Develop Bugs

Cyanogen mod, cannot get google apps to load

I am loving cyanogen, but I am definitely missing something when I flash google apps. I get to the installation, but when I try to install it always gets interrupted. I try to skip it, but I cannot get back to it later, opening market does not work. How am I supposed to come back to install gapps later?
Sent from my SPH-D700 using XDA App

[email protected] said:
I am loving cyanogen, but I am definitely missing something when I flash google apps. I get to the installation, but when I try to install it always gets interrupted. I try to skip it, but I cannot get back to it later, opening market does not work. How am I supposed to come back to install gapps later?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Re-download the gapps.zip, put it on your SD card, go into cwm > flash gapps.zip > reboot.
It should work. If not, then extract the zip and copy the .apks one-by-one to your SD card, and push them to your system/app. Not sure if that would actually work, but it's possible.

Reflashing doesn't do anything I just tried it again. The only way to get it to try installing again is to wipe data, then I have to sign back in and I get interrupted again. There is a way to cancel it to come back later but when I hit cancel I can't figure out how to come back.
Sent from my SPH-D700 using XDA App

you're making sure to flash the gapps.zip from the cwm recovery, right? it has to be on the root of your sdcard, then boot into recovery and go to "install zip from sdcard" -> "choose zip" -> scroll to gapps.zip

Yep I am doing it that way, just tried again right now and nothing happens on reboot unless I do a factory reset. If I just knew how to come back to it later it would be ok
Sent from my SPH-D700 using XDA App

1. Clear data, dalvik, cache - rinse and repeat 3 times total.
2. Re-odin EH17 stock, found in the dev forum. Let the phone boot to startup.
3. Boot into CWM recovery, flash the GAPPS file.
4. Restart phone - check to see if the flash took.
5. Boot into CWM recovery, clear dalvik, cache 3 times, flash CM7 over EH17 stock...
Let me know if this process works for you.
May or may not work, it would solve the problem temporarily for me but would soon have problems. I shortly moved away from CM7 to Urban Metamorphosis.

OK, thanks I might give that a try, if it was just a temporary fix for you though it will probably only work for a while for me too. Doesn't anyone know how to postpone running it? It says to do so right when the app runs, but no one knows how to do it?

You don't need to flash the GAPPS pack - only if you want to use the market, sync contacts etc. and use voice/maps so on. If you continually cannot get past try ODIN'ing a different modem. EH06 worked much better for me over EH17.

I'm uing eh06 modem. Never went to eh17
Anyways, I downloaded all the gapps from the market one by one. I flashed the zip and they didn't show up so I did it the long way
Sent from my SPH-D700 using XDA Premium App

A_Flying_Fox said:
I'm uing eh06 modem. Never went to eh17
Anyways, I downloaded all the gapps from the market one by one. I flashed the zip and they didn't show up so I did it the long way
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
I'm on the ec05 modem, but I had to flash the gaps.zip then download everything from the market also
Sent from my SPH-D700 using XDA App

where do u download gapps.zip from I have been looking for it everywhere...can u post a link plz\...thx

systems6 said:
where do u download gapps.zip from I have been looking for it everywhere...can u post a link plz\...thx
Click to expand...
Click to collapse
Isn't it in the OP in the CM7 ROM thread?
Sent from my SPH-D700 using XDA App

[VM/PRIMOC][RECOVERY] TWRP2 Recovery 7-10-2012

Code:
#include <std_disclaimer.h>/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications, and if * you point the finger at me for messing up your device, I will laugh at you. */
*YOU NEED TO BE HTC UNLOCKED TO FLASH A CUSTOM RECOVERY!!!!!!*
If you are ONLY HTC unlocked you will need to follow the fastboot method to install, if you are HTC unlocked AND rooted, you can use the goo manager method.
Special credits:
toastcfh for assisting me in getting this working
Dees_Troy for the amazing work on TWRP 2.1
Full TeamWin credits are on the TWRP page on the TeamWin website: http://teamw.in/project/twrp2
Introduction:
Team Win Recovery Project 2.1, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It’s a fully touch driven user interface – no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Key Features:
Touchscreen driven with real buttons and drag-to-scroll
XML-based GUI that allows full customization of the layout – true theming!
Settings are saved to the sdcard and persist through reboots
Ability to choose which partitions to back up and which to restore
Ability to choose to compress backups – now with pigz (multi-core processor support for faster compression times)
What's new in 2.1:
Zip queuing as seen in TWRP 1.1.x is back
Slider control (swipe to confirm most actions aka swipe to wipe)
Lockscreen (with slider to unlock)
Basic file manager (copy, move, delete, and chmod any file)
Added support for devices with /data/media (most Honeycomb tablets, new ICS devices like Galaxy Nexus)
Displays sizes of each partition in the backup menu
Added listbox GUI element (currently used for listing time zones)
Updated stock XML layouts to be more consistent and easier to port to different resolutions
XML layout files are significantly smaller
Partitions available backup are more accurate for some devices
Removed unneeded error messages (/misc errors, unable to stat sd-ext, etc.)
Fixed a bug with blkid detection code
Fixed bug where a blank line was inserted between every line of text during zip installs
Fixed a bug during zip installs where an invalid zip would cause TWRP to get stuck in the zip install
Added setting for themers to toggle simulation mode to make theming easier
New devices added - Galaxy Nexus GSM & CDMA (preview only, manual install), Acer Iconia Tab A500, HTC Vivid, Motorola Defy
Added support for .jpg images in the theme engine
Changed images for stock tablet theme - makes tablet builds about 500KB smaller
Removed unneeded non-GUI images from GUI - makes all builds about 100KB smaller
In addition to the above new features, TWRP 2.1.0 now features a scripting engine that allows an app to send commands to the recovery for the recovery to perform during startup. We call this scripting engine OpenRecoveryScript. This engine will be put to use immediately in the GooManager app. GooManager will be able to install recoveries automatically for most supported devices. The app will also let you choose to install multiple zips from within Android, wipe cache & dalvik, and run a backup.
Theming:
Information on TWRP 2 Theming - http://teamw.in/project/twrp2themers
Instructions
"fastboot flash recovery twrprecovery.img" in fastboot
Download

HTC Dumlock -- Now flash kernels in recovery without S-off
TWRP 2 Instructions:
Install the build of TWRP using your method of choice, but you must actually flash TWRP to recovery. No fastboot booting it. We need it in recovery so that this build of TWRP will be flashed to your boot. This new build of TWRP has features in it to easily restore your original boot.
Reboot into recovery.
Make a backup of your phone.
Tap Advanced.
Tap HTC Dumlock. (If you don't see HTC Dumlock then you need to remove any custom TWRP theme that you might be using.)
Tap Install HTC Dumlock. This will install the app and binaries needed to make everything work nicely.
Reboot your device.
Find and open the HTC Dumlock app.
If/when prompted, give the app root (SuperUser) permissions.
Tap the Execute HTC Dumlock button.
Wait patiently for a couple of minutes. It takes a little while.
If your device doesn't reboot automatically, reboot it manually. Reboot it normally. DO NOT reboot it to recovery.
You should now be in your recovery, but your recovery is flashed into boot.
Tap Advanced.
Tap HTC Dumlock.
Tap Restore Original Boot.
Use your recovery like normal. Flash a new kernel. Restore a backup with a different kernel. Do whatever you please!
Consider donating!
Note, you must repeat steps 8 through 18 EVERY TIME you need to flash boot.

Can anyone upload this? I just rooted my phone.
Sent from my HTC One V using xda app-developers app

cpie20 said:
Can anyone upload this? I just rooted my phone.
Click to expand...
Click to collapse
Here's the recovery file:
http://www.mediafire.com/?n1iu92wpyba9s95

dafzuka said:
Here's the recovery file:
http://www.mediafire.com/?n1iu92wpyba9s95
Click to expand...
Click to collapse
Thanks!!!! Your a life saver!!!!
Sent from my HTC One V using xda app-developers app

Will goomanager install this recovery for me? Thanks in Advanced still learning
Sent from my HTC One V using Tapatalk 2

aaronrw said:
Will goomanager install this recovery for me? Thanks in Advanced still learning
Sent from my HTC One V using Tapatalk 2
Click to expand...
Click to collapse
It tries, but I've never seen it succeed. You usually need to flash recovery using fastboot on the One V.

Can this be installed via terminal emulator by chance? I'm not too sure what the commands would be if so......
sentfromybrain

OK have tried many time can not get it to down load in to reboot can anyone help with more info
Sent from my One V using XDA Premium HD app

sbkjuggalo said:
OK have tried many time can not get it to down load in to reboot can anyone help with more info
Sent from my One V using XDA Premium HD app
Click to expand...
Click to collapse
What are u saying, I don't understand what's goin on give me more input
Sent from my primoc using xda app-developers app

Alright somebody!!!!!!!
Reboot it normally. DO NOT reboot it to recovery.
[*]You should now be in your recovery, but your recovery is flashed into boot.
[*]Tap Advanced.
[*]Tap HTC Dumlock.
[*]Tap Restore Original Boot.
[*]Use your recovery like normal. Flash a new kernel. Restore a backup with a different kernel. Do whatever you please!
[*]Consider donating!
[/LIST]
Note, you must repeat steps 8 through 18 EVERY TIME you need to flash boot.[/QUOTE]
From here on I'm not sure if doing right I'm not a total noob and have done every step before this multiple times and cannot get to work when I reboot it normally it takes me straight to my rom not the recovery don't know what have done wrong
Sent from my One V using XDA Premium HD app

[/QUOTE] From here on I'm not sure if doing right I'm not a total noob and have done every step before this multiple times and cannot get to work when I reboot it normally it takes me straight to my rom not the recovery don't know what have done wrong[/QUOTE]
I couldn't ever getting working either. When I ran the app to install the required binaries, it said the procedure failed every time. When you finish that step is it saying the install passed?

From here on I'm not sure if doing right I'm not a total noob and have done every step before this multiple times and cannot get to work when I reboot it normally it takes me straight to my rom not the recovery don't know what have done wrong[/QUOTE]
I couldn't ever getting working either. When I ran the app to install the required binaries, it said the procedure failed every time. When you finish that step is it saying the install passed?[/QUOTE]
Me to all the bianerys install but I don't know if they go to right spot I get same failed message and everything
Sent from my One V using XDA Premium HD app

OK I'm sure somebody he has done/knows how this works please if u do share the knowledge please I can't believe that there isn't anyone that wants to be able to flash via device------
Sent from my One V using XDA Premium HD app

It's currently broken because recovery is too large. It needs to be rebuilt with a stripped kernel to make it smaller
Sent from my PG86100 using xda premium

Thanks for the response (I did hit thanks) one question is this something I can do and if SSO how is done? Have some knowledge of Linux and a really smart wife or is this a more developer thing thx again.
Sent from my One V using XDA Premium HD app

jmztaylor said:
It's currently broken because recovery is too large. It needs to be rebuilt with a stripped kernel to make it smaller
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
I know you develop for a different device but would you consider doing this, dumlock and goo manager installs would be amazing! Thanks for all you do here....
sentfromybrain

aaronrw said:
I know you develop for a different device but would you consider doing this, dumlock and goo manager installs would be amazing! Thanks for all you do here....
sentfromybrain
Click to expand...
Click to collapse
yes i agree strongly with the person up stairs it would be very very nice i understtand u are very busy and we dont mean to bother u guys but it would be nice to have that freedom and yes i do knw that simon and a few are working on a s-off but that has some time till it is done

jmztaylor said:
It's currently broken because recovery is too large. It needs to be rebuilt with a stripped kernel to make it smaller
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Was this done recently? remember reading this recovery received an update I thought.....
sentfromybrain

I'm not entirely sure who is building these, maybe they are just being automatically built by goo.im, but you can find new builds of TWRP2(latest one is 2.3.1.0 as of right now) over here: http://goo.im/devs/OpenRecovery/primoc. I've flashed 2.3.1.0 and it is working perfectly on my VM PrimoC.
I figured many people may not even know about these, seeing as the OP has not been updated in a while. Can you shed some light on this, JMZ?

[ROM][ZIP][TAR]Stock Rooted Deodexed/Odexed GB27 with SuperSU/Busybox 1.20.2

I am sure you don't need GB27 but for the sake of continuity I am providing it.
First of all a huge thanks to Sextape for the GB27 release. Thanks to Calkulin for use of the install script. Thanks to Chainfire for SuperSU. Thanks to Mattix724 for the install instructions which I tweaked slightly.
Flash or Odin this to get Deodexed/Odexed stock GB27 with latest root (SuperSU), su binary and Busybox 1.20.2. These Do Not include a kernel. The Odin Tars include everything else.
There is a version for no data wipe and data wipe. Make sure you don't get them mixed up.
All of the zips wipe cache and dalvik for you so no need to do that separately.
I am not responsible for anything that happens to your phone. You do this at your own risk.
DO NOT FLASH THE DATA WIPE VERSIONS UNLESS YOU ARE USING A RECOVERY THAT SUCCESSFULLY WIPES DATA ON JELLY BEAN, LIKE GARWYNN'S
This is a Jelly Bean Rom. As I stated earlier it does not include a kernel. So if you are coming from a Rom that isn't Jelly Bean you need to first install a Touchwiz based safe kernel. Like Agat's source kernel. So copy the Jelly Bean kernel to your phone. Boot into your recovery. Flash the Jelly Bean kernel and then flash this Rom. Or if you are using Odin just Odin the Jelly Bean kernel and Rom back to back.
Looking for Kernels or Modems? Try the rwilco12 repositories.
Kernel Repository: http://forum.xda-developers.com/showthread.php?t=1662295
Modem Repository: http://forum.xda-developers.com/showthread.php?t=1764210
Downloads:
Download Odexed No Data Wipe Zip
MD5: a55797595686a5d6acfc2c037da14c34
Download Odexed No Data Wipe Tar
MD5: 2e7573db3e5219069bc9919a8e4351f1
Download Odexed With Data Wipe Zip
MD5: 313ae43761dc96877bd77d7f460c0db4
Download Odexed With Data Wipe Tar
MD5: da384b49fbdb9e5b4e31f6596ca33648
Download Deodexed No Data Wipe Zip
MD5: 6a824a7fcc9814a6d795a70877694192
Download Deodexed No Data Wipe Tar
MD5: Later
Download Deodexed With Data Wipe Zip
MD5: e4d3d67be3a40e35704cbf0108be251c
Download Deodexed With Data Wipe Tar
MD5: Later
Mirrors:
Dropbox has a limit so please only use those as a last resort.
http://beta.androidfilehost.com/?a=show&w=files&flid=4147
http://d-h.st/users/crawrj/?fld_id=13409#files
https://www.dropbox.com/sh/0t7wncjr3wzf8i6/UPvimtqReG
Installation Instructions:
CWM zip method.
*Menus may vary between recoveries. The instructions below apply to Agat's recovery but may be the same or similar as other recoveries..
1. Download the ROM zip to your phone.
2. Reboot to recovery, use a known safe recovery such as Agat's source built, or the CWM EL26 directboot.
3. Put your phone in recovery mode (Shut it off, wait for lights to all go out, then hold Vup+Power).
3. Select install zip from sdcard.
4. Select choose zip from sdcard if your zip file is on the external sdcard or select choose zip from internal sdcard if you downloaded the zip right to your phone.
5. Select the zip, If you downloaded directly to your phone it is in the Download folder. Otherwise, it is wherever you put it.
6. Select Yes.
7. Wait for a moment while it installs.
8. Reboot.
9. Profit.
Odin tar method.
1. Download the tar to your computer.
2. Put your phone in download mode (Shut it off, wait for lights to all go out, then hold Vdown+Power and follow the instructions).
3. Connect the phone to the computer (You should see Odin put a Com4 or something like that in the ID:COM box. The actual number is NOT important what is important is that something popped up there when you connected your device, meaning ODIN can see it).
4. Using a Windows based computer, open Odin.
5. Make sure that only Auto Reboot and F. Reset Time is selected.
6. Click PDA.
7. Select the tar file.
8. Click start.
9. Wait while the ROM is being flashed.
10. The device will reboot and you are now running the new ROM.
11. Profit.
12. If the phone locks up, give it plenty of time if you think you waited long enough wait longer, for any reason take the battery and sdcard out and let it sit for an hour. Put it back together and try again.
Mobile Odin method.
1. Download the tar.
2. Open Mobile Odin.
3. Select Open file...
4. Check the partitions, you should have a Kernel and a System.
4A. Mobile Odin Pro users, you can choose whether or not to inject SuperSU and Mobile Odin as well as enable EverRoot, this its already rooted so no need to EverRoot.
5. Select Flash firmware, follow the prompts.
6. Your device will reboot and begin flashing the ROM.
7. Profit.

Reserved for me

Oh something new.
Pp.:beer::thumbup: This is great!
Well done! :thumbup:
Sent from an Epic Touch that shoots jelly beans into your .....eye .... phone.

Hey hey ...hes back ....thanks!!
Sent from my SPH-D710 using xda app-developers app

Yay! A GB27 with it's own OP. I didn't really like how the only stock deodexed was buried in kobridge's thread.
Sent from my SPH-D710 using xda premium

Thanks for this work crawrj!

Is this based off of the leaked GA27, or the official release?
What is the difference between odexed and deodexed?

ar09876 said:
Is this based off of the leaked GA27, or the official release?
What is the difference between odexed and deodexed?
Click to expand...
Click to collapse
Leaked and there is no difference.
Don't take offense but you can Google the answer to the other question.
Sent from my SPH-D710 using xda premium

tdunham said:
Leaked and there is no difference.
Don't take offense but you can Google the answer to the other question.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Yeah, i realized i could Google it, and did.
Also, There isn't any difference at all? I thought there were a few small differences.

Odexed starts up faster but with deodexed there are a ton more options for customization
Sent from my SPH-D710 using Xparent Red Tapatalk 2

ar09876 said:
Is this based off of the leaked GA27, or the official release?
What is the difference between odexed and deodexed?
Click to expand...
Click to collapse
tdunham said:
Leaked and there is no difference.
Don't take offense but you can Google the answer to the other question.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
TD already answered but I'll just link this anyways.
http://forum.xda-developers.com/showthread.php?p=39929974
Sent from my SPH-D710 using xda premium

Crawj: I'm a little unsure about the comment in the OP about not flashing the data wipe versions until we get a working kernel that allows factory reset. Right now I'm using SXTP-Agat's 0.3.1 kernel. Would that one be acceptable?
Thanks

Foulwx said:
Crawj: I'm a little unsure about the comment in the OP about not flashing the data wipe versions until we get a working kernel that allows factory reset. Right now I'm using SXTP-Agat's 0.3.1 kernel. Would that one be acceptable?
Thanks
Click to expand...
Click to collapse
No. To my knowledge, there are no GB27 kernels that will allow data wipe, except for stock. So if you need to factory reset I would first do it from the stock kernel. Then install the custom kernel and proceed. I know Garwynn is actively and aggressively working on a solution.

Garwynn's newest kernels have fixed the data wipe issues. You can now use those zips if you like.

Links with the md5 "later" don't work
Sent from my SPH-D710 using xda premium

juan91 said:
Links with the md5 "later" don't work
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Sorry, I haven't made it to the tar files yet. That's why it says later.
Sent from my SPH-D710 using xda premium

Duuh! Haha ^_^ alright thank you
Sent from my SPH-D710 using xda premium

Odexed Tars are up now.

As stupid as this sounds - Anyone have any issues with this ROM crashing and then becoming unbootable? I decided to go to stock root with this kernel a few weeks ago - middle of using it it froze, rebooted, and then got stuck on the Samsung GS2 Boot screen, never making it to the Sprint 4g boot animation. I thought it was something I did - so I reflashed and all was fine. This was with running agats recovery kernel. I also loaded this on a friends S2 and after about 2 weeks or so, same issue occurred. Was wondering if maybe I missed a step or if this was a known issue or something. I was pretty impressed with the speed, battery life, and stability of this rom except for this weird issue.

cdgtcc said:
As stupid as this sounds - Anyone have any issues with this ROM crashing and then becoming unbootable? I decided to go to stock root with this kernel a few weeks ago - middle of using it it froze, rebooted, and then got stuck on the Samsung GS2 Boot screen, never making it to the Sprint 4g boot animation. I thought it was something I did - so I reflashed and all was fine. This was with running agats recovery kernel. I also loaded this on a friends S2 and after about 2 weeks or so, same issue occurred. Was wondering if maybe I missed a step or if this was a known issue or something. I was pretty impressed with the speed, battery life, and stability of this rom except for this weird issue.
Click to expand...
Click to collapse
When that happens go into recovery and wipe cache and dalvik cache. This should be your first go tio thing if something isn't running right or seems off, or if things are running slow. It works wonders if you do it every couple days. JB caches everything and doesn't always wipe caches when it should.

[Q] Hyperdrive Installation problem

Hi guys, I've been trying to flash the new Hyperdrive RLS11 on my AT&T Galaxy s3 and no matter what I do, my phone says cant open and aborts the installation. I can never get the Aroma installer to start. I do factory reset, wipe cache, dalvik, and format system, but it fails every time. Any ideas?

Could be a bad download. You could try grabbing it again. Also, is your recovery up to date?

xBeerdroiDx said:
Could be a bad download. You could try grabbing it again. Also, is your recovery up to date?
Click to expand...
Click to collapse
I downloaded it from 3 different of his mirrors none of which worked. Im of the latest version of Clockwork mod. could it be the new update from 6.0.3 to 6.0.3.1 on clockwork? or should i use something other than clockwork

you should use twrp.. check the md5 of your download after you download it for accuracy. try that.. if it doesnt work u can always flash cwm again

Flash in twrp. Get twrp by downloading goo manager app and selecting install open recovery
Also are you grtiing a status 7 error?
Sent from my SAMSUNG-SGH-I747 using xda premium

For whatever reasons, sometimes when flashing in cwm or twrp, you will have issues and installing the other custom recovery will allow you to flash the desired ROM. you obviously then have the option to return to the custom recovery you were previously running either because you prefer it or all your backups were made in it.

Alright thanks ill try it tonight, hopefully it works
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

B.domonoski said:
Alright thanks ill try it tonight, hopefully it works
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Some ROm's are picky or you have a bad download. Issues with downloading that rom seem quite common. I tend to lean more towards android file host than anything.

i'm i nthe same situation for the past 2 days i have been trying to install it , i had the problem that after flash and reboot it will reboot back to recovery , today that seems not to be happening anymore now i'm getting stuck on boot animation and i have tried every step fix anytihng you can think of and no luck , i'm running now thw rls 10 with no problems but this rls 11 is driving me crazy i'm doing a redownload se if that helps in anyway

I used twrp and it worked fine! Thanks guys
Sent from my SCH-I605 using xda app-developers app

I used CWM without a problem
"You stay classy San Diego"

B.domonoski said:
I used twrp and it worked fine! Thanks guys
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
awesome. Glad it worked for you... it can be a picky, but gorgeous rom.

Similar problem
Hey guys
I've gone through all the steps as instructed, but can't install HD RSL15 successfully. I downloaded the installation file from a mac which then automatically unzips the folder. Zipped it back up with 7zip and threw it on the phone. I went through all the prescribed steps using TWRP 2.6 and AndroidUnite's video on youtube (How To Install TWRP Recovery And Flash Custom ROM) as example . This is the 2nd time Ive downloaded the file and I switched over from CWM based on this thread's recommendations.
When it comes to installing the ROM the window ends up looking like this:
Checking for MD5 file...
Skipping MD5 check: no MD5 file found.
Error flashing zip...
Updating partition files...
FAILED
Have I done something wrong during the previous steps (flashing, installing recovery) or does it have something to do with the method of zipping the files (tried fastest and store as compression options, doing store makes the file unreadable by the phone during recovery mode)? Please help

BrokenPop [5.1.1][official][coming this weekend]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
About ROM
Credits
From our lead dev:
Originally Posted by InkSlinger420 View Post
This started as my personal project..I was looking to start something that was exactly what I wanted on my nexus 7 instead of either a rom with a bunch of features you need a search to find (not that theres anything wrong with that, just not my cup of tea), or too light where i needed a module to get it (not that theres anything wrong with that either). It is very early in, but I and my team are trying to make this a enjoyable project and keep it updated as best we can regularly. Keep it friendly, or GTFO.....Thanks guys..
Thanks to Slim for the best base...and anyone (person or team) who has helped me along the way..
Click to expand...
Click to collapse
Installation Procedure
Make sure you are on twrp 2.8.0.0 or Philz 6.07.9
Then
1. Backup internal sdcard to pc
2. Factory reset
3. Wipe/format internal sdcard
4. Reboot recovery (very very important step)
5. Install rom
6. Boot rom
7. Boot into recovery
8. Flash Gapps
How to update. I always suggest a clean install and will not help with any issues from a dirty flash but if you choose to dirty flash please follow the instructions below for best results. AGAIN ANY ISSUES RESULTING FROM DIRTY FLASH WILL BE YOURS TO FIX.
1. Backup current rom
2. Wipe cache and dalvik cache
3. Flash 1.3
4. Flash gapps
5. Reboot and enjoy
Downloads
Downloads have been removed. New builds will no longer be supported here on xda but any questions about older builds will be answered.
Changelog
*UPDATES*
They show when they show, Gonna try to keep it regular, like Bran​
XDA:DevDB Information
BrokenOs, ROM for the Google Nexus 5
Contributors
CrackerTeg, Inkslinger420
ROM OS Version: 5.0.2 Lollipop
Based On: AOSP
Version Information
Status: Alpha
Current Stable Version: v 1.0
Stable Release Date:
Created 2014-09-21
Last Updated 2014-10-19

Extras
Shift-lollipop kernel (thanks to Brett Rogers)
Kernel source -- https://github.com/rogersb11/Shift
https://www.androidfilehost.com/?fid=95857557620392493
GPS Fix
https://www.androidfilehost.com/?fid=95864024717069228
SuperSU
http://forum.xda-developers.com/showthread.php?t=1538053

I am testing the newest build right now as it is uploading so if you open the download folder and dont find 5.0.2 right away just check back in 10 mins and it should be up.

Awesome, cant wait to try in the morning, jlm can you point me in the right direction where I can find twrp 8.0 TeamWin is not showing an update for our device (l900).......tytyty :good:
I am running Philz 6.07.9 if thats your preferred recovery. Which would you recommend.

sloanmeister said:
Awesome, cant wait to try in the morning, jlm can you point me in the right direction where I can find twrp 8.0 TeamWin is not showing an update for our device (l900).......tytyty :good:
I am running Philz 6.07.9 if thats your preferred recovery. Which would you recommend.
Click to expand...
Click to collapse
6.07.9 works best. if you want to use twrp the link is in the twrp thread.
Sent from my SPH-L900 using XDA Premium 4 mobile app

Flashed per instructions with Philz 6.07.9.
GPS works great after fix.
Hotspot works great.
I was getting a lot of reboots when I first flashed, but I wiped caches and installed the Shift Kernel, and that seemed to have that fixed it for a while. But now I'm getting constant reboots. When it boots, as soon as the screen times out and dims, it reboots. Perhaps I changes some setting, or restored something with Titanium that I wasn't supposed to...
If I power off the phone with the power plugged in, I get the battery icon, and I need to pull the battery in order to reset the phone. But it also does this on the LiquidSmooth 5.01.
Otherwise, it looks great (love the boot animation) and looking forward to its maturity.

resarfekim said:
Flashed per instructions with Philz 6.07.9.
GPS works great after fix.
Hotspot works great.
I was getting a lot of reboots when I first flashed, but I wiped caches and installed the Shift Kernel, and that seemed to have that fixed it for a while. But now I'm getting constant reboots. When it boots, as soon as the screen times out and dims, it reboots. Perhaps I changes some setting, or restored something with Titanium that I wasn't supposed to...
If I power off the phone with the power plugged in, I get the battery icon, and I need to pull the battery in order to reset the phone. But it also does this on the LiquidSmooth 5.01.
Otherwise, it looks great (love the boot animation) and looking forward to its maturity.
Click to expand...
Click to collapse
To try to help with the reboots, i have read in other 5.0 Roms when you first turn it on you need to turn on Wi-Fi before the screens goes black. You should be fine after that and can then turn off the Wi-Fi.

root
how do i get root on this? this one seems alot better then liquid smooth lollipop.but cant root?

ummkiper said:
how do i get root on this? this one seems alot better then liquid smooth lollipop.but cant root?
Click to expand...
Click to collapse
I think you can download supersu from Google play and you should be good to go.
Sent from my SPH-L900 using XDA Free mobile app

Having some issues with the lollipop Roms. Hope I can ask here since this is my fav. Keep having dialer force close. Tried reflashing, clearing cache etc. Was working when I first flashed but then when I flashed aicp it started. Also my sprint connection shows ! a lot of the time. What could be the reason for this? On CDMA+LTE/evdo
Sent from my SPH-L900 using XDA Free mobile app
---------- Post added at 02:07 AM ---------- Previous post was at 01:54 AM ----------
Just noticed I don't have root myself. Tried installing SuperSU and it said I don't have su binary installed. In philz I notice it says do u want to root when leaving recovery. I will try that to see if it kicks into play.
Edit: Tried going into philz settings and re rooting. It says install SuperSU from market. Did that and it freezes showing nothing but black screen. Maybe this is causing my other issues.
Sent from my SPH-L900 using XDA Free mobile app

Same here with root, tried with recovery and super Su freezes.super user did nothing.I tried with Dr ketans kit and that didn't work either.after I tried all the root methods the signal started showing ! And stayed that way til I reinstalled.But not having root is my main issue.

ummkiper said:
Same here with root, tried with recovery and super Su freezes.super user did nothing.I tried with Dr ketans kit and that didn't work either.after I tried all the root methods the signal started showing ! And stayed that way til I reinstalled.But not having root is my main issue.
Click to expand...
Click to collapse
There is no superuser built-in to the rom. Flash the link in extras.
Sent from my XT1045 using XDA Free mobile app

Thanks. The link worked. Any idea why I can't use phone dialer? Force closes every time I try to use. I can't call out. Can receive calls though.
Sent from my SPH-L900 using XDA Free mobile app

deviouskind said:
Thanks. The link worked. Any idea why I can't use phone dialer? Force closes every time I try to use. I can't call out. Can receive calls though.
Sent from my SPH-L900 using XDA Free mobile app
Click to expand...
Click to collapse
You wiped everything before install? It should work normally. I am able to send/receive/end calls without issue.
Sent from my XT1045 using XDA Premium 4 mobile app

Yes it was working until I flashed aicp. Wanted to try that one but once I restored broken it happened.
Sent from my SPH-L900 using XDA Free mobile app

deviouskind said:
Yes it was working until I flashed aicp. Wanted to try that one but once I restored broken it happened.
Sent from my SPH-L900 using XDA Free mobile app
Click to expand...
Click to collapse
You did a full wipe before restoring broken?
Sent from my XT1045 using XDA Premium 4 mobile app

I did wipe data/factory reset/clean to install new ROM, cache partition and dalvik. I am going to start from scratch again and format internal/reboot recovery after wiping etc.
Sent from my SPH-L900 using XDA Free mobile app

Phone app keeps crashing on me I can't make a call.
Sent from my LG-V700 using XDA Free mobile app

jpisini said:
Phone app keeps crashing on me I can't make a call.
Sent from my LG-V700 using XDA Free mobile app
Click to expand...
Click to collapse
Okay guys if yall have issues i really need to have logcats.
Sent from my SPH-L900 using XDA Premium 4 mobile app

The total format of internal and reinstall did not work.
I notice when you have the ! for service, this is when the phone app crashes when trying to make a call.
Not sure if this is a fix but I got mine working (service and making calls).
*Settings - More (wireless&networks) - Cellular Networks
Make sure preferred network is CDMA+LTE/EVDO
Click on Carrier Settings (I clicked the bottom one at first then tried the middle one and both worked).
*When you click on Carrier Settings it will force close. But, if you notice, the service icon goes blank and then reappears.
I waited a few seconds and LTE was active.
I tried to make a call and I did not get a force close. Went through fine.
If it doesn't work right away, try this a few times. This could be a fix or I just lucked out.
Sent from my SPH-L900 using XDA Free mobile app