Develop Bugs

OXA S8530XXJKA (DBT) for S8530

Can someone give me a link to OXA S8530XXJKA (DBT) full firmware for S8530 Wave 2...
I want to flash my phone and try to update with KIES....
thanks in advance....

theconqueror said:
Can someone give me a link to OXA S8530XXJKA (DBT) full firmware for S8530 Wave 2...
I want to flash my phone and try to update with KIES....
thanks in advance....
Click to expand...
Click to collapse
Did you try http://hotfile.com/dl/99644499/83fa601/S8530XXJKA.rar.html ? I'm downloading it too and will report back how it works (want to switch back to 1.2 so that I can continue developing under 1.x now that it has turned out there is no way of installing Bada 2.0 apps using current unofficial firmwares)
There's also a list of these firmwares at http://www.worcesterdwi.com/thread-145-1-1.html but they're all hacked / enhanced. I'll test them too.

Sucseed....
I downloaded the firmware from Samfirmware....
I flashed my phone....
After I connect it to KIES.....
KIES updated my phone to the latest version....
S8530XXJKA CSC_S8530_Open_Europe_Common_OXA_XXJK7
Now the firmware is
S8530XXKF1/S8530OXAKD7(DBT)
try it but change the product code to.... DBT

Menneisyys said:
Did you try http://hotfile.com/dl/99644499/83fa601/S8530XXJKA.rar.html ? I'm downloading it too and will report back how it works
Click to expand...
Click to collapse
Downloaded and have been trying to flash, back from XPKH3. So far, without any success.
- If I try to flash with the bundled MultiLoader version 2.62, it reports and error right at the beginning, right after (successfully) transferring the bootloader, upon trying to delete the old bootloader.
- If I try to flash with the latest (2.65) MultiLoader version, everything seems to be all right; however, after the flashing and restarting the phone, what I get is the usual connect screen with the exclamation mark. From there, I can only switch to download mode again, but nothing else.
Flashing back to the latest 2.0 XPKH3 (with 2.65, of course) always works.
I'll soon try flashing with 2.62 without overwriting the bootloader (that is, removing the checkmark from the first checkbox) to see what happens as it's at erasing the bootloader that 2.62 fails.

try this...
Download the firmware from samfirmware...
I can not give a external link to you because I'm a newbie here and I'm not allowed to do it.
I think the firmware in Samfirmware is full and without problem....the multiloader is in the file...V5.62
http://forum.xda-developers.com/showthread.php?t=1068735
is the real thread you gave me the link...do not forget to change the product code to DBT because I tried first XEU and KIES refused to update....
It should work properly....when I flashed just click ''full download and Master Rom" "LSI was already clicked by default"......
Good luck....

theconqueror said:
Download the firmware from samfirmware...
I can not give a external link to you because I'm a newbie here and I'm not allowed to do it.
I think the firmware in Samfirmware is full and without problem....the multiloader is in the file...V5.62
http://forum.xda-developers.com/showthread.php?t=1068735
is the real thread you gave me the link...do not forget to change the product code to DBT because I tried first XEU and KIES refused to update....
It should work properly....when I flashed just click ''full download and Master Rom" "LSI was already clicked by default"......
Good luck....
Click to expand...
Click to collapse
Thanks... you meant http://www.samfirmware.com/WEBPROTECT-s8530.htm . Just giving a try to the version there; hope I'll have better luck

theconqueror said:
Download the firmware from samfirmware...
I can not give a external link to you because I'm a newbie here and I'm not allowed to do it.
I think the firmware in Samfirmware is full and without problem....the multiloader is in the file...V5.62
http://forum.xda-developers.com/showthread.php?t=1068735
is the real thread you gave me the link...do not forget to change the product code to DBT because I tried first XEU and KIES refused to update....
It should work properly....when I flashed just click ''full download and Master Rom" "LSI was already clicked by default"......
Good luck....
Click to expand...
Click to collapse
Thanks again. I've found out what I've done wrong: I've forgotten to check in the "Boot Change" (first) checkbox. When checking it in, with all the firmware versions (S8530XXJKA.rar I've linked to above; GT-S8530_XEF_S8530XXKF1_S8530OXAKD7.rar linked from the SamFirmware repo as the latest (June 2011) 1.2 firmware; even hacked ones with call recording, that is, S8530XXJKA_FULL_Custom_SHP_CR_1.0b_sYCO.rar ) I've thrown it at, it worked just fine.
I've used ML 2.65 for flashing all the time. Haven't tested 2.62 this time.

Good news...
Happy for you...

Hello all,
links in previous posts are dead.
Can any of you post this file (previous 1.x version of bada, europeean or french XEF release).
Purpose is also downgrading and upgrade tests via Kies.
Best regards,
Fred
Hi ! I finally find a ROM on the internet.
Thanks

S7250 Wave M bada 2.0 Firmware

Seems online...
Someone found an Link.
Thanx.
Best Regards

http://hotfile.com/dl/135201469/4dcef4d/S7250DJPKJ3_S7250DOJPKJ1_OJP.rar.html

this firmware is very small in size (182.5mb) don't u think

S7250DJPKK1_S7250DOJPKK1
Available.
Best Regards

It seems soon or yet available on market...
Maybe if official available somewhere, someone could please post Firmwareversion. So we could check FUS for updates.
Thanx in advance.
Best Regards

Today found in market and short checked...
Retail Version...
S7250XXKJ7
S7250OXAKJ7
But I can't find on FUS...
Best Regards
Edit 1.
Found post about Kies update to S7250XXKK1...
But again no Product Code yet...
Edit 2.
Product Code: GT-S7250MSADBT
Latest firmware: S7250XXKK1/S7250OXAKK1
Modified: 30.11.2011 16:11:19
Filename: GT-S7250_DBT_1_20111130161113.enc3.zip
But I can't download yet...
Edit 3.
I have it now, but still enc3 no decrypt Algo known...

h t t p:// img14.imageshack.us /img14/1694/s7250.png
Cant do anythin with the handset until there is a firmware update.
-which means bugs as im running a testing firmware
-cannot access the apps market and download
-etc

Hello, if I'm right. I can see XXKFE/OXAKFE on Screenshot.
Please be carefully. Sometime Prototypes not the same like Retail...
to prevent damage...
Other problem, also retail is new... nowhwere read about successfully update...
See here:
http://www.sammobile.com/forum/showthread.php?t=1844&page=3&p=15695#post15695
Wait... if Service manual is availabe, we can see what to choose in Multiloader...
Best Regards

Please Help Firmware

Good afternoon! I have a problem with my phone. I'm from Argentina and I am new to this. the problem I have is I can not move from Bada bada 2.0 to 1.2. The problem is that I have no signal bada 2.0. but when wanting to pass me da bada 1.2 ERROR ERASE: in BOOTLOADER, APPS - Rsrc1 and CSC. attempt to install over 10 firmware and could not always gives me this error. please if anyone knows help me thank you with all my heart! thank you! Greetings from Argentina!

Hello,
First of all check that if your phone is locked to your network Because if your phone is locked to your operator than you will not be able to use open region firmwares and you will not get any signal.So check and then update here so we can help you better.

If you bought your phone from Argentina, most likely it is s8500L.
So may be the problem is in the proper firmware.
If I'm right, you can get the right one from sammobile website:
http://www.sammobile.com/firmware/?page=3&t=1&o=2&m=GT-S8500L&r=6#regiona
Best Regards,
Nasko

The phone is released. I can put any firmware 1.2 and it takes me the signal. the problem is now 2.0, and bada got no signal I take what I want to do is re-bada 1.2 but will not let me, I get ERROR ERASE at the boot, apps, Rsrc1 and FOTA. and will not let me install any firmware Argentina (L) because it gives me this error. and more than 10 firmwares probe and 3 different computers and I get the same error .. you would know that this error or to fix it?. Thank you very much for your help!

Multiloader Version?
5.67 ?
Windows Version?
XP?
Win 7 ?
32 or 64...
Help us what you use, then we can maybe help you better.
Best Regards

Adfree good afternoon! thank you very much for your interest! I'm very glad that someone like you care and that help you much apresio his great knowledge.
and with this probe to flash with
Multiloader Version: 5.65 / 5.62
Windows Version: XP (SP1, SP2 and SP3) / Windows 7.
Since I tested with it and always says the same ... the only firmware that lets me flash is the bada 2.0 of "Fosamobi2012_S8500" of badadownload.
With this firmware does not take me CLEAR signal with the company.
I would again bada 1.2 but I get ERROR ERASE and will not let me go more. You've tried many firmwares and I do not install dea or FULL mode or in LOW mode.
AdFree please help! I trust you! From already thank you very much for your interest!
Sorry for my bad English, but I'm using a web translator.

elkpojlb said:
Adfree good afternoon! thank you very much for your interest! I'm very glad that someone like you care and that help you much apresio his great knowledge.
and with this probe to flash with
Multiloader Version: 5.65 / 5.62
Windows Version: XP (SP1, SP2 and SP3) / Windows 7.
Since I tested with it and always says the same ... the only firmware that lets me flash is the bada 2.0 of "Fosamobi2012_S8500" of badadownload.
With this firmware does not take me CLEAR signal with the company.
I would again bada 1.2 but I get ERROR ERASE and will not let me go more. You've tried many firmwares and I do not install dea or FULL mode or in LOW mode.
AdFree please help! I trust you! From already thank you very much for your interest!
Sorry for my bad English, but I'm using a web translator.
Click to expand...
Click to collapse
Try one of the indian firmware its a old firmware try ddjk3 from asian version. Use v5.65 of multiloader. And after a successfull flash just flash again the version u want. Please check boot change and full download. Don not tick master rom. See if this helps you this is tested by me as once the same problem happened to me.
Thanx

Thank you very much for your help but I can not fix the problem. try and feel the same. I can not go to 1.2 or 1.0 bada no longer do: (

I forgot to tell you that when I get the ERROR ERASE, cel look at the screen and says:
! ABNORMAL SW DETECTED!
UPGRADE ONLY!. "
That's a must or I have to do to fix it?.

Is it S8530 ?
if so - you can try this firmware
S8530XXJL2 ## 1.2 2010 December S8530OXAJK7 Open Europe Download
it's old one but great ... she helped me alot
if it still doesn't help - flash only the boot files - separately
let the device do restart and only reEnter download mode
and flash the other files ....
P.s very important - full download & LIS in multiloader
try to use ver 5.65 not the 5.67
make sure that your pc is not busy and that you have sufficient battery
Good Luck

This is S8500. and is loaded to the maximum (which is left over when flash bada 2.0) but I can not flash bada 1.2 and 1.0.
You've tried all the files separately by a full flash and low but the same thing. I always throw the same error. Multiolader already tested with 6.62 and 5.65 and the pc without aplicasiones open.
Probe with more than 10 firmwares and none let me.

adfree a question. is possible to merge the bada ams.bin 1.2 with 2.0?
Since doing that I think I may have a sign. I saw many users in Argentina had the problem of not having signal bada 2.0.
They are very different both AMS.bin?. merge is too complicated to operate the signal?
Thank you very much from now! Greetings friend!

I'm using only Multiloader 5.67 if I play with bada 2.0...
XP 32 bit
Also for downgrade from 2.0 to 1.x I use only 5.67 to prevent "funny" phenomenons...
Best Regards

I use multiloader v5.65 and it works flawlessly when i do upgrading or downgrading on bada 2.0. I am having windows 7 32 x86-32 bits.
So adfree i think its not mandatory to use only v5.67 infact v5.65 works better and error free. But may be different person have different choices

I had simmilar isue (exept signal problem) while tried to downgrade S8500OXAKK7 2.0 to original Croatian 1.2 S8500XXKF3_S8500OXFKA1_TRA.
1st I had to flash Arabic S8500JPJG2. Worked fine for me! All done with MultiLoader v.5.65

Maybe ...
Try to flash to original beta rom of bada 2.0
but an earlier ver like :
S8500XPKH1 ## 2.0 2011 August S8500OXAKH1 Open Europe
and than try to downgrade
hope it will work

Anycall Wave II M210He

Hello,
I have flashed my M210 to wave II firmware not it works untill the phone goes to stand by mode, once it is into standby mode you can't unlock or wake it up from the dark screen..
am soo screwed,
Please help.
I have flashed many firmwares, the one that comes with Anycall M210 too.. yet the same problem.
any help???

Try official firmware : http://www.hotfile.com/dl/149639410/c232cb0/M210SKRLC1_M210SSKTLC1_SKT.zip.html

I flashed this firmwhere but didn't help, the problem remain the same

What you did...please tell me step by step
Because it is official Bada 2.0 firmware for M210S,there wouldn't be a problem

Firstly, i downloaded both the firmware and the downaloder 6.67
Flashed by selected the files appropriatly
all files successfully flashed successfully except the boot files...
i have to change them with other bootfiles from wave 2 firmware and it was flashed then
but after still is the same problem

it just doean't wake up after it goes into sleep mode ....
even though i have flashed the official firmware yet no hope

anybody ?

all files successfully flashed successfully except the boot files...
i have to change them with other bootfiles from wave 2 firmware and it was flashed then
but after still is the same problem
Click to expand...
Click to collapse
M210S is different as S8530...
TDMB...
If this is no Software feature so maybe few Chips different... maybe little tiny differences in Hardware...
I think you need back BOOTFILES from M210S...
Best Regards

can anyone provide me with a proper bootfiles ?

Nimra Khan said:
can anyone provide me with a proper bootfiles ?
Click to expand...
Click to collapse
Which i gave firmware it is full firmware and bootfiles is in inside

Sometimes Bootloader change is not more easy possible... during Security...
So it could be IMPOSSIBLE with Multiloader alone to jump back to Original M210S Boot...
One Hardcore way would be repair with JTAG...
Best Regards

adfree said:
Sometimes Bootloader change is not more easy possible... during Security...
So it could be IMPOSSIBLE with Multiloader alone to jump back to Original M210S Boot...
One Hardcore way would be repair with JTAG...
Best Regards
Click to expand...
Click to collapse
Yes its not happening with multi loader, tried almost a dozelian times.
I don't know anything about JTAG

http://forum.xda-developers.com/showpost.php?p=13582911&postcount=13
RIFF Box means for instance JTAG... solder wires etc...
Sorry, no other working solution known...
Best Regards

Other direction...
I have S8530 device... to do stupid tests.
I wish I could use M210S Firmware...
Nope... not possible...
1.
Check Screenshot from ML...
Many addresses DIFFERENT... means partition table is not 1:1...
2.
I have tried several combinations with Boot change... but not possible...
dbl Error...
Best Regards
Edit.
Short tested with XPKD6 Boot...
Same result...
Soon I will try bada 1.2 Boot... maybe then more luck to change Boot to M210S...
Btw... M210S Firmware bada 1.x with Bootfiles available somewhere?
Edit 2.
Flashed XXJK2 Boot (bada 1.x)... same result...
It seems not possible with Multiloader to jump back to M210S Bootfiles... or to flash S8530 with M210S Boot...

ONLY as info yet...
Maybe this year chance to fix this...
1.
I have realized during mistake...
I have forgotten to copy dbl.mbn into folder...
That Boot Change also work only with 1 file...
boot_loader.mbn
2.
I have found way to disable RSA 1024 check of Bootloader... Maybe this makes easier to flash back M210S Boot...
But need some time for tests and more investigation...
Best Regards

I have an idea... test later...
In boot_loader.mbn of M210S Firmware is SHW-M210S instead GT-S8530 String...
Warning! Don't try it self. You could brick your handset.
Best Regards
Edit 1.
Summary...
dbl.mbn is 1:1 same file like in S8530 DBT...
Edit 2.
Progress...
Bypassed apps_compressed.bin...
My fault... it seems size check... in last 1024 Byte aka end.bin...
Now I have taken from bigger file XPKD6...
Now I need to wait for *.app and CSC finish... then I'll post result...
Edit 3.
Code:
Download Start Ch[0]
FOTA 1817.7KB OK[0.9s]
Amss 13276.7KB OK[5.2s]
Apps 27000.8KB OK[12.7s]
Rsrc1 38797.3KB OK[14.8s]
Rsrc2 2987.3KB OK[1.4s]
FFS 191692.8KB OK[340.4s]
SHPAPP 191152.1KB OK[266.4s]
CSC 58662.9KB OK[106.7s]

-deleted -
Noobish question was here

did you flashed wave 3 firm. to wave 2? are your device can boot?
Click to expand...
Click to collapse
Wave 3 aka S8600 is COMPLETE different.
S8530 and M210S are similar... minor differences in Hardware...
S8500 is in this "Family Group"...
Simple check only folder BOOTFILES...
2 files for S8500,S8530,M210S:
Code:
boot_loader.mbn
dbl.mbn
Now look into S8600 XXKJC for instance has all files...
I can see 4 files, 2 more then the other group has...
Best Regards

adfree said:
Edit 2.
Progress...
Bypassed apps_compressed.bin...
My fault... it seems size check... in last 1024 Byte aka end.bin...
Now I have taken from bigger file XPKD6...
Now I need to wait for *.app and CSC finish... then I'll post result...
Edit 3.
Code:
Download Start Ch[0]
FOTA 1817.7KB OK[0.9s]
Amss 13276.7KB OK[5.2s]
Apps 27000.8KB OK[12.7s]
Rsrc1 38797.3KB OK[14.8s]
Rsrc2 2987.3KB OK[1.4s]
FFS 191692.8KB OK[340.4s]
SHPAPP 191152.1KB OK[266.4s]
CSC 58662.9KB OK[106.7s]
Click to expand...
Click to collapse
Bypassed apps_compressed.bin...
How did you do ?
BTW phone boot now ?
Nice progress

BTW phone boot now ?
Click to expand...
Click to collapse
No.
Maybe my mistake is end.bin from XPKD6 for apps_compressed.bin...
Also I have removed some Security with TriX...
http://forum.xda-developers.com/showpost.php?p=37540321&postcount=263
S8530 seems not accept or load apps_compressed.bin from M210S ...
Tests with Debug high in RC2 file no Bluescreen...
Bootloader I have taken from XXLA1 DBT...
Maybe I should try also Boot from XPKD6...
Will make more tests next days...
Best Regards
Edit 1.
apps_compressed.bin from KRLC1 is exact:
Code:
27001856 Byte ([B]25,8 MB[/B])
XPKD6 was bigger... but maybe not good for XXLA1 Boot...
Will check now other files for best end.bin...
Edit 2.
I have forgotten KRLF1 from M210S, but same result...
---------- Post added at 05:16 AM ---------- Previous post was at 04:19 AM ----------
Little progress with XPKD6 Boot...
Now CSC is not possible in Multioloader...
But I see progress bar moving in RC2 like on S8000 Jet...
I will create CSC with Wave_Remaker... and check again RC2 with Debug Level High...
Later more.
Best Regards
Edit 3.
Compared short *.so files... seems no Radio in M210S ?
Many *.so files more or different... Maybe interesting for study...

bricked wave ????

hello,
i know that this isn't the right place for my question but i didn't find a forum dedicated to the same of my problem.
so my phone samsung wave s8500 running bada got the download mode in the boot.
when i on my phone i get just the download mode even if i did not press the combo keys power vol down camera buttons. i got always on the download mode and my phone dont want to start
i triyed to unbrik him using multiloaders v5.65 and upload all required fils succefully but always the same problem
so ??? do think that a hardware problem ??
please help me it's urgent
thanks in advance

ANY HELP???

Multiloader shows Errors?
Which Firmware you have tried?
XXLA1 for instance... bada 2...
Status before?
Working?
Or you bought in used condition... unknown status?
In other words...
More details please.
Attach Screenshot from Multiloader for instance...
Btw.
"Latest" Multiloader is 5.67
Best Regards

thanks for the best reply friend
firmware : S8500XPKG5 bada. downloaded from multiloader via download mode
status before : work normal
it was normal, i don't know what happened

when i uploaded the fota + boot files via this topic, i got an orange screen, then a green message appeared ' upload data to pc '
what can i do ?

hello echopros
if you have upload data to pc you wave is in download mode so you can upload the firmware with multiloader
( sometime when you change from bada1 to bada 2 the upload stop after the bootfile and you have this message )

1.
XPKG5 is OLDEST leaked bada 2 Firmware...
Google for XXLA1 DBT for instance...
2.
upload data to pc
Click to expand...
Click to collapse
This is NOT Download Mode... only as info...
http://forum.xda-developers.com/showthread.php?t=1176189
Download XXLA1
Then use Multiloader 5.67
ALL files including BOOTfiles...
Best Regards
---------- Post added at 04:11 PM ---------- Previous post was at 03:46 PM ----------
Here is good source for S8500 Firmware:
http://netfolder.in/folder.php?folder_id=M4w7E4h
Try S8500XXLA1_v2.0_DBT.zip
http://netload.in/datei5Usrafz3Cv.htm
Then feedback please...
Best Regards

yakapa40 said:
hello echopros
if you have upload data to pc you wave is in download mode so you can upload the firmware with multiloader
( sometime when you change from bada1 to bada 2 the upload stop after the bootfile and you have this message )
Click to expand...
Click to collapse
i know and i uploaded all needed files but no success i'll try what Adfree said and i'll told you the results
thanks all for replies

adfree said:
1.
XPKG5 is OLDEST leaked bada 2 Firmware...
Google for XXLA1 DBT for instance...
2.
This is NOT Download Mode... only as info...
http://forum.xda-developers.com/showthread.php?t=1176189
Download XXLA1
Then use Multiloader 5.67
ALL files including BOOTfiles...
Best Regards
---------- Post added at 04:11 PM ---------- Previous post was at 03:46 PM ----------
Here is good source for S8500 Firmware:
http://netfolder.in/folder.php?folder_id=M4w7E4h
Try S8500XXLA1_v2.0_DBT.zip
http://netload.in/datei5Usrafz3Cv.htm
Then feedback please...
Best Regards
Click to expand...
Click to collapse
i know that upload data to pc massage not download mode
but i told you that when i was in download mode and have uploaded just boot files + fota from the link that in the forum i got this message

when i upload all files check LSI . boot change . full download . master ROM
message appeared after download " All files complete "
the probleme
my phone didn't restart after download
and when i unplug the battery and plug it again and power the phone always the same problem i got in download mode again

Only to be sure.
Check this Picture:
http://forum.xda-developers.com/showpost.php?p=44783328&postcount=4
Its from S8530... but...
S8500 looks similar.
All files complete ? Look on right site...
Normally you have nothing to set... accept Full Download to choose all files including Boot...
If all files from XXLA1, then ONLY flash this RC2:
http://forum.xda-developers.com/showpost.php?p=44791652&postcount=9
Now maybe more infos available. Like this.
http://forum.xda-developers.com/showpost.php?p=44803131&postcount=10
See Blue Screen Picture...
Btw.
Your Windows Version is what?
Win 7 64 bit ? ?
Best Regards

I did the same job exept I choose Master download. Ok I will try againe like the picture. Thanks adfree for your help. See you

adfree said:
Only to be sure.
Check this Picture:
http://forum.xda-developers.com/showpost.php?p=44783328&postcount=4
Its from S8530... but...
S8500 looks similar.
All files complete ? Look on right site...
Normally you have nothing to set... accept Full Download to choose all files including Boot...
If all files from XXLA1, then ONLY flash this RC2:
http://forum.xda-developers.com/showpost.php?p=44791652&postcount=9
Now maybe more infos available. Like this.
http://forum.xda-developers.com/showpost.php?p=44803131&postcount=10
See Blue Screen Picture...
Btw.
Your Windows Version is what?
Win 7 64 bit ? ?
Best Regards
Click to expand...
Click to collapse
My windows is 8
Shall I do it in 7 or XP ?

I have NO Win 8 experiences...
Not tested.
Also never tested on 64 bit System...
32 bit XP 10000000 % working for me. :angel:
Before you try on other Windows...
Check RC2 file ONLY to flash.
http://forum.xda-developers.com/showpost.php?p=45210653&postcount=11
Maybe S8500 shows Bluescreen.
Maybe Memory damaged like this:
http://forum.xda-developers.com/showthread.php?t=1398528
Blue Screen can show hints like this:
Code:
Type : Unofficial Version
Number : 1243
Builder : superuser
Host : S1-AGENT08
Date : 2012/01/05
Time : 19:21:46
Size : 42730876 bytes
CheckSum : 0xf4e364eb
View :
S/W version:S8500+XX+LA1
Modem:Q6270B-KPRBL-1.5.45T
SHP:VPP R5 2.1.1
Build Host:S1-AGENT08
BuildAt:2012/01/05 19:21:46
App Debug Level : 0
Data Abort!Page Translation Fa
ult for (0x6c92d214) Read Acce
ss Detection
<Callstack information>
PC = 404327A6 _printf_str
LR = 404317F1 __printf
<Mocha Task Callstack>
__printf
_printf_char_common
_snprintf
_MemGetCurrentlyAllocatedMemLi
stEx
OemBmShutdown
__WmEventHandlerProc
__WmProcessEventInternal
WmProcessEvent
__BootTimerCallback
__WmProcessTimerEvent
__WmProcessEventInternal
WmMainLoop
MochaTask
ALL HW Information:
HW VERSION : S8500_REV07
IMEI VERSION : Not Active
Best Regards

yes you'r right MAN
the windows 8 does not work with the flash correctly
it's ok now the problem has been solved thank you very very much adfree
big thanks
so happy now
this is the best forum
i love it

hello friends
after download and all done with success some pads does not work correctly for example
clicking on call pad = going to camera
on midium pad : a message appeared ''captured'' then the screen freeze up ??
lock pad does not work anymore

Can you check label under battery...
Is this Retail device?
Or looks like this...
http://forum.xda-developers.com/showpost.php?p=43475042&postcount=11
Best Regards

adfree said:
Can you check label under battery...
Is this Retail device?
Or looks like this...
http://forum.xda-developers.com/showpost.php?p=43475042&postcount=11
Best Regards
Click to expand...
Click to collapse
the same phone and same details

i changed the rom by an other from a website http://tizenhub.com/2012/01/official-bada-2-0-firmware-s8500xxla1.html
then when all complete the keypad camera work but as volume, and the lock pad as camera ????¿¿¿¿ lol what happened to my mobile hehhe

the same phone and same details
Click to expand...
Click to collapse
You mean you have an NOT for Sale handset?
An prototype S8500 ?
Best Regards