I've just installed Schaps 3.54c on a friend's JasJam. She now has a strange issue where she turns the screen on, taps on the Today screen to unlock the device and then pressing the green phone button doesn't do anything. But if you tap Start then go into Programs or Settings and THEN try the green button, it works fine!
Has anyone experienced this?
i have notice this little bug now and again, i just have to click the ok button then i get all control back to the call button.
Not sure what causes it though.
Its like another proggy is running in the background.
Related
Hi all,
My XDA IIs works well before. But few days ago the Power button doesnt work properly, it can turn on the phone, hold to turn off the back light, but I can't use it to turn my phone screen off like before. Anyone has same problem ?
Can you see any part of the screen? It might just be that the backlight adjustments are set too low when the unit isn't cradled. You might be able to see the screen in daylight.. or maybe it was inside your home. I forgot where I was at when it happened to me. In anycase, if you can see a bit of images on your screen, go into the Backlight properties and change the setting to your liking.
Good luck..
The problem is i can just press the power button to turn off my phone BEFORE (the screen is completly off), and NOW it doesnt work at all ! When my phone was off, I can press the Power button to turn it on, or when I hold it for few seconds the back light will be turned off, but press once to turn off. I dont know why, if somthing wrong with the Power button it should be doesnt work at all, that's mean i cannot turn on my phone as well. But other functions of the Power button are still work well, except the 'Turn off' :roll:
power off doesn't work anymore
I have the same problem here. I can't use the power button to power off my qtek 9090!!
i can use the power button to turn my pda on and to switch the background light on and off - so the "hardware side" of the power button is working.
however, i can't use the power button to turn off the device. it's very annoying, because i can't put it in my pocket after finishing a call :-(
this should be some sort of a software problem - so i hard resetted my device (a couple of times) - but that didn't help!
can anyone help?
thanks,
lorenz
the ba doesn't turn off it is always on staand by mode. ->settings -> system -> button lock
this will stop any missed call because when the ba is in standby the power button is the only one to work
power on is no problem. i can't put my BA into standby mode. if i press the power button while the BA is turned on, nothing will happen. the screen will stay on, the background light stays on.
i have no way to put it into stand-by with the power button!
try this and see if it works. it's a software app that wil rest, shut down, and turn the screen off. just copy it to your BA temp directory and install it.
power button problem
nemchua
Is your problem solved ?
Because I have the same problem.
Power of switch doesn't work !!!
Any help would be welcome.
power button problem
Does anyone solve the problem???
Had the same problem...
I had the same problem going on for about two weeks or so...never changed anything and it went away all by itself.
The problem has not come back now in over 4 months.
Sure would love to know what the problem was tho...
Greetings,
Noddy
Power Off does not work
Add my name to people with this problem.
The only event I can link it to is this: I deleted my Motorola Bluetooth headset and installed a Logitech headset. I noticed the problem (can't turn OFF with POWER BUTTON) soon after that.
same problem for me ..... someone must know !!!!
I think it is a hardware problem. The contact is not making cleanly. Disassemble and spray time, perhaps.
It's a standard push switch, easy enough to replace, I occasionally list themon ebay but any phone repairier should have them in stock.
Richard
i had same problem yesterday afternoon, but it is ok now. recovered by himself
Write again in two weeks and let us know if it is still healthy. In my case, anintermittent problem became continuous.
Can't turn the screen on after pressing power button
I have a problem with my Bell Atrix. After pressing power button to lock the screen, i can't wake up the screen up by pressing that button again. Could anyone tell me how to fix it pls.
Is anyone else having issues with Traveler in WM6?
I'm using an AT&T based Pandora Kitchens ROM and I'm getting the following problems:
1. Screen is off, I press the power button to turn it on. The screen turns on and I see my Today screen or whatever program I was using when I turned it off but that's it, I can't do anything else. Screen and buttons don't respond. Pressing the call end button results in the short beep that it normally sounds when you're on the Today screen and press it. But I have to soft reset to use my phone.
The same problem happened a few times when someone tried to call me. I was watching my phone when I tested this. Screen was off, I rang myself frlom another phone, the screen turns on and the phone symbol appears next to the signal icon in the top bar but after that the phone freezes as above. Soft reset needed.
2. Phone is charging using the wall adaptor. Green light is on. I pull the power cable out of the phone and press the power button, nothing happens. I had to soft reset.
3. Turn phone on, tap Start menu, wait about 15 seconds before Start menu appears!
Any ideas?
Hi,
I have the following problem with AE Button plus with my Touch HD.
I had the problem with closing the phone during i was taking it out of my pocket.
I installed AE Button plus and assigned only to the Red button a function. All is OK, when the phone is ringing the Red button is not working, but the problem is, that when i pick up, it is not working again and i have to end the call with the touch screen button and it is very annoying.Is it possible this Red button function to work only up to the moment i have answered and after that to have normal button functionallity?
PS. Sorry for my bad English!
AE Button Plus - please help
Please, help me with the above issue!
Thanks in advance!
why is it annoying to use the touch screen to end the call?
I would suggest to leave alone the single click of red button but instead map a double click function you want to the red button.
I've had this problem previously. I love AEBPlus and think it is probably the best app on the phone. You need to uncheck the option under 'other options' for 'drop on red key'. Paradoxically this should not be checked. When checked I cannot drop on red key but when unchecked I can end call using this hardway end key. Let me know how you get on!
The AE Button Plus didn't seem to work on my Blackstone (HD). It would work after being reset but after a while, the mapping has no effect anymore. I want to map the volume up/down button to "Up/Down Arrow" and the Long Press of the Volume Up button to run the S2U2 application. Anyone has similar issues?
I have problems with AEButton too. I assign "volume up" to turn display on/off at one click. Sometimes, it works. Sometimes, it brings up the voume control. Annoying.
tatou said:
I have problems with AEButton too. I assign "volume up" to turn display on/off at one click. Sometimes, it works. Sometimes, it brings up the voume control. Annoying.
Click to expand...
Click to collapse
That is exactly my problem. I should not have paid for the software if I knew that it works intermittently.
Do you have some taskbar installed? Try to remove.
It's been three days since I have a small bug sometimes.
Sometimes when I press the button to turn on my device the phone wake up (the buttons light up) but the screen sty off... The only thing I can do is a softreset and then everything is all right...
Does someone have the same problem and is ther a fix?
Thanks for the answer
Happens to me sometimes too
I guess the ROM is not 100% stable yet... Let's pary 6.5 will be out soon ! (With TF3D 2.5 or even better with the new sense interface !)
same problem here, if he stays off you can hear de volume butons if you press them so it is only the screen or something.
also when i slide out the keyboard, the screen is rotating realy slow and bit by bit. hope for a soon spl and custom (nrg) rom
paulaafjes said:
same problem here, if he stays off you can hear de volume butons if you press them so it is only the screen or something.
also when i slide out the keyboard, the screen is rotating realy slow and bit by bit. hope for a soon spl and custom (nrg) rom
Click to expand...
Click to collapse
Have this too, sometimes. I thought it was due to WAD which sometimes uses way too much CPU.
But the screen not comming off is really annoying! And I don't know why this happens.
I removed SPB Pocket Plus and did not experience this problem again - I think it's just coincidence, but still... You could try!
UPDATE
It seems to happens very very more often if I use the camera apps.
Sebacestmoi_666 said:
It's been three days since I have a small bug sometimes.
Sometimes when I press the button to turn on my device the phone wake up (the buttons light up) but the screen sty off... The only thing I can do is a softreset and then everything is all right...
Does someone have the same problem and is ther a fix?
Thanks for the answer
Click to expand...
Click to collapse
1 More here..
got the same problem .... but then I just keep trying to turn the screen on with the on/off button .... that always works after a few tries
Text msg wont wake up phone
Is this normal? when I receive a text msg, the phone doesnt wake up. My TyTN II woke up when a text msg came through
I'm using ARHD 9.7.2 and having issues everytime I end a call.
Not sure if this is ROM issue,but it started appearing after I flashed the rom.
Sometimes, but quite often, call ends and everything works fine, but after a short while, when I turn on the phone, I get the full call screen with grayed out "end call" button (from the previous call), I can't click on it (on the big red "end call" button), but I can click on the buttons to the left and right (contacts and dialer I think).
Sometimes I can kill the call screen and go back to home screen, but it does pop up after a while again, usually with completely unresponsive buttons. I can't even get the restart menu, so I have to turn off the phone by holding on button.
Anyone know what is causing this issue? It's really annoying.