Related
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Which recovery version are you using? It might a corrupted recovery.
Try this recovery TWRP is cwm flashable:
SGH-T989_TWRP_v2.2.2.0.zip - 6.72 MB
Then TDJs super wipe and then install the stock ROM or any other ROM.
http://forum.xda-developers.com/showthread.php?t=1858435
Sent from my SGH-T989 w/AOKP JB Sept-12-12 using XDA app.
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
wwwwd83 said:
SHG-T989 on TMO. I was running CM 9.0 but wanted to update to 9.1. NOW I CANT DO ANYTHING!!! Here is what I did:
1. Downloaded the CM9.1. 2. did a backup through CWM. 3. wiped data through CWM, "wipe data/factory reset. 4. wiped cache partition through CWM. 5. did a Darkside Super Wipe through "install zip from internal sd card" (last time installing CM9 i got stuck in the boot screen and had to go back using Darkside Super Wipe, reinstall CM9 and it worked fine). 6. Reboot to recovery. 7. installed CM9.1 through "install zip from sdcard". 8. installed gapps through "install zip from sdcard". 9. Reboot.
It came up and was stuck in the CM9 boot screen. So I went back in through CWM and tried to "wipe data/factory reset" and it wont work! Tried to go back to stock through Odin and it wont work! When i try to wipe data, the process starts and completes the "formatting /data, then gets stuck at formatting /cache. Does the same thing if I try to wipe the cache.
Im completely stuck and have no phone.
Click to expand...
Click to collapse
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
m tr4nch said:
any updates to this? i'm having basically the exact same problem, formatting cache or anything to do with that partition freezes up on me.
using cwm 5.0.2.7 did a darkside super wipe, flashed on a JB rom (P.A.Cman), flashed gapps (20121011), wiped cache, wiped dalvik cache, rebooted then got stuck on boot animation. rebooted back into cwm to try and wipe again and reinstall, no luck got stuck on formatting cache.
loaded up my nandroid which went fine, ended up installing twrp instead to see if that would help, rebooted into recovery and was stuck on the "teamwin" blue screen and wouldn't go further multiple times. so, put cwm back on (6.0.1.5) to see if the updated version would work. nope, same thing- can't do anything with the cache partition.
any ideas??
luckily my phone still works fine with the backup i made. running aokp ics build 40, streamline #27 kernel, uvle1 radio. been running that setup since july with no real problems, just wanted to try out JB finally and seems now i can't
any help is appreciated! thanks!
edit: will try the above post^ later tonight, just thought i'd see if i could get some more options to try out. thanks.
Click to expand...
Click to collapse
got it all working again.. ended up odin flashing twrp 2.2 and i was able to boot into it, wipe everything, and install the new rom stuff.
Similar problem, but cannot make zips to work - HELP NEEDED
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
thatdude02 said:
Ok, the wipe scripts in CWM recovery v5 are broken! Got experience there because I got stuck on the PACman ROM boot animation.
So, for factory reset, use Darkside Super Wipe. Install zip from sdcard and choose the wipe. From there, install rom, then gapps, and then use the Darkside Cache Wipe. After that reboot and it should work (hopefully)
However the most important thing is that the wipes don't work in CWM recovery v6! It will do bad things!
So yeah, use super wipe to factory reset. Use cache wipe for cache. But follow the instructions to install the ROM.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
HI,
I hope you guys can help me. My T989 got stucked in the splash screen when I tried to update to a nightly CM10 ROM. I entered into Recovery MOde (ClockworkMod 6.0.2.7), then tried to use Darkside Super Wipe... but apparently the phone cannot open zip files. When I hit install zip from sdcard and then select one of the zips (I have tried different ones) it says "---Installing: /sdcard/sgh-t989_darkside.supe.wipe.zip"... but it does not move from there. After 3-4 minutes it reboots by itself and gets back to the splash animation, but never goes beyond that point.
I tried to sideload using ADB, but the phone is not recognized by my PC.
As you said, I think that the recovery mode is corrupted... but I cannot install a new version using a zip
Is there another way to reinstall a version of CWM that allows me to install zips so that I can follow the process you suggested (super wipe + installing ROMS)?
Help will be very much appreciated
Thanks for your time,
Enrique
Click to expand...
Click to collapse
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Use Odin. There is a tutorial on how to revert to stock GB (might be ICS) in the T989 development forum. It should be a sticky in that forum.
Ditto issues.. Thank good for search function. Read.. Read.. Read..
Sent from my SGH-T989 using xda app-developers app
Tried your suggestion, but Odin won't recognize my phone
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
thatdude02 said:
Do NOT use that darkside superwipes with CWM recovery v6.X.X.X. Does bad things.
Use the scripts only for CWM v5.X.X.X.
Anyway, the damage is done and bad things have happened... So maybe check here
http://forum.xda-developers.com/showthread.php?t=1513359
Either that or you can search the forum and Google around and see what you can find. I am in by no means an expert, but depending if you can access the recovery mode or not might be the key here.
I wish you luck, and hope that you don't have a very expensive brick.
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Hi there,
Thank you very much for the answer. I actually spent hours trying to find something before I posted my question. Even before posting I found and tried the method using Odin... but my phone is not recognized by Odin. I followed the instructions but on step 4 I actually do not get any "warning" screen... and then the phone is not recognized.
In the meantime, I can get into recovery, but I cannot install any zips. I have tried to complete a factory reset, but the process gets stuck at "Formating /cache..." and then reboots. When I try to install a zip (any zip, the radio, a new ROM, gapps,... any zip really) it gets stuck too.
Any other ideas? I really appreciate your help.
Click to expand...
Click to collapse
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
samsung jig
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
thatdude02 said:
The only other possible option I can think is to try and install another recovery....
However!
I have no clue how to do it, and in the end you might just end up making the issue worse.... Like hard brick it.
I might think of something later, but I don't know what else I can do for you. I will search around, but no promises...
Best of luck to you
--edit--
Ok try here possibly
http://forum.xda-developers.com/showthread.php?t=1777970
I have seen a few posts saying that they just install this recovery and then restore a backup.
Ok to be honest, try restoring a backup first and see if anything happens there, and then try this thread.
However like before, this may make the problem worse! Proceed with caution and read and understand everything before attempting.
Hope you can get your phone back to functional!
Sent from my SAMSUNG-SGH-T989 using xda premium
Click to expand...
Click to collapse
kikorras said:
Thanks again for the answer. A couple of days ago I tried to install a functional backup that I had from CWM... but it does not work It runs for a long while, then reboots... but it still freezes on the splash screen (my theory is that the backup is not recovered, as I know for sure that the ROM I backed up did work fine)... I think that CWM is corrupted and not working properly.
Then I tried the solution from the thread you mentioned... but adb cannot find the phone when it is connected
I found somewhere that I can use a samsung jig (microUSB with a resistance) to make the phone enter into download mode, then reinstall CWM using ODIN and then try flashing a stable ROM... What do you guys think?
Click to expand...
Click to collapse
I've heard about the jig method as well, but have no idea on how to go about doing it. Might be worth a shot. I don't think the jig costs that much anyway. I will see if I can find anything later.
Sent from my SAMSUNG-SGH-T989 using xda premium
I'm not new to flashing been doing it for going on 5 years. I got an T989 and wanted to put a custom rom on it. I followed instructions to install CWM using ODIN and got my CWM working, I flashed CM10 stable hercules following the instructions exactly (factory wipe, wipe cache, wipe dalvic, flash modem, flash rom, flash gapps, reboot), When it reboots I get the roms splash creen for CM 10 andit stays there forever. I also tried Slim Bean 3.0 and get the same results. I've tried going back to stock ICS and starting over from scratch and each time I get the same result I get to the splash screen and nothing else. I am using CWM 5.0.2.7.
Anyone got any thoughts on what I might be doing wrong I've been reading post after post for about 4 hours now..
jjlwork said:
I'm not new to flashing been doing it for going on 5 years. I got an T989 and wanted to put a custom rom on it. I followed instructions to install CWM using ODIN and got my CWM working, I flashed CM10 stable hercules following the instructions exactly (factory wipe, wipe cache, wipe dalvic, flash modem, flash rom, flash gapps, reboot), When it reboots I get the roms splash creen for CM 10 andit stays there forever. I also tried Slim Bean 3.0 and get the same results. I've tried going back to stock ICS and starting over from scratch and each time I get the same result I get to the splash screen and nothing else. I am using CWM 5.0.2.7.
Anyone got any thoughts on what I might be doing wrong I've been reading post after post for about 4 hours now..
Click to expand...
Click to collapse
When using cwm 5.0.2.7 or below, use the dark side super wipe for all the wiping BEFORE flashing (data, system, cache, etc...)
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Thanks, I actually just found a thread about the "proper way to flash" and seen that 5.0.2.7 was my issue, I upped to 6.0.1.5 we'll see how that goes
So, I used dark side super wipe, then flashed as per how I listed above and still same results . There has got to be something I am missing.
jjlwork said:
So, I used dark side super wipe, then flashed as per how I listed above and still same results . There has got to be something I am missing.
Click to expand...
Click to collapse
I would suggest using TWRP 2.3.1.1 there are no issues with this and you might find better results... just download goomanager app and press menu and select install openrecoveryscript and go through the setup see if you can flash then and good luck with your ROM flashing
NOthing wants to work for me today. When I try to install TWRP it says there are no recoveries for my device....
Try the flash able zip here http://forum.xda-developers.com/showthread.php?t=1768742
And if you do use TWRP you will NOT need the superwipe scripts
This is very messed up, got the flashable zip, everything wen't fine, tried to wipe cash with twrp and device froze until it rebooted by itself. tried installing rom, and now I when I try to go back into twrp it hangs on the splash screen for TWRP. Now I'll have to ODIN back to stock to get back to functioning....something is definately not right here.
You forgot to wipe system. Factory wipe then system wipe...then dalvik and cache wipe. But darkside superwipe should have done that for you.
Sent from my SGH-T989
No, only use the darkside wipes with CWM 5.0.2.7. With 6.0.1.4+, just wipe manually following those steps I posted in that thread. Although you don't need to flash the radio every time. The radio stays no matter how many times you flash.
To make it easier for you..
Go back to stock. Root and install CWM 5.0.2.7.
When you get into recovery flash the darkside super wipe twice and flash the ROM. Then gapps. Reboot and you're good to go. The issue is that you tried using the dark side wipes when they're only meant to be used with TWRP and versions of CWM 5.0.2.7 and lower.
CWM 5.0.2.7 for this phone didn't function correctly so TDJ made those scripts with fixes included specifically for CWM 5.0.2.7.
Point is.. only use TDJs wipes with TWRP (any version) or CWM 5.0.2.7 or lower. With every other recovery just wipe manually as stated in that thread.
Sent from my SAMSUNG-SGH-T989 using xda premium[/QUOTE]
Sent from my SAMSUNG-SGH-T989 using xda premium
here is the issue darkside wipe works fine with 5.0.2.7, but I still get just the splash screen of the rom and no boot. When I use a newer CWM and I am preparing to clear cache the phone freezes and goes into a boot loop, same with TWRP. After using TWRP last night I got screwed and couldn't even get back to recovery. I odined a 5.8.1.3 version of CWM to see if I could back into recovery and I can, but it says E:Can't open /cache/recovery/log and E:Can't open /cache/recovery/last_log.I also can't do anythiing in the recovery as every time i press a button it reloads. I'm just waiting for the stock telus rom to d/l and going to odin back to stock. I'm really lost. I'm starting to think I might have bad nand.....is there an app I can check that with?
Finally, the instruction to use 5.0.2.7 and dark wipe 2 times before installing rom worked Thanks for all the help all!
I also use the darkside cache wipe after flashing the ROM/gapps which properly wipes cache/dalvik on cwm 5.0.2.7.
Sent from my SAMSUNG-SGH-T989
mintharis said:
I also use the darkside cache wipe after flashing the ROM/gapps which properly wipes cache/dalvik on cwm 5.0.2.7.
Sent from my SAMSUNG-SGH-T989
Click to expand...
Click to collapse
NO. Only use the cache wipe if you're having issues. Cache wiping after ROM installation is absolutely unnecessary. Let's not muck things up here.
Sent from my SAMSUNG-SGH-T989 using xda premium
---------- Post added at 03:49 PM ---------- Previous post was at 03:47 PM ----------
jjlwork said:
Finally, the instruction to use 5.0.2.7 and dark wipe 2 times before installing rom worked Thanks for all the help all!
Click to expand...
Click to collapse
You're welcome buddy I myself have reverted to using CWM 5.0.2.7 over any other recovery. Works perfectly when using the Dark side scripts.
Sent from my SAMSUNG-SGH-T989 using xda premium
Was having the same issues as OP. Would install fine and then wouldn't get past the animation.
Got dark side super wipe and cache wipe and worked like a charm first time! Thank goodness
Sent from my SAMSUNG-SGH-T989 using xda premium
Hello,
I have been flashing multiple roms today in hopes of getting something to work. However, it's always the same situation:
1. Followed instructions for flashing.
2. Flash goes well
3. Reboot
4. Stuck on initial splash screen for that room
Am I missing something? Or am i just bricked?
Thanks
Well, first how long did you wait? First boot always takes the longest. If it takes more then 5 minutes, reboot into recovery and delete cache and dalvik.
LoopDoGG79 said:
Well, first how long did you wait? First boot always takes the longest. If it takes more then 5 minutes, reboot into recovery and delete cache and dalvik.
Click to expand...
Click to collapse
It was over 10 minutes. After I did what you said, it keeps rebooting now into recovery mode.
Here's what I currently have on:
1. CWMR 5.8 -Touch
2. TDJ Evo 4 v0
After a few booths I'm still stuck at the splash screen.
You may need a different recovery. The old recoveries did not wipe correctly. I recommend the latest TWRP
bkg.brett said:
You may need a different recovery. The old recoveries did not wipe correctly. I recommend the latest TWRP
Click to expand...
Click to collapse
+1. Here is a flashable zip to TWRP 2.3.3.0.
http://db.tt/uvBu75ph
It doesnt really matter what recovery he's on. The problem is he's not wiping his previous rom before flashing the new rom. On cwm I believe you go to mounts and storage, then go down to format/system. I never used cmw touch so I might be wrong. A safe bet is to google "darkside super wipe" and "darkside cache wipe". Download the zips and save onto your sd card. Then just flash those two before flashing rom. And you can flash the cache wipe again after flashing rom and gapps (its recommended by some devs but I never got the point since the caches havent been built yet)
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
LoopDoGG79 said:
+1. Here is a flashable zip to TWRP 2.3.3.0.
http://db.tt/uvBu75ph
Click to expand...
Click to collapse
Thanks for the help everyone!
I managed to get All Star Rom 5 to load. I'm using that to download goomanager and install TWRP.
I love All Star Rom, but Wifi Calling is a must. I think Infamous is where I'm headed. Any issues with TWRP on that one?
iburnhearts said:
It doesnt really matter what recovery he's on. The problem is he's not wiping his previous rom before flashing the new rom. On cwm I believe you go to mounts and storage, then go down to format/system. I never used cmw touch so I might be wrong. A safe bet is to google "darkside super wipe" and "darkside cache wipe". Download the zips and save onto your sd card. Then just flash those two before flashing rom. And you can flash the cache wipe again after flashing rom and gapps (its recommended by some devs but I never got the point since the caches havent been built yet)
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
I was wiping and doing all that.
So, after I got goomanager, I installed TWRP. Through that I attempted to install Infamous 3.1. Now, all I get is the Samsung Galaxy screen before recovery/booting, and nothing but black. I'm not sure what I screwed up this time around. Any ideas?
proplaya422 said:
I was wiping and doing all that.
So, after I got goomanager, I installed TWRP. Through that I attempted to install Infamous 3.1. Now, all I get is the Samsung Galaxy screen before recovery/booting, and nothing but black. I'm not sure what I screwed up this time around. Any ideas?
Click to expand...
Click to collapse
Agree to disagree
Goo manager wiped your recovery. You need to enter download mode and use odin to put cwm back on. Then flash the twrp zip file that was posted above.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
iburnhearts said:
Agree to disagree
Goo manager wiped your recovery. You need to enter download mode and use odin to put cwm back on. Then flash the twrp zip file that was posted above.
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply. I figured that out after spending 15 minutes looking for a TWRP file to flash through odin. I used CWM and everything worked like a charm. Reflashed TWRP. Then I downloaded Infamous. Didn't flash it through goomanager. Instead booted into TWRP, found it, then flashed. Everything is good now. Thought I was bricked for a few minutes there.
Thanks everyone for your help.
I am new to rooting and rom'ing. I was able to root my Hercules using clockwork 6.0 and was in the process of installing cm10 and it froze up, and after i rebooted it got stuck in a boot loop. I did do a back up of my stock rom and have gotten it to factory reset back to astock rooted rom, not sure if it is my backup stock rom. The process that I read to rom it is to install darkside wipe, then cm10, then gapps. I have wiped data, cache and davlik cache, i am trying to get it to install cm10, but it doesn't seem to want to install. what should i do to get it to start over and get cm10 rom on?
I would only use the Darkside wipe scripts on CWM 5.X. Use Odin to reflash the recovery of your choice and then format system, factory reset, and then flash CM10.
Sent from my Nexus 4 using xda premium
Thanks, I didn't know that, guess the instruction i found were a little outdated. I'll try your suggestion. What do mean by formattin it? (I thought the factory reset does that?) Also how long should it take for cm10 to install?
heath.bse said:
Thanks, I didn't know that, guess the instruction i found were a little outdated. I'll try your suggestion. What do mean by formattin it? (I thought the factory reset does that?) Also how long should it take for cm10 to install?
Click to expand...
Click to collapse
Formatting the system only formats the /system partition and wipe data formats the /data partition.
What do you mean?
Sent from my Nexus 4 using xda premium
I would have made a backup of the stock rom then from the stock rom downloaded goomanager from play store then flash newest twrp recovery, then wiped and installed a appropriate ROM
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
---------- Post added at 06:33 AM ---------- Previous post was at 06:27 AM ----------
Of course your stock rom would have then needed to be rooted
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
heath.bse said:
I am new to rooting and rom'ing. I was able to root my Hercules using clockwork 6.0 and was in the process of installing cm10 and it froze up, and after i rebooted it got stuck in a boot loop. I did do a back up of my stock rom and have gotten it to factory reset back to astock rooted rom, not sure if it is my backup stock rom. The process that I read to rom it is to install darkside wipe, then cm10, then gapps. I have wiped data, cache and davlik cache, i am trying to get it to install cm10, but it doesn't seem to want to install. what should i do to get it to start over and get cm10 rom on?
Click to expand...
Click to collapse
You missed /System as well [hence why the stock ROM booted again otherwise if you actually formatted where the ROM was there is no backup ROM.
You should move to Jellybean [I have used ParanoidAndroid as a daily druver for months now and it is newer [Android 4.1.2].,
No matter which ROM you choose, first boot phone
download ROM Manager [Free is fine]
Open it, grant Super User
Tap top-most option to install Clockwork Recovery and it will walk you through getting etiher the non-touch for free or paying $2 for touch recovery [unless you flashed that via Odin then skip], but need to be sure you have newest CWM and not an old one from a rooting guide that been around.
Boot to recovery wi[e cache
tap advanced wipe dalvick
go back one menu
go to mounts and storage tap to wipe system, and data
go back one menu to main
tap install zip from SDCard
Tap internatl or external wherver you saved it and find the CM 10 you downloaded and tap and flash it
do the same but find where you saved the gapps pack
now restart device and enjoy
continual boot loop...tried everything here.
RealPariah said:
You missed /System as well [hence why the stock ROM booted again otherwise if you actually formatted where the ROM was there is no backup ROM.
You should move to Jellybean [I have used ParanoidAndroid as a daily druver for months now and it is newer [Android 4.1.2].,
No matter which ROM you choose, first boot phone
download ROM Manager [Free is fine]
Open it, grant Super User
Tap top-most option to install Clockwork Recovery and it will walk you through getting etiher the non-touch for free or paying $2 for touch recovery [unless you flashed that via Odin then skip], but need to be sure you have newest CWM and not an old one from a rooting guide that been around.
Boot to recovery wi[e cache
tap advanced wipe dalvick
go back one menu
go to mounts and storage tap to wipe system, and data
go back one menu to main
tap install zip from SDCard
Tap internatl or external wherver you saved it and find the CM 10 you downloaded and tap and flash it
do the same but find where you saved the gapps pack
now restart device and enjoy
Click to expand...
Click to collapse
I got cm10 on for about 20 minutes then CWM updated to 6.x. I flashed a nightly and it's been in a bootloop ever since. However, when I was on CM10 those few brief minutes I could not hear or he heard on a call.
No idea what to do now. I'm stuck on 2.3.6 unless there's some other trick I can do to get this thing to boot...
Why not just try a different rom? Lots of options out there.
Also, watch the dates on the how to's you read. A lot can be outdated.
Sent from my cell phone telephone....
I just tried flashing this ROM. I can't seem to get it to boot right. I installed the ROM and GAPPS through CWM. When I reboot after installation, the Samsung flashes on the screen and there is no boot screen, nothing, black screen of death! I thought it might just take a minute but nothing happens, the screen remains blank. Any advice?
dubjdub said:
I just tried flashing this ROM. I can't seem to get it to boot right. I installed the ROM and GAPPS through CWM. When I reboot after installation, the Samsung flashes on the screen and there is no boot screen, nothing, black screen of death! I thought it might just take a minute but nothing happens, the screen remains blank. Any advice?
Click to expand...
Click to collapse
Did you do a proper wipe?
I flashed that ROM last night and had no issues.
I would restore your backup re download the ROM and make sure your version of clockwork mod is up to date and try again.
Sent from my SGH-I747 using xda app-developers app
KorGuy123 said:
Did you do a proper wipe?
I flashed that ROM last night and had no issues.
I would restore your backup re download the ROM and make sure your version of clockwork mod is up to date and try again.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I am kinda new to this, when you say a proper wipe? I do wipe data/factory reset, wipe cache partition, format system, format data, format cache. Another thing is that I couldn't get my back up to work . So I'm a little stuck. I have the backup files on my computer. Sorry, I'm a noob.
dubjdub said:
I am kinda new to this, when you say a proper wipe? I do wipe data/factory reset, wipe cache partition, format system, format data, format cache. Another thing is that I couldn't get my back up to work . So I'm a little stuck. I have the backup files on my computer. Sorry, I'm a noob.
Click to expand...
Click to collapse
That's a proper wipe (actually its a little excessive but better too much than too little)
If you can get into recovery again (volume+ power and home) do a factory reset and reboot again.
If that doesn't work go back into recovery and flash again. (With wipes again) or flash another ROM.
Definitely make sure you have an updated recovery. (Clockwork mod is up to 6.0 something and twrp is at 2.4.1.0
The new Roms are 4.2.2 and need the updated recovery or they won't wipe and flash properly.
Sent from my SGH-I747 using xda app-developers app
KorGuy123 said:
That's a proper wipe (actually its a little excessive but better too much than too little)
If you can get into recovery again (volume+ power and home) do a factory reset and reboot again.
If that doesn't work go back into recovery and flash again. (With wipes again) or flash another ROM.
Definitely make sure you have an updated recovery. (Clockwork mod is up to 6.0 something and twrp is at 2.4.1.0
The new Roms are 4.2.2 and need the updated recovery or they won't wipe and flash properly.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Ahhhh, my CWM is out of date. Thanks man.
KorGuy123 said:
That's a proper wipe (actually its a little excessive but better too much than too little)
If you can get into recovery again (volume+ power and home) do a factory reset and reboot again.
If that doesn't work go back into recovery and flash again. (With wipes again) or flash another ROM.
Definitely make sure you have an updated recovery. (Clockwork mod is up to 6.0 something and twrp is at 2.4.1.0
The new Roms are 4.2.2 and need the updated recovery or they won't wipe and flash properly.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Well said! This board needs more people like you! I too will check my TWRP version before I flash Carbon. Thanks again!