is there anyway to not have the drag down to unlock when i have the draw pattern to unlock enable?thanks
Try mylock in the market. It's an auto unlocker that I believe supports pattern locking.
Drag Down to Unlock
Mylock doesn't work for this issue. With the MyTouch Slide, by default, when the screen times out, it restores to a slider window that says "drag down to unlock". If you go into security settings and set an unlock pattern, you still get the drag-down screen before you get the unlock pattern. It would be nice to be able to remove the drag down to unlock screen when there is an unlock pattern set. I tried Mylock... no go. Anyone have a fix for this?
There are 10 types of people in the world... those who understand binary, and those who don't.
Bump. This is killing me.
OK...
The locks on my phone are very redundant to say the least.
In order to get to my home screen I have to do the following:
1. Press the button on top of the phone.
2. Slide the first lock down.
3. Draw in my security code to get past the lock out.
Step 3 can be shut on and off but I like this security so people can't mess with my phone. However considering I have to do step 1 before and step two also, it seems a tad over kill.
Can I disable step 2, the slide down lock screen?
Basically when I press the button on the top of the phone I want to be RIGHT at the screen where I draw in my lock pattern and or hit emergency call. I was unable to find anything in the settings. Did I miss it or is it really not there? If it's not there is there any other way to do it?
I'll fully rooted if that helps.
Try "No Lock" in the Market. It gets rid of the lock screen (and has a toggle widget). Not sure the effect on the security though.
No Lock gets rid of both the slide to unlock and the security passcode entry. Very handy if you don't care about security, but you get your mail from an Exchange server and they force you to have a security password.
Don't know how to just get rid of the slide to unlock.
i have a droid incredible with the same setup..sorta...i am running virtuous2.7
have u found a way to do this without No Lock?
You can do exactly what you're asking for with Switch Pro widget
nebenezer said:
You can do exactly what you're asking for with Switch Pro widget
Click to expand...
Click to collapse
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
snovvman said:
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
Click to expand...
Click to collapse
Would like to know, as my buddy was asking me about this.
Sent From My HTC Evo 4G Using Tapa Talk Pro!
If you use cyanogen rom, add power control widget and add the lockscreen option. Any time that widget is off when you hit the power button to unlock the phone you will go straight to pattern lock or home screen if you don't have one.
Sent from my PC36100 using XDA App
I would pay for an app/widget that handled this...
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
deathsled said:
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
Click to expand...
Click to collapse
I'm aware of this mod. People should be aware that you will need root access to delete the file. At the same time, I read that even with the AOSP/standard/vanilla lock screen, it (the standard lock screen) does NOT go away when the pattern lock is ENABLED.
For the Nexus 1, the standard lock DOES go away when pattern is ON, but it does not seem so with the Evo.
Can someone verify/dispute?
Thanks.
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
CzarMatt said:
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
Click to expand...
Click to collapse
Thanks. 1st post for CzarMat!!! Exactly my point--we need to find a way to make the Vanilla lock go away when pattern lock is enabled. But how??
This is all a bit redundant if the OP has Exchange security enabled on his device, which he has yet to clarify (unless I missed something).
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
is there any way to edit or app that enables a longer time period before the lock pattern screen comes up? LIke i think the max is like 15min
I want to be able to at least set the lock pattern screen to a 1hr interval, maybe 2hr
is this possible somehow?
Well, you can hit the "menu" capacitive button instead of sliding for a quicker unlock to the pattern security screen. That's what I normally do since it's a bit of finger acrobactics from the power button->aosp slide unlock->pattern screen.
jaypeezee said:
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
Click to expand...
Click to collapse
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
CzarMatt said:
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
Click to expand...
Click to collapse
Excellent news! Still looking for a solution. I think simulating a "menu" press will unlock the screen. Looking foward to it. Thanks!!
anyone come up with a solution for this?
How do I change the lock screen so that's it pattern only. Like the idea of dragging icons into the circle but am currently unlocking the phone and then having to enter my pattern. What have others done about this?
Never had this issue. Are you using a different ROM? If so ask the author. But every time I use an alternative lock method I never go through two lock screens.
I've got Nova Launcher installed and when I lock the screen using a nova lock screen widget, after two seconds it automatically unlocks the screen again and goes back to home screen.
It's clearly related to face unlock because when I cover the camera with a finger, the phone stays locked and doesn't unlock itself again.
When I change nova's unlock method to "admin" everything works fine but this method requires a Pin to unlock so I don't want to use it. The "accessibility" method is much preferred.
Anyone experiencing this??
With the Face unlock you need to have some kind of primary unlock. After I have the Face Unlock, why is it asking for my pattern unlock? Sometimes I see the silly face and sometimes I see the lock
What are your thoughts?
Thanks
67 views and not one thought?
pbman1953 said:
With the Face unlock you need to have some kind of primary unlock. After I have the Face Unlock, why is it asking for my pattern unlock? Sometimes I see the silly face and sometimes I see the lock
What are your thoughts?
Thanks
Click to expand...
Click to collapse
When is it asking for pattern unlock? If you are using for secure payments like Google Pay, it asks for pattern or fingerprint unlock as face unlock on 7T is not secure....Face unlock on 7T can only be used to unlock the device and nothing else...
Here's an example I just did. The phone is on my desk and dark. I picked up the phone, double tapped to wake the phone to the lock screen. I see the lock on the screen instead of the face icon
pbman1953 said:
Here's an example I just did. The phone is on my desk and dark. I picked up the phone, double tapped to wake the phone to the lock screen. I see the lock on the screen instead of the face icon
Click to expand...
Click to collapse
Using your example, when I double tap the screen it awakens the ambient display, showing me the time and any notifications that are on the screen. Also, the fingerprint scanner is active and lit up. I believe this is the intended behavior. The double tap simply wakes the ambient display.
If you want face unlock to kick in, you should press the power button.
One Plus told to switch to a pin instead of a pattern and it seems to work better. But you suggestion of using the power button is also on par, Thanks!
This problem also frustrates me. The issue is that the time out for face unlock to search for a face is WAY TOO SHORT.