Related
Any micro USB cables that you guys would recommend over the OEM original cable.
I seem to be one of the very few that have problems with the original cable fitting snuggly. Yes, the door is open all the way til it clicks, yet the cable easily falls out.
If anyone has a suggestion of another cable or has the same problem with a fix that I just somehow missed after searching for a couple of days, it would be greatly appreciated.
I had the same problem. After about a month of use it just came completely loose and would only stay in if I propped it up a certain way. I tried a friend's charger and it worked fine (likewise my charger was loose on his captivate).
I just took the usb cable from my external hard drive and that one fits very snuggly, unfortunately it is also much shorter
I'm also having this issue. I wonder why...
foofiebeast said:
I had the same problem. After about a month of use it just came completely loose and would only stay in if I propped it up a certain way. I tried a friend's charger and it worked fine (likewise my charger was loose on his captivate).
I just took the usb cable from my external hard drive and that one fits very snuggly, unfortunately it is also much shorter
Click to expand...
Click to collapse
Yes, this is exactly what I have to do for mine to charge. So I guess I'll have to just start looking for one that will work for me. It seems just any other standard micro USB cable will do the trick. Thanks a lot my friend.
jayrod88 said:
I'm also having this issue. I wonder why...
Click to expand...
Click to collapse
Well upon further inspection, you can see how the top of the phone is curved and if you look at with the USB door open from the top and tilted slightly back you can see how the jack actually looks crooked inside the phone. I'm quite sure that this is because of the curved top parallel to the circuit board that has the jack is too tall. And I think for some reason I might need to trim down the micro end a bit on the front side..it looks like its hitting the front side of the phone.
I'm looking for a replacement cable as well...even OEM is fine. The case around mine cracked off one night when I feel asleep playing on my phone. Mine was always kind of loose compared to the att charging cable which is nice and tight. Does radio shack carry cables like this?
Sent from my SAMSUNG-SGH-I897 using XDA App
i called AT&T about this with my cappy and they said that the charging port was bad and sent me a new phone , thats been 3 mo ago and the problem hasnt recurred.
(just a thought)
Search Amazon for "blackberry usb cable micro usb". The first result should be it, it's a very high quality, shielded cable. To get a solid, snug fit I suggest a razor or a knife to easily cut back some of the rubber around the micro tip. Works amazingly well. I could even make it work before I trimmed it.
just to elaborate, the specific micro end is called a "micro b " usb connection.
not to be confused with mini or micro a
of course the other end is just standard.
The place I work has a 5' nice quality cable that fits my Captivate tight. They got them to go with the 2100mA USB Car Charger we sell. Cost on the cable is $ 4.99 plus shipping (about $2.99 first class parcel).
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
I'm not sure if its quality, or just chance, but I've found that only some 3rd-party cables will work. I've tried a blackberry one that didn't work, and a really cheap one that did.
I would suggest keeping the one you got from samsung, just in case.
I'd like to know if anyone else had issues with cables not working?
I got a Samsung cable designed for the galaxy S on Amazon for like $6 with free shipping.
Sent from my SAMSUNG-SGH-I897 using XDA App
Jmurph3 said:
Any micro USB cables that you guys would recommend over the OEM original cable.
I seem to be one of the very few that have problems with the original cable fitting snuggly. Yes, the door is open all the way til it clicks, yet the cable easily falls out.
If anyone has a suggestion of another cable or has the same problem with a fix that I just somehow missed after searching for a couple of days, it would be greatly appreciated.
Click to expand...
Click to collapse
I had the same problem.
I used some tools(hammer,knife, etc) to fix the cable.
Now my cable works fine!!
Sent from my phone
I just used a razor blade to trim the rubber back, works great.
If you look at your cable. The black part and the silver part(part that goes in your phone) is not in a straight line.
Just try to make it straight. And use a knife to cut the rubber of the edge a little bit.
That should do the trick.
Sent from my phone
I haven't read all of the posts so I don't know if someone has already posted a solution to this problem, so I'll just answer.
I had this same problem. If you notice their are two tiny metal teeth that lock the charger into the phone. These teeth no longer stick out as far as they used to. That is why you are having this problem. The teeth are not bent. It is the micro usb plug that is around it. All that you need to do is give it a firm bush on the table. Bend the plug away from the teeth so that they stick out more. This fixed my problem.
When you put it back into your phone, you will notice that the plug is no longer in the phone at an angle.
bluemoon1221 said:
If you look at your cable. The black part and the silver part(part that goes in your phone) is not in a straight line.
Just try to make it straight. And use a knife to cut the rubber of the edge a little bit.
That should do the trick.
Sent from my phone
Click to expand...
Click to collapse
You should saved me from buying 3 more cables. I distroyed my OEM cable to make a jig because I bricked my phone. I ordered 3 sets of cables and they all had the same problem.... Usb kept popping off. So I was just about to go out and order 3 more sets if cables, this time OEM untill I decided to read this tread. It never occured to me that it was fitting in well because of the extra rubber on the connector. I trimmed it down and now the cable snapped in perfectly like it was supposed to. Thanks for the fix!
Sent from my SAMSUNG-SGH-I897 using XDA App
I'm afraid of buying the wrong cable off Amazon. There is so much out there. Can anyone post a link?
[email protected] said:
I haven't read all of the posts so I don't know if someone has already posted a solution to this problem, so I'll just answer.
I had this same problem. If you notice their are two tiny metal teeth that lock the charger into the phone. These teeth no longer stick out as far as they used to. That is why you are having this problem. The teeth are not bent. It is the micro usb plug that is around it. All that you need to do is give it a firm bush on the table. Bend the plug away from the teeth so that they stick out more. This fixed my problem.
When you put it back into your phone, you will notice that the plug is no longer in the phone at an angle.
Click to expand...
Click to collapse
I know this is getting old, but it took me about 2 hours to find an answer that WASN'T recommending to just make sure the slider was all the way open. For no reason at all, my phone cable just wouldn't hold a real connection this morning... your answer saved the day
For cables that are good quality and cheap, go to www.meritline.com ....... I have never gotten a bad cable from them, typically I use their HDMI cables but the USB cables are less complex and work just as well. My last usb cable was one of theirs.
Greetings.
I have a G2 that i bought for $50 for my wife that has an inoperable touchscreen..
I recently fixed my own G2 (with another G2 i bought for parts) which had a faulty flex cable and so i thought i'd fix my wife's with the extra parts.
The digitizer is good on the phone, I tested it by taking apart my own G2. The flex cable only has a very small cut, but the display is not affected at all.
I narrowed it down to the whole Flex cable assembly though, i'm not sure if its not reading the digitizer right or what.
I have another Flex cable assembly with a broken flex cable (but the rest of it works, i think)
Is there any way I can fix it?
Don't want to spend $20 on another flex cable.
In short, i have One G2 "for parts" that has a broken flex cable, trying to fix another G2 with unresponsive touchscreen.
sounds like you answered your own question, unless you can fix the flex cable you will need to get a new one. the only other possibility (from what youre saying) is its a software problem, but i doubt it
Well I wanted to know if I could maybe replace just the flex cable part of the flex cable assembly. If not, then I will probably have to buy the whole thing
Sent from my HTC Vision using xda premium
unless by "flex cable assembly" you mean separate the flex cable from the chassis, no you cant easily fix part of the flex, its all one massive cable
Yes, that is exactly what I meant. Damn.
Thank you. Now I'm off to buy a flex cable... woo...
Sent from my HTC Vision using xda premium
so if you buy the flex seperate from the chasis it may be helpful to get some of the super thin 3m tape to adhere it. using standard tape (like scotch) is a pain. the 3m stuff is cheap, super thin, double sided, and you can get precut strips. its easy to find on ebay
Sent from my HTC Vision using xda premium
I just noticed my mini USB port is fairly loose that when the usb cable is angled at a particular direction charging stops.
I tried the same cable at two other phones and no problem. I visually inspected the port and it seems the metal that surround and supports the mini usb broke at the side making the top and bottom part separate from each other. It makes the port not a snug fit but a losse fit... And so I wonder if anyone else had this issue? I've only had my S3 for a few months and I use it roughly the same as my old phones (yes, I do use it while charging) and they didn't have this problem... Is it really that easy to break or do I seem to be mistreating it?
Note: The small pointy thing is ok, so I can still charge and do other stuff. Only issue is that it's a loose fit.
zaghy2zy said:
I just noticed my mini USB port is fairly loose that when the usb cable is angled at a particular direction charging stops.
I tried the same cable at two other phones and no problem. I visually inspected the port and it seems the metal that surround and supports the mini usb broke at the side making the top and bottom part separate from each other. It makes the port not a snug fit but a losse fit... And so I wonder if anyone else had this issue? I've only had my S3 for a few months and I use it roughly the same as my old phones (yes, I do use it while charging) and they didn't have this problem... Is it really that easy to break or do I seem to be mistreating it?
Note: The small pointy thing is ok, so I can still charge and do other stuff. Only issue is that it's a loose fit.
Click to expand...
Click to collapse
I was just dealing with this last night. It may be a little flimsy. Hopefully it doesn't get worse
I know... If it gets worse, I hope I don't get caught somewhere having unable to flash a stock rom via odin... To claim a clean warranty... Afterall, the damage is on the hardware and can be seen outside
Is it the original cable? I know my charger cable is stupid loose but my USB cable is fine.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
zaghy2zy said:
I know... If it gets worse, I hope I don't get caught somewhere having unable to flash a stock rom via odin... To claim a clean warranty... Afterall, the damage is on the hardware and can be seen outside
Click to expand...
Click to collapse
If it is actually damaged, why not get a replacement now?
Terrold said:
Is it the original cable? I know my charger cable is stupid loose but my USB cable is fine.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yup, original cable that came with it... Cable is fine, but the port isn't...
thisiseric said:
If it is actually damaged, why not get a replacement now?
Click to expand...
Click to collapse
I'll have to check with Wireless Wave where I bought the phone... Because it's either they send it for repair which would take weeks and they'd give me a crappy temporary phone... Or if I'm lucky replace it on the spot... Which I doubt... So I'll have to weigh in the options... It's not much of an issue right now but pretty sure it will be soon enough so I have to ask them soon... I'm just doing some poking around to see if other people experience this as well if it's a fairly "common" issue then they might give me a replacement if I tell them fixing wouldn't help because it may just happen again.
thisiseric said:
If it is actually damaged, why not get a replacement now?
Click to expand...
Click to collapse
This...
Sent from my SAMSUNG-SGH-I747 using xda premium
My Xperia Play flex cable broke a month or two ago, and I didn't feel bothered to fix it. Everything was working before it broke.I left it disassembled, and each part in an anti-static bag in bubble-wrapped packaging. I recently bought a new flex cable off of eBay, and installed it into my XPlay. Everything was working fine with the exception of my touch screen. I remember that the touch screen was working flawlessly before i had replaced the flex cable.
Is there any way to check if the new flex cable is just malfunctioning or the digitizer is actually broken? (or could it just be a software issue?)
RoboticBuddy said:
My Xperia Play flex cable broke a month or two ago, and I didn't feel bothered to fix it. Everything was working before it broke.I left it disassembled, and each part in an anti-static bag in bubble-wrapped packaging. I recently bought a new flex cable off of eBay, and installed it into my XPlay. Everything was working fine with the exception of my touch screen. I remember that the touch screen was working flawlessly before i had replaced the flex cable.
Is there any way to check if the new flex cable is just malfunctioning or the digitizer is actually broken? (or could it just be a software issue?)
Click to expand...
Click to collapse
have you also checked if the slider flex (it manages digitizer, physical buttons, and LCD converge) is damaged...
Sorry for the off topic, but can you link me to where you bought your flex?
I'm stocking up just in case mine breaks again.
If it's possible, try flashing a stock FTF. Then there's also a case of old and new version flex cables, as described here-
http://forum.xda-developers.com/showthread.php?t=2224237
Regards.
Hi guys.
Recently, I had to change out my micro usb charging port because the previous one stopped working. I don't know if it had to do with heat issues and messed up the soldering. Sprint said it was because of water damage, but I'm very very protective of my phone and have yet to have any contact with water in it.
When I got the piece, I figured that I would make a video on how easy it is to replace the piece. I've never contributed to this site, so I figured I'd like to do something
I ordered the flex piece from this site for $11.
http://phonepartsusa.com/product-ty...te-2-l900-charging-port-flex-cableflx-sam-681
Never done something risky like this before, but it sure was rewarding getting it done. In the mean time, when I waited for the piece to come through in the mail, I bought a charger from Ellis batteries for $15 and a separate battery. I wonder if I can return it :3.
Hope it's helpful
tormsto also
djinnerman said:
Hi guys.
Recently, I had to change out my micro usb charging port because the previous one stopped working. I don't know if it had to do with heat issues and messed up the soldering. Sprint said it was because of water damage, but I'm very very protective of my phone and have yet to have any contact with water in it.
When I got the piece, I figured that I would make a video on how easy it is to replace the piece. I've never contributed to this site, so I figured I'd like to do something
I ordered the flex piece from this site for $11.
http://phonepartsusa.com/product-ty...te-2-l900-charging-port-flex-cableflx-sam-681
Never done something risky like this before, but it sure was rewarding getting it done. In the mean time, when I waited for the piece to come through in the mail, I bought a charger from Ellis batteries for $15 and a separate battery. I wonder if I can return it :3.
Hope it's helpful
Click to expand...
Click to collapse
Alot of my friends had this issue, and so did I, luckily I was covered by warranty. But I was f***ing heartbroken when it happened. When/if this crap happens again I will know to find your post. This is freaking awesome!
I almost feel like samsung knew they put fragile ports and crap in the phone because from what ive noticed most of the components are attached with ribbon cables instead of soldered. I ordered a new headphone jack due to worn out pins, and I wont be suprised if I have to replace the usb port one day.
Sent from my SPH-L900 using XDA Premium 4 mobile app
vee1287 said:
Alot of my friends had this issue, and so did I, luckily I was covered by warranty. But I was f***ing heartbroken when it happened. When/if this crap happens again I will know to find your post. This is freaking awesome!
Click to expand...
Click to collapse
Awesome It was a crap feeling that I had to dish out $50 for a battery and charger that was only temporary (guess I'll be using the extra battery as a means of emergency power, especially when going downtown)
m4xwell - I think it sort of goes both ways. Essentially, the pieces being easily replaced was in fact a smart idea. Of course the downside is that the pieces are a little more fragile as you said. Thing is, with the constant wear and tear in plugging in the charger, I would imagine that the ports would get worn out in a matter of time. I feel micro usb vs mini usb has some weird differences, with the micro usb being more fragile. My old nokia and LG flip phone had zero problems with the charging port. Guess the dinosaur age is still king
Samsung Galaxy Note 2 Parts Replacement
I also know a best place to buy Samsung Galaxy Note 2 Parts Replacement. That is HCQS. It is a wonderful supplier which special provides mobile phone parts replacements. For more you can visit hcqs.com.cn.