes in a resealable package so no worries there).
The back of the case is hard and has felt lining inside. The front part of the case (it splits around the edge of the device like the Body Glove) is more rubbery. It comes apart the same was as the Body Glove, with a coin in a corner slot. The camera lens is recessed a couple of millimeters from the edge of the case. When on it's back the case rests not on the overall rubberized surface but on the smooth edges of the case around the camera opening and the bottom ports so it could still slide around in your car this way. Will I keep it long term? Probably not. Will it suffice until something better comes along? Yes.
EDIT...
I should note that the case doesn't look as blue-grey in real life as it does in the pictures.
Click to expand...
Click to collapse
Is this A EVO case?
cause it seems to have more cut outs in the side pic than the EVO has buttons on the side.

yeah, i went to BB on friday and there was a sign showing that the Platinum case, the invisashield screen protector, and a rocket dog car charger were on sale all together for $45.
the case is overall is very nice, i like how the screen is recessed and how the case does not get stuck in your pocket like a silicone case does.
i think it was a good deal for the money, seeing as how i needed car charger because the hero uses a mini usb port.

phobos512 said:
bsim85 posted a tiny pic, but here are some large ones:
It's OK. I've still got the original "screen protector" on my phone because I haven't tried it at work (I'm not going to open the Invisible Shield or 16GB memory card I bought until I verify the phone works everywhere I need it to, but the case comes in a resealable package so no worries there).
The back of the case is hard and has felt lining inside. The front part of the case (it splits around the edge of the device like the Body Glove) is more rubbery. It comes apart the same was as the Body Glove, with a coin in a corner slot. The camera lens is recessed a couple of millimeters from the edge of the case. When on it's back the case rests not on the overall rubberized surface but on the smooth edges of the case around the camera opening and the bottom ports so it could still slide around in your car this way. Will I keep it long term? Probably not. Will it suffice until something better comes along? Yes.
EDIT...
I should note that the case doesn't look as blue-grey in real life as it does in the pictures.
Click to expand...
Click to collapse
I bought one from BB (with holster for $34.99 (giftcard)), and it def doesn't look like that. Mine's a much more rubbery look / feel. It's black. The cut-out's on yours seem much more prominent and I don't have one on the lower right side (why is one even there? just the phone volume on the upper part of the right side...).
Strnage

I got slider case instead of the snap case. Reason being if you drop your phone on a corner, the slider case isn't going to split open like an egg leaving the yolk (EVO) splattered on the ground.

senormatt said:
I think this specific case is different unless the picture Best Buy is using is incorrect. The cut outs are different. Also, Seidio themselves said in another forum that Best Buy has a Platinum Series case not made by them.
If the OP can post some pics we'd appreciate it. Thanks in advance.
Click to expand...
Click to collapse
I dont know what Seidio is trying to pull but on the inside of the fake phone cutout (on the Platinum) it clearly states Seidio, Inc, Houston Texas.
Plus, I ordered a Innocase II and compared the two side by side. They are identical. Save you cash and buy the Platinum.

Tenny said:
I bought one from BB (with holster for $34.99 (giftcard)), and it def doesn't look like that. Mine's a much more rubbery look / feel. It's black. The cut-out's on yours seem much more prominent and I don't have one on the lower right side (why is one even there? just the phone volume on the upper part of the right side...).
Strnage
Click to expand...
Click to collapse
As I stated previously there are (2) different case designs from Best Buy - one like the Seidio Innocase and one like the Body Glove. The one I pictured is indeed for the EVO (it came with a "fake" cardboard EVO inserted in it). The "extra" port cutout you're seeing is how you take it off the phone - you insert a coin and twist it to pop the two halves apart (JUST like the Body Glove case).

[Q] Barely There-type case for the Samsung Captivate

So it looks like Case-Mate does not make a Barely There type case for the Samsung Captivate. Are there any other good similar options out there?

incipio feather is similar...but its less flexible

For a truly "barely-there" experience, I've just installed a screen protector. Voila!

I used to use what noma_pride mentioned above and was quite happy until recently. The full body skins tend to peel up from the edges and eventually dull overtime requiring replacements which can become quite annoying.
IMO I found no case/skins best. I found these jackets made from microsuede from sfbags.com and they are awesome! Check them out http://www.sfbags.com/products/cellphonecases/cell-phone-cases.php

slntdth93 said:
incipio feather is similar...but its less flexible
Click to expand...
Click to collapse
Picked that up for my wife. She loves it. Thanks.

I personally like the flexible cases that body glove makes. The AT&T store sells this one, but I would not recommend getting it from them. Much cheaper through ebay. I had a hard case that snapped on, but found it covered up the sides and bottom too much. It affected dragging apps from main screen to other screens because you couldn't get your finger far enough to the side for the screens to scroll. Also I purchased a spare battery with battery charger and it was a pain to unsnap the case and swap batteries when I needed to. I have dropped mine with the body glove and phone still looked perfect. I am sure a hard enough drop would still be able to damage it though. The only thing about the body gloves that I think suck is only comes in black or pink.

I have a silicon case I bought in the mall (don't recommend that but I needed one as the lady one broke), and it's awesome. It's a harder silicon that still moved, and grips the phone like a condom. Our was made by an off brand, but I'm sure you can find it easily in any mall or online shop
sent from something somewhere

I think TPU cases are the best. They aren't "barely there" cases but the closest providing all the proctection you need. Price is a plus too. Try searching tpu in ebay

Qubits Black TPU Gel Skin Case Pics

Product Link: http://amzn.com/B0062V037Q
I'm not really prepared to give a full review of this case yet since I just put it on today and haven't "lived" with it for very long, but I wanted to go ahead and post some pics for anyone who might be interested. These pics are of a Galaxy Nexus LTE with extended battery. I believe it's designed to fit the LTE with standard battery, but it fits just fine with the extended battery.
What I can tell so far -- the glossy/gel part of this case is rubbery and sticks to hard surfaces, but doesn't seem to stick to fabric/clothes so i don't think it'll be a problem getting in and out of pockets. The matte part is like a textured plastic -- very smooth and not sticky at all. The gel fits around the front and sticks up only a fraction above the screen like it's supposed to, so you can lay it face down and the screen won't touch the surface. Anyway, here are the pics.
If I'm missing any angles that anyone wants to see, let me know and I'll take more pics. I'll try to add some more opinions about this case after I've carried it around a little.

how flexible is the case?

Thanks for sharing large photos, it really helps to show the fit of the case. Think I'll go ahead and order one.
For those who have a different case, it would be nice to see those cases posted in a similar fashion.

I have this case too and I believe it was molded to fit the GSM version. I've had both versions of the phone and it fit the GSM version perfectly. The Verizon version (even without the extended batt) does not fit quite right. You can see it clearly in your 4th pic how it bulges out and does not hug the edges of the screen area properly. I also don't care for the button areas, as they are both enclosed and make it difficult to locate the buttons by feel.

Thanks. I just picked up one in green and it seems to fit fine over the extended battery. I am still able to find the power button because it has a different texture than the rest of the side.
It will probably take a few days to see if it is better out worse that the gel I got at Verizon. So far, so good. And it was on sale!
Sent from my Galaxy Nexus using xda premium

You can find this for 2 dollars on Ebay.
http://www.ebay.com/sch/i.html?_fro...TPU+Gel+Case+for+Samsung+Galaxy+Google+Nexus+

ludow said:
You can find this for 2 dollars on Ebay.
http://www.ebay.com/sch/i.html?_fro...TPU+Gel+Case+for+Samsung+Galaxy+Google+Nexus+
Click to expand...
Click to collapse
i don't think that is the same case. the one i got is made by Qubits.
@halo0: yes, i can tell this case wasn't made for the extended battery, and i can see what you're talking about in picture 4, but i don't notice any bulge in actual use, and i'm pretty anal about my cases.
also, like @VivianC mentioned, it's easy to find the power and volume buttons by touch because of the difference in texture.

ludow said:
You can find this for 2 dollars on Ebay.
http://www.ebay.com/sch/i.html?_fro...TPU+Gel+Case+for+Samsung+Galaxy+Google+Nexus+
Click to expand...
Click to collapse
My case was around £3 and is IDENTICAL to the pictures above and this link.
Don't spend more than $10/£5 on this case.
The reason why I am getting rid of this case is because it makes the screen/sleep button quite weird to press. (However, having this case for nearly a month you get used to it)
Sadly, lint and dirt collects easily around the lip of the case where it touches the screen.
There are NO issues with this case pulling up the screen protector edge. (I've read how someone said cheap TPU cases sometimes do this)
Does provides good protection for small knocks and drops! - Dropped my phone on wood floor twice and was well protected!

Got these on amazon for 8 each.green one for my girl black for myself. Barely noticeable and I actually think it fits better with the extend battery than the standard, mine (with extended battery) just feels better than hers without. Good skin, very pleased with it
Sent from my Galaxy Nexus using XDA App

I have three different colors (red, clear, and black) of this case and I have to say I am very pleased with them. They were made for the GSM version but they still fit pretty good with the CDMA's. (Small buldge that was previously mention) Paid $5 for the red and the clear one. $8 for the black one. I'd recommend it for those prices.

I've got this and I really don't like the button covers. They're to stiff for my liking. Amazon carries this for $9.99 with two screen protectors and a micro fiber pouch.
Sent from my ICY+ Galaxy Nexus

Video Review: Aluminum Bumper Case Review

Hey fellas,
Got my hands on affordable (but well made!) aluminum bumper style case for the Galaxy S3. This particular model came from Tmart but you can find similar ones on eBay, in all sorts of colors. It's a two piece case that fits nice and snug around your S3. It WILL bubble up some screenshields, which is unfortunate. All the ports and the cutouts are spot on, which is impressive for such an affordably priced case. Overall, while it doesn't offer a lot of protection, if you're looking for a bumper case - this is a good option!
Check out the video review below for more info;

Hey fellas,
Got my hands on affordable (but well made!) aluminum bumper style case for the Galaxy S3. This particular model came from Tmart but you can find similar ones on eBay, in all sorts of colors. It's a two piece case that fits nice and snug around your S3. It WILL bubble up some screenshields, which is unfortunate. All the ports and the cutouts are spot on, which is impressive for such an affordably priced case. Overall, while it doesn't offer a lot of protection, if you're looking for a bumper case - this is a good option!
Click to expand...
Click to collapse
Why keep throwing that word "affordable" out and not say what you paid for it? I have this very case since August ordering it straight from the manufacturer. I could find no dealer in the US. Plus, there were many knockoffs, especially on Ebay. Don't get me wrong, I love my TrioBump, I'm just annoyed at how so many post while leaving out details!
EDIT: Well, I watched the video and must apologize and complain even more! I should have watched it first (my bad) but I'd rather read the pertinent details in the post than watch a vid. I do not agree with your assessments. I think this case gives protection where it is needed most. I don't use any of those new fangled screen protectors that supposedly protect the display from impact damage. I think that's going to far. I do employ the Invisishield on front and back. It give a very snug fit with no bubbling. That said, I'm confident that I will not get any damage if my phone take a hit anywhere this bumper covers. My only concern would be having it hit a rock directly to the screen and in that case, I have insurance. I like the minimalist form factor plus the ease with which it can be taken on/off to change batteries. Plus, I can use it with my FlyGrip which is why I searched for just such a minimalist case. You slip in your two fingers and can use the phone with one hand without worrying about dropping. Plus, as you can see, it doubles as a stand. What has me newly annoyed is the price you quoted. I paid about 4o bucks from the manufacturer, Gimmick Five. I don't see how it could be sold for just 10 dollars.
EDIT: Just checked Gimmick Five's website, and they are still listed at 39.99 US. I'd like to know the story behind Tmart's TrioBumps.

Great case with OUT a cover

I searched everywhere for recommendations for a case with OUT a cover. I wanted just a case that covered the back and as slim as possible and with some grip but NOT sticky. I took a chance and bought this case for my 9.7" because I'm new I can't post a link but search eBay for X-Line Shape Soft TPU Rubber Gel Case Cover For Samsung Galaxy Tab S2 8.0"/9.7" the seller is hksanho I highly recommend it as it fits perfectly, is extremely well made (actually I'm shocked at how perfect the molding is) gives grip and is not sticky. I have a Gold Tab S2 and I bought the grey, it perfectly compliments it, further giving it the titanium look. Best of all it took only 6 days from time of order to delivery in Phoenix. I've only bought one or two things from directly from China and was extremely reticent to buy something I couldn't see or feel and not knowing if I'd ever actually get it in my lifetime LOL. Hopefully my post will help others and obviously I have no connection to the seller!

I agree
I purchased one of these cases for my Sony Z4 tablet quite a while ago; and it has been Fantastic! Super thin and fits Perfectly! I just bought one for my S2.
Thanks for finding the case. I was just trying to find out if the case was available for the Samsung - Really, I was!

Seems like the screen is the most vulnerable part. How does this kind of cover help?

KineticRider said:
I searched everywhere for recommendations for a case with OUT a cover
Click to expand...
Click to collapse
After holding the tablet for a longer period of time i found the edges too hard. Based on your experiences would this cover solve this for me? Also if it would make the back of it a little less slippery that would be a bonus

yes -solves also these issues. thanxx for the tip, i ordered a black one these days. very pleased. feels like the light tablet in hands and covers perfectly my external charging pad, which allows wireless charging. very, very cool. for "expeditions" outside the house, i put the whole thing inside a book cover for protection, but at home the "minicase" is fine.

midnightrider said:
Seems like the screen is the most vulnerable part. How does this kind of cover help?
Click to expand...
Click to collapse
That's what tempered glass screen protectors are for, aren't they?

Also looking for the decent case with cover made by tpu or something. In germany there just a few available from which I already tried one but that one was not fitting well. Any tipps?

..this thread is about case "with out" cover ? - i bought my "x-line" at amazon.de, fittin' perfect..