Hi guys, I've been trying to flash the new Hyperdrive RLS11 on my AT&T Galaxy s3 and no matter what I do, my phone says cant open and aborts the installation. I can never get the Aroma installer to start. I do factory reset, wipe cache, dalvik, and format system, but it fails every time. Any ideas?
Could be a bad download. You could try grabbing it again. Also, is your recovery up to date?
xBeerdroiDx said:
Could be a bad download. You could try grabbing it again. Also, is your recovery up to date?
Click to expand...
Click to collapse
I downloaded it from 3 different of his mirrors none of which worked. Im of the latest version of Clockwork mod. could it be the new update from 6.0.3 to 6.0.3.1 on clockwork? or should i use something other than clockwork
you should use twrp.. check the md5 of your download after you download it for accuracy. try that.. if it doesnt work u can always flash cwm again
Flash in twrp. Get twrp by downloading goo manager app and selecting install open recovery
Also are you grtiing a status 7 error?
Sent from my SAMSUNG-SGH-I747 using xda premium
For whatever reasons, sometimes when flashing in cwm or twrp, you will have issues and installing the other custom recovery will allow you to flash the desired ROM. you obviously then have the option to return to the custom recovery you were previously running either because you prefer it or all your backups were made in it.
Alright thanks ill try it tonight, hopefully it works
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
B.domonoski said:
Alright thanks ill try it tonight, hopefully it works
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Some ROm's are picky or you have a bad download. Issues with downloading that rom seem quite common. I tend to lean more towards android file host than anything.
i'm i nthe same situation for the past 2 days i have been trying to install it , i had the problem that after flash and reboot it will reboot back to recovery , today that seems not to be happening anymore now i'm getting stuck on boot animation and i have tried every step fix anytihng you can think of and no luck , i'm running now thw rls 10 with no problems but this rls 11 is driving me crazy i'm doing a redownload se if that helps in anyway
I used twrp and it worked fine! Thanks guys
Sent from my SCH-I605 using xda app-developers app
I used CWM without a problem
"You stay classy San Diego"
B.domonoski said:
I used twrp and it worked fine! Thanks guys
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
awesome. Glad it worked for you... it can be a picky, but gorgeous rom.
Similar problem
Hey guys
I've gone through all the steps as instructed, but can't install HD RSL15 successfully. I downloaded the installation file from a mac which then automatically unzips the folder. Zipped it back up with 7zip and threw it on the phone. I went through all the prescribed steps using TWRP 2.6 and AndroidUnite's video on youtube (How To Install TWRP Recovery And Flash Custom ROM) as example . This is the 2nd time Ive downloaded the file and I switched over from CWM based on this thread's recommendations.
When it comes to installing the ROM the window ends up looking like this:
Checking for MD5 file...
Skipping MD5 check: no MD5 file found.
Error flashing zip...
Updating partition files...
FAILED
Have I done something wrong during the previous steps (flashing, installing recovery) or does it have something to do with the method of zipping the files (tried fastest and store as compression options, doing store makes the file unreadable by the phone during recovery mode)? Please help
Related
Well, I tried Cyanogen, AOPK and now I tried PARANOID 2.0.
None of them works, GAPPS works, but I get the Status 7 error while installing a ROM, i'm using the SGH-T999V and none of them works.
How are you trying to install them?
Sent from my SGH-T999 using xda premium
You are rooted and trying to install with cwm or twrp recovery, right.
I ask because that error reminds me of stock recovery for some reason...
Sent from my SGH-T999 using xda app-developers app
Hey make sure you've rooted your phone first. I'm on cm10 with leankernel and everything works just great. Good luck!
Sent from my SGH-T999v using xda app-developers app
Sounds like stock recovery to me bud..
Sent from my T999 GS3 @ 2GHZ
d2tmo wrong device?
Status 7 errors can occur in ClockworkMod for everyone saying he's using a stock recovery.
Make sure your rooted and you should be good
Hey SGH-T999V,
I think we'd all love to help, but we need some more information. Can you tell us step by step exactly what you are doing? Once we have that, I think we will be able to help you past this.
I am fully rooted with clockworld recovery 5.0.4 or something, installing zip from sdcard then Status error 7 and yeah...
From what I've gathered, status 7 errors usually occur when the ROM is incompatible with the device e.g when flashing a CDMA rom on a GSM phone. My first advice would therefore be to confirm that the zip file is for the correct GS3 variant. You mentioned aokp and CM. Both these ROMS refer to the T999 as "d2tmo" and the zip files usually contain this in the name (e.g cm-9-20120909-NIGHTLY-d2tmo.zip). I would therefore check this first before anything else.
Assuming that's not the issue, some suggestions would be:
1. This is a longshot, but try toggling signature verification and see what happens. I doubt this is the issue but I have had update zips fail because this was accidentally toggled
2. Try updating CWM: http://forum.xda-developers.com/showthread.php?t=1766552
3. Try changing the recovery to TWRP and see if its the recovery. The easiest way I've found is to use the GooManager app. Install from the play store. Run the app. Hit the menu key and select Install OpenRecoveryScript. Reboot into the TWRP recovery and try flashing from there.
4. Try rerooting the device from scratch
I got this error when I rooted using the Sprint method. I had to reflash cwm using Rom manager before I could install Cyanogen
Sent from my SGH-T999 using xda premium
I had the same problem. I updated cwm and it fixes it. Your version is old....
Sent from my SGH-T999 using Tapatalk 2
Just updated CWM to 6.0.1.2 and tried to flash with TWRP... same Status 7 error with every single ****ing ROMs i'm trying to install.
Wiped everything many times before installing zip, nothing works... i'm giving up and downloading stock ROM until Samsung releases official JB 4.1.
You might have to go back to stock and root it again
Sent from my SGH-T999V using XDA Premium HD app
could try installing the roms with Odin
Could try downloading the roms using Rom manager pro and having it install them
You just got to get one to work and you'll be golden
Is it a setting problem in cwm?
Like toggling allow installation of unsigned packages
Sent from my SGH-T999 using xda premium
Just update cwm to a newer version. I promise that'll fix it.
Sent from my SGH-T999 using xda premium
Or pay someone to do it. Look for rooting services on craigslist
Sent from my SGH-T999 using xda premium
same here
Hi, there,
just looking for solution for the same problem and got this thread...
well, I was rooted and on cyanogen and everything worked fine.
had backups and stuff.
decided to return to stock just to have it updated and backed up and after that to return to cyanogen.
when in CWM, after stock, while re-root-ing, I did a fix permission which erased some of my system files in the backups, so all my backups on the phone became useless (lesson #1: always move your backups away from the phone).
decided to start from scratch, so using ODIN I flashed the proper stock ROM for T999V. Installed the CWM version 5. something, superuser etc.
made a backup this time and store it outside the phone
when I tried to flash the cyanogen 10.0 for m2tmo (which I've flashed before without trouble), I got the error message as our friend here.
I edited the updater-script file in order to erase the first lines and got it flashed...
the problem that I have right now is that I am stuck in the first screen when the cyanogen keeps going round and round and round.... and nothing happens
any suggestion from here?
http://wiki.rootzwiki.com/ClockworkMod_Recovery#Status_7
The status 7 error can be from a bad download, bad signature, and I have seen it from using an old version of clockwork. I would first make sure you are running the most current version of recovery. if that doesn't solve your problem try redownloading the Rom.
Hey guys,
I am using PA on my Galaxy Nexus and loving it, not I am trying to put it onto a Note 2 (317M)
Not to sure why I am getting a E:signature verification failed when I am trying apply the rom in recovery mode...
I rooted with Odin, I have CWM installed, wiped the cache and did data/factory reset.
Also I downloaded the file from this link, which I got from the Note 2 PA page http://forum.xda-developers.com/showthread.php?t=2069430
Any help would be greatly appreciated!
JERF!
maybe you got a bad download? did you verify md5?
Must be a bad download, or something else. Not to sure why its not working...
To bad, I love this ROM.
Just downloaded & installed.
Try to re-download
Or try TWRP. I've had issues with cwm not being able to install certain .zip files and twrp works fine
Sent from my SGH-I317 using xda app-developers app
g2tegg said:
Or try TWRP. I've had issues with cwm not being able to install certain .zip files and twrp works fine
Sent from my SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
i just installed paranoid last week to test for a few days with cwm no problem. op most likely didn't verify the md5 so that's why he's guessing he's got a bad download and doesn't know for sure. that's probably the easiest way to confirm whether or not it's worth flashing. got a bad download and didn't verify md5, then you'll run into problems and i dunno.. worst case brick your phone.
I downloaded CM 10.1 nightly build ( cm-10.1-20130130-NIGHTLY-d2tmo.zip ) and got the error Installation aborted. Did I do something wrong? I know it maybe a dumb question but... did I brick my phone??
This is what I got:
Finding update package...
Opening update package...
assert failed: getprop ("ro.product.device") == "
d2tmo" | | getprop ("ro.build.product") == "d2tmo"
E: Error in emmc/cm-10.1-20130130-NIGHTLY-d2tmo.zip
(Status 7)
Installation aborted.
Did you edit your build prop before hand? and no you're not bricked.
mt3g said:
Did you edit your build prop before hand? and no you're not bricked.
Click to expand...
Click to collapse
Oh, that's good! No, I didn't edit my build prop. What is a build prop?
Oh boy, what recovery are you using? I'm pretty sure you are using an old version and need to update... besides the 1-30 nightly is loaded with bugs I've been reading. restore your nandroid and update your recovery and wait for the next nightly.
and onseopm
mt3g said:
Oh boy, what recovery are you using? I'm pretty sure you are using an old version and need to update... besides the 1-30 nightly is loaded with bugs I've been reading. restore your nandroid and update your recovery and wait for the next nightly.
Click to expand...
Click to collapse
A little to over my head I guess. I think its clockworkmod recovery version 5 (CWM-Recovery-LTE-SGS3-v5).
Restore my nandroid? I don't think I made a restore point, after the error I just went back and rebooted..
Was I supposed to do that?
It looks to be working, I rebooted twice and I don't think I messed it up. Though now I'm paranoid..
Dove99x said:
A little to over my head I guess. I think its clockworkmod recovery version 5 (CWM-Recovery-LTE-SGS3-v5).
Restore my nandroid? I don't think I made a restore point, after the error I just went back and rebooted..
Was I supposed to do that?
It looks to be working, I rebooted twice and I don't think I messed it up. Though now I'm paranoid..
Click to expand...
Click to collapse
Yeah it's because you need to update cwm, make sure you flash the correct one.. And if its booting fine then you're ok, but you should always make a backup of a working ROM if your gonna do some tinkering with your phone as a safety precaution, it really bails you out at times
Sent from my SGH-T999 using xda premium
serio22 said:
Yeah it's because you need to update cwm, make sure you flash the correct one.. And if its booting fine then you're ok, but you should always make a backup of a working ROM if your gonna do some tinkering with your phone as a safety precaution, it really bails you out at times
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I'm in the process of backing up now. Is there anything special I need to do to upgrade my cwm recovery? I've heard updating cwm recovery could result in a soft brick, is that correct?
If you have rom manager just press update cwm.
(It actually says flash cwm)
If you don't have rom manager download it from the play store.
I wouldn't worry about bricking during this process
Sent from my SGH-T999 using xda premium
Dove99x said:
I'm in the process of backing up now. Is there anything special I need to do to upgrade my cwm recovery? I've heard updating cwm recovery could result in a soft brick, is that correct?
Click to expand...
Click to collapse
You don't need to worry about bricking if you use ROM manager as Android_Monster stated, it will flash the correct version too
Sent from my SGH-T999 using xda premium
Android_Monsters said:
If you have rom manager just press update cwm.
(It actually says flash cwm)
If you don't have rom manager download it from the play store.
I wouldn't worry about bricking during this process
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
So the whole issue of installations being aborted is because of the outdated cwm.
I asked if it'll do a soft brick because I did a google search and came across multiple posts warning the use of Rom Manager. Any way to uninstall CWM and replace it with something else.
Yes to installation abortion.
To replace CWM, just flash another recovery over it.
You can just get TWRP from goomanager from the play store. Just flash it over and you'll be good to go.
Dove99x said:
So the whole issue of installations being aborted is because of the outdated cwm.
I asked if it'll do a soft brick because I did a google search and came across multiple posts warning the use of Rom Manager. Any way to uninstall CWM and replace it with something else.
Click to expand...
Click to collapse
Yeah just install twrp from goo manager like mt3g.. I've used ROM manager to install and update mine but if you want to replace cwm you can flash twrp and it'll replace it
Sent from my SGH-T999 using xda premium
mt3g said:
You can just get TWRP from goomanager from the play store. Just flash it over and you'll be good to go.
Click to expand...
Click to collapse
Great... another error. Rooting isn't working out for me is it? Invalid MD5 sum from Goo Manager. What does that mean and what exactly can I do about it?
Nope, actually worked out after allowing download from unknown sources in security. Since I installed TWRP, can I delete the backup I made in clockworkmod recovery? I think its in my SD and its 3 GB. It titled "Clockworkmod" has folder titled "backup", then two folders "1970-04-23.05.07.43" and "1970-04-23.05.00.14".
I want to have space so that I can make a recovery using TWRP. I'm not sure if deleting this would cause more harm then not.
Dove99x said:
Great... another error..
Rooting isn't working out for me is it...
Invalid MD5 sum from Goo Manager. What does that mean and what exactly can I do about it?
Since I installed TWRP, can I delete the backup I made in clockworkmod recovery? I think its in my SD and its 3 GB.
Click to expand...
Click to collapse
It was probably just a bad download, try downloading that file again
Sent from my SGH-T999 using xda premium
serio22 said:
It was probably just a bad download, try downloading that file again
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
It worked, can I delete my Clockworkmod folder on my SD card? Its 3GB and I think its the backup I made before in clockwork. I'm afraid I might mess things up by deleting stuff, since I don't know what I'm doing. I want to delete that folder, go into TWRP and create a recovery.
Dove99x said:
It worked, can I delete my Clockworkmod folder on my SD card? Its 3GB and I think its the backup I made before in clockwork. I'm afraid I might mess things up by deleting stuff, since I don't know what I'm doing. I want to delete that folder, go into TWRP and create a recovery.
Click to expand...
Click to collapse
It should be fine, its kind of big for just a back up though.. Make the backup with twrp first and check where it puts the back up at.. When I used 4ext recovery with my previous phone, it put the backups in the cwm folder for some reason
Sent from my SGH-T999 using xda premium
serio22 said:
It should be fine, its kind of big for just a back up though.. Make the backup with twrp first and check where it puts the back up at.. When I used 4ext recovery with my previous phone, it put the backups in the cwm folder for some reason
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Thanks, you guys have been extremely helpful.
I'm about to install the rom now, I wanted your insight into if its a good rom and if I'm doing everything right.
- I've made a backup using TWRN
- Downloaded Titanium Backup, made another backup (Not sure what this will do)
- Changed Rom to AOKP Milestone 1 ( aokp_d2tmo_jb_milestone-1 )
- Downloaded Google Apps ( gapps-jb-20121212-signed )
Installation
- Run TWRN
- Going to wipe ( data/factory reset ) 3 times
- Going to wipe ( cache ) 3 times
- Select install zip from sdcard (First AOKP, then Google Apps)
- Reboot
Alright, does that look good to you? Do I have your blessings.
Dove99x said:
Thanks, you guys have been extremely helpful.
I'm about to install the rom now, I wanted your insight into if its a good rom and if I'm doing everything right.
- I've made a backup using TWRN
- Downloaded Titanium Backup, made another backup (Not sure what this will do)
- Changed Rom to AOKP Milestone 1 ( aokp_d2tmo_jb_milestone-1 )
- Downloaded Google Apps ( gapps-jb-20121212-signed )
Installation
- Run TWRN
- Going to wipe ( data/factory reset ) 3 times
- Going to wipe ( cache ) 3 times
- Select install zip from sdcard (First AOKP, then Google Apps)
- Reboot
Alright, does that look good to you? Do I have your blessings.
Click to expand...
Click to collapse
Looks good, but also wipe system
Sent from my SGH-T999 using xda premium
serio22 said:
Looks good, but also wipe system
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
What's your opinion on AOKP nightly build JB-MR1 ( aokp_d2tmo_jb-mr1_build-2 ). I was looking into this because it has 4.2.1 jellybean and it was suggested I avoid CM 10.1 nightly.
Hi guys how come evertime I try to install a custom rom its gives me the Error 7 (Status 7 Error). Have anyone encountered this before? How do I fix it? I tried updating my CWM but still, nothing works, I tried to install Cyanogenmod 10.1 and DarthStalker but it gives me that error. Help please, Thanks in advance :thumbup:
What version of CWM are you using? Number, please.
Do you currently have a ROM on the phone? If you go into About phone from the system settings, what phone model does it say you have?
Its says I have SGH-T999
Sent from my SGH-T999 using xda app-developers app
Are you updating CWM with ROM Manager?
Factory reset, wipe cache, and you should be able to install any ROM without any issues.
Sent from my SGH-T999 using xda app-developers app
Yes I updated my CWM using Rom Manager
Sent from my SGH-T999 using xda app-developers app
I've had this happen many many times. Check the MD5. Its more than likely a bad download. Try re downloading it again.
Try transferring the download from PC to your phone. And try to flash again.
Sent from my SGH-T999 running Chihuahua v1 ROM
re: error 7 issues
CooLoL1999 said:
Hi guys how come evertime I try to install a custom rom its gives me the Error 7 (Status 7 Error). Have anyone encountered this before? How do I fix it? I tried updating my CWM but still, nothing works, I tried to install Cyanogenmod 10.1 and DarthStalker but it gives me that error. Help please, Thanks in advance :thumbup:
Click to expand...
Click to collapse
Most likely you tried to flash some rom which was not 100% compatible with your phone.
If you can get into CWM or TWRP recovery just do a factory reset/wipe cache/wipe dalvik cache.
Do NOT wipe or format SYSTEM . This should allow your phone to boot completly.
Be sure NOT to try flashing the same rom which gave you the error 7.
If you are still having problems then continue reading...
If you have a cwm/twrp backup (nandroid) of your previous rom go back into cwm or twrp
and restore your nandroid backup.
If you don't have a nandroid backup but you do have a proper zip file custom rom saved to your sdcard
then you can flash the rom making sure you first do a factory reset/wipe cache/dalvik and system.
After that you can start over again but be sure to make a nandroid backup first.
If you still have problems after doing the above you will need to ODIN flash the stock-rooted
Samsung Galaxy S3 T999 Jellybean v4.1.1 firmware.
P.S. You would NEVER get an ERROR 7 if you would only flash stock based "Samsung Galaxy S3 T999 Jellybean v4.1.1 custom roms"
instead of those CM/AOKP/AOSP or Ported roms.
Good Luck!
CooLoL1999 said:
Hi guys how come evertime I try to install a custom rom its gives me the Error 7 (Status 7 Error). Have anyone encountered this before? How do I fix it? I tried updating my CWM but still, nothing works, I tried to install Cyanogenmod 10.1 and DarthStalker but it gives me that error. Help please, Thanks in advance :thumbup:
Click to expand...
Click to collapse
First of all, make sure that you redownload the ROM, check that the MD5's match, and that you are indeed on the latest CWM recovery.
Secondly, I've heard of these status 7 errors, even when on the latest CWM recovery. There's times when installing certain ROMs where these errors occur, which usually happens when the ROM’s updater script file checks to see if the phone model of your phone is compatible with the ROM you are installing and this portion of the script are called “asserts”. with this it prevents you from accidentally flashing a ROM intended for a different model.
Normally you can fix the issue by installing TWRP recovery but there's another possible solution for this if the TWRP method doesn't solve it but take some serious precaution. You need to be very careful and do this at your own risk.
Follow this step by step guide
http://highonandroid.com/android-roms/how-to-fix-status-7-error-with-cwm-recovery-on-rooted-android/
Following this will remove the asserts thus removing protection upon flashing the wrong ROM. Do if you choose to follow this make absolutely sure that the ROM you're flashing is for the T999.
Sent from my SGH-T999 using xda premium
---------- Post added at 01:57 AM ---------- Previous post was at 01:40 AM ----------
Status 7 errors can very well still occur through CWM recovery on stock based ROMs.. It mostly all depends on the ROMs updater script and if the dev accidentally made an error within that, which is why the asserts would normally correct that error by forcing the ROM to be flashed regardless.
Sent from my SGH-T999 using xda premium
Everyone, Thanks for helping me out, I flash back to stock firmware, I found out that I rooted my phone the wrong way (Qbking's Video). I tried rerooting but I used a different method and updated CWM, now works completely fine, Thanks for all your help!! :thumbup::thumbup:
Sent from my SGH-T999 using xda app-developers app
When I try to install Hyperdrive rom latest release 15 I select all i want in the aroma but then it starts to install only the apps i chose. It is not installing any of the mandatory system files which makes sense why it installs in like 10 seconds.. I wipe everything sys, delvik cache, cache, data.. using TWRP 2.7.0.1
please help me
This is also happening when I try to install Wicked Rom so ANY suggestions would be awesome. I'm probably going to return to stock and then flash new rom
after reinstalling stock firmware through odin and then trying to install a custom rom same thing is still happening so im guessing i should try and go to stock and than completely wipe everything and then try from there?
I'd install a ROM that doesn't have an aroma installer. Then install the one you want with aroma.
Sent from my SGH-M919 using XDA Premium 4 mobile app
After successfully installing stock and TWRP recovery 2.7.0.1
I took your advice and tried install gpe rom and still after rebooting i just get a black boot screen samsung galaxy s4 screen
Is there more i could wipe like a partition that is still bad maybe?
I'm going to go to stock again but this time with odin 3.07 not what i was using which was a much older odin and im going to then install a custom recovery and root and please do tell me your favorite recovery im probably gonna try oudhs cwm and then ill see if i run into problems installing roms.
The main problem is the rom likes to install all its apk options for example adobe reader or samsung music app but it will NOT install any mandatory system files which make the phone work.
after i get stock i also wipe data factory reset in stock recovery which delete everything which is fine i knew it would.
This time i'll also be resetting the flash counter which i havent done
Have you tried using clockworkmod recovery with ROM manager?
Sent from my SGH-M919 using XDA Premium 4 mobile app
Android_Monsters said:
Have you tried using clockworkmod recovery with ROM manager?
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I haven't but i will try. At the moment i am at stock firmware and I would like to know what my filesystem should look like.. When I go into just "/" section before sdcard it shows me lots of folders some looking unnessary and maybe in the way of installing my rom normally View attachment 2650548
View attachment 2650549
View attachment 2650550
Could this be a bootloader issue or something with my filesystem because I can tell these roms are all avoiding like half of their installation. They should be extracting more files and take more than 20 seconds to install
Which bootloader do you have?
Sent from my SGH-M919 using XDA Premium 4 mobile app
How do I see what kind of bootloader i have i search google and im still unsure.
And do you think i could try deleting everything in my filesystem and then odin stock flash and then try to flash rom?
In settings, about phone what is your baseband? Mine for example is FNB4.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Reinstalling stock for 4th time when i get it up ill give you that baseband version.
I was looking on Odin at this Nand erase all and i googled alot and looked around but i don't think its useful in my case so i wont check it
there was a thread saying that you could repair your phone if your data was set to a read only not write but i checked with adbshell mount and all my stuff is rw so im good there..
I haven't ever had a problem where rom doesn't fully install..
I was minding my own business on GPe rom from Kot94h and it was good but i decided hmm this has been my daily driver for queit some time ill switch to hyper drive and bamm i realize stuff isn't going right.
My Baseband Version is M919UVUAMDL
on Android 4.2.2
I feel like I've tried every trick in the book with no success
I'm wondering if it's the team win recovery. I'd try cwm.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Karakoram2 said:
I'm wondering if it's the team win recovery. I'd try cwm.
Sent from my SGH-M919 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I've tried CWM CWM-oudhs thing and ive tried team win.
for now im going to run stock and restore my stuff but hopefully i can get to the bottom of this
I can't think of where the source of the problem is.
I find it interesting how while an app installs i see it installing like system/app/blahblah.apk and that is like the first thing it starts to install
i think if i can remember a rom usually does system/framwork or something along those lines first
I have also MD5 checked all my files and they are all perfectly matching
Any Ideas?
I have this idea to try and erase every file on my device and then flash a room is that even possible
Could someone download root file explorer and go to their "/" and just snap a pic of the folders i want to compare your folders properties for example one of mine say rwxr-xr-x
Or i have another idea.
Is it possible to reformat my system partition with odin maybe with a PIT file??
Think, why would a rom skip installation of system files? It looks like it blazes through the installation after installing a few system apps