I'm using ARHD 9.7.2 and having issues everytime I end a call.
Not sure if this is ROM issue,but it started appearing after I flashed the rom.
Sometimes, but quite often, call ends and everything works fine, but after a short while, when I turn on the phone, I get the full call screen with grayed out "end call" button (from the previous call), I can't click on it (on the big red "end call" button), but I can click on the buttons to the left and right (contacts and dialer I think).
Sometimes I can kill the call screen and go back to home screen, but it does pop up after a while again, usually with completely unresponsive buttons. I can't even get the restart menu, so I have to turn off the phone by holding on button.
Anyone know what is causing this issue? It's really annoying.
Related
I've just installed Schaps 3.54c on a friend's JasJam. She now has a strange issue where she turns the screen on, taps on the Today screen to unlock the device and then pressing the green phone button doesn't do anything. But if you tap Start then go into Programs or Settings and THEN try the green button, it works fine!
Has anyone experienced this?
i have notice this little bug now and again, i just have to click the ok button then i get all control back to the call button.
Not sure what causes it though.
Its like another proggy is running in the background.
Hi Guys,
Ive noticed that sometimes when i use the speakerphone (either by pushing the on-screen button or flipping the phone over), it works fine. However, once the call is over, the touchscreen is deactivated it seems. Nothing works. Cant press anything. As for the hardware buttons, the windows button works, and the power button works. The volume, call, and end call buttons do nothing.
Not sure if this is relevant, but I only notice it if the phone was flipped over (with touchscreen down). If i used speakerphone with the phone facing up, doesnt seem to happen.
The only ways ive found to fix this are to soft reset with that little button under the cover, or to miss a call. (obviously, if a call comes in, I cant answer it as none of the ways you'd use to answer a call still work). After the call is missed though, the touchscreen comes back to life.
any ideas??
thanks
havent notice quite this.. but something similar...
when i wanna make a quick phone call
i open the keyboard type name of contact,
select the contact and hit enter to make the
phone call.. when i close the keyboard to turn
the phone to my ear, half of the screen looks
normal and have of it looks all MESSED UP...
im sure is not a hardware problem or anything.. ( well i hope so )
i think is not bcuz it only do it on that situation..
besides that my screen is normal..
bump
phone been around a while now...maybe someone else noticed this problem...
I've noticed that sometimes my phone will go into "sleep" mode like when you quickly press the power button. Maybe a quick tap of the power button to wake it up will help.
So I've got a minor quibble with my new Sprint TP2. A friend and I both bought TP2s (both with Sprint) and we see different behavior with the proximity sensor. When he moves his face away from his phone, it comes back to the phone. It seems to me that should be the default behavior. My phone, however, flashes at the phone screen, then goes to the Home screen. This irritates the hell out of me since I have to hit the Send button to get back to the Phone screen. Normally, that's no biggie, but if I have to get to the keypad, I have to move my face away, wait for it to flash and go to Home, hit the Send button, then press the Keypad button just so I can start to enter my voicemail password. I'm using the stock ROM, and I've only installed Google Apps and Facebook (but this was happening before I installed any apps). Are there any reg hacks to control this behavior?
TIA,
-djb
Just wondering if there is a way (or an app) that enables the screen to remain off until the power button is pressed when there is an incoming call? At present I'm using Dialer1 and I often find I've missed a call and the screen has remained on since the time of the call. Obviously this chews through the battery so I'm keen to find some way of either making the screen switch off post-missed call, or require that the power button be pressed to switch the screen on when a call comes in...any help most apreciated!!
If you're using a custom Marshmallow ROM, whether it's Resurrection Remix, Vanir, CandySix, Bliss, Xenon, or any other, and you're experiencing calls being dropped, I think I might have found a solution for you, and it's easier than you think! After hours of downloading, flashing, and testing different ROMs, calling friends and family to test for calls getting dropped, google searching everywhere, etc. I found out that a particular combination of settings might be triggering the phone to drop calls, or as I'll explain in a minute, to hang up.
As it turns out, there are a couple of settings in the new custom ROMs that might cause the problem. The first one is the "Tap to Wake" setting. This nice little feature allows you to turn on the screen by double tapping it. The second setting is the "End Call" by pressing the power button. Thanks to our lovely LG G3 back power button, it's really easy to finish a call by pressing the power button.
Both settings are wonderful and harmless on their own, but when they're combined they will definitely cause problems. Let me explain. You see, when you're making a phone call, once you dial and hold the device near your ear, the proximity sensor detects your face and turns off the screen. This avoids unwanted touchscreen taps (Your ear might accidentally touch the hang up button if the screen was on). However, when the screen is off, your ear still touches the screen multiple times while you talk, your ear becomes like a finger, tapping and double-tapping the screen while you're happily talking to your other half.
Now, normally, this ear-tapping doesn't cause any problems, the screen is off after all, right? Well, bear with me a little longer and you'll see what's going on here.
You might think that when the screen is off, double tapping it sends a "turn on screen" signal to the phone, right? Well, not really. The double tap only simulates a power button press... That wouldn't normally cause any issues, right? But, if you're in the middle of a phone call, what does the power button do? Yes, you guessed it right. It hangs up.
So, that's what's happening, calls are not getting dropped, you are literally hanging up! with your ear!
FIX: Do not have both "Tap to Wake" and "End Call Power Button" enabled. You have to disable one of them.
I really hope this helps a lot of unsuspecting users like me that were concerned about this call dropping issue. Hopefully ROM developers notice this too and help us fix it for real so that we can have both settings enabled.
and so in the sense that i never enabled that to begin with what is the countermeasure?
Dropped Calls
thelgog said:
and so in the sense that i never enabled that to begin with what is the countermeasure?
Click to expand...
Click to collapse
If you don't have any of those settings enabled, then you're good! If you're still experiencing dropped calls, it might be the modem, or the kernel, the signal, the ROM, it could be anything... that's why I spent hours trying to find the cause of my calls getting dropped... hope you find yours...