I am trying to upgrade my Virgin ROM to the 9.12 build but get a fail upon trying to flash it. The background.... I'm using TWRP recovery and have tried the chainfire root method. Here are the results:
As you can see you can see some conflicting information... all shots were taken in sequence. I'm thinking the fail in twrp is coming from the system not having root but the info is telling me otherwise....
Bump... Anybody???
Sent from my GT-I9505G using xda app-developers app
th3h0ff said:
Bump... Anybody???
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
Do you have the latest SuperSU version?
I'm a little lost at what you are saying.
You flashed a rom, and it said fail, and you think it has to do with Root?
If you have TWRP installed it doesn't matter if you are rooted or not. It's going to over right the system partition regardless if you have root or not.
So it's either a bad download or bad transfer for it to fail.
Sent from my SGH-M919 using Tapatalk 4
I do have the latest SU version by chain fire. And maybe I'm doing something wrong the because I am running the virgin gpe ROM now and that flashed in twrp with no issues. Now when I go to install (after wiping) and select the 9.12 update that I downloaded it hangs on trying to open the zip and fails... I haven't changed any twrp settings but in the write options of twrp what boxes should be checked because system is not by default... Thanks for the replies!
Sent from my GT-I9505G using xda app-developers app
I previously only used cwm so I'm not sure if I should just try that or what... And I've checked the download and md5 for verification
Sent from my GT-I9505G using xda app-developers app
th3h0ff said:
I previously only used cwm so I'm not sure if I should just try that or what... And I've checked the download and md5 for verification
Sent from my GT-I9505G using xda app-developers app
Click to expand...
Click to collapse
You can give CWM a try, I've been using it for a while without any issues. Out of curiosity what version if TWRP you are using? I think most people recommend TWRP 2.5.0.2. I'm using the latest version of CWM.
Sent from my GT-I9505G using xda app-developers app
If all else fails, just start from scratch, get stock UVUAMDL tar, flash it with Odin, make sure to do a factory wipe after you flash it, sometimes bootloops occur if you don't. You don't even have to go past the first screen where you pick the language. Just shut it down from there and boot into download mode and root with Chainfire with Odin, then shut down and boot up again into download mode again and flash custom recovery tar of ur choice with Odin. Then download whatever custom rom zip and install it via custom recovery.
norml said:
If all else fails, just start from scratch, get stock UVUAMDL tar, flash it with Odin, make sure to do a factory wipe after you flash it, sometimes bootloops occur if you don't. You don't even have to go past the first screen where you pick the language. Just shut it down from there and boot into download mode and root with Chainfire with Odin, then shut down and boot up again into download mode again and flash custom recovery tar of ur choice with Odin. Then download whatever custom rom zip and install it via custom recovery.
Click to expand...
Click to collapse
Thanks again to everyone... not going to have time to mess with it tonight but I'll update tomorrow. Thanks again
th3h0ff said:
Thanks again to everyone... not going to have time to mess with it tonight but I'll update tomorrow. Thanks again
Click to expand...
Click to collapse
heyyy saw your reply in my thread.
just as @byron1985 suggested there, it sounds like you got a bad download. the flashing scripts are essentially exactly the same from previous version. the flashing process has absolutely zero to do with SuperSU.
edit: re-read. so you've verified the download. if you had success with CWM previously, i would go back to that. i do not use TWRP.
mrvirginia said:
heyyy saw your reply in my thread.
just as @byron1985 suggested there, it sounds like you got a bad download. the flashing scripts are essentially exactly the same from previous version. the flashing process has absolutely zero to do with SuperSU.
edit: re-read. so you've verified the download. if you had success with CWM previously, i would go back to that. i do not use TWRP.
Click to expand...
Click to collapse
Im going to give the twrp 2.5.2 a try as it seems most of my troubles keep happening on the 2.6.3 build. Hopefully that works either way its back to CWM for me as well. Thanks again for taking the time to help out and again sorry about hijacking the thread for a page... Your ROM is absolutely perfect so I appreciate the efforts and time!,
Andrew
SOLVED... tried 2.5 version of TWRP and all went well... odd but apparently my device doesnt like 2.6 versions of TWRP! Thanks to everyone who helped me out and gave me suggestions and thank you to the dev for taking some of his time to assist! It was a great help to me!
th3h0ff said:
SOLVED... tried 2.5 version of TWRP and all went well... odd but apparently my device doesnt like 2.6 versions of TWRP! Thanks to everyone who helped me out and gave me suggestions and thank you to the dev for taking some of his time to assist! It was a great help to me!
Click to expand...
Click to collapse
Good to know you are out of trouble
Sent from my Nexus 10 using xda app-developers app
See you shoulda said you were running 2.6.3 lol
word of advice (and to all who run twrp)
DO NOT RUN ANYTHING GREATER THAN 2.5.2!!!!!!!!!!!!!!
Related
Hi there fellow note users. I am currently using CWM and running the ported ROM with MultiView on my AT&T i317 Note2. I can't seem to get TWRP to take at all. I've tried 4 methods... flashing over in recovery, Oden, terminal and Goo Manager. All getting errors without install. Help please
Sent from my SAMSUNG-SGH-I317 using xda premium
mr1080p said:
Hi there fellow note users. I am currently using CWM and running the ported ROM with MultiView on my AT&T i317 Note2. I can't seem to get TWRP to take at all. I've tried 4 methods... flashing over in recovery, Oden, terminal and Goo Manager. All getting errors without install. Help please
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
I used goo manager after going to this link http://teamw.in/project/twrp2 and selecting my device. Pretty easy install from the goomanager. Then from goomanager I "reboot into recovery".
SysAdmNj said:
I used goo manager after going to this link http://teamw.in/project/twrp2 and selecting my device. Pretty easy install from the goomanager. Then from goomanager I "reboot into recovery".
Click to expand...
Click to collapse
Yeah I did that that first time and it didn't work. I get that little Android guy laying down dead with his heart out. Are you using a different kernel? I'm running stock.
Sent from my SAMSUNG-SGH-I317 using xda premium
mr1080p said:
Yeah I did that that first time and it didn't work. I get that little Android guy laying down dead with his heart out. Are you using a different kernel? I'm running stock.
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
U have to make sure u are rooted first.
Sent from the TermiNOTEr!
mr1080p said:
Yeah I did that that first time and it didn't work. I get that little Android guy laying down dead with his heart out. Are you using a different kernel? I'm running stock.
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Im not running any other kernel. All I've done so far is root and twrp.
I believe you installed cwm? and a ported rom as well?
SysAdmNj said:
Im not running any other kernel. All I've done so far is root and twrp.
I believe you installed cwm? and a ported rom as well?
Click to expand...
Click to collapse
Yes. CWM and ported ROM. Everything works well I just want TWRP. But I guess I'll do with CWM. If it aint broke then why fix it. It works I guess. Thanks.
Sent from my SAMSUNG-SGH-I317 using xda premium
Check your build prop for device name. Maybe its not correct because of the Rom you're on. Whats the error you're getting?
Did you ever get TWRP on your phone?
I've had goofy issues with TWRP but much prefer it to CWM. Originally rooted using CWM and SuperSu and switched to TWRP when I flashed CleanRom several times via Romtoolbox pro I've flashed updated Twrp it said it was successful but when it rebooted was soft bricked! Had to use Odin and original CWM to get back in and re-install everything (nandroids were twrp backups) found file downloaded to sdcard that worked fine! Odd...
How can you wipe out all installed recoveries and start fresh? Via adb? Like to wipe Everything n start fresh advice? Running TWRP 2.4X -==
wargear said:
How can you wipe out all installed recoveries and start fresh? Via adb? Like to wipe Everything n start fresh advice? Running TWRP 2.4X -==
Click to expand...
Click to collapse
If by "installed" you are referring to the recovery program itself (and not your backups), you can only have one recovery 'installed' at one time as there is only 1 "Recovery" partition on the device (/dev/block/mmcblk0p9). So if you want to install CWM instead of your current TWRP (or visa-versa), either flash the appropriate new recovery zip via your current recovery... or Odin3 flash your desired new recovery tar. Either way, it will write to the same recovery partition. If you are referring to your backups... these are stored in the designated path you selected (either internal sd or external sd)... in the TWRP/BACKUPS folder. In that folder, you will have a device id #... in that folder are your backups.
Gotcha! Thanks the way it acted I wondered if there were "leftovers" in recovery partition or corrupt data. When I reflashed CWM or TWRP via ODIN it didn't say "Passed" instead "RESET" and I had to unplug phone and manually boot recovery which sometimes took a couple tries... Only boxes checked in Odin are reset time and reboot.
wargear said:
Gotcha! Thanks the way it acted I wondered if there were "leftovers" in recovery partition or corrupt data. When I reflashed CWM or TWRP via ODIN it didn't say "Passed" instead "RESET" and I had to unplug phone and manually boot recovery which sometimes took a couple tries... Only boxes checked in Odin are reset time and reboot.
Click to expand...
Click to collapse
Which version of Odin3 are you using? When I used Odin3 v1.85 I would get the "PASSED" but with Odin3 v3.07, I also only got "RESET" (on an WindowsXP box)... but both flashed it correctly (and auto rebooted after flash)
Galaxy Note2 TOOLKIT V3.0.0 ATT]
I tried the [Galaxy Note2 TOOLKIT V3.0.0 ATT] http://forum.xda-developers.com/showthread.php?t=2052779 out of curiosity sake. Worked for me installing TWRP 2.3.2.3 without a hitch. Great tool from what I can see, and that's just one of it's many features. Great for simplifying things for new Android users just entering the customizing scene and regulars alike. Big ups to mskip for making this available. I can foresee myself grabbing the donate version here real soon.
And to get yourself SIM unlocked, get yourself back to 4.1.1 and give this a whirl.http://forum.xda-developers.com/showthread.php?t=2014982 Bought my device used, was supposedly unlocked, wasn't. Even came with an unlock code that the previous owner purchased. Firstly it's a no go on 4.1.2, secondly still didn't work when I dropped back to 4.1.1. But this http://forum.xda-developers.com/showthread.php?t=2014982 will set you free. Big thanks owl74 for posting. Once again XDA forums saves my hair from being pulled out.
Hi,
I'm having issues installing CWM Recovery on my Rooted GN2. It's the Canadian variant, SGH-I317M.
It does go through the process of flashing the recovery, but never gets to saying PASS in ODIN. When I try to get into the Recovery, it still has the stock Samsung Recovery. It does, however trip the flash counter.
I'm followiing the instructions here: http://forum.xda-developers.com/showthread.php?t=1988785
This is what I get after flashing in ODIN.
Maybe a bad download? Have you checked to see if it installed? I dont usually recommend this but koush's Rom Manager supports our device now, you can use the app to flash it if your already rooted:thumbup:
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
In your screen shot it shows the f-reset box checked I believe it should be unchecked.
Slff said:
In your screen shot it shows the f-reset box checked I believe it should be unchecked.
Click to expand...
Click to collapse
I tried it with the f-reset box unchecked, and I got it to say PASS, but still no CWM...
cdshepherd said:
Maybe a bad download? Have you checked to see if it installed? I dont usually recommend this but koush's Rom Manager supports our device now, you can use the app to flash it if your already rooted:thumbup:
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
I've also tried to download the file again, and still... No dice...
BlueBagodah said:
I tried it with the f-reset box unchecked, and I got it to say PASS, but still no CWM...
I've also tried to download the file again, and still... No dice...
Click to expand...
Click to collapse
Try rom manager?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
cdshepherd said:
Try rom manager?
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
Click to expand...
Click to collapse
ROM Manager doesn't have a Recovery for the Rogers i317M...
http://forum.xda-developers.com/showthread.php?t=1988785
Sent from my SAMSUNG-SGH-I317 using xda premium
twanskys204 said:
http://forum.xda-developers.com/showthread.php?t=1988785
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Thanks,
I've been following that thread, and it doesn't work. It will trip the flash counter, but doesn't actually install the recovery. It appears that I'm not the only one having this issue after the most recent OTA update...
Can u try and flash a kernel
Then try flashing cwm ...just a hunch
Sent from my SAMSUNG-SGH-I317 using xda premium
BlueBagodah said:
Thanks,
I've been following that thread, and it doesn't work. It will trip the flash counter, but doesn't actually install the recovery. It appears that I'm not the only one having this issue after the most recent OTA update...
Click to expand...
Click to collapse
I'm also having problems after the OTA update. Before OTA update, I was able to flash CWM without problems. Following exact same procedure as before when it was working. Only variable that changed is the OTA update.
wiser212 said:
I'm also having problems after the OTA update. Before OTA update, I was able to flash CWM without problems. Following exact same procedure as before when it was working. Only variable that changed is the OTA update.
Click to expand...
Click to collapse
I was able to install CWM by following this post: http://forum.xda-developers.com/showpost.php?p=36201055&postcount=54
But I'm starting to think that it may have been my fault the whole time...
While doing the 3 button combo to try to boot into Recovery, I was using Vol-DOWN, instead of Vol-UP. So I was going into download mode. I'm going to try flashing the CWM through ODIN again and see if I was just an idiot the whole time.
***EDIT***
It looks like I was just an idiot the whole time...
*facepalm*
Sent from my SAMSUNG-SGH-I317 using Tapatalk 2
.. so ROM manager doesnt work to insall cwm recovery after rooting on the i317m? i tried it and didnt succeed. i guess flashing is my only option but i dont want to lose anything on my phone. just install the bootloader/ recovery with no other changes. i want to start flashing some roms... jedi first.. skynote after.. any thoughts or help would be great!!
Clean rom I would suggest its awesome battery life I have a universal theme flashed over clean rom and a custom blue keyboard if I find the link to the themes ill post em on here
Sent from my sgh-1317 aka MY BLUE DEVIL using xda premium
Dewaynelives said:
Clean rom I would suggest its awesome battery life I have a universal theme flashed over clean rom and a custom blue keyboard if I find the link to the themes ill post em on here
Sent from my sgh-1317 aka MY BLUE DEVIL using xda premium
Click to expand...
Click to collapse
I thought of cleanROM but it is pretty stock. I feel if im going to flash any rom i might as well go with something modded and tweaked rather then stock, while keeping most of the note 2 and s-pen features. If i start finding them being a little buggy or draining my battery or anything, ill settle with cleanROM and just flash some custom mods.
i flashed my CWM through MobileODIN. worked like a charm. then i ran into issues with backing up to extSD, which ended up working after i formatted it but i took way longer then onto internal SD.
i know its off topic for this thread..Any suggestions or thoughts on the JEDI X9 and SKYNOTE roms will be great guys. Im all backed up and ready to flash pretty quick here.
I guess you have custom ROM. You must root and rename recovery restore files before you boot to android or stock recovery will be restored.
Hello and thanks to all those before me who give great advice on troubleshooting....
Here's my situation:
Phone is Rooted.
I downloaded an app a few days ago from the Play Store, so I could move my app installs to the sdcard. When i installed the app it said that there was something wrong " can't remember the exact message " and it needed to fix it. My dumbass allowed it to fix it and here is where my problems began.
Right after that I began receiving a message "Shell has been granted Super User", phone began to run sluggish and the Play Store App would always say it was crashing.
So I figured, screw it I would format and start w/a new ROM anyway.... I did not have any sort of backup (of course dumbass)
However I loaded up the latest version of Odin 3.09 and just incase I installed the root.zip again incase that was destroyed. Then I installed the latest version of OUDHS CWM-Based Recovery 1.0.3.3 ( Previously I had TWRP )
I downloaded a few different roms so I could see what I wanted...However...here's where things get interesting, and I did do some research on it but couldn't find a way to resolve the 1st problem.
When I first started to install a ROM, don't remember which one I was getting a signature verification failed....I had read that it could be 2 things, one the MD5 was bad, I verified that, so that wasn't the issue. Then I came across that it may have been a ROM that my device(Samsung) somehow knew wasn't approved, therefore prevented it from being installed....OK fine...
Next I found a ROM that was going to work via installing...So i picked the CM10.2 and wiped/format/davik/cache...etc... Installation took a few mins...Then when I rebooted, it's been on the Cyangenmod screen for 45 mins +....
Is there anyway I can do some verification that something further isn't interfering w/my installs?
Thanks in advance and any guidance is GREATLY appreciated...
Regards
Erik
Odin to stock and try that, always the best choice
Sent from my SGH-M919 using xda app-developers app
aamir123 said:
Odin to stock and try that, always the best choice
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Actually I tried that and I used this one from stockroms.net TMB-M919UVUAMDL-1366964131.zip
the verification failed immediately, however, when I checked it w/the MD5 hash on my computer it checks out...That's where I'm wondering if there is something else going on...
Or are you talking about something else regarding stock? If so could you clarify...Thanks
Use sam mobile.com
And flash the mdl fw from there. Also you may have to unzip the original file to get a tar file
Sent from my SGH-M919 using xda app-developers app
aamir123 said:
Use sam mobile.com
And flash the mdl fw from there. Also you may have to unzip the original file to get a tar file
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Just wanted to say thank you for your help. Both the flashing the recovery back to default and the default ROM worked. Now in the future no more clicking yes when I don't have a backup
Have a great weekend!!
oregongreen said:
Just wanted to say thank you for your help. Both the flashing the recovery back to default and the default ROM worked. Now in the future no more clicking yes when I don't have a backup
Have a great weekend!!
Click to expand...
Click to collapse
glad it worked out for you, I know it can be scary to think you screwed up your phone.
Glad you solved it, ALWAYS MAKE A BACKUP
Sent from my customizable brickable device
mrhughy said:
Glad you solved it, ALWAYS MAKE A BACKUP
Sent from my customizable brickable device
Click to expand...
Click to collapse
This can nvr be said enough.
I accidentally installed the wrong kernel on my Galaxy Note 2 (T-Mobile T-889). I think it was a kernel for a GT-N7100. With the installation of this wrong kernel, it changed my custom recovery from TWRP to "Devil Recovery". This recovery does work, and I am able to do things with it. With it, I reinstalled the original kernel back and the phone is working (whew!!). So all is well in that regard, but I cannot seem to fix the recovery back to TWRP. When I use the Devil Recovery to install the TWRP zip (which worked ok before) it fails. I tried using Goo Manager as well, but it also fails. Is there a way to wipe this recovery so that I can reinstall TWRP??
Thank you in advance!
Wingmann
Try flashing TWRP tar via odin.
Sent from my SGH-T889 using xda app-developers app
ciphercodes said:
Try flashing TWRP tar via odin.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Good thought, and I apologize that I didn't write that into my original question. I did try to use Odin, but since the phone (sort of) thinks its now a GT-7100, I haven't been able to get Odin to recognize (connect) to the phone. I'll keep working at it!! Thank you for the idea though!
Wingmann
wingmann said:
Good thought, and I apologize that I didn't write that into my original question. I did try to use Odin, but since the phone (sort of) thinks its now a GT-7100, I haven't been able to get Odin to recognize (connect) to the phone. I'll keep working at it!! Thank you for the idea though!
Wingmann
Click to expand...
Click to collapse
You could try mobile Odin then there's no problem with connecting
Sent from my LG-D959 using Tapatalk
Hi XDA! I have a Samsung Galaxy Note 3 N900T T-Mobile. I've had custom roms such as CM11 Nightly in the past. Well after trying to do a fresh install a while back of another custom rom, my phone at first had no OS because I wiped it like a doofus. So I flashed it back to stock, 4.3 at the time. And then starting a couple weeks ago I flashed CWM using CWM Manager app. That's when the same issue that's recurring over and over, began. My phone works great as long as I never reboot into recovery. If I reboot into recovery it gets stuck in a bootloop. However I noticed tonight after trying to reboot into recovery using goo manager, I noticed the last line when it first boots, then bootloops, says Set warranty bit-recovery. If I remember correctly shouldn't it say kernel?? I know this is my fault because I'm not as knowledgable as all of you (I'm still learning on my own). SO my question is this. I want to fix this once and for all because I can't ever flash a custom rom like Darthstalker (that's the one I'd like to flash)...after several failed attempts of flashing CM for example, to no avail. What can I do to fix this once and for all and be able to flash a kernel, and Darthstalker? I can get into download mode, needless to say. ANd all the other times it's bootlooped I flashed KitKat 4.4.2 and everything works fine until i try to reboot into recovery. I am at my witts end because this i I really want a custom rom instead of flashing only the md5. Would anyone please be willing to give me a tutorial of some kind? I know it's a lot to ask but I can't find another reliable source that can explain how to do all of this. You're the only site I trust and if anyone is willing to give mea tutorial via email , PM, etc. I'd be eternally grateful beyond belief. Thank you in advance for any advice or info
I posted a few days ago about my bootlooping in the recovery. I finally fixed it by these 3 steps.
1) Odin flashed Stock 4.4.2 complete as this sets the correct boot loader.
2) I downloaded Twrp 2.7.0 the one that list KitKat (Must say this) 4.4 version.
http://goo.im/devs/OpenRecovery/hltetmo/openrecovery-twrp-2.7.0.0-hltetmo-4.4.img.tar
3) Right from Odin when flashing this you set it not to reboot, Once finished you then unplug the usb cable and pull the battery. Let is sit for about 10 sec. Then with the upVlm,Home and Power it will boot to the recovery. It first will post what you said but wait about 10 sec more twrp will come up.
4) Now you should be able to flash any rom you want. I am using axmans N3 for now works great. I will be trying CM 11 later.
5) make a backup once in Twrp
Hope this helps.
helterkelter said:
Hi XDA! I have a Samsung Galaxy Note 3 N900T T-Mobile. I've had custom roms such as CM11 Nightly in the past. Well after trying to do a fresh install a while back of another custom rom, my phone at first had no OS because I wiped it like a doofus. So I flashed it back to stock, 4.3 at the time. And then starting a couple weeks ago I flashed CWM using CWM Manager app. That's when the same issue that's recurring over and over, began. My phone works great as long as I never reboot into recovery. If I reboot into recovery it gets stuck in a bootloop. However I noticed tonight after trying to reboot into recovery using goo manager, I noticed the last line when it first boots, then bootloops, says Set warranty bit-recovery. If I remember correctly shouldn't it say kernel?? I know this is my fault because I'm not as knowledgable as all of you (I'm still learning on my own). SO my question is this. I want to fix this once and for all because I can't ever flash a custom rom like Darthstalker (that's the one I'd like to flash)...after several failed attempts of flashing CM for example, to no avail. What can I do to fix this once and for all and be able to flash a kernel, and Darthstalker? I can get into download mode, needless to say. ANd all the other times it's bootlooped I flashed KitKat 4.4.2 and everything works fine until i try to reboot into recovery. I am at my witts end because this i I really want a custom rom instead of flashing only the md5. Would anyone please be willing to give me a tutorial of some kind? I know it's a lot to ask but I can't find another reliable source that can explain how to do all of this. You're the only site I trust and if anyone is willing to give mea tutorial via email , PM, etc. I'd be eternally grateful beyond belief. Thank you in advance for any advice or info
Click to expand...
Click to collapse
I'm honestly confused on what you are asking. What bootloader are you on . Jellybean or Kit Kat. That is the big part of the question. If you are on Kit Kat you can no longer run Darthstalker as it's a 4.3 rom. Just curious because you say that you flashed 4.4.2 rom and everything works. Also, the bootloop would either be your kernel or your recovery. I would suggest Philz or Twrp 2.7 as they are both updated and will work on either bootloader.
Once you have flashed a bootloader and custom recovery NEVER USE ODIN AGAIN UNLESS YOU HAVE BRICKED YOUR PHONE.
dragonstalker said:
I'm honestly confused on what you are asking. What bootloader are you on . Jellybean or Kit Kat. That is the big part of the question. If you are on Kit Kat you can no longer run Darthstalker as it's a 4.3 rom. Just curious because you say that you flashed 4.4.2 rom and everything works. Also, the bootloop would either be your kernel or your recovery. I would suggest Philz or Twrp 2.7 as they are both updated and will work on either bootloader.
Once you have flashed a bootloader and custom recovery NEVER USE ODIN AGAIN UNLESS YOU HAVE BRICKED YOUR PHONE.
Click to expand...
Click to collapse
I'm on 4.4.2.I figured it is my kernel. After sending this message last night I had my phone in download mode but didn't do anything to it. I decided to turn it off and then on again and it booted. So if this is a kernel issue where would I find one and how would I do this? Oh and when the bootloop occurred last night I was trying to boot into recovery via too manager. If I put Twrp on my phone when I have CWM will they interfere? I apologize for the likely stupid questions but I'm just wanting to get it done properly. One last thing is PacMan ROM compatible?
helterkelter said:
I'm on 4.4.2.I figured it is my kernel. After sending this message last night I had my phone in download mode but didn't do anything to it. I decided to turn it off and then on again and it booted. So if this is a kernel issue where would I find one and how would I do this? Oh and when the bootloop occurred last night I was trying to boot into recovery via too manager. If I put Twrp on my phone when I have CWM will they interfere? I apologize for the likely stupid questions but I'm just wanting to get it done properly. One last thing is PacMan ROM compatible?
Click to expand...
Click to collapse
The kernels you can use are listed in the general thread. A user posted a very good listing of what's what. TWRP 2.7 or Philz Touch are the 2 recoveries i would recommend using. Whichever one you decide will overwrite the other. you can never have 2 recoveries.
OK I'm sorry but I'm a little confused. One solution mentioned was to flash 4.4.2 stock using Odin. But you said not to use it unless I've bricked my phone. So now I'm lost. Lol. Do I flash the stock with the above mentioned method? Or do I flash a kernel and then a ROM? I apologize for my inexperienced questions. I'm including my device info below in hopes you can tell me the very first step I should take. Thank you for all your help!!!
Baseband N900TUVUCNB4
KERNEL- 3.4.0-660648 [email protected]#1
BUILD #- KOT49H.N900TUVUCNB4
SE FOR ANDROID STATUS- ENFORCING SEPF_SM-N900T_4.4.2-0005
SECURITY SOFTWARE VERSION- MOF v1. Release 2
Sent from my SM-N900T using xda app-developers app
helterkelter said:
OK I'm sorry but I'm a little confused. One solution mentioned was to flash 4.4.2 stock using Odin. But you said not to use it unless I've bricked my phone. So now I'm lost. Lol. Do I flash the stock with the above mentioned method? Or do I flash a kernel and then a ROM? I apologize for my inexperienced questions. I'm including my device info below in hopes you can tell me the very first step I should take. Thank you for all your help!!!
Baseband N900TUVUCNB4
KERNEL- 3.4.0-660648 [email protected]#1
BUILD #- KOT49H.N900TUVUCNB4
SE FOR ANDROID STATUS- ENFORCING SEPF_SM-N900T_4.4.2-0005
SECURITY SOFTWARE VERSION- MOF v1. Release 2
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
You are already on the 4.4 bootloader so you can no longer use the Darthstalker rom, you can only use Kit Kat 4.4.2 and above roms from here on out. Next question would be have your rooted your phone since the update and have a custom recovery. If you have not rooted, then you will need to use Odin to run the CF_Autoroot, but that will trip your Knox to 0x1. Thus voiding your warranty.
Yes I rooted. But every time I try flashing CWM or Twrp it bootloops. And to get out of bootloop I have to boot in download and then cancel download and it reboots normal again. Is this a kernel or boot loader issue?
Sent from my SM-N900T using xda app-developers app
helterkelter said:
Yes I rooted. But every time I try flashing CWM or Twrp it bootloops. And to get out of bootloop I have to boot in download and then cancel download and it reboots normal again. Is this a kernel or boot loader issue?
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
Which cwm and twrp are you trying to flash. The only 2 that will work on Kit Kat are PHilz touch latest one, and TWRP 2.7
Twrp 5.7.3
Sent from my SM-N900T using xda app-developers app
So do I flash stock as mentioned from another member or do I flash a kernel? I'm not sure what to do next
Sent from my SM-N900T using xda app-developers app
helterkelter said:
So do I flash stock as mentioned from another member or do I flash a kernel? I'm not sure what to do next
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
oh sorry for the late response. Just got back from boy scouts. Anyway. No you don't need to flash back to stock, Your just flashing the wrong version of TWRP. You can go to the android originial development thread and download the TWRP 2.7 and flash via recovery and you will be all good to go. Also, download the latest Wootever kernel just to make sure you have both angles covered. Both downloads are found in the same section.
Ok thanks so much. Im a little scared to flash in TWRP as it always puts me in bootloops. I did download philz and I was considering flashing that via Odin as I can't boot into recovery. Would that be the next best thing to do? Oh and dont apologize!! I can't thank you enough!
Sent from my SM-N900T using xda app-developers app
helterkelter said:
Ok thanks so much. Im a little scared to flash in TWRP as it always puts me in bootloops. I did download philz and I was considering flashing that via Odin as I can't boot into recovery. Would that be the next best thing to do? Oh and dont apologize!! I can't thank you enough!
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
Yes, odin the custom recovery and you should have no more issues. As for the bootloops with TWRP, you only had issues with that, because the version you were trying to use was outdated and does not work on Kit Kat
Hmm found an interesting possible solution and would greatly appreciate your guidance. I found a ROM that supports KK and I think in this thread that it may indicate why I bootloop when trying to bootbin recovery. http://www.infamousdevelopment.com/...-recover-from-a-bad-flash-updated-for-kitkat/
I'm seriously considering following this whole tutorial of his to the letter. Would it be wise to do?
Sent from my SM-N900T using xda app-developers app
helterkelter said:
Hmm found an interesting possible solution and would greatly appreciate your guidance. I found a ROM that supports KK and I think in this thread that it may indicate why I bootloop when trying to bootbin recovery. http://www.infamousdevelopment.com/...-recover-from-a-bad-flash-updated-for-kitkat/
I'm seriously considering following this whole tutorial of his to the letter. Would it be wise to do?
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
You have already upgraded to Kit Kat, that part is done. and you ran CF_Autoroot correct in Odin correct? If you have done both steps all that is left is to Odin the Philz Touch Recovery that you downloaded.
Ok and yes I did both the first two steps you asked above. After I do flash philz can I flash a ROM it CM or PacMan as long ad they're 4.4.2?
Sent from my SM-N900T using xda app-developers app
helterkelter said:
Ok and yes I did both the first two steps you asked above. After I do flash philz can I flash a ROM it CM or PacMan as long ad they're 4.4.2?
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
As long as they are AOSP Roms that support both bootloaders yes, and as i've been told most if not all the AOSP Roms do support the Kit Kat bootloader that you are already on.
Ok thank you again. I will likely flash philz tonight (if hubby allows me to cuz I usually stay up all night til I got my phone the way I want it, ie no boot loops lol) I will report back to let you know if it works. This phone has been through hell and back with me but I've learned a lot!! Especially from contributors such as yourself. :thumbup:
Sent from my SM-N900T using xda app-developers app
Cool. I'm glad I read this thread. I too had same problems.
Sent from my NOTE 3 using Tapatalk