Good afternoon! I have a problem with my phone. I'm from Argentina and I am new to this. the problem I have is I can not move from Bada bada 2.0 to 1.2. The problem is that I have no signal bada 2.0. but when wanting to pass me da bada 1.2 ERROR ERASE: in BOOTLOADER, APPS - Rsrc1 and CSC. attempt to install over 10 firmware and could not always gives me this error. please if anyone knows help me thank you with all my heart! thank you! Greetings from Argentina!
Hello,
First of all check that if your phone is locked to your network Because if your phone is locked to your operator than you will not be able to use open region firmwares and you will not get any signal.So check and then update here so we can help you better.
If you bought your phone from Argentina, most likely it is s8500L.
So may be the problem is in the proper firmware.
If I'm right, you can get the right one from sammobile website:
http://www.sammobile.com/firmware/?page=3&t=1&o=2&m=GT-S8500L&r=6#regiona
Best Regards,
Nasko
The phone is released. I can put any firmware 1.2 and it takes me the signal. the problem is now 2.0, and bada got no signal I take what I want to do is re-bada 1.2 but will not let me, I get ERROR ERASE at the boot, apps, Rsrc1 and FOTA. and will not let me install any firmware Argentina (L) because it gives me this error. and more than 10 firmwares probe and 3 different computers and I get the same error .. you would know that this error or to fix it?. Thank you very much for your help!
Multiloader Version?
5.67 ?
Windows Version?
XP?
Win 7 ?
32 or 64...
Help us what you use, then we can maybe help you better.
Best Regards
Adfree good afternoon! thank you very much for your interest! I'm very glad that someone like you care and that help you much apresio his great knowledge.
and with this probe to flash with
Multiloader Version: 5.65 / 5.62
Windows Version: XP (SP1, SP2 and SP3) / Windows 7.
Since I tested with it and always says the same ... the only firmware that lets me flash is the bada 2.0 of "Fosamobi2012_S8500" of badadownload.
With this firmware does not take me CLEAR signal with the company.
I would again bada 1.2 but I get ERROR ERASE and will not let me go more. You've tried many firmwares and I do not install dea or FULL mode or in LOW mode.
AdFree please help! I trust you! From already thank you very much for your interest!
Sorry for my bad English, but I'm using a web translator.
elkpojlb said:
Adfree good afternoon! thank you very much for your interest! I'm very glad that someone like you care and that help you much apresio his great knowledge.
and with this probe to flash with
Multiloader Version: 5.65 / 5.62
Windows Version: XP (SP1, SP2 and SP3) / Windows 7.
Since I tested with it and always says the same ... the only firmware that lets me flash is the bada 2.0 of "Fosamobi2012_S8500" of badadownload.
With this firmware does not take me CLEAR signal with the company.
I would again bada 1.2 but I get ERROR ERASE and will not let me go more. You've tried many firmwares and I do not install dea or FULL mode or in LOW mode.
AdFree please help! I trust you! From already thank you very much for your interest!
Sorry for my bad English, but I'm using a web translator.
Click to expand...
Click to collapse
Try one of the indian firmware its a old firmware try ddjk3 from asian version. Use v5.65 of multiloader. And after a successfull flash just flash again the version u want. Please check boot change and full download. Don not tick master rom. See if this helps you this is tested by me as once the same problem happened to me.
Thanx
Thank you very much for your help but I can not fix the problem. try and feel the same. I can not go to 1.2 or 1.0 bada no longer do: (
I forgot to tell you that when I get the ERROR ERASE, cel look at the screen and says:
! ABNORMAL SW DETECTED!
UPGRADE ONLY!. "
That's a must or I have to do to fix it?.
Is it S8530 ?
if so - you can try this firmware
S8530XXJL2 ## 1.2 2010 December S8530OXAJK7 Open Europe Download
it's old one but great ... she helped me alot
if it still doesn't help - flash only the boot files - separately
let the device do restart and only reEnter download mode
and flash the other files ....
P.s very important - full download & LIS in multiloader
try to use ver 5.65 not the 5.67
make sure that your pc is not busy and that you have sufficient battery
Good Luck
This is S8500. and is loaded to the maximum (which is left over when flash bada 2.0) but I can not flash bada 1.2 and 1.0.
You've tried all the files separately by a full flash and low but the same thing. I always throw the same error. Multiolader already tested with 6.62 and 5.65 and the pc without aplicasiones open.
Probe with more than 10 firmwares and none let me.
adfree a question. is possible to merge the bada ams.bin 1.2 with 2.0?
Since doing that I think I may have a sign. I saw many users in Argentina had the problem of not having signal bada 2.0.
They are very different both AMS.bin?. merge is too complicated to operate the signal?
Thank you very much from now! Greetings friend!
I'm using only Multiloader 5.67 if I play with bada 2.0...
XP 32 bit
Also for downgrade from 2.0 to 1.x I use only 5.67 to prevent "funny" phenomenons...
Best Regards
I use multiloader v5.65 and it works flawlessly when i do upgrading or downgrading on bada 2.0. I am having windows 7 32 x86-32 bits.
So adfree i think its not mandatory to use only v5.67 infact v5.65 works better and error free. But may be different person have different choices
I had simmilar isue (exept signal problem) while tried to downgrade S8500OXAKK7 2.0 to original Croatian 1.2 S8500XXKF3_S8500OXFKA1_TRA.
1st I had to flash Arabic S8500JPJG2. Worked fine for me! All done with MultiLoader v.5.65
Maybe ...
Try to flash to original beta rom of bada 2.0
but an earlier ver like :
S8500XPKH1 ## 2.0 2011 August S8500OXAKH1 Open Europe
and than try to downgrade
hope it will work
Related
Dear Friends,
I was flashing ROM to my hx4700 (upgrade from the first version of MW 5 to the second official version) when due to power failure my computer switched off and the connection with HP was lost. It was exactly on 62% and now I have a BIG problem..
When I am trying to flash the update again, it says "Incorrect Language. Update cannot continue". It shows ROM version as 4.xx and language as "unknown" (upgrade is for version 2.01.05).
When I try the previous version it shows model: unknown, ROM: unknown, and language: English. Update to version 2.00.39. The update starts.. from 0.1% to 1% (each 0.1% in abt. 15 sec) but then stops.. It shows Error 606 - timeout.
What can I do?? Can I try flash a new ROM from SD card? And if yes, how to do it??
HELP ME PLEASE !!
EdJessops said:
Dear Friends,
I was flashing ROM to my hx4700 (upgrade from the first version of MW 5 to the second official version) when due to power failure my computer switched off and the connection with HP was lost. It was exactly on 62% and now I have a BIG problem..
When I am trying to flash the update again, it says "Incorrect Language. Update cannot continue". It shows ROM version as 4.xx and language as "unknown" (upgrade is for version 2.01.05).
When I try the previous version it shows model: unknown, ROM: unknown, and language: English. Update to version 2.00.39. The update starts.. from 0.1% to 1% (each 0.1% in abt. 15 sec) but then stops.. It shows Error 606 - timeout.
What can I do?? Can I try flash a new ROM from SD card? And if yes, how to do it??
HELP ME PLEASE !!
Click to expand...
Click to collapse
No Problem. Your 4700 will be fine. Go to http://forum.brighthand.com/showthread.php?t=246529 and download the bootloader from Chrismrulz (click on his signature). Use it to flash any ROM you like. This bootloader works like a charm.
Regards,
Sanjay
Many Thanks !!
Sanjay, you are GREAT !!)
Many many thanks) Only 5 hours ago I was devastated, now I am happy - everything is working again) I deserved a bottle of bear - pls let me know if you are ever in London or Vancouver, ok?
I am going to offer my thanks to Chris Mrulz as well. You are absolutely right - the bootloader works like a charm)
The last question - I upgraded it now to version SL6V3. Should I upgrade to CEOS_new?
Kind Regards,
Edward
EdJessops said:
Sanjay, you are GREAT !!)
Many many thanks) Only 5 hours ago I was devastated, now I am happy - everything is working again) I deserved a bottle of bear - pls let me know if you are ever in London or Vancouver, ok?
I am going to offer my thanks to Chris Mrulz as well. You are absolutely right - the bootloader works like a charm)
The last question - I upgraded it now to version SL6V3. Should I upgrade to CEOS_new?
Kind Regards,
Edward
Click to expand...
Click to collapse
Glad to hear your 4700 is alive. As for newer ROMs, all of the WM6.1 you see in this forum on the 4700s is based on ports from other devices. There has been no significant update and frankly, not likely to be. For me at least, later versions do not offer functional benefits that I can use. IMHO, functionality is more important than gaining the last nano-second of speed. I have not been able to improve on the basic SL61V3, and will leave it alone for now. It works well enough although I personally prefer the Lite version without IE and WMP.
My advice would be to try various ROMs to see which ones work best for you. I'm sure you will find one that suits.
Regards,
Sanjay
Can someone give me a link to OXA S8530XXJKA (DBT) full firmware for S8530 Wave 2...
I want to flash my phone and try to update with KIES....
thanks in advance....
theconqueror said:
Can someone give me a link to OXA S8530XXJKA (DBT) full firmware for S8530 Wave 2...
I want to flash my phone and try to update with KIES....
thanks in advance....
Click to expand...
Click to collapse
Did you try http://hotfile.com/dl/99644499/83fa601/S8530XXJKA.rar.html ? I'm downloading it too and will report back how it works (want to switch back to 1.2 so that I can continue developing under 1.x now that it has turned out there is no way of installing Bada 2.0 apps using current unofficial firmwares)
There's also a list of these firmwares at http://www.worcesterdwi.com/thread-145-1-1.html but they're all hacked / enhanced. I'll test them too.
Sucseed....
I downloaded the firmware from Samfirmware....
I flashed my phone....
After I connect it to KIES.....
KIES updated my phone to the latest version....
S8530XXJKA CSC_S8530_Open_Europe_Common_OXA_XXJK7
Now the firmware is
S8530XXKF1/S8530OXAKD7(DBT)
try it but change the product code to.... DBT
Menneisyys said:
Did you try http://hotfile.com/dl/99644499/83fa601/S8530XXJKA.rar.html ? I'm downloading it too and will report back how it works
Click to expand...
Click to collapse
Downloaded and have been trying to flash, back from XPKH3. So far, without any success.
- If I try to flash with the bundled MultiLoader version 2.62, it reports and error right at the beginning, right after (successfully) transferring the bootloader, upon trying to delete the old bootloader.
- If I try to flash with the latest (2.65) MultiLoader version, everything seems to be all right; however, after the flashing and restarting the phone, what I get is the usual connect screen with the exclamation mark. From there, I can only switch to download mode again, but nothing else.
Flashing back to the latest 2.0 XPKH3 (with 2.65, of course) always works.
I'll soon try flashing with 2.62 without overwriting the bootloader (that is, removing the checkmark from the first checkbox) to see what happens as it's at erasing the bootloader that 2.62 fails.
try this...
Download the firmware from samfirmware...
I can not give a external link to you because I'm a newbie here and I'm not allowed to do it.
I think the firmware in Samfirmware is full and without problem....the multiloader is in the file...V5.62
http://forum.xda-developers.com/showthread.php?t=1068735
is the real thread you gave me the link...do not forget to change the product code to DBT because I tried first XEU and KIES refused to update....
It should work properly....when I flashed just click ''full download and Master Rom" "LSI was already clicked by default"......
Good luck....
theconqueror said:
Download the firmware from samfirmware...
I can not give a external link to you because I'm a newbie here and I'm not allowed to do it.
I think the firmware in Samfirmware is full and without problem....the multiloader is in the file...V5.62
http://forum.xda-developers.com/showthread.php?t=1068735
is the real thread you gave me the link...do not forget to change the product code to DBT because I tried first XEU and KIES refused to update....
It should work properly....when I flashed just click ''full download and Master Rom" "LSI was already clicked by default"......
Good luck....
Click to expand...
Click to collapse
Thanks... you meant http://www.samfirmware.com/WEBPROTECT-s8530.htm . Just giving a try to the version there; hope I'll have better luck
theconqueror said:
Download the firmware from samfirmware...
I can not give a external link to you because I'm a newbie here and I'm not allowed to do it.
I think the firmware in Samfirmware is full and without problem....the multiloader is in the file...V5.62
http://forum.xda-developers.com/showthread.php?t=1068735
is the real thread you gave me the link...do not forget to change the product code to DBT because I tried first XEU and KIES refused to update....
It should work properly....when I flashed just click ''full download and Master Rom" "LSI was already clicked by default"......
Good luck....
Click to expand...
Click to collapse
Thanks again. I've found out what I've done wrong: I've forgotten to check in the "Boot Change" (first) checkbox. When checking it in, with all the firmware versions (S8530XXJKA.rar I've linked to above; GT-S8530_XEF_S8530XXKF1_S8530OXAKD7.rar linked from the SamFirmware repo as the latest (June 2011) 1.2 firmware; even hacked ones with call recording, that is, S8530XXJKA_FULL_Custom_SHP_CR_1.0b_sYCO.rar ) I've thrown it at, it worked just fine.
I've used ML 2.65 for flashing all the time. Haven't tested 2.62 this time.
Good news...
Happy for you...
Hello all,
links in previous posts are dead.
Can any of you post this file (previous 1.x version of bada, europeean or french XEF release).
Purpose is also downgrading and upgrade tests via Kies.
Best regards,
Fred
Hi ! I finally find a ROM on the internet.
Thanks
hi bada users tomorrow at 12:00 netherlands time sammobile will release a new bada 2.0 firmware (s8500MBUKI1). it's a vodafone firmware. please flash it with multiloader 5.65. for more info go to sammobile.com
lets talk here about this new firmware.
Enjoy!!
Meanwhile you could read here...
http://www.sammobile.com/threads/449-S8500MBUKI1-(Bada-2.0)
Best Regards
Let`s hope it will be stable and usable (KH3 is kind of buggy).
SamMobile Team proudly presents a new bada firmware, we are currently testing everything for you all, also we will list here the changes and what you should know before flashing and stuff like that. It is a Vodafone firmware and not 100% complete but instead of KH3 usable.
DevilM said:
SamMobile Team proudly presents a new bada firmware, we are currently testing everything for you all, also we will list here the changes and what you should know before flashing and stuff like that. It is a Vodafone firmware and not 100% complete but instead of KH3 usable.
Click to expand...
Click to collapse
allright thanks
1 hour left.... cant wait
It seems now online.
Downloading to PC...
Best Regards
Edit 1.
Short installed...
Nothing really "amazing" found... yet.
Yepp. Still Beta...
Maybe later if more time...
adfree said:
It seems now online.
Downloading to PC...
Best Regards
Edit 1.
Short installed...
Nothing really "amazing" found... yet.
Yepp. Still Beta...
Maybe later if more time...
Click to expand...
Click to collapse
But it works OK, and you can install LOW rsrc2 so you don't need to change the debuglevel. It seems to be faster, there are preinstalled widgets and they works. Twitter and Facebook in Social hub works but the apps are missing. Pretty much everythig works.
Alright I installed it and have to say I like it, no crashes yet and overall it`s faster than KH3. If you move the camera it seems to be faster too. Widgets are also working. There are 4 widgets in total: Calendar, Analog clock, Date and time widget and weather widget)
How come, samfirmware were allowed to release another Beta-ROM? I thought they were scared to do that since Samsung put pressure on them. Or is it a final ROM? Why would Vodafone even bother bringing out some Beta-ROM?
Code:
Type : Unofficial Version
Number : 262
Builder : Dell02
Host : SCMDELL16
Date : [B]2011/09/16[/B]
Time : 19:35:07
Size : 42468732 bytes
CheckSum : 0xef3c5853
This Version is around 1 month old...
Maybe Samsung internal Versions much closer to Final...
S8600 stuff are from October...
Best Regards
Adfree
Can you tell me how to find the date of S8600 FWs???
i want to know how new they are
i tried apps_compressed.bin decyrept but found nothing
Best Regards
i tried apps_compressed.bin decyrept but found nothing
Click to expand...
Click to collapse
Same result...
I can see only ELF Header at start... and then later some readable data.
Best Regards
Edit 1.:
This time with open eyes.
http://forum.xda-developers.com/showpost.php?p=18379790&postcount=18
433Mhz said:
How come, samfirmware were allowed to release another Beta-ROM? I thought they were scared to do that since Samsung put pressure on them. Or is it a final ROM? Why would Vodafone even bother bringing out some Beta-ROM?
Click to expand...
Click to collapse
They just said they are watched by Sammy and that they'll step back, nothing about beeing actually under pressure.
Either way: the new ROM is blaaazzzzing fast.
Restore functionality from KIES now works for me for everything except apps. (though several restores in a row may crash the phone).
I love Sammy and Bada
http://www.megaupload.com/?d=EMI41LUU
Here is content of RC1 and CSC... compressed part...
I have both folders copied:
Code:
System
SystemCSC
For study.
Best Regards
When Samsung will change the 5.1 mode in bada 2.0 ?? The sound is crap with the mode enabled. (crackling, crap sound for some mp3...)
Sorry for off topic , but i couldnt find thats y asking
1 after flashing this ..can i get back to stock Indian firmware . If yes , please give link to me
2 can i use this for both ..means wave s8500 and wave II
1. yes first flash to this indian firmware http://www.multiupload.com/PUHB6CFHWO.. then update to latest via kies..
2.no only wave 1
my brother changed my bada v1.2 into 2.0...and i didn't like the surprise...i downloaded S8500XXJL2 but i have a gt s8530...it gives me dblk write error without the fota, and dbl erase when i include the fota...someone please help me...i need to revert this today please...T_T
Dude, is it so difficult to use a S8530 ROM? S8500-S8530 do you know the difference?
I hope your phone is not bricked yet.
Try this:
http://hotfile.com/dl/118911503/3ebf648/S8530XXKC1_OXAKC1.rar.html
This is Bada 1.2 Open Europe for Wave II
Otherwise: Happy JointTestActionGrouping
Hi everyone,
sTune doesn't recognize my phone (s8500, bada 2.0, S8500XXKL6) and I have no idea what to do.
I'm sure all the drivers are installed but still it doesn't find my device no matter what I do.
Anyone have any idea what I should do?
Thanks in advance.
use Stune 1.06
http://www.handy-faq.de/forum/bada_forum/145607-stunes_stefandevs_samsung_wave.html
Stune 1.07 does not work with bada 2.0
Tried it, doesn't work as well..
s8500, bada 2.0
Click to expand...
Click to collapse
Please post exact Firmwareversion...
Enter *#1234# in your handset...
Best Regards
S8500xxkl6, though it's modified in Hebrew language.
Kies work ?
Maybe some mistake happens in Mod...
Kies + sTune use same Com Port...
Best Regards
Then how did he flash his firmware originally
Please double check on your device drivers
Maybe try to connect to linux if you got any distro installed
Best Regards
You can use TkFileExplorer...I think its better than Stune..
Drivers fully installed and kies works perfectly.
Tried on windows XP, bur it still doesnt work..
Thanks in advance
sTune works before?
I mean you have sTune expereince?
I am pretty sure that both Versions connects to all bada 2.0 Firmware...
So you can see attached device, IMEI etc. with sTune...
But for fully working you need 1.06 to access folders in every known bada 2.0 Firmware...
You can also try TkFileExplorer_2.4.exe
But if Kies work... then sTune should be also run.
Btw. I have only XP 32 and you?
Best Regards
This problem happened for me too
but i use an other computer and it working (same version )
Mr_W_o_l_f said:
This problem happened for me too
but i use an other computer and it working (same version )
Click to expand...
Click to collapse
Thanks, works on different computer with XP!
Thanks a lot everyone, problem solved.
Do you have Kies in Auto blabla Background?
Maybe Comp Port is then blocked/reserved by Kies...
Anyway, you find one solution.
Best Regards
adfree said:
Do you have Kies in Auto blabla Background?
Maybe Comp Port is then blocked/reserved by Kies...
Anyway, you find one solution.
Best Regards
Click to expand...
Click to collapse
Tried everything, perheps the drivers aren't installed correctly.
Thanks a lot any way!