[Q] Screwed up (red triangle) - Desire HD Q&A, Help & Troubleshooting

Looks like tiredness has got the better of me and I screwed up my bootloader (I think).
I purchased a pre-rooted DHD, it was rooted through Advance Ace Hack Kit. I have 4ext installed as the recovery and have Ice cold sandwich flashed. I do have a nandroid backup of the rom.
Unfortunately I was running Advance Ace Hack Kit just to see what the options were as I was looking for installing an eng bootloader, unfortunately I selected option 1 by mistake and the software started running, phone rebooted a few times and now it's just stuck at the splash screen. I was in two minds to stop it mid-process but thought that might make things worse.
I also cannot access my 4ext recover, instead I get the red triangle and the htc recovery.
Damn, I'm annoyed with myself. I am tired and got momentarily distracted. I know one thing, if this can be fixed I won't be doing this again:crying:
Can this be brought back to life?

Ok, I have got myself out of this predicament by installing the stock wwe rom. Thankfully the phone rebooted, started up and the phone is back in business.
Of course I am still s-off, however I assume I am now unrooted.
Is there an easy option to root the device bearing in mind the phone is s-off? I want to root and flash cwm or 4ext.
Thanks.

Wht version of the Rom did u flash
Sent from my HTC Desire HD using xda app-developers app

maritimesbob said:
Ok, I have got myself out of this predicament by installing the stock wwe rom. Thankfully the phone rebooted, started up and the phone is back in business.
Of course I am still s-off, however I assume I am now unrooted.
Is there an easy option to root the device bearing in mind the phone is s-off? I want to root and flash cwm or 4ext.
Thanks.
Click to expand...
Click to collapse
In the "Ace Think Tank" thread (linked in my signature), post #7, there is a PDF that includes instructions on flashing a custom recovery from an S-OFF phone. Start from the bottom of page 9, the section labeled "S-OFF no custom recovery." After that, just flash a rooted ROM from the recovery.
Or, assuming you have a working ROM, you could look into SuperOneClick. I think it roots a ROM if the phone is S-OFF (however, I have never used it and can't speak to its reliability). Then you can just flash a recovery from an app like ROM Manager or 4ext Updater.
Finally, again assuming you have a working ROM, you could try flashing SuperSU from the zip here. Again, untested, but it has restored root on at least one occasion that I know of to an unrooted ROM.
Please note that I'm just throwing ideas around. If anyone knows that any of these methods doesn't work please say so.

Hello all,
Thanks for the replies.
I have the phone working, I installed the wwe htc sense rom that comes with 2.3.5 and sense 3.0. Pretty much my phone is factory reset, but at least it works now.
I lost root but do have s-off.

Use superoneclick. 2.3.3 it can easy root stock sense 3.0 when you are S-OFF which you are already.
1.First press temp root and wait for it to finish.
2.second root and wait for it to finish.
3.enjoy.

Got it sorted. I flashed a cwm recovery zip from an sdcard in bootloader. With cwm flashed, I could restore a nandroid backup. Back in business again.

If you want to unbrick your phone, you need to download an official RRU, or RUU or whatever it is that it is called. It is an EXE file that you download on your computer and run it. You can get it from HTC website, or google it. It's a stock setup of your phone. So you put the phone in red triangle mode, connect it to PC, and run the RRU file. It starts its magic and the phone will be back to stock with the sense and GB and everything. Use the Ace Hack Kit again to get it rooted and S-OFF if it isnt already and then install RoM as you want to.

Related

[WARNING] If you have s-off do NOT flash offical pc10img.zip

Ok mods, I know this normally isn't the place, but I think this is very important as I'm seeing more and more semi bricks, some of which are not recoverable without HTC signing keys!
So I ask you mods, please don't lock this, if anything it really needs to be a sticky!
That being said, if you are s-off, do NOT flash the signed offical PC10IMG.zip. if you don't have the correct rom on there when you do, as per the unroot thread you will get stuck.
Let me give u an example of what I've been seeing and why its happening so everyone understands. Example: you perm root/s-off your phone. You decide to do some rom playing. You end up boot looping and can't fully boot into android. So u say hey, ill reload pc10 and start over, WRONG.
What happens is s-off does no checks, sigs, version number etc. So when you load it up it starts to flash. Hboot(s-on) is first, then recovery, then radio. Thing is it has to reboot to do radio, so it reboots, at this point your s-on so it does a version check. "Main is older" then it quits before ever touching the system.img or boot.img. at this point you are locked. You have s-on, stock recovery, and can't boot android. Long story short, your screwed.
Now depending on the rom/kernel u had/have installed you may have adb access. At this point you have a small chance of recovering, which is better then some. I just spent the last 5 hours working with someone on a fix and think we got it, but the bat has died and will have to pick back up tomo. If this works or not, I also have one more idea we can try. I will update OP with any fixes we find.
*If your system was bootable when you started this, it may still boot. but you will be s-on, stock recovery, and still on whatever rom you were running. at this point you will have to hex edit to downgrade, or wpthis.ko if there is one for your kernel to get back to s-off.
*ive seen some people saying. i did it, it worked for me, but don't add any supporting info. this is bad for people new to android cause it makes them feel they will be ok. the only way this can work is if you have a version installed as old or older then the official img, or if you take hboot out of the update which then makes it no longer the official update. but my question is why are you flashing this? if you want to fully unroot, then follow the unroot guide. if you just want to go back to stock w/root, grab one of the stock w/root roms.
Long story short, do your rom flashing from recovery. Stay out of hboot unless you are following proven instructions to a T, or being walked though be a "pro". I hope this helps save some people!
* if you just read all this going DAMN, i already did that, then go here:
http://forum.xda-developers.com/showthread.php?t=842495
Sticky this. In big bolt capital letters. I've seen this happen once already, and just saved another phone from this headache.
More people need to know about the DON'T-FLASH-PC10IMG.ZIP
dyndragon said:
Sticky this. In big bolt capital letters. I've seen this happen once already, and just saved another phone from this headache.
More people need to know about the DON'T-FLASH-PC10IMG.ZIP
Click to expand...
Click to collapse
When u say u saved a phone. Do u mean u stopped someone before they did it, or you mean u have a working fix. Pls post fix if u have one. I will post mine as soon as I confirm it.
Btw- I have seen 5 happen in the last 3 days. As I haven't gave up on any yet, some are worse off then others and only 2 have a possible fix in the am, well a fix I know of.
After I permarooted, I decide to flash a Z ROM. I did, and I didn't care for Sense, so I flashed PC10 and didn't have any issues. Mind you, I didn't flash the OTA at that point either. Phone booted up without an issue, I got the OTA almost immediately, and I permarooted again.
Basically, if you applied the OTA, don't flash PC10 to get stock again.
So does that mean the instructions for how to Un-Root are no good?
KronicAnarchy said:
So does that mean the instructions for how to Un-Root are no good?
Click to expand...
Click to collapse
I unrooted my phone, no problems.
No the instructions to unroot are correct because at the beginning you flash an alternate misc.img to change the main version number. I got stuck the other day because my phone wouldnt boot and i couldn't flash the ota because i had removed google goggles and some other system apps so i tried to downgrade using PC10IMG.zip and it cancelled during installation just as stated in the op and i was somehow able to flash the misc.img through fastboot and reflash with PC10IMG.zip
sethrd said:
After I permarooted, I decide to flash a Z ROM. I did, and I didn't care for Sense, so I flashed PC10 and didn't have any issues. Mind you, I didn't flash the OTA at that point either. Phone booted up without an issue, I got the OTA almost immediately, and I permarooted again.
Basically, if you applied the OTA, don't flash PC10 to get stock again.
Click to expand...
Click to collapse
If you did not flash the stock rom before you flashed the pc10, you got lucky. When it reboots half way though, it does a version check, and the rom version you happened to be running must have been an older base. If your phone is bootable and you flash the pc10 OUT OF ORDER it will lock you down that way, ie locked on sense. If anyone wants to go back to stock, just flash one of the stock w/root roms in recovery or via rom manager... trust me on this, there are more people screwing up there phone because of this then anything, just not posting about it. I've been up all hours of the night, helping differnt people the last few days.
KronicAnarchy said:
So does that mean the instructions for how to Un-Root are no good?
Click to expand...
Click to collapse
No the unroot guide is ok. If you notice, the first thing it has you flash is the stock w/root rom. Like I said if you follow proven instructions to a T, you will be ok. That is if you want to go back to non-root only though. If you just want stock with root, flash a stock with root rom via RECOVERY or ROM MANAGER.
Im not to sure how it all works and i just got up a little bit ago .
but since s-off doesnt check the sign couldnt we unpack and repack pc10img with the hboot with s-off?
fastludeh22 said:
Like I said if you follow proven instructions to a T, you will be ok.
Click to expand...
Click to collapse
Well he's edited his post now, and people have followed his instuctions and bricked their phones.
So just to confirm before I brick mine: The instructions in their current form will not brick my phone, right?
I had s-off when running baconbits. I tried to revert back to stock but couldn't. I then flashed pauls prerooted phone rom and tried to install the stock rom back onto the phone. I seems to have removed the s-off and now displays s-on. I am permanently rooted, but fastboot still shows s-on. Was this caused because I tried to flash the pc10img.zip? Now how do i revert back to stock? I don't have a nandroid backup for the stock rom, just paul's which after a recovery still displays s-on. It doesn't loop, I just can't install anything else on there.
I flashed pc10 and it turned S-ON. But when I booted it up I still had root acess, so it was like a temp root but where I could not write to the system. I took the ko file from the perm root and hex edited it to match the kernal on my phone.. boom rooted again and I was able to flash recovery and do a nand restore
I tested it out again by hbooting pc10.. and I was able to obtain s-off by changing the kernal number in the ko file
Sent from my T-Mobile G2 using XDA App
So let me get this straight, in order to flash pc10 safely we MUST have an existing PreRooted STOCK ROM?
No all you have to do is run hexeditor to change build number then you can flash pc10img
Sent from my T-Mobile G2 using Tapatalk
marc91988 said:
No all you have to do is run hexeditor to change build number then you can flash pc10img
Sent from my T-Mobile G2 using Tapatalk
Click to expand...
Click to collapse
Exactly. If you actually follow the directions in the thread you will be fine. I've done it more than a few times and have not had any problems yet.
I have also updated the instruction on the unroot guide aswell.
I was running the original Sense rom that was loaded via hboot which kept me at s-off. I was able to revert back to stock using the PC10 zip from here http://forum.xda-developers.com/showthread.php?t=831398 At the time I had no clockwork recovery. Was what I unsafe?
Thanks for the piece of mind. I don't want to unroot just yet, I'm running pretty much the stock rom w/ ota and bacon bits anyway, so........ Still it's nice to know that I can get back to stock should I NEED to.
Okay so I did this and I didn't brick my phone...and still have root/s-off
Did an ota update, after I found out there was perm root I perm root g2 s-off, then I went and downloaded clockwork/rom manager
Created a backup of the current g2, and did a wipe
Then hboot to sense ui (still have root). I went into clockwork create another backup. Played around with desire z rom.
After I decided to go back to stock 2.2 performed a restore with clockwork and now I am back to my original g2 stock.
So am I missing something here?
fryrice8850 said:
Okay so I did this and I didn't brick my phone...and still have root/s-off
Did an ota update, after I found out there was perm root I perm root g2 s-off, then I went and downloaded clockwork/rom manager
Created a backup of the current g2, and did a wipe
Then hboot to sense ui (still have root). I went into clockwork create another backup. Played around with desire z rom.
After I decided to go back to stock 2.2 performed a restore with clockwork and now I am back to my original g2 stock.
So am I missing something here?
Click to expand...
Click to collapse
These people didnt nand back before messing around with stuff
Sent from my T-Mobile G2 using XDA App

[Q] cant flash clockworkmod but phone is rooted please help

I really need help or direction to where I can get help please. I have been trying root my phone. I followed the guide on here for the Windows method and the Linux method when that was unsuccessful. The phone seems to have been rooted as I have the superuser permissions app (the ninja) and titanium backup worked once I went to the problems section and added busybox. Various other root only apps work. The app root check says I'm rooted but that I don't have busybox installed even though titanium backup says I have it.
My problem is unrevoked will not flash clockworkmod recovery. It says is firmware too new. I am on Telstra branded desire gsm on 2.1 exactly as I got it. Hboot is .75 software version 1.16 I did a factory reset and unrevoked said failed to flash recovery the first time then the next few times the usual is the firmware too new. I tried flashing the recovery using ROM manager but even that doesn’t work. I don’t know what else to do. Any advice????
I have not tried the manual method of installing clockworkmod the way it is explained on the cyanogenmod guide as I don't understand it.
I just don't what else to do. Please help me. Thank you.
hi maniacal26,
it's always better asking before than after having bricked the phone.
so now you are root, i think this is still stock rom. So it's normal that U are not busybox installed into the phone (titanium uses his own titanium... just stick fix the problem into the app titanium to get ONLT to allow titanium working fine)
You can install busybox by the market busybox
about root => get the app root checker it will tells you if U are well rooted
don't use rom manager as it a waste of time... i would advice you to use the recovery amon_RA v2.0.1 work great even to partition your sd card.
first of all you mus be sure that is a unbranded phone or branded phone
branded phone need a goldcard (look into the forum there s a lot of thread about it)
if unbranded u can use unrevoked 3.21 and select in the menu bar a presonnalized recovery which has been previuosly downloaded to your computer.
follow this TUT for branded phone as it seems you ve got one (telsra)
be caution and ask before if any doubt... ask question to this community.
there plainty members who knows a lot of stuff about android.
I have downloaded root check and it confirms I am rooted.
Busybox will not install using that app it says my nand is locked.
Titanium backup works and has installed its own busybox 1.16 even though the busybox app says there is no busybox installed and that it can't install one.
Where can I find unrevoked 3.21 I can only find 3.32 ?
I will make a goldcard now and try again.
Thank you.
maniacal26 said:
I have downloaded root check and it confirms I am rooted.
Busybox will not install using that app it says my nand is locked.
Titanium backup works and has installed its own busybox 1.16 even though the busybox app says there is no busybox installed and that it can't install one.
Where can I find unrevoked 3.21 I can only find 3.32 ?
I will make a goldcard now and try again.
Thank you.
Click to expand...
Click to collapse
Is phone really new ??
Then may be your phone is PVT4 ...
Try using Amon RA Recovery
http://forum.xda-developers.com/showthread.php?t=839621
Also search unrevoked on xda, its very easy to use, and if your phone is pvt4, you'll also have to use AlphaRev for S-OFF ....
http://forum.xda-developers.com/showthread.php?t=794314
Hope it helps
I bought the phone brand new from Telstra in Australia and never did any of their updates it is stock.
I have tried the unrevoked method that is what has given me superuser permissions it just won't flash a recovery. I have been told to use 3.21 version but I can only find 3.32 so I can't go any further with that st this point. I made unrevoked flash the anon-ra recovery but it just keeps saying is fails to flash is it firmware too new. It can't be too knew as its what the phone shipped with when I bought it in June last year.
Thank you for it suggestions. I do not have pvt4 the bootloader does not say that.
Thank-you again. I will try what u suggested and report back.
maniacal26 said:
I bought the phone brand new from Telstra in Australia and never did any of their updates it is stock.
I have tried the unrevoked method that is what has given me superuser permissions it just won't flash a recovery. I have been told to use 3.21 version but I can only find 3.32 so I can't go any further with that st this point. I made unrevoked flash the anon-ra recovery but it just keeps saying is fails to flash is it firmware too new. It can't be too knew as its what the phone shipped with when I bought it in June last year.
Thank you for it suggestions. I do not have pvt4 the bootloader does not say that.
Thank-you again. I will try what u suggested and report back.
Click to expand...
Click to collapse
Use the RUU to go back to stock and try again
Sent from my HTC Desire using XDA Premium App
EddyOS said:
Use the RUU to go back to stock and try again
Sent from my HTC Desire using XDA Premium App
Click to expand...
Click to collapse
i downloaded the telstra one from here http://forum.xda-developers.com/showthread.php?t=695667 the one i chose is http://shipped-roms.com/shipped/Bra...4_R4_Radio_32.30.00.28U_4.05.00.11_123851.exe
when i attempted to run it said i had the my usb cable is not connected first then upon rerunning it, it said that my ruu image is the incorrect one. my phone is a telstra branded phone i bought on a contract from telstra itself. it has to be the right one.... ????
thank you for ur suggestion. do you have any other advice?
hi maniacal26,
about the new... quite annoying since my phone bought from jan2011 is pvt4
i use unrevoked 3.21 you can donwload it by clik the name from my dropbox
the following link is amon_ra v2.0.1
from now, i use unrevoked to root and instal a recovery (wich would be cmd 2.5.3 (you can select file and choose another recovery like amon ra)
as my desire is unbranded I've never used a goldcard. so I could say more that is saying in the xda's tutorial.
from my own, i used unrevoked to root and instal a recovery - made a nand backup follow up by the alpharev 1.8 s-off.
once done i used fasboot methode to flash the recovery
Code:
fastboot erase recovery
fastboot flash recovery c:\adb\amon_rav2.0.1
i bcp up all sd card on computer followd by partionning sd card with fat32 + ext3
from there i choose a custom rom (from my own - leedroid - which is the more stable and complete) that's all
since every thing work fine
(i advice to run alpharev on usb bootloader)
hope this would help
I'll put a shot in the dark here.
Download the CM7 for the phone.
If you're running ROM manager, Flash to the newest clockwork recovery first.
Boot into loader,
Wipe all data and cache memories, including Devalc
Then flash
Thank-you to everyone who tried to help me. I gave up for while and tried again. I installed amon-ra I just could not get clockworkmod to install to the phone kept saying I had too new firmware. When I tried to restore back using the original firmware off the HTC website it also said my firmware was too new and that I had to use one of the newer roms they had to offer.
I used unrevoked but chose amon-ra as alternative recovery. Worked instantly. Everything has gone smoothly since then. I am running cm7 with recommended radio. I just need to s-off to get more internal memory available.
If anyone has problems like this just amon-ra, it even worked using win 7 64-bit whereas the other way it wouldn't even work using ubunto.
As a side note I have noticed a massive slow down (compared to the fresh cm7 install speed) on the phone once there is too many apps installed. It seems to be more about number rather than size. Regardless of how many, if any at all, apps have been moved to the SD card. I found there was a Tom that said it fixed this but I'm just gonna stick with cm7 anyway. Ill just run less apps and for an update.
Also been running phone on 1113Mhz now and its not a problem in my use with overheating in case anyone was a little afraid to test out.
Thanks to everyone again and I hope this post can assist someone else who is ready to break the phone.
Sent from my HTC Desire using XDA App

(q) DHD OTA update 2.2 to 2.3

Hello there, I have DHD 2.2 stock HTC in with root. My phone is radio s-off and installed custom recovery.
Today I recived OTA update 2.3, I was told that having root phone prevent OTA update. However, I have it now and I don't know if I have to update or not.
Will I lose the root, s-off and custom recovery if I update?
Will I be able to root again and install custom recovery?
Having root prevents you from actually installing the Ota's. Since your stock rooted the phone will still notify you of updates(unless the Dev desables it). So if you would try to install it it would t work and most likely you'll get stuck screen with the exclamation point I believe.
If you want to update you will need to ruu up to 2.3, then you can reroot with gingerbreak. This method will erase everything so make sure to backup
Here's the link to the 2.3 ruu that you run from your computer. Thanks goes to andyharney for the link.
http://www.iloveabath.co.uk/index.php?dir=RUUs/
Sent from my TARDIS using XDA App
Thanx for explanation, but I believes using RUU will return the phone s-on and remove the custom recovery. Is this correct?
The ruu will keep you s-off. It will delete the recovery but after you root using gingerbreak, you can reinstall it through rom manager
Sent from my TARDIS using XDA App
Hi! I might jump into this thread because I have exactly the same situation (except I am not running a custom recovery) but I have a big issue.
The micro usb port on my DHD does not work anymore. I've put off getting it repaired as I have 4 spare batteries and 2 chargers, so I've been able to get by.
Can I still RUU, then Gingerbreak without using the micro usb port?
Cheers!
One other thing - I have the Australian DHD - I did not see a listing for an Australian RUU - Would I need to go find one or could I potentially use a WWE?
What about un-root my 2.2 using visonary then install 2.3 with OTA after that root it with gengerbrake? Is this good plan? Will this remove recovery and s-off?
@RaindancerAU:
Well, RUU needs the USB port. You could try copying a .zip file to the root of your sdcard, then go into Bootloader and update it through there.
(You can get the .zip file from the RUU by opening the RUU.exe file and press 'Next' untill you reach the 'Checking device' - or something like that - part. Then just press - 'Windows key + r' - type %temp% and search the folders for a .zip file called ROM.)
As for you other question. If your phone is branded to a specific carrier, then using the carrier-specific RUU is recommended. If your phone isnt branded, ... , WWE is fine!
What about un-root my 2.2 using visonary then install 2.3 with OTA after that root it with gengerbrake? Is this good plan? Will this remove recovery and s-off?
Click to expand...
Click to collapse
Gingerbreak requires S-OFF. By OTA'ing' S-OFF will still remain, but recovery will be replaced with the originnal HTC recovery.
So if you had S-OFF before updating, then Gingerbreak will work, hopefully
CodeNameUnknown1 said:
Gingerbreak requires S-OFF. By OTA'ing' S-OFF will still remain, but recovery will be replaced with the originnal HTC recovery.
So if you had S-OFF before updating, then Gingerbreak will work, hopefully
Click to expand...
Click to collapse
Thx, I will give a try...
Sent from my Desire HD using Tapatalk
I have a similar scenario.
my phone came with 2.2 and I used the advanced ace hack kit and it successfully rooted, s-off'ed and have the ace hack kit recovery.
When I checked for updates, I was surprised it did prompt me for the OTA 2.3 update.
I am tempted to install it but I am not sure if it will unroot my phone and remove the recovery and if it does, then how do I get it rooted again and have rom manager recovery?
I am with Three Australia and I was hoping someone else had done this before and would like to share their experience with us.
Since your rooted the Ota's will fail to Install. If you want to stay stock I would just flash a prerooted version.
Personally though you should give custom roms a try and enter the fun
I have used an Ice Cold Sandwich custom rom and I loved it on my old DHD but this new one which I got as a replacement came with Froyo and for some odd reason, the WiFi is not working correctly. It connects but nothing get sent or received. I'm not quite sure if its the aahk that caused or it was an issue since I got it as I don't recall using WiFi on it before running aahk on it.
So I was hoping I could install this ota and check if it gets fixed, otherwise I will take it back to 3 so they can have a look and it would look like I have done nothing to it.
Hope this makes sense.
I'm really worried about applying this ota. I have taken a backup but would I get the chance to restore it if the ota update fail to install as you are saying?
Sent from my Desire HD using XDA App
You could restore, but the Ota's wont install at all. You'll get stuck on the screen with an exclamation point,and you'll need to pull the battery to reboot the phone.
What you could do is flash an ruu/pd98img of the stock rom to check the wifi issue. This way will get rid of root and cwr but its easily reattainable
I would not lose anything if I attempt it and fail? Just pull the battery out and I am back in business?
I will update to the latest ruu (Hutch AUS 3.12.861.2 PD9810000) from htc dev page but this will unroot the phone and remove cwr and put htc recovery. And then you want me to run the OTA update?
Just curious how easy it will be to root it and install cwr after I apply the ruu above.
Saturn007 said:
I would not lose anything if I attempt it and fail? Just pull the battery out and I am back in business?
I will update to the latest ruu (Hutch AUS 3.12.861.2 PD9810000) from htc dev page but this will unroot the phone and remove cwr and put htc recovery. And then you want me to run the OTA update?
Just curious how easy it will be to root it and install cwr after I apply the ruu above.
Click to expand...
Click to collapse
First two questions correct. But their is really no point in attempting it unless out pure curiosity to see if fail.
If you flash the ruu, no need to apply the Ota's as the ruu is probably The Ota's its asking you to install.
Because you will still be soff even after the ruu, you could just install cwr via a pd98img. Then install a rom or backup. And even if you were son the hack kit would still be able to root your phone
I was as curious as a cat and you were spot on. It did fail.
The RUU I was referring to was from the htcdev page which is only 5.9MB and it's mainly to update hboot.
What I ended up doing last night was to apply this http://forum.xda-developers.com/showthread.php?t=843998 and the OTA still failed.
I guess it failed and when I checked, I still had cwr and hence why it failed.
I checked to see if I still had root and it was not. I was able to install superuser and this was all I needed to get root again. I did not think it was this easy.
I then ended up applying IceColdSandwich 4.0.0 from http://forum.xda-developers.com/showthread.php?t=1450962
I am going tonight to apply 4.1.1 which only got released today.
I have a question about pd98img. what things can I install using this method? Can I packages apk files and name the file this and it will auto install when I hboot?
Pd98imgs are used to flash a radio, a recovery, and a bootsplash(image before you see the bootanimation)
You can have zips that install apps for you. Those are flashed in recovery. I know icecoldsandwich has a overlay script to do that aswell when flashing that rom. You would just have to place your apks in the specified folder.(I believe its data/app/apks)

S-off with currently rooted and cm7

Hi all firstly I just wanna say thanks so everyone that develops and creates amazing stuff for our phones on this site. Right to on to my question, I got my HTC desire a couple months ago, rooted it basically as I got it, with unrevoked, however, I'm still busy considering going s-off and I have a big question, I currently am running cm7 nightly, and clockworkmod 2.5.0.7, which got flashed during the unrevoked process, so my question is, is it safe to s-off with this? Or should I run an ruu first, and if it is safe, should I let alpharev install its custom recovery or not?
I did look around the forums, and couldn't find anything directly related to this, so any help is greatly appreciated
Thanks so much
Not sent from an IPhone of any sort
I had such a mission trying to S-OFF - eventually, after asking around, I realized that the most common problems when trying to S-OFF come from two things:
A) S-OFF when a Gingerbread ROM is installed.
B) S-OFF in a rom that uses Apps2SD or Data2SD.
Eventually, I just downloaded a 2.2 RRU that had Root and S-OFF'd from that. Worked like an absolute charm. Don't worry, once you're S-OFF you can then flash a Gingerbread, Apps2SD ROM - but prior to this, rather use a stock, 2.2 rooted ROM. Unfortunately I can't remember where I downloaded it from, but it was from XDA. The filename was Bravo_WWE_2.29.405.5_v5.zip
Don't forget to familiarize yourself with Android SDK and Fastboot. Cyanogen have a fantastic Wiki on it: *can't get the full link, Internet is being lame. http://wiki.cyanogenmod.com/ and search for Fastboot.*
edit: Found the link in my Download History - http://www.multiupload.com/SAEPLNMOG7
ok thanks, quick thing, RUU's erase your current recovery right?
and with that, did you let alpharev install its custom recovery?
Thanks so much
Uhm, good question. I never really had the opportunity to tell. I told AlphaRev to install CWM-AlphaRev recovery, and there's no where between starting the S-OFF process and it being done and dusted to tell if the recovery layer is removed.
To elaborate:
ClockWorkMod, flash RRU.
Boot into RRU, start S-OFF.
S-OFF completes, CWM-AlphaRev is installed as recovery.
No where to tell if ClockWorkMod was removed
Ok so you just flashed your stock Rom from recovery and went from there? You didn't go through the whole pc ruu/fastboot process? Sorry for all the questions
Not sent from an IPhone of any sort
Yup - ClockWorkMod, Full Wipe, install ZIP from SDCard, Bravo_WWE_2.29.405.5_v5.zip, Reboot phone in ROM, enable USB debugging, start the S-OFF Process.
I did need to use fastboot to flash AplhaRev Oxygen once S-OFF, as that's the partition sizes I wanted.
Ok thanks so much
Not sent from an IPhone of any sort

[Q] Hopelessly Stuck in 2.1 With Evo 4G

I am stuck in Stock "Firmware Version 2.1-update 1" with Software Number 1.47.651.1 and even though I constantly check for OTA updates, the phone says that there are no updates for my phone.
Here is how I got here: I got my Evo 4G a few days after it came out. I was an early adopter of Unrevoked and Unrevoked Forever (S-Off). Things were great. Eventually, an OTA slipped by and forced my phone into a boot loop. I was able to use Clockwork to restore one of my backups and then avoid further OTA's.
I decided that I wanted to go stock, and get to the newest OTA. I used the RUU method to get my phone back to its stock rom. Then, the phone found two OTA updates. I thought that it probably had to update in several steps instead of jumping right to the latest update, so I just accepted the first two OTA's that it found. Unfortunately, the phone will not find any more updates and I am stuck with 2.1 (1.47.651.1).
I also noticed that when I boot into recovery, there is no "recovery" there. I see the word recovery, but when I select recovery it takes me to a red triangle with an exclamation point in the middle. I tried to download and install the 2.3.3 OTA Rom by renaming it to update.zip and putting it on my sd card, but I got some errors and it would not install.
I wonder if having S-Off has anything to do with the phone refusing to find the newest OTA updates? Or maybe I need a new radio? But if I reverted all the weay back to stock, wouldn't all of this been taken care of during the RUU method?
If anyone can help me get to the newest official version of Android, I would really appreciate it.
Thanks very much!
You need to install a recovery, I suggest amon-ra, then download a rom and flash it through recovery. Sounds like you just don't have a recovery installed
We're comin from a pure power source.
But am I unrooted now that I went back to stock with the RUU? If so, can I flash a recovery?
Thanks!
once u get to the little evo with the exclamation point, hit volume up and power at the same time. It takes u to a stock recovery. Or just flash a custom recovery as said above as a PC36IMG.zip flash a custom rom and viola! Or the other method u can do is take it to a sprint store and have THEM run the stock 2.2 RUU, get you to 2.3.3 and you should be able to update to the OFFICIAL AOS but of course as with anything stock, you run the risk of losing full root. But I doubt it because I just rooted a stock evo with the latest 4.54 OTA update just fine. hope this helps. Good luck with any way you choose to go.
Whether you are s-off or s-on doesn't matter to run the latest 4. 54 ruu. Download it and run it. U will then have latest software. Then if ur not s-off go to revolutionary.io and get s-off'ed
Sent From My Pocket
{ParanoiA} said:
Whether you are s-off or s-on doesn't matter to run the latest 4. 54 ruu. Download it and run it. U will then have latest software. Then if ur not s-off go to revolutionary.io and get s-off'ed
Sent From My Pocket
Click to expand...
Click to collapse
I will agree with this person. Sounds easier than my post lol google-foo will prove to be a useful tool young grasshoppa -_- (goooong) no racial slur intended ppl

Categories

Resources