Related
is there anyway to not have the drag down to unlock when i have the draw pattern to unlock enable?thanks
Try mylock in the market. It's an auto unlocker that I believe supports pattern locking.
Drag Down to Unlock
Mylock doesn't work for this issue. With the MyTouch Slide, by default, when the screen times out, it restores to a slider window that says "drag down to unlock". If you go into security settings and set an unlock pattern, you still get the drag-down screen before you get the unlock pattern. It would be nice to be able to remove the drag down to unlock screen when there is an unlock pattern set. I tried Mylock... no go. Anyone have a fix for this?
There are 10 types of people in the world... those who understand binary, and those who don't.
Bump. This is killing me.
OK...
The locks on my phone are very redundant to say the least.
In order to get to my home screen I have to do the following:
1. Press the button on top of the phone.
2. Slide the first lock down.
3. Draw in my security code to get past the lock out.
Step 3 can be shut on and off but I like this security so people can't mess with my phone. However considering I have to do step 1 before and step two also, it seems a tad over kill.
Can I disable step 2, the slide down lock screen?
Basically when I press the button on the top of the phone I want to be RIGHT at the screen where I draw in my lock pattern and or hit emergency call. I was unable to find anything in the settings. Did I miss it or is it really not there? If it's not there is there any other way to do it?
I'll fully rooted if that helps.
Try "No Lock" in the Market. It gets rid of the lock screen (and has a toggle widget). Not sure the effect on the security though.
No Lock gets rid of both the slide to unlock and the security passcode entry. Very handy if you don't care about security, but you get your mail from an Exchange server and they force you to have a security password.
Don't know how to just get rid of the slide to unlock.
i have a droid incredible with the same setup..sorta...i am running virtuous2.7
have u found a way to do this without No Lock?
You can do exactly what you're asking for with Switch Pro widget
nebenezer said:
You can do exactly what you're asking for with Switch Pro widget
Click to expand...
Click to collapse
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
snovvman said:
To verify my understanding, the OP wants to, on his Evo, disable the Sense drag/slide-down screen lock, and only use the pattern lock.
The problem is that the Sense lock remains even when the pattern lock is enabled. (Unlike the Nexus 1, the AOSP screen lock is automatically disabled when pattern lock is enabled).
Are you indicating that Switch Pro Widget will DISABLE the Sense slide-down lock while maintaining the pattern lock?
Click to expand...
Click to collapse
Would like to know, as my buddy was asking me about this.
Sent From My HTC Evo 4G Using Tapa Talk Pro!
If you use cyanogen rom, add power control widget and add the lockscreen option. Any time that widget is off when you hit the power button to unlock the phone you will go straight to pattern lock or home screen if you don't have one.
Sent from my PC36100 using XDA App
I would pay for an app/widget that handled this...
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
deathsled said:
delete the sense lockscreen from the phone, it's just a file you can remove. Once you do that the system reverts to the standard aosp lock screen (or the pattern if you have security set).
Click to expand...
Click to collapse
I'm aware of this mod. People should be aware that you will need root access to delete the file. At the same time, I read that even with the AOSP/standard/vanilla lock screen, it (the standard lock screen) does NOT go away when the pattern lock is ENABLED.
For the Nexus 1, the standard lock DOES go away when pattern is ON, but it does not seem so with the Evo.
Can someone verify/dispute?
Thanks.
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
CzarMatt said:
I can verify that after deleting the HTClockscreen.apk from my phone Vanilla lock appeared after a reboot. I then enabled a pattern lock only to find the Vanilla lock still necesary before getting to the pattern lock screen.
Click to expand...
Click to collapse
Thanks. 1st post for CzarMat!!! Exactly my point--we need to find a way to make the Vanilla lock go away when pattern lock is enabled. But how??
This is all a bit redundant if the OP has Exchange security enabled on his device, which he has yet to clarify (unless I missed something).
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
is there any way to edit or app that enables a longer time period before the lock pattern screen comes up? LIke i think the max is like 15min
I want to be able to at least set the lock pattern screen to a 1hr interval, maybe 2hr
is this possible somehow?
Well, you can hit the "menu" capacitive button instead of sliding for a quicker unlock to the pattern security screen. That's what I normally do since it's a bit of finger acrobactics from the power button->aosp slide unlock->pattern screen.
jaypeezee said:
I'd like an answer to this also...
Post 2.2, I was able to use No-Lock from the market to do exactly what the OP is asking. I have an Exchange account with a Security Policy (PIN) in place and have since upgraded to 2.2. It's a little redundant that I have to hit power, slide to unlock, then enter pin.
My workaround, for now, is setting the PIN lock screen to enable after 5 minutes, however I still have to slide regardless - UGHH, annoying.
I just want it to work the way I had it before with 2.1
Click to expand...
Click to collapse
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
CzarMatt said:
I agree. Apparently this is possible, I'm working on a solution right now. Perhaps an app I can release to the market. It will essentially unlock the phone for you - you may see a bit of the lock the second you unlock the phone, but if things go according to plan it will automatically bypass the slide lock for you.
[edit:] Sorry for the zombie thread revival - Still trying to find a solution for this problem.
Click to expand...
Click to collapse
Excellent news! Still looking for a solution. I think simulating a "menu" press will unlock the screen. Looking foward to it. Thanks!!
anyone come up with a solution for this?
Hi All!
I found a few threads on the Internet in different forums with no answer so I thought I'll ask the pros:
When I'm using Pin or Password to unlock the phone, I get the standard lockscreen display before I can unlock the phone, so it goes:
On/Off Button -> Lock Screen -> Pin / Password
The problem is when I'm using an unlock pattern, the lock screen gets skipped, so it goes:
On/Off Button -> Unlock Pattern
This is very annoying since I like to use the lockscreens mute function without having to unlock the phone. Apparently there is no way of changing this with settings so I was wondering if anyone know of a patch or another way to have the lockscreen AND the unlock pattern?
I'm using the Oxygen 2.0 RC6 Gingerbread Rom on my Desire but this seems to be a generel "issue" with stock Android Roms (Hero Roms and Froyo Roms is the same) - Sense based Roms behave different.
Thx for any hint!
*bump*
I am having a similar issue and my searching only found this thread.
While at work (2/3rds of my waking life) I use my phone at work to see where my next appointment is. It's very convenient to just glance down and see what meeting I have next by only hitting the power button. From what I have seen there are a lot of apps which will add this functionality to the lock screen.
The problem is when I add a passcode (required by work) it replaces the unlock screen with the passcode screen. I have seen that other Android phones do not do this, but the Captivate does. I've tried four different roms and all have this same behavior.
Is it possible to have the unlock screen come up, and when the phone is unlocked to prompt the passcode? I can't find a setting anywhere and the third party apps like Flylock have a jarring user experience in this configuration.
Thanks
...
Mabus the Mad said:
Is it possible to have the unlock screen come up, and when the phone is unlocked to prompt the passcode? I can't find a setting anywhere and the third party apps like Flylock have a jarring user experience in this configuration.
Thanks
Click to expand...
Click to collapse
The purpose of the pattern lock is to prevent unauthorized use of the phone. So it doesn't make sense if you put the lock screen over the pattern lock(or combined them) as you, or any stranger, will be able to issue commands(mute, read messages, weather, music etc. there are lots of widgets running on the lock screen) to the phone BEFORE unlocking it.
The security of the pattern lock will be totally compromised.
So the only choice is pattern lock over lock screen. I don't see how this makes anything easier. And I won't go into how it will create huge security loopholes/bypass the pattern lock completely if widgets or anything is allow to run on/over the lockscreen.
Perhaps I am using the wrong terminology, I should be referring to it as the "Unlock Screen" (Settings -> Display -> Unlock Screen). From this screen it appears that you can:
1) View the time
2) Unlock the phone
3) Mute the phone
4) See the notification bar (Vibrate, Battery, Signal, Pending notifications, etc)
I would actually like to add:
5) Next calendar appointment with location
6) Weather
This is all actions / information I want available at a glance and without unlocking the phone. Once I attempt to unlock I would like to be presented with the pattern / pin security. In this way all my private information remains hidden, but the information I use the most often while walking / driving is readily available.
I am also good with anyone else being able to pick up my phone and perform the actions I listed on the unlock screen. I believe this information is available from the unlock screen on the Windows Phone and iPhone (assuming it's your only notification, their notification system sucks).
Mabus the Mad said:
This is all actions / information I want available at a glance and without unlocking the phone. Once I attempt to unlock I would like to be presented with the pattern / pin security. In this way all my private information remains hidden, but the information I use the most often while walking / driving is readily available.
Click to expand...
Click to collapse
That PERMISSION to allow you do issue commands to your phone will compromise the security of the pattern/pin lock screen. You need to understand the core concept of the pattern lock screen is to be secure - no unauthorized use of the phone, whether it's as small as viewing notifications to fullon running widgets/apps.
Plus your definition of being secure doesn't equate to everyone's definition of security. It fine for you to display messages on the securely locked phone but it's definitely not for some of my friends who have really sensitive data on their phone.
I was not trying to advocate this behavior to everyone, just wondering if it was possible to set this up myself. One of the things I like about this phone is that everyone can customize it to fit their own tastes.
Actually, I think I found my solution. Flashed to CM7 last night. The pattern screen still had the behavior as the 2.2 roms but the passcode had the behavior I was looking for.
Well the thing is: When using PIN or Password to unlock, you can actually use the lockscreen to mute etc. before unlocking. And using the original HTC Rom, this is possible using unlock pattern, too. Everyone will have to decide for themself if he cosiders this function a thread to security, its just really annoying that I have to decide between unlock pattern and unlock screen even tho it should not be a problem technicaly. Cyanogen guys apparently have this on their list, but with minor priority. I'm really close to moving back to a HTC rom actually...
this bugs me too.. I like the PATTERN cause it's kind of unique and cool plus when you enter your pattern there is no "OK" key you have to press like you do when using PIN/PASSWORD which for some reason annoys me.. I suppose it's another line of defense against prying eyes that make it that much more work to try different pin options.. I don't know maybe it's to annoy them into giving up?.. Anyways, I've opted to use the PIN option because I too like seeing the Lock Screen and any info it has and I really don't see it as that big a security hole seeing the small amount of info on the lock screen.. unless you're running a ROM or app that has popups for messages and such.. and if it really is then Google should make the behavior that you do pattern then to the lock screen. of course I'm sure their reasoning for this is the pattern is a more difficult form of security to breach so there is benefit and no harm from taking you straight into the unlocked phone once the correct pattern has been entered. that doesn't mean we have to agree with the mighty G on this and I'm sure either Devs cooking in the ROM kitchen could change the behavior if they saw the want in the community, maybe a patch could be made or an app that changes the behavior. anyways, that's my $.02
If any of you guys find a solution around this issue please let us know!
Haven't seen any solution yet, how about you guys?
I have been trying to get Widget Locker working on my One but have hit an issue. I am thinking I may not be able to fix this without Root but I wanted to run it by the community to verify.
I have my phone linked to an Exchange server that forces a 4 digit pass-code onto the device. So from the default lock screen I swipe up and then get the keypad to unlock the device.
Widget Locker replaces the main screen and 60% of the time when I unlock the device it takes me to the keypad directly.
The other 40% of the time is the issue. When I unlock from Widget Locker it takes me to the default screen where I would swipe up. From this point I can ether swipe up and unlock or shut off the screen. When I try again it usually works perfectly.
Is there any way to get consistent behavior from Widget Locker without root? What I would expect would be to unlock and be taken to the keypad 100% of the time.
I would love to use widget locker, but I always get a 3-7 second delay with turning on my phone. Sorry I can't help you.
calash said:
I have been trying to get Widget Locker working on my One but have hit an issue. I am thinking I may not be able to fix this without Root but I wanted to run it by the community to verify.
I have my phone linked to an Exchange server that forces a 4 digit pass-code onto the device. So from the default lock screen I swipe up and then get the keypad to unlock the device.
Widget Locker replaces the main screen and 60% of the time when I unlock the device it takes me to the keypad directly.
The other 40% of the time is the issue. When I unlock from Widget Locker it takes me to the default screen where I would swipe up. From this point I can ether swipe up and unlock or shut off the screen. When I try again it usually works perfectly.
Is there any way to get consistent behavior from Widget Locker without root? What I would expect would be to unlock and be taken to the keypad 100% of the time.
Click to expand...
Click to collapse
Go into Settings and set the HTC lockscreen to none. It forces the phone to only use WL, and you never see the stock lockscreen. Works for me,
gomorrah said:
Go into Settings and set the HTC lockscreen to none. It forces the phone to only use WL, and you never see the stock lockscreen. Works for me,
Click to expand...
Click to collapse
That kills the security on the phone. We need to have ether a pin or password unlock to secure the device. Even without it I would want a pattern unlock at the least to keep it somewhat safe.
I expanded my search a bit and this seems to be a common problem on phones that have any sort of lockscreen security. What I cant understand is why it does work some times, but not others. It does not appear to be a timing issue but I cannot narrow down what else would randomly (apparently random) trigger the stock lock screen yet work other times.
calash said:
That kills the security on the phone. We need to have ether a pin or password unlock to secure the device. Even without it I would want a pattern unlock at the least to keep it somewhat safe.
I expanded my search a bit and this seems to be a common problem on phones that have any sort of lockscreen security. What I cant understand is why it does work some times, but not others. It does not appear to be a timing issue but I cannot narrow down what else would randomly (apparently random) trigger the stock lock screen yet work other times.
Click to expand...
Click to collapse
No, it doesn't. The HTC lockscreen and the Security lockscreen are two different things. You can have the HTC lockscreen set to none, and still have the option to unlock with any of the various lock methods(i.e. PIN, Pattern, Face Unlock, etc...) I know this is true because I use it everyday. I use WL, have my HTC lockscreen set to none, and still have to enter a PIN to unlock my phone. And have no delay when using WL once the phone is booted.
gomorrah said:
No, it doesn't. The HTC lockscreen and the Security lockscreen are two different things. You can have the HTC lockscreen set to none, and still have the option to unlock with any of the various lock methods(i.e. PIN, Pattern, Face Unlock, etc...) I know this is true because I use it everyday. I use WL, have my HTC lockscreen set to none, and still have to enter a PIN to unlock my phone. And have no delay when using WL once the phone is booted.
Click to expand...
Click to collapse
And I am an idiot. You are completely correct. I am trying it now, thank you.
Edit: Working like a charm. If anybody else is having this issue the setting is under Personalize, lock screen style.
Thanks again!
I've got Nova Launcher installed and when I lock the screen using a nova lock screen widget, after two seconds it automatically unlocks the screen again and goes back to home screen.
It's clearly related to face unlock because when I cover the camera with a finger, the phone stays locked and doesn't unlock itself again.
When I change nova's unlock method to "admin" everything works fine but this method requires a Pin to unlock so I don't want to use it. The "accessibility" method is much preferred.
Anyone experiencing this??