Develop Bugs

Need some help please.

I have installed the cwm with no problems using ODIN. I then transfered the SU zip file to my sdcard. I booted the phone into recovery mode, found the zip file and ran it. I rebooted the phone , superuser was there. I then downloaded titanium back up from the market and installed it, it gave me an error about not having the needed permissions. I then downloaded rootchecker to see if i was rooted and it responded with not rooted. So then I ran the cwm again, and did the zip again and still not rooted. So in my ultimate noobness i figured I'd do start from scratch again and did a factory reset. Of course the CWM was still there and superuser is still on the phone. Now when I try to power the phone off it locks on the goodbye screen. I thought I did alot of reading on the tutorials and what not before I gave this ago. Any suggestions or help would be greatfully appreciated.

zstaton said:
I have installed the cwm with no problems using ODIN. I then transfered the SU zip file to my sdcard. I booted the phone into recovery mode, found the zip file and ran it. I rebooted the phone , superuser was there. I then downloaded titanium back up from the market and installed it, it gave me an error about not having the needed permissions. I then downloaded rootchecker to see if i was rooted and it responded with not rooted. So then I ran the cwm again, and did the zip again and still not rooted. So in my ultimate noobness i figured I'd do start from scratch again and did a factory reset. Of course the CWM was still there and superuser is still on the phone. Now when I try to power the phone off it locks on the goodbye screen. I thought I did alot of reading on the tutorials and what not before I gave this ago. Any suggestions or help would be greatfully appreciated.
Click to expand...
Click to collapse
can you turn the phone on at least to download mode? if so just Odin it back to factory.
http://www.google.com/url?sa=t&rct=...ePw5C8&usg=AFQjCNGJPsChjj8qf32PIyesEm7P9ObbYQ
just make sure you follow the steps for correct model. that's how i always start from scratch. afterwards reroot (which is also included on the site i posted) and install all your stuff. come back and get your prefered rom and voila. good luck

You need to make sure it's the right su file for your ROM version. ICS 4.03 uses 3.07.
Edit, originally thought you were talking about CM until I realized you were talking about CWM.

Bluntified said:
You need to make sure it's the right su file for your ROM version. ICS 4.03 uses 3.07.
Edit, originally thought you were talking about CM until I realized you were talking about CWM.
Click to expand...
Click to collapse
You do have a point, which gapps version did you try to flash?
Sent from the pink Unicorn from the Darkside.

LoopDoGG79 said:
You do have a point, which gapps version did you try to flash?
Sent from the pink Unicorn from the Darkside.
Click to expand...
Click to collapse
Sorry, I'm using Darkside Telus ICS not CM. I used su 3.07 to root.
I would assume each CM ROM has it's own gapps zip.

They are either baked in or you have to flash them separate. Usually its part of the thread if you have to or not and they will be included
Deff misread you post.. my bad.. my original response would have been still my solution. I would go back to complete stock and then reroot . Just one thing. If you already done that, did you fully factory reset from withing the phone. Maybe that could be the problem. Go to settings/ back up and reset/ factory reset. This will wipe everything that was previously installed. Make sure you do this after you unroot. And then start over from scratch. You should have no issue.
"feeding this unicorn carrots til the finish line"

Seeing as these responses your getting have nothing to do with your question .. I have a suggestion. Since you have CWM have you thought of just flashing a stock already rooted rom?
Sent from my SGH-T989 using xda app-developers app

PJcastaldo said:
Seeing as these responses your getting have nothing to do with your question .. I have a suggestion. Since you have CWM have you thought of just flashing a stock already rooted rom?
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Yeahid say just download something like darkside. Stock experience but way better performance.
Sent from my Transformer TF101 using xda app-developers app

Install CWM on new AT&T S3

Why does this never work the way its supposed to for me??
Anyway, so I just got my S3 and I hate the stock ROM already so I want to go to CM (9 maybe, 10 if it works well). I'm right now just trying to get Clockwork recovery installed and working and seem to be failing miserably. At first it seemed to be going ok, I downloaded Odin 3.04 and a recovery TAR that was on the Android Authority guide for the AT&T S3. I ran the install no problems, and booted into recovery without issue. I then tried installing CM10 and it gave and Status 7 assert failure.
After a lot of digging I finally found some people saying that it was because of an incorrect version of CWM, so I dug around till I found a 6.0.1.0 tar that says its for my phone. I install that and now I can't get into recovery at all. It will still boot into the stock rom but that's it. I saw some suggestions saying that unchecking auto reboot, and f. reset time would fix this so I did that and still nothing. I can't get into recovery at all. Is there a definitive (as in this still works) guide out there somewhere??

forwardbias said:
Why does this never work the way its supposed to for me??
Anyway, so I just got my S3 and I hate the stock ROM already so I want to go to CM (9 maybe, 10 if it works well). I'm right now just trying to get Clockwork recovery installed and working and seem to be failing miserably. At first it seemed to be going ok, I downloaded Odin 3.04 and a recovery TAR that was on the Android Authority guide for the AT&T S3. I ran the install no problems, and booted into recovery without issue. I then tried installing CM10 and it gave and Status 7 assert failure.
After a lot of digging I finally found some people saying that it was because of an incorrect version of CWM, so I dug around till I found a 6.0.1.0 tar that says its for my phone. I install that and now I can't get into recovery at all. It will still boot into the stock rom but that's it. I saw some suggestions saying that unchecking auto reboot, and f. reset time would fix this so I did that and still nothing. I can't get into recovery at all. Is there a definitive (as in this still works) guide out there somewhere??
Click to expand...
Click to collapse
Ok so I found some CWM tars that they they're v.6+ that I can get installed (at least I assume so since Odin says it worked) but when I get in there the version listed at the top is 5.5.0.4, should this number not match? I haven't even gotten around to trying to get it to install CM10 yet.

I used rom manager to flash its recovery. No problems what so ever.
Sent from my SGH-I747 using xda premium

defnow said:
I used rom manager to flash its recovery. No problems what so ever.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
By Rom Manager you are talking about the App you use from within the OS? So would I need root for this?

https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager
Installed ROM manager....opened it and click install recovery. Done. Yes, you have to be rooted to use that app.
Sent from my SGH-I747 using xda premium

defnow said:
Installed ROM manager....opened it and click install recovery. Done. Yes, you have to be rooted to use that app.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Awesome suggestion! Worked perfectly thank you!!

[Q] Rogers GS3 ROM Questions...

Hello,
New to android... I have searched and searched and read in a LOT of threads trying to get Cyogenmod 10 working on my i747m on Rogers.
I have found many guides and have managed to root my phone and tried installing Cy10 but got an error 7. I read that this was because of the wrong recovery version. I was told to get ROM manager and update through there. For me, however, the GS3 doesn't show up in the options.
Could someone please link me the correct files that I need? I think I know the steps, but it seems that all the files have different versions and are not compatible.
I'm trying to be very careful and not brick my phone, so I am reluctant to try anything that I'm not sure will work... I think that's why this is difficult (Rogers = AT&T? or not?, etc.)
Thank you in advance to anyone who is willing to take the time to help me.

I had the exact same problem as you and what I did was flash, if I remember, cm9 and go to ROM manager and then it would show me Samsung Galaxy s3(att).

You need to update your recovery I flashed the touch recovery from the toolkit and that worked for me
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

First: Thank you both for your replies!
zap12341 said:
I had the exact same problem as you and what I did was flash, if I remember, cm9 and go to ROM manager and then it would show me Samsung Galaxy s3(att).
Click to expand...
Click to collapse
Do you remember which version of cm9? I tried that last night and I still got error 7, but maybe I used the wrong version. All I could find were nightlies, no stable ones for d2att (which is what I was told was our phone)
offwiththeface said:
You need to update your recovery I flashed the touch recovery from the toolkit and that worked for me
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
What version of the toolkit? I can only find 1.0 which gives me recovery 5.5

I'm in the same place. Rooted tried cmw and touch recovery both giving errors. Rom manager from the play store doesn't have an option for a different recovery for me.
Sent from my SGH-I747M using xda app-developers app

onei0077 said:
I'm in the same place. Rooted tried cmw and touch recovery both giving errors. Rom manager from the play store doesn't have an option for a different recovery for me.
Sent from my SGH-I747M using xda app-developers app
Click to expand...
Click to collapse
I've been trying for 3 days.. I'll let you know if i find a solution (if this thread doesn't provide one that is)
(I'm in Ottawa too!)

Error 7 is means you don't have the right requirements to start with.
If you are trying to flash bell 4.1.1 on your Rogers device running 4.0.4, you must first install bell stock 4.0.4 from Sammy site or else things like will throw error 7 during install.
Read CM10 requirements carefully...

I had the same problem. I just upgraded the CWM version to the latest one using this (its the same step, just make sure you download the right recovery):
youtube.com/watch?v=rx8GuAKxzpA
Get recovery from the main CWM site:
clockworkmod.com/rommanager

[Q] Unable to flash Stock ROM

I bought a T-Mobile Galaxy S 3 LTE with model number SGH-T999L. I used Odin V3 1.85 to flash TWRP recovery and CyanogenMod 10.0.0.
Everything went well but my camera doesn't work. On launching the camera, I get a "Can't connect to camera" error and it quits. The same behavior is observed when using other camera apps. I tried the instructions in this thread(http://forum.xda-developers.com/showthread.php?t=2239414) but it did not fix my problem. I now want to go back to my stock ROM. I successfully downloaded and flashed stock recovery using Odin. However, Odin fails when I try to flash the stock ROM obtained from the samsung website. It gives me a "write failed" error and stops. Any tips or suggestions to help me out would be appreciated. Thanks

Is it supposed to use T999 firmware?

Only odin flash T999L firmware. I dont see it released yet at samsing-updates.com though.
Maybe samfirmware.com? I can look later.
Sent from my SGH-T999 using xda premium

re: sure fix
newidforu said:
I bought a T-Mobile Galaxy S 3 LTE with model number SGH-T999L. I used Odin V3 1.85 to flash TWRP recovery and CyanogenMod 10.0.0.
Everything went well but my camera doesn't work. On launching the camera, I get a "Can't connect to camera" error and it quits. The same behavior is observed when using other camera apps. I tried the instructions in this thread(http://forum.xda-developers.com/showthread.php?t=2239414) but it did not fix my problem. I now want to go back to my stock ROM. I successfully downloaded and flashed stock recovery using Odin. However, Odin fails when I try to flash the stock ROM obtained from the samsung website. It gives me a "write failed" error and stops. Any tips or suggestions to help me out would be appreciated. Thanks
Click to expand...
Click to collapse
Why not reflash the stock ODIN flash rom and make sure it all works ok for you, that will tell you exactly what the problem is.
If the stock rom is working properly, then there is only one thing left which is the culprit and that is the CM10/AOKP/AOSP
or PORTED roms which many people seem to like flashing.
The CM10/AOKP/AOSP and ported roms are excellent if you are a developer or if you like to do a lot of experimentation with your phone.
So the thing to do now is reboot your phone to recovery mode, do a "Factory Reset", "Wipe Cache", "Wipe System" and "Wipe Dalvik".
When that's done Open Odin and put the stock rooted T999 Tmobile Jellybean 4.1.2 into Odin's PDA slot, go into download mode
and once you see Odin is connected to the phone start the flash. Have patience for the phone to boot after its done flashing.
Here is the stock rooted Odin flash T999 Tmobile Jellybean 4.1.2 rom that you can download if you like: T999_UVDMD5
Official JB Firmware - Latest JB 4.1.2 Firmware
My suggestion to you is to only flash Samsung T999 Tmobile stock based Jellybean 4.1.1 or 4.1.2 roms in the future.
But who am I to say whats best..... This is just my personal opinion...... Which usually is not worth a dime. LOL

Sorry, but untill we know more about it, I would not flash T999 firmware onto the T999L.
Its only been out a day and tgey are different model phones with different hardware.
If you decide to try anyway, please post your results
Sent from my SGH-T999 using xda premium

DocHoliday77 said:
Sorry, but untill we know more about it, I would not flash T999 firmware onto the T999L.
Its only been out a day and tgey are different model phones with different hardware.
If you decide to try anyway, please post your results
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I am a newbie. I thought the T999 was the same as the T999L. That would explain why Odin doesnt flash stock T999 onto my device. Can anyone here post a link to the stock SGH-T999L ROM?

Just did a quick check and I dont see that the firmware has been made available for download yet.
If you want stock I would flash one of the stock based custom roms via recovery for now.
Out of curiosity, what is your current baseband version?
Sent from my SGH-T999 using xda premium

DocHoliday77 said:
Just did a quick check and I dont see that the firmware has been made available for download yet.
If you want stock I would flash one of the stock based custom roms via recovery for now.
Out of curiosity, what is your current baseband version?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Baseband version is T999LUVAMB7. Still waiting for stock ROM to be released on samsung-updates or sammobile.

newidforu said:
Baseband version is T999LUVAMB7. Still waiting for stock ROM to be released on samsung-updates or sammobile.
Click to expand...
Click to collapse
I had the same issue with the same phone. Got it 2 weeks ago haha. Did you happen to make a backup first using CWM Recovery? If so, you can just restore that backup and you'll have your camera functionality back. It's pretty annoying switching back and forth from CM10.1 back to stock just to take pictures but Rom manager makes it pretty quick and effortless.

Actually now that I think of it, they prob wont release the original firmware. Seems like the first build is never available, only when an update is released do we get firmware we csn download.
I am working with another member on getting something going for the T999L, but right now we are stuck until a verified safe method of rooting is found. (Dont want to flash a recovery or cf autoroot w/o knowing it wont screw something up)
Itll happen, but we just gotta be patient.
Just reread the op and see that you say you flashed TWRP. So you were able to initially gain root without any problems?
Sent from my SGH-T999 using xda premium

DocHoliday77 said:
Actually now that I think of it, they prob wont release the original firmware. Seems like the first build is never available, only when an update is released do we get firmware we csn download.
I am working with another member on getting something going for the T999L, but right now we are stuck until a verified safe method of rooting is found. (Dont want to flash a recovery or cf autoroot w/o knowing it wont screw something up)
Itll happen, but we just gotta be patient.
Just reread the op and see that you say you flashed TWRP. So you were able to initially gain root without any problems?
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I used Odin to flash Clockwork Mod recovery first. I did not like Clockwork Mod's interface and reflashed with TWRP. I had no problems to gain root with either of these methods. I also tried Cyanogenmod stable 10.0.0 and then 10.1 RC2 without any problems. As far as I can tell, all apps work except for the camera. One word of caution though. As you can see from my posts, I am new and dont know what I am doing. I might have just gotten lucky since my device is still unbricked. I had only one "scary" moment during the entire process. I used TWRP to wipe my phone clean and was stuck with no OS install file. ADB sideload did not work since it could not recognize the device at that point. Luckily, I had a micro SD card lying around and was able to put in a new OS install file using my laptop and then TWRP was able to handle it.

tsticge aye
faytx1 said:
I had the same issue with the same phone. Got it 2 weeks ago haha. Did you happen to make a backup first using CWM Recovery? If so, you can just restore that backup and you'll have your camera functionality back. It's pretty annoying switching back and forth from CM10.1 back to stock just to take pictures but Rom manager makes it pretty quick and effortless.
Click to expand...
Click to collapse
Wish I had made a backup! Could you zip up the files contained inside "/system/cameradata/" folder and post a link here? It would help me and anyone else with the same problem restore the camera's functionality. In case you want to try it out, follow the instructions in this link but using the files from your stock backup
http://forum.xda-developers.com/showthread.php?t=2239414

newidforu said:
Wish I had made a backup! Could you zip up the files contained inside "/system/cameradata/" folder and post a link here? It would help me and anyone else with the same problem restore the camera's functionality. In case you want to try it out, follow the instructions in this link but using the files from your stock backup
http://forum.xda-developers.com/showthread.php?t=2239414
Click to expand...
Click to collapse
Here is the cameradata folder from the T999L.
http://d-h.st/Ciy
Good Luck!

How did you get Cyanogenmod installed on the t999l every time i try it aborts with status 7

Mine was failing with this same error. I reverted back to stock, re rooted, then downloaded the flash directly to the phones internal storage. Worked like a champ. I think in my case, there is an issue with the SD card, its kind of old.
Sent from my SGH-T999 using xda app-developers app

Beefstew said:
Mine was failing with this same error. I reverted back to stock, re rooted, then downloaded the flash directly to the phones internal storage. Worked like a champ. I think in my case, there is an issue with the SD card, its kind of old.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
You reverted to stock on the T999L? please exspain how that was done

Re flashed stock ROM using Odin. I believe I got the file from Samsung's website, but I'm not positive of that. I do know its huge, over 1 gig. If you need help with the re flash I know there are already how to's on here about that, so I won't go into it here.
Sent from my SGH-T999 using xda app-developers app

You must be using a T999 as your sig indicates, not a T999L. Am I correct?
Sent from my SGH-T999 using xda premium

Don't I feel like a tool now. Yes Doc, plain old t999 here. Now that I read back through the whole thread here I see that I was being a bit redundant. Now I will return to my closet under the stairs.
Sent from my SGH-T999 using xda app-developers app

No worries! We all do stuff like that from time to time!
Sent from my SGH-T999 using xda premium

Root issues (moved from Virgin rom as requested) Help

I am trying to upgrade my Virgin ROM to the 9.12 build but get a fail upon trying to flash it. The background.... I'm using TWRP recovery and have tried the chainfire root method. Here are the results:
As you can see you can see some conflicting information... all shots were taken in sequence. I'm thinking the fail in twrp is coming from the system not having root but the info is telling me otherwise....

Bump... Anybody???
Sent from my GT-I9505G using xda app-developers app

th3h0ff said:
Bump... Anybody???
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
Do you have the latest SuperSU version?

I'm a little lost at what you are saying.
You flashed a rom, and it said fail, and you think it has to do with Root?
If you have TWRP installed it doesn't matter if you are rooted or not. It's going to over right the system partition regardless if you have root or not.
So it's either a bad download or bad transfer for it to fail.
Sent from my SGH-M919 using Tapatalk 4

I do have the latest SU version by chain fire. And maybe I'm doing something wrong the because I am running the virgin gpe ROM now and that flashed in twrp with no issues. Now when I go to install (after wiping) and select the 9.12 update that I downloaded it hangs on trying to open the zip and fails... I haven't changed any twrp settings but in the write options of twrp what boxes should be checked because system is not by default... Thanks for the replies!
Sent from my GT-I9505G using xda app-developers app

I previously only used cwm so I'm not sure if I should just try that or what... And I've checked the download and md5 for verification
Sent from my GT-I9505G using xda app-developers app

th3h0ff said:
I previously only used cwm so I'm not sure if I should just try that or what... And I've checked the download and md5 for verification
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
You can give CWM a try, I've been using it for a while without any issues. Out of curiosity what version if TWRP you are using? I think most people recommend TWRP 2.5.0.2. I'm using the latest version of CWM.
Sent from my GT-I9505G using xda app-developers app

If all else fails, just start from scratch, get stock UVUAMDL tar, flash it with Odin, make sure to do a factory wipe after you flash it, sometimes bootloops occur if you don't. You don't even have to go past the first screen where you pick the language. Just shut it down from there and boot into download mode and root with Chainfire with Odin, then shut down and boot up again into download mode again and flash custom recovery tar of ur choice with Odin. Then download whatever custom rom zip and install it via custom recovery.

norml said:
If all else fails, just start from scratch, get stock UVUAMDL tar, flash it with Odin, make sure to do a factory wipe after you flash it, sometimes bootloops occur if you don't. You don't even have to go past the first screen where you pick the language. Just shut it down from there and boot into download mode and root with Chainfire with Odin, then shut down and boot up again into download mode again and flash custom recovery tar of ur choice with Odin. Then download whatever custom rom zip and install it via custom recovery.
Click to expand...
Click to collapse
Thanks again to everyone... not going to have time to mess with it tonight but I'll update tomorrow. Thanks again

th3h0ff said:
Thanks again to everyone... not going to have time to mess with it tonight but I'll update tomorrow. Thanks again
Click to expand...
Click to collapse
heyyy saw your reply in my thread.
just as @byron1985 suggested there, it sounds like you got a bad download. the flashing scripts are essentially exactly the same from previous version. the flashing process has absolutely zero to do with SuperSU.
edit: re-read. so you've verified the download. if you had success with CWM previously, i would go back to that. i do not use TWRP.

mrvirginia said:
heyyy saw your reply in my thread.
just as @byron1985 suggested there, it sounds like you got a bad download. the flashing scripts are essentially exactly the same from previous version. the flashing process has absolutely zero to do with SuperSU.
edit: re-read. so you've verified the download. if you had success with CWM previously, i would go back to that. i do not use TWRP.
Click to expand...
Click to collapse
Im going to give the twrp 2.5.2 a try as it seems most of my troubles keep happening on the 2.6.3 build. Hopefully that works either way its back to CWM for me as well. Thanks again for taking the time to help out and again sorry about hijacking the thread for a page... Your ROM is absolutely perfect so I appreciate the efforts and time!,
Andrew

SOLVED... tried 2.5 version of TWRP and all went well... odd but apparently my device doesnt like 2.6 versions of TWRP! Thanks to everyone who helped me out and gave me suggestions and thank you to the dev for taking some of his time to assist! It was a great help to me!

th3h0ff said:
SOLVED... tried 2.5 version of TWRP and all went well... odd but apparently my device doesnt like 2.6 versions of TWRP! Thanks to everyone who helped me out and gave me suggestions and thank you to the dev for taking some of his time to assist! It was a great help to me!
Click to expand...
Click to collapse
Good to know you are out of trouble
Sent from my Nexus 10 using xda app-developers app

See you shoulda said you were running 2.6.3 lol
word of advice (and to all who run twrp)
DO NOT RUN ANYTHING GREATER THAN 2.5.2!!!!!!!!!!!!!!