Develop Bugs

Can't get phone rooted at all

I've been at this for awhile and anything I try doesn't work. I used the SDK & PdaNet drivers on Win-7 x64, none have worked at all. "Offline" will only show twice after pressing recovery, I even used the vid posted by Kingofroyo and it didn't work either. I tried 2 sd cards also, adb works on my rooted g1 perfectly but the slide wont work in recovery mode. I used the guide by Eugene and followed every step but loop is the problem.

I dont think the sd is the problem or the drivers. You probably are missing a step somewhere. I have rooted the slide 3 times and the incredible (with the impossible root method) 4 times. It isnt a driver problem. Not putting you down but i have done every method.
Can you explain step by step what ou are doing?
Sent from my ADR6300 using XDA App

I had the same problem but I have xp. Mine would show up only twice. My advise to u is not to use the loop method. I had to type adb devices manually. Once it has been type u can press the up arrow key and it will put the command back in for u all u have to do is press enter. I did that and once it shows offline the second time stop doing that and move on to the other steps. I'll be honest it takes good timing good luck.
Sent from my MR1 V4 Remix 3G using XDA App

jdkoreclipse said:
I dont think the sd is the problem or the drivers. You probably are missing a step somewhere. I have rooted the slide 3 times and the incredible (with the impossible root method) 4 times. It isnt a driver problem. Not putting you down but i have done every method.
Can you explain step by step what ou are doing?
Ive followed everything in eugene's guide, this isnt my first time rooting a device. Every step in his post was followed, nothing was skipped.
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
slinky1914 said:
I had the same problem but I have xp. Mine would show up only twice. My advise to u is not to use the loop method. I had to type adb devices manually. Once it has been type u can press the up arrow key and it will put the command back in for u all u have to do is press enter. I did that and once it shows offline the second time stop doing that and move on to the other steps. I'll be honest it takes good timing good luck.
Sent from my MR1 V4 Remix 3G using XDA App
Click to expand...
Click to collapse
Same for me, it shows it twice only then that's it...loop is to quick for me to catch it, since it flashes pretty quick.

U will have to try the manual method then. My wife's slide the loop worked perfect I was done in 5mins. Once u get the manual method down it will be cake from there.
Sent from my MR1 V4 Remix 3G using XDA App

slinky1914 said:
I had the same problem but I have xp. Mine would show up only twice. My advise to u is not to use the loop method. I had to type adb devices manually. Once it has been type u can press the up arrow key and it will put the command back in for u all u have to do is press enter. I did that and once it shows offline the second time stop doing that and move on to the other steps. I'll be honest it takes good timing good luck.
Sent from my MR1 V4 Remix 3G using XDA App
Click to expand...
Click to collapse
+1 this is what happened with my incredible. And my friends slide
Sent from my ADR6300 using XDA App

I have some Q's though:
-Some tell me that phone can't show "hboot usb" when you start loop
-i keep hearing about this "eng build" but is that for after your rooted..or before
-does setcpu work yet?

Ace42 said:
I have some Q's though:
-Some tell me that phone can't show "hboot usb" when you start loop
-i keep hearing about this "eng build" but is that for after your rooted..or before
-does setcpu work yet?
Click to expand...
Click to collapse
Couldn't tell u anything about the hboot. The eng build is after root. Setcpu works but it doesn't overlook.
Sent from my MR1 V4 Remix 3G using XDA App

slinky1914 said:
Couldn't tell u anything about the hboot. The eng build is after root. Setcpu works but it doesn't overlook.
Sent from my MR1 V4 Remix 3G using XDA App
Click to expand...
Click to collapse
thanks, gonna try it again in a few.

Nope...It still doesnt work, are you guys using 32bit?
I could try vista to see if it works on there.

Ace42 said:
Nope...It still doesnt work, are you guys using 32bit?
I could try vista to see if it works on there.
Click to expand...
Click to collapse
64 bit
Sent from my ADR6300 using XDA App

jdkoreclipse said:
64 bit
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
oh ok, I know there's just something wrong...It will show it only on the mytouch screen before going into rec mode, it's too fast for me to do crtl+c at the right moment. Usb debug is on in settings, checked it twice.

Ace42 said:
oh ok, I know there's just something wrong...It will show it only on the mytouch screen before going into rec mode, it's too fast for me to do crtl+c at the right moment. Usb debug is on in settings, checked it twice.
Click to expand...
Click to collapse
Manually do the adb devices thing
Also, are you pulling the usb and re inserting it at the right time?
Sent from my ADR6300 using XDA App

jdkoreclipse said:
Manually do the adb devices thing
Also, are you pulling the usb and re inserting it at the right time?
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
I'm gonna ask my bro to pull it so i can keep typing adb devices, it shows offline about 4-5 secs after pressing reboot.

I hade the same problem but what worked for me was to listen to the usb notification sound on your pc. It beeps (on mine at least) like 3 times. This served as a warning to get ready to hit ctrl-c. I personally hold down ctrl as soon as I hit the power button on my phone. As soon as you see the loop stutter the next one will be offline. Hit c! Then y. Then adb devices. You should see offline (or sometimes already recovery) then you can unplug/plug and go on with the steps. Hope that helps.
SySfS

Ok try this "remove your sim card" it worked for me for some reason the sim card has something to do with the ability to cache the state of the device possibly do to it checking for a sim lock or something.
Also have patience its all about timing the loop.bat is by far the easiest way.
Sent from my T-Mobile myTouch 3G Slide using XDA App

[Q] can't connect in android

hello,
I have installed XDandroid on my htc touch pro2. But i can't connect to my network (provider). I search for many days now, but i can't find any solution.
i have the manila version on my htc.
Thnx in advance.

dubbelr said:
hello,
I have installed XDandroid on my htc touch pro2. But i can't connect to my network (provider). I search for many days now, but i can't find any solution.
i have the manila version on my htc.
Thnx in advance.
Click to expand...
Click to collapse
#1 reason is probably the force CDMA command in the startup.txt. If you're CDMA, you need it to =1, if you're GSM you need it to =0. Check that & get back to us.

thnx for helping
that was the problem

i am having ths same issue with sprint. Ive tried to check and uncheck the force cdma and neither work. Where do i actually look to see it its set to 0?

swaters3 said:
i am having ths same issue with sprint. Ive tried to check and uncheck the force cdma and neither work. Where do i actually look to see it its set to 0?
Click to expand...
Click to collapse
startup.txt. Perhaps you need to read the FAQ my friend.

swaters3 said:
i am having ths same issue with sprint. Ive tried to check and uncheck the force cdma and neither work. Where do i actually look to see it its set to 0?
Click to expand...
Click to collapse
You are on Sprint, so Force CDMA=1. Also probably the number one reason you have no service is the SIM card is still in. Remove the SIM and re-try Android.

arrrghhh said:
startup.txt. Perhaps you need to read the FAQ my friend.
Click to expand...
Click to collapse
I read throught the faq and tried everything but it still doesnt connect. Im gonna download it again and try again.
thanks

demonlordoftheround said:
You are on Sprint, so Force CDMA=1. Also probably the number one reason you have no service is the SIM card is still in. Remove the SIM and re-try Android.
Click to expand...
Click to collapse
I have tried removing the sim card in the past and i tried again. now what happens is that with force cdma checked it keeps trying to connect and then disconnects 20 seconds later over and over. I try to access the wireless networks settings but because it keeps disconnecting it goes back so it doesnt have achance to search for wireless networks.
If i dont force cdma then nothing happens and when i search for wireless networks it just keeps and searching but nothing happens. any help would be appreciated.

So wifi has nothing to do with CDMA/GSM... Typically wifi gets hosed from people who update their zImage but not their modules - they go hand-in-hand and while you can run without the modules, stuff like wifi won't work at all.

arrrghhh said:
So wifi has nothing to do with CDMA/GSM... Typically wifi gets hosed from people who update their zImage but not their modules - they go hand-in-hand and while you can run without the modules, stuff like wifi won't work at all.
Click to expand...
Click to collapse
sorry i wasnt clear. i read through the faq and one suggestion is to go to settings and search for wireless networks meaning sprint atat etc. i actually do connect via wifi but i want to connect via sprint so i can use android as my operating system and play with it. any help would be appreciated.

swaters3 said:
sorry i wasnt clear. i read through the faq and one suggestion is to go to settings and search for wireless networks meaning sprint atat etc. i actually do connect via wifi but i want to connect via sprint so i can use android as my operating system and play with it. any help would be appreciated.
Click to expand...
Click to collapse
Ok you're still not being clear.
I assume your issue is you can't connect to the internet via the cell radio? Thru Sprint's network instead of wifi?
Can you make/receive calls? If so, data *should* just connect, assuming you're using relatively new stuff. A while ago you had to create an APN manually to connect, but that shouldn't be the case any more...

arrrghhh said:
Ok you're still not being clear.
I assume your issue is you can't connect to the internet via the cell radio? Thru Sprint's network instead of wifi?
Can you make/receive calls? If so, data *should* just connect, assuming you're using relatively new stuff. A while ago you had to create an APN manually to connect, but that shouldn't be the case any more...
Click to expand...
Click to collapse
i cant make phone calls. i can connect to wifi. any help would be app. thanks.

swaters3 said:
i cant make phone calls. i can connect to wifi. any help would be app. thanks.
Click to expand...
Click to collapse
Force cdma needs to =1 in your startup.txt CMDLINE section.

arrrghhh said:
Force cdma needs to =1 in your startup.txt CMDLINE section.
Click to expand...
Click to collapse
How do i access the force cdma. I use some sort of booting app that allows me to check or uncheck force cdma and to choose overclock speeds and update to newer versions. I dont see any place where i can access any stratup.txtThanks for your help. I would really love to try out android. Sprint wont let me update to any other smart phone but the tp2 (not that that is a bad thing) unless i upgrade my plan. I pay 5$ for unlimited data

swaters3 said:
How do i access the force cdma. I use some sort of booting app that allows me to check or uncheck force cdma and to choose overclock speeds and update to newer versions. I dont see any place where i can access any stratup.txtThanks for your help. I would really love to try out android. Sprint wont let me update to any other smart phone but the tp2 (not that that is a bad thing) unless i upgrade my plan. I pay 5$ for unlimited data
Click to expand...
Click to collapse
You don't want to know what I pay...
So I'm not sure how to explain this. Your startup.txt is a file you edit - where you run haret.exe from?
It sounds like you installed the cab, which unfortunately means you probably know nothing about how the system is put together, even at a high-level. Which is a shame...
With that said, assuming you're running v1.3 of the startup app, it should work fine. I cannot, and will not support that app. If you need support for that app, please go to sov's thread on the application.
If you want help on XDAndroid, then we can help... but we encourage you to search, read, research, search again, read some more, do a little more research, and then you may be ready to post. Maybe.

. .. fg
arrrghhh said:
You don't want to know what I pay...
So I'm not sure how to explain this. Your startup.txt is a file you edit - where you run haret.exe from?
It sounds like you installed the cab, which unfortunately means you probably know nothing about how the system is put together, even at a high-level. Which is a shame...
With that said, assuming you're running v1.3 of the startup app, it should work fine. I cannot, and will not support that app. If you need support for that app, please go to sov's thread on the application.
If you want help on XDAndroid, then we can help... but we encourage you to search, read, research, search again, read some more, do a little more research, and then you may be ready to post. Maybe.
Click to expand...
Click to collapse
can you direct me to where i can learn how to simply install android without the cab file. My research brought me originally to the cab file. I dint realize there was another way to install android.
Thanks for your help

swaters3 said:
. .. fg
can you direct me to where i can learn how to simply install android without the cab file. My research brought me originally to the cab file. I dint realize there was another way to install android.
Thanks for your help
Click to expand...
Click to collapse
There's CAB and RAR download's on Reef's download page...

arrrghhh said:
There's CAB and RAR download's on Reef's download page...
Click to expand...
Click to collapse
thanks for your help. I am in the middle of search and researching it.
Hopefuly ill get it to work.

What radio version do you have on your device?

gamescan said:
What radio version do you have on your device?
Click to expand...
Click to collapse
..
running stock sprint 6.5 update radio version 2.32.00wf. Please help me if you can im ready to give up. I am no expert just know how to download cab files and install them to my phone. Im very good at using the phone but not good at any type of programming. I do enjoy using all the great programs that have made the tp2 great and would love to use android without changing plans and moving from a resistive touc screen which i prefer.
thanks

[Q] Cyanogen to Stock

Hi there
Days ago I installed CyanogenMod and now I want to return to the stuck version, I downloaded the files SPH-L900_L900VPALJ1_L900VPALJ1_L900SPTALJ1.md5 and L900VPUBMK4_L900SPTBMK4_SPR.md5, I would like to know to to use this files, I supposed I can do it with ODIN.
My Baseband version is L900VPAMA7
Regards

The easiest way is http://forum.xda-developers.com/showthread.php?p=36388145
Sent from my SPH-L900 using Tapatalk

jrebo said:
The easiest way is http://forum.xda-developers.com/showthread.php?p=36388145
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
Awesome, will try it tonight.
Thank you

Better yet try rwilco12's repo to download the exe and run it. Its in the last couple of pages of above forun.i did that 3 days ago.
Sent from my SPH-L900 using xda app-developers app

hardrock121 said:
Better yet try rwilco12's repo to download the exe and run it. Its in the last couple of pages of above forun.i did that 3 days ago.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Even better

hardrock121 said:
Better yet try rwilco12's repo to download the exe and run it. Its in the last couple of pages of above forun.i did that 3 days ago.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
No instructions given, I supposed just need to run the setup and follow a wizard or something....Downloading right now

hardrock121 said:
Better yet try rwilco12's repo to download the exe and run it. Its in the last couple of pages of above forun.i did that 3 days ago.
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Not working under Windows 8.1

Nehemoth said:
Not working under Windows 8.1
Click to expand...
Click to collapse
Its a exe that extracts into a temp folder. Its nothing but ODIN app, once ODIN program starts, connect your phone and it should show up as yellow box on it and hit start , thats it. I did that on 8.1 so pretty sure you are missing something else. Are you sure your drivers are installed properly? On my laptop as soon as I put my phone in download mode, the drivers got installed automatically and the yellow box came up within no time.

hardrock121 said:
Its a exe that extracts into a temp folder. Its nothing but ODIN app, once ODIN program starts, connect your phone and it should show up as yellow box on it and hit start , thats it. I did that on 8.1 so pretty sure you are missing something else. Are you sure your drivers are installed properly? On my laptop as soon as I put my phone in download mode, the drivers got installed automatically and the yellow box came up within no time.
Click to expand...
Click to collapse
Indeed my friend I was doing something wrong.
I forget about the download mode, as soon as I did it, ODIN recognized the Device.
I hit start after that, a couple of minutes ago, but the program is not responding. There's CPU activity with the process so I'll wait a couple of minutes more but if nothing happens I supposed will try again.

Nehemoth said:
Indeed my friend I was doing something wrong.
I forget about the download mode, as soon as I did it, ODIN recognized the Device.
I hit start after that, a couple of minutes ago, but the program is not responding. There's CPU activity with the process so I'll wait a couple of minutes more but if nothing happens I supposed will try again.
Click to expand...
Click to collapse
I would just retry it on another machine jsut to be safe and chk the firewall connections on the pc to see f somethings blocking it if it didnt work. IT just work without issues if its recognized and yellow bar shows up

hardrock121 said:
I would just retry it on another machine jsut to be safe and chk the firewall connections on the pc to see f somethings blocking it if it didnt work. IT just work without issues if its recognized and yellow bar shows up
Click to expand...
Click to collapse
For some reason try it again and was taking to much time, copy it over to my new SSD and after a minutes worked just fine. I don't understand the issue as the other HDD is just fine, event is a brand new 7200RPM, but anyways after ran the software and after waiting some minutes the update went just ok. After that I used KIES to update to the newer version.
Thank you for the help

I accidentally hit update PRL in my flashed s3

I can get on internet but no mms or calls. Can I fix this thru my phone or do I have to use cdma tools (which I do not have on my laptop or really familiar with). I had it flashed at a local phone shop. I would greatly appreciate If you could point me in the direction to fix this rookie error
Thanks
Sent from my SPH-L710 using xda app-developers app

secsone said:
I can get on internet but no mms or calls. Can I fix this thru my phone or do I have to use cdma tools (which I do not have on my laptop or really familiar with). I had it flashed at a local phone shop. I would greatly appreciate If you could point me in the direction to fix this rookie error
Thanks
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I believe there might be a way to update the PRL via the phone, but I'm not positive and I've never done it.
I don't think it would be terribly difficult for you to update the PRL via dfs demo (I can give you a link to it)... all you do is find your SPC for your phone, and use that along with another password (there are 2 that I know of for Sprint phones) to unlock the phone for flashing in dfs demo, go to a specific tab, load PRL file from computer, and press the write button.

Yes that's sounds good, could you please post the link
Sent from my SPH-L710 using xda app-developers app

Questions and Help issues go in Q&A
Thread moved
Thanks
FNSM

secsone said:
I can get on internet but no mms or calls. Can I fix this thru my phone or do I have to use cdma tools (which I do not have on my laptop or really familiar with). I had it flashed at a local phone shop. I would greatly appreciate If you could point me in the direction to fix this rookie error
Thanks
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
settings, more, system update, update prl ??? not sure if it will work, but that's the location.

Try ##72786# in the dialer..your phone will reboot so don't panic. See if that works.
http://i.imgur.com/qrByUGN.jpg

JS_racer said:
settings, more, system update, update prl ??? not sure if it will work, but that's the location.
Click to expand...
Click to collapse
thats what i did to mess it up lol, thanks tho
bigpappags3 said:
Try ##72786# in the dialer..your phone will reboot so don't panic. See if that works.
it did not work, when i go to settings>about device>status> under username it doesnt have my number anymore i think thats what i have to fix.
Click to expand...
Click to collapse

so i decided to become a big boy and fix my own problem lol, so if anyone needs easy fix here is what i did.
1. I installed cdmaflashingtool and samsung drivers at cdmaflasher dot com/Downloads/index.php cant post urls yet
2. called cricket for MIN which they provided at no hassle
3. followed the instructions from flashingtools that they provide ( software is free, cause i basically needed a half flash )

[Q] sprint note 2 sph-l900 network info erased from phone..NO PHONE CALLS!!!HELP

NO matter what Rom I put on after this happens there is no network,,wireless works fine and so does the roms. Right after I rommed the ASOP latest nightly I called to make sure it was working fine and it was..Let ggogle put all my applications on and update them and went to bed,..When I woke up there was no network...So i used recovery and used 3 or 4 of my backups but none of them solved the network problem. I opened up backups to see if there was a file missing and I cant find any...Im willing to send some $ if someone can help me. By the way this has happened 3 times before but all sprint guys do is get me another phone and Im afraid thats going to be stopping soon..I just need to find out why this is happening so it doesnt happen again..thanks

Bad1nfluence said:
NO matter what Rom I put on after this happens there is no network,,wireless works fine and so does the roms. Right after I rommed the ASOP latest nightly I called to make sure it was working fine and it was..Let ggogle put all my applications on and update them and went to bed,..When I woke up there was no network...So i used recovery and used 3 or 4 of my backups but none of them solved the network problem. I opened up backups to see if there was a file missing and I cant find any...Im willing to send some $ if someone can help me. By the way this has happened 3 times before but all sprint guys do is get me another phone and Im afraid thats going to be stopping soon..I just need to find out why this is happening so it doesnt happen again..thanks
Click to expand...
Click to collapse
Sounds like a problem i had before. It is your baseband version. To fix you need to flash a stock/ish rom. In dialer do ##786# it will reset everything. Once you perform hands free activation you should be back up and running. After that make sure you flash a good mc2 baseband. After that you should be fine.
Quick question. You are on sprint and only flashing roms for the sprint phone? I have this happen when working on a couple ports from other note 2 variants.
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
Sounds like a problem i had before. It is your baseband version. To fix you need to flash a stock/ish rom. In dialer do ##786# it will reset everything. Once you perform hands free activation you should be back up and running. After that make sure you flash a good mc2 baseband. After that you should be fine.
Quick question. You are on sprint and only flashing roms for the sprint phone? I have this happen when working on a couple ports from other note 2 variants.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yes only l900 roms on my sprint phone..Last time it was macksrom 5.0 it happened on....I dont think it has anything to do with the flashing or which rom it is some application i have put on from the play store thats causing it..Im a noobie here so please bear with me..Last time this happened I flashed a stock l900 rom and did the reset thing you are talking about but it wouldnt go through..can you be more specific about the rom and what/how this baseband is installed..Ive beed using phils recovery but im familliar with the odin method..what line do you put it on the odin 3.07???

I will get on pc later and do you a full writeup with links.
Sent from my SPH-L900 using XDA Premium 4 mobile app
---------- Post added at 04:27 PM ---------- Previous post was at 04:08 PM ----------
Steps to hopefully fix your issues. Read through and download and copy all links to external sdcard before starting.
1. Perform a backup of everything (rom, internal sdcard)
2. Flash this twrp file from your current recovery http://goo.im/devs/OpenRecovery/t0ltespr/openrecovery-twrp-2.6.3.1-t0ltespr.img
3. Under reboot options choose reboot recovery
4. Now in twrp choose wipe/format and select data, system, cache, and internal scard (/data/media)
5. Go back and select the data wipe option then type yes
6. When done go to reboot menu and reboot recovery
7. Now install Billards back to stock mc2 http://forum.xda-developers.com/showthread.php?t=2086769 but do not reboot and do not wipe anything
8. Now install this to gain root (do not use twrp's root option) http://forum.xda-developers.com/attachment.php?attachmentid=1584076&d=1356201390
9. Now you can reboot. The red light will come on and phone will display weird stuff then reboot.
10. Now it will take some time to boot but you will be on stock mc2 with everything updated to latest mc2 setting.
11. Dial ##786# phone will reboot
12. Dial ##"your msl"# and change both number sets to 10 0's once done phone will reboot
13. Do Hands free activation. If that does not work dial *228 and let that run if phone does not reboot reboot it yourself.
Now if everything went according to plan you should now have full service. Since this updated everything to factory stock mc2 you will need to install a custom recovery again. Also the mc2 baseband provided with the rom has always been stable to for me. Since I am flashed to cricket I had to reflash the phone everytime this happened to me but thankfully I flash it myself so it was easy.

Bad1nfluence said:
NO matter what Rom I put on after this happens there is no network,,wireless works fine and so does the roms. Right after I rommed the ASOP latest nightly I called to make sure it was working fine and it was..Let ggogle put all my applications on and update them and went to bed,..When I woke up there was no network...So i used recovery and used 3 or 4 of my backups but none of them solved the network problem. I opened up backups to see if there was a file missing and I cant find any...Im willing to send some $ if someone can help me. By the way this has happened 3 times before but all sprint guys do is get me another phone and Im afraid thats going to be stopping soon..I just need to find out why this is happening so it doesnt happen again..thanks
Click to expand...
Click to collapse
If the method above doesn't work do you happen to have a backup of your nv items or your efs partitions?
Sent from my SPH-L900. Please hit the thanks button if I helped you out!

so I did everything you said got to the##786# amd did not reboot ..it said view and / on RTN page? I rebooted myself but thats where Im at. What is the next number is that my phone #? MSL? hope im still hangin in there....thanks

Bad1nfluence said:
so I did everything you said got to the##786# amd did not reboot ..it said view and / on RTN page? I rebooted myself but thats where Im at. What is the next number is that my phone #? MSL? hope im still hangin in there....thanks
Click to expand...
Click to collapse
IM sorry i dont know what the ?partions backup is...I did the nan, backup and the Note 2 toolbox backups does that help?

Bad1nfluence said:
IM sorry i dont know what the ?partions backup is...I did the nan, backup and the Note 2 toolbox backups does that help?
Click to expand...
Click to collapse
ok got my sprint msl number put it in and nothing happens?????? Sorry about before should have used the search engine,,,my bad..HELP
!!!

You did ##yourmsl# and changed both numbers to 0000000000? Then did hands-free action?
Sent from my SPH-L900 using XDA Premium 4 mobile app

OK:cyclops: did everything again just exactly as prescribed when i dialed the ##786# it does not reboot but go to a page that says rtn on top with 2 options view or reset...that's where I'm at ...I rebooted myself and did the ##157680# which is my msl # and it does nothing. So I pushed reset and a screen says enter msl # and i did ..nothing then I put in 0000000000 and nothing happens..this is where I'm at...thanks for your help I appreciate all

Try the hands free activation if that does not work try *228.
Sent from my SPH-L900 using XDA Premium 4 mobile app

Bad1nfluence said:
NO matter what Rom I put on after this happens there is no network,,wireless works fine and so does the roms. Right after I rommed the ASOP latest nightly I called to make sure it was working fine and it was..Let ggogle put all my applications on and update them and went to bed,..When I woke up there was no network...So i used recovery and used 3 or 4 of my backups but none of them solved the network problem. I opened up backups to see if there was a file missing and I cant find any...Im willing to send some $ if someone can help me. By the way this has happened 3 times before but all sprint guys do is get me another phone and Im afraid thats going to be stopping soon..I just need to find out why this is happening so it doesnt happen again..thanks
Click to expand...
Click to collapse
https://www.dropbox.com/s/40v32udrggnqm7z/SPR_GN2_Config.zip
This may help I believe it sets your partitions right. This is for 4.1.2 MC2.
ANDROID...A New Digital Revolution Of Incredible Developers

Its got to be something simple that Im doing wrong...the screen that it goes to says view and reset...when I push reset it wants the msl number but no matter what I put in it does nothing..no reboot or anything..please help..thanks

jlmancuso said:
Try the hands free activation if that does not work try *228.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
just says no mobile network when I put in *228...................... just did update over wi-fi now it doesnt work or stay on

Bad1nfluence said:
just says no mobile network when I put in *228...................... just did update over wi-fi now it doesnt work or stay on
Click to expand...
Click to collapse
Do have IMEI under about phone/status? Does it display your number or anything?
Sounds like you need to Odin flash a stock firmware with tz, param and modem..With a pit file so it flashes to the correct partition..
I'm on Verizon and this happened to me..lost everything under status..I flashed what I stated above and it fixed everything. .
If that doesn't work flash your KIES image and after re root and unlock your phone:thumbup:
Sent from my SCH-I605 using xda app-developers app

lacoursiere18 said:
Do have IMEI under about phone/status? Does it display your number or anything?
Sounds like you need to Odin flash a stock firmware with tz, param and modem..With a pit file so it flashes to the correct partition..
I'm on Verizon and this happened to me..lost everything under status..I flashed what I stated above and it fixed everything. .
If that doesn't work flash your KIES image and after re root and unlock your phone:thumbup:
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Network-unknown..... network type-unknown .....service state-out of sevice..... username-not available...... mobile network state-disconnected....my phone numer-unknown ..........prl version-unknown........... meid-unknown ...............iccid-unknown anyway what is tz, param..Ive went to stock and back 20 times know Im almost going to hook a capaciter up to it and give it a good shock so I can tack it back...again,,Im a my wits end ..How bout I send you 100 dollars and my phone you fix it and explain how exactly you did it so if it happens again I can bring it back like you did..im running out of time and options

Bad1nfluence said:
Network-unknown..... network type-unknown .....service state-out of sevice..... username-not available...... mobile network state-disconnected....my phone numer-unknown ..........prl version-unknown........... meid-unknown ...............iccid-unknown anyway what is tz, param..Ive went to stock and back 20 times know Im almost going to hook a capaciter up to it and give it a good shock so I can tack it back...again,,Im a my wits end ..How bout I send you 100 dollars and my phone you fix it and explain how exactly you did it so if it happens again I can bring it back like you did..im running out of time and options
Click to expand...
Click to collapse
Go for it.. PM me..I have another solution for you as well
Sent from my SCH-I605 using xda app-developers app

Bad1nfluence said:
Its got to be something simple that Im doing wrong...the screen that it goes to says view and reset...when I push reset it wants the msl number but no matter what I put in it does nothing..no reboot or anything..please help..thanks
Click to expand...
Click to collapse
Did you try and flash the zip I posted? It sets your carrier partitions! It is for the Sprint Galaxy Note 2...I've used it...it works. Just saying it couldn't hurt to try.
ANDROID...A New Digital Revolution Of Incredible Developers

What about flashing the mk4 rom of your choice, then flash the newest mk4 modem..? I have the file if needed. Works great!

rosystreasures said:
What about flashing the mk4 rom of your choice, then flash the newest mk4 modem..? I have the file if needed. Works great!
Click to expand...
Click to collapse
the phone is only 2 week old with the latest kit-kat installed from them..I think I read somewhere that if you go backwards to and older rom like mk2 it screws the phone up because of the knox??? anyway yes I flashed it but honestly Ive done so many things ,so many times,,,every modem, mk2, mk4, rooted , unrooted , different recovery...I even got the note 2 toolkit updated donated version...nothing is working,perhaps the order in which i do these things may be off but when the phone is supposed to reboot it doesnt , when its supposed to show a number it doesnt..actually the more I do to it the worse it gets..It will go into recovery and odin mode, but some of the things that were sure fire arent even working...Yes as long as still have the phone i would try it can you send me a link for those files..thanks