Develop Bugs

Internal menu

http://wenku.baidu.com/view/e27ca2c66137ee06eff91876.html
After reading this I tried Code:
*#7092463*#
Several nice Settings, infos... and tests.
Like Touchscreentest with Coordinates, look weird Pic...
Bad. Not every Firmware support this Code.
JI5 for instance no chance... Reason I think is here:
http://forum.xda-developers.com/showthread.php?t=895526
We should more investigate this file...
I saw for S8000 they were also lucky to find new Code...
http://code.google.com/p/jetdroid/wiki/JetBootloader
I think this menu is active, only other Code needed for higher Firmware...
Best Regards

It seems not the Firmware Version is mandatory...
.. it seems this menu is locked...
I compared 2 Waves with same Firmware.
First no success. Second success... but after several Flashs I lost access to Internal menu.
Now after playing with AT commands... it is back.
It seems we can unblock... I have only no idea how exactly I've unblocked Internal menu.
Best Regards

Rsrc2_S8500(Low).rc2
Rsrc2_S8500(Mid).rc2 ----> it seems this can access Internal menu
It seems *.RC2 is the Block for Internal menu.
Compare both files, you see only 1 Byte difference.
Maybe this means something like, Low Security, Middle Security... maybe there are higher Settings possible...
I will check this.
Best Regards

how come this menu exists on wave 525 regardless of firmware?

hmm, I think I'm missing something here. In all the firmwares I've downloaded not once have I seen a Rsrc2_S8500(Mid).rc2.
Can you upload yours or otherwise let us know where we can get one from please.
Also can you tell us which firmware you're running please?
Cheers in advance,
D.

you can make yours as MID or even High with Wave remaker
http://forum.xda-developers.com/showthread.php?t=1028714
Don't forget to give a thanks to ho1od

Enter Code into handset:
Code:
[B]*#33284*#[/B]
= Debug Level (Low, Midle, High)
Best Regards

adfree said:
Enter Code into handset:
Code:
[B]*#33284*#[/B]
= Debug Level (Low, Midle, High)
Best Regards
Click to expand...
Click to collapse
Cheers Adfree - that's exactly what I was looking for ... I'm gonna try figure out decent keymaps for the android port
9600 Baud and check the setting UE Awake...
Ok...
Volume + = 0x54
Volume - = 0x55
Call = 0x50
Home = 0x53
Hangup = 0x51
Camera Halfpress = 0x8e
Camera Fullpress = 0x8d
Standby = 8f
now... how to change these into values for the s3c-keypad.kl file...

duxxyuk said:
now... how to change these into values for the s3c-keypad.kl file...
Click to expand...
Click to collapse
sorry to be off topic...
but...
the Android kernel interpets things differently, you can look at the kernel dmesg log when pressing the buttons if you want to see what is attached where, but some keys don't work from fota loader yet, people not interested in the dev side (like fixing fota or kernel issues instead of trying to install android apps) should wait for a proper release.

Not sure if before... but Backup and Restore seems possible on KK5...
Searching for folder where it is stored...
Best Regards

adfree said:
Not sure if before... but Backup and Restore seems possible on KK5...
Searching for folder where it is stored...
Best Regards
Click to expand...
Click to collapse
Thanks adfree
in before firmwares backup and restore works with kies but i dont know is it
available with phone or no .
can you please tell me how can i access to this menu ? i want to test it with other firmwares

Normally the answer is in this Thread...
Anyway.
Menu is blocked if not on Debug Level Mid or High... So first step:
*#33284*#
Later set back to Low to prevent Bluescreens.
Second step is:
*#7092463*#
Then:
4 Module Setting
11 Sync
At the moment no idea where Backupfile is stored...
In WinComm I saw this:
Code:
SmlBackupRestoreDebugHistoryResult: Cannot make config file!(/User/Mass/SmlMgr/_LastBnRHistory.txt)
I will deeper research...
Please remember. At your own risk. No idea if sideeffects...
Best Regards

any try to restoring failed
the error is : Restoring fail ( Manifest error or no Manifest ! )
---------- Post added at 12:30 PM ---------- Previous post was at 12:18 PM ----------
with stune :
User > SyncML
there is some *.cfg files
what is your idea is them backup files ?

Code:
+[059]=> [622.092]Packaging Start[/Media/_SamsungBnR_/Message.bk]
+[060]=> [622.109]Packaging Finish[/Media/_SamsungBnR_/Message.bk]:[Success]
+[061]=> [622.147]Packaging Start[/Media/_SamsungBnR_/MusicSetting.bk]
+[062]=> [622.166]Packaging Finish[/Media/_SamsungBnR_/MusicSetting.bk]:[Success]
I was able to create folder:
/User/Mass/SmlMgr/
Then file is written after Backup _LastBnRHistory.txt
Maybe I am blind, can't find yet folder /Media/_SamsungBnR_/
Maybe hidden or I am blind...
At the moment toooo lazy to backup again all files and searching for *.bk extension...
Maybe later more...
About Restore...
Success, but I have nothing installed yet and no SD card...

with stune :
User > SyncML
there is some *.cfg files
see below image :

there is some *.cfg files
Click to expand...
Click to collapse
Strange, I thought they are for FOTA...
I'll update to bada 1.0 and check again...
Maybe then more success to find *.bk files...
Best Regards

XXKL6 on my S8530 shows me Total Heap Mem.
245.760K
This seems 40 MB more then on bada 1.2...
Will check S8500...
Best Regards

adfree said:
XXKL6 on my S8530 shows me Total Heap Mem.
245.760K
This seems 40 MB more then on bada 1.2...
Will check S8500...
Best Regards
Click to expand...
Click to collapse
I can confirm this number in S8500... in XXKK7, 245.760 K... It seems that S8500 and S8530 are identical in memory issues..
Cheers!

Maybe we can find this info from S8600, S7250 and so on...
S8600 should have "more"... maybe...
Best Regards

that's right adfree, my s8600 show me more!

CSC write error

Hi,
i edit my csc with wave remaker , now when i try to flash the phone with the new csc , its stop on csc (Multi loader 5.67)
ERROR : CSC write

hello
more exacts details :for witch phone ? can you open your custom csc with wave remaker ? can ou see CSCrcs,CSCsfs and CSC.bin (4kb) ?
witch version of wave remaker ?

Hi,
The log of multiloader :
ERR : NAK_INVALID_FCS 0
Error : CSC Write [18.3s]

Hi,
Phone : Wave 723
I can open it
I can see everything in the explorer but in the program i cant see csc.bin
Wave Remaker 0.2.7

You Must be Encode with Wave 3 in the Until Tab
Than you can Flash it...
Sorry for bad english..
Regards...

Hi,
How can i do that? can you explain more?
and thx for replay

AeroxTobi said:
You Must be Encode with Wave 3 in the Until Tab
Than you can Flash it...
Sorry for bad english..
Regards...
Click to expand...
Click to collapse
No need to encrypt. All done automatically. This works only for viewing. For flashing not tested

is your firmware bada 1 or 2 ?

Hello,
its bada 2.0 but now i tried to flash it again but the flash stopped and now the phone is dead , i cant get into Download Mode , can i reflash it?

yes you can
full download downloader since v5.64 to v5.67 ,BRCM2153 ,9files since boot to fota

Hello, but i cant but the phone in the download mode , so the multiloader cant detect the phone?

take away battery , power on 10 second for capacity ,put on again battery and try download mode (vol down + camera +on)

So for me, I had to once again Encrypten with the Wave 3 ticks
Than Working Flash on CSC...

yakapa40 said:
take away battery , power on 10 second for capacity ,put on again battery and try download mode (vol down + camera +on)
Click to expand...
Click to collapse
Hi,
It doesn't work for me, i cant get into download mode
and thx for help

Hi Ahmed
Either your phone is dead and you will need a JTAG or your battery is empty
In both cases
Try to recharge the battery in anyway to check if the phone is still alive or not
Best Regards

unplug your phone from usb first..
regards

Hi,
thank you everyone , i will send it to someone to jtag it

[Q] Firmware Installation Problem - ERR : Dbl Erase

Hi everyone!
Actually Im asking for my friend.
He tried to install a new firmware, and get this error message in downloader:
Download Start Ch[0]
BootLoader 1703.9KB OK[0.9s]
ERR : Dbl Erase
And on the device he get this message:
Abnormal SW Detected!
Upgrade Only
When he turn-on the device, its shows him the startup screen and its restart after that.
We've tried to install a few firmawares and even 1.2 official version, but still the same error messages.
Any Advice??

http://forum.xda-developers.com/showthread.php?t=1928495
Again.
Why you need Bootloader Change ?
Bootloader seems intact, working... OTHERWISE you would see NOTHING.
The only Question... Which Firmware before... bada 1 or 2...
As example XXLA1 DBT bada 2...
Hope this time more clear.
Best Regards

Im sorry for the double post. My mistake!
thanks for the answer, I'll try it.
(By the way, the firmware that was before is: official 1.2 firmware.)

I tried to install 2.0 firmware like u said, and that is the error message that i get:
Download Start Ch[0]
ERR : FOTA Erase
After that, I tried to install 1.2 firmware:
Download Start Ch[0]
Amss 12859.1KB OK[5.1s]
Error : Apps Write [0.3s]
Any idea?

Maybe problem is your battery percentage is finished ?

So just to Charge the phone, and then try again?

shaiws said:
So just to Charge the phone, and then try again?
Click to expand...
Click to collapse
but you can't charge now via adapter.You can charge it on other wave or change your battery and try reflashing
only suggestion

If it doesnt charge, so how can it be that the device can turn-on (until the startup screen, and then it restart) and also, use the download mode?

shaiws said:
If it doesnt charge, so how can it be that the device can turn-on (until the startup screen, and then it restart) and also, use the download mode?
Click to expand...
Click to collapse
as i said charge your battery on other phone or use new battery

I mean, I can turn-on the device, and also can use download mode.
When i turn-on the device, its shows me the startup screen and restart after that (loop).

turn off your device and connect it to the adabter
leave it connected for an hour then try to flash it after this....you may notice that your device might get hot while charging...don't worry
Best Regards

By the way, the firmware that was before is: official 1.2 firmware.
Click to expand...
Click to collapse
bada 1.x need Bootloader from 1.x Firmware...
bada 2.0 need Boot from 2.0
So try XXJL2 Firmware for instance...
Btw...
I'm from Germany so I use most DBT... German Firmware...
I have NO idea, what you mean with official 1.2 firmware in your country.
Please. Next time if you write something about Firmware then minimum info:
EXACT Firmwareversion.
Name of Firmware...
XXLA1 DBT was only example from me.
Best Regards
---------- Post added at 02:54 PM ---------- Previous post was at 02:45 PM ----------
If hebrew Firmware...
Then my GOOGLE search...
S8500BJJJI1
s8500BJJKC1 ---- bada 1.2
Try bada 1.x Firmware...
You can NOT mix Boot.
Boot 1.x Firmware 2.0 = NO
Boot 2.0 Firmware 1.x = NO
Best Regards

adfree said:
bada 1.x need Bootloader from 1.x Firmware...
bada 2.0 need Boot from 2.0
So try XXJL2 Firmware for instance...
Btw...
I'm from Germany so I use most DBT... German Firmware...
I have NO idea, what you mean with official 1.2 firmware in your country.
Please. Next time if you write something about Firmware then minimum info:
EXACT Firmwareversion.
Name of Firmware...
XXLA1 DBT was only example from me.
Best Regards
---------- Post added at 02:54 PM ---------- Previous post was at 02:45 PM ----------
If hebrew Firmware...
Then my GOOGLE search...
S8500BJJJI1
s8500BJJKC1 ---- bada 1.2
Try bada 1.x Firmware...
You can NOT mix Boot.
Boot 1.x Firmware 2.0 = NO
Boot 2.0 Firmware 1.x = NO
Best Regards
Click to expand...
Click to collapse
thank you I will try later...
btw we can not download any official firmware in Israel. I do not know why, but there is no one link for Israel firmware.:crying:
even in sammobile there is no link?? do you guess why??

even in sammobile there is no link?? do you guess why??
Click to expand...
Click to collapse
Really sorry. I'm German user from Germany... DBT is all I need.
So I have no idea what is in other countries...
But you could try XXJL2 DBT as test... because 1.2 Firmware
Long time ago I flashed some hebrew Firmware... WITHOUT Bootloader.
If not dream, it was success.
So Bootloader is not special...
Good luck.
Best Regards
Edit 1.
Firmware try this:
http://forum.xda-developers.com/showthread.php?t=1254775

adfree said:
Really sorry. I'm German user from Germany... DBT is all I need.
So I have no idea what is in other countries...
But you could try XXJL2 DBT as test... because 1.2 Firmware
Long time ago I flashed some hebrew Firmware... WITHOUT Bootloader.
If not dream, it was success.
So Bootloader is not special...
Good luck.
Best Regards
Edit 1.
Firmware try this:
http://forum.xda-developers.com/showthread.php?t=1254775
Click to expand...
Click to collapse
I will try it, thank you

[Q] download mode - no buttons S8500

Hi.my wave have small crash and i havent got camera and lock key.. i need to get DM on my S8500. How? pz help

No Cam Key
and
No Lock Key ?
This is hard...
If FOTA from Badadroid is on Wave... you can press Middle Key...
FOTA output and blabla...
This is like Download Mode.
For Power on you can use USB cable...
This powers on Wave...
But it seems without Lock or Cam Key no key combination...
Tigrouzen FOTA, no idea... but if I remember correct, Middle Key is removed for BL bTerm...
If you have chance... maybe try DL JIG from friend... or make self...
I mean something like this:
http://forum.xda-developers.com/showpost.php?p=12767180&postcount=3
See only Picture.
Best Regards
---------- Post added at 02:29 AM ---------- Previous post was at 01:45 AM ----------
Btw...
What is actual status of your Wave?
If you can start bada, then you can easy from here activate Download Mode via Multiloader.
Press Port Search
Best Regards

@adfree
Yes, i can start Bada..
JIG? I havent micro usb and 300k, cant buy..
Hmm. When i push Port Search in ML i have Phone picture and Please do not bla bla on screen. I cant flash anything, Serial port error (?) factory reset dont help
Plz i want to flash Zendrokat Fota and Bootfiles only

Yes, i can start Bada..
Click to expand...
Click to collapse
After Multiloader you can see Donwload Mode Picture?
See added Picture...
You use ML 5.67 ?
Windows what?
XP 7 or 8 ?
64 or 32 bit ?
If ML shows something like this:
Code:
Warring : Security fail!!
You have bigger problems...
Best Regards

Yes I see that picture.
Win7 64bit
ML 5.67
Later i tell you what say Multiloader. Now - school
@adfree
Ok, Wave have DM (Like thins on picture), ML tell: Ready Lismore
Change to MSM7x30
Trying to push Bootfiles and..
Cant load binary files..
What is wrong?

ghoslslender124 said:
Yes I see that picture.
Win7 64bit
ML 5.67
Later i tell you what say Multiloader. Now - school
@adfree
Ok, Wave have DM (Like thins on picture), ML tell: Ready Lismore
Change to MSM7x30
Trying to push Bootfiles and..
Cant load binary files..
What is wrong?
Click to expand...
Click to collapse
S8500 uses Lsi not msm

You are awesome! Thanks @adfree and @Hero 355 :highfive::good::laugh:
All works B) thanks :*

ZH960_MB_V4.1_XXXXXXXX [RANDOM DEVICES] FIRMWARE

Hlo guys I don't know were it will work or not but here is the file for your Chinese tablet firmware zh960_mb_v4.1_20180508
Brand : Random (Any device with zh960_mb_v4.1_xxxxxx)
Model : same as brand
Chipset : mt6582
Android version :4.4.2
Here is the link to download : https://firmware.gem-flash.com/index.php?a=downloads&b=folder&id=51836
Note : Only sign uped members can download wana download sign up fast one member can download file in 24hrs.
Comment below who got the firmware working !!!
Main : https://drive.google.com/u/0/uc?id=1RKT06Q4hvluQETq1gLgSj7pPqEaCegev&export=download/

Hilal GR BRO said:
Hlo guys I don't know were it will work or not but here is the file for your Chinese tablet firmware zh960_mb_v4.1_20180508
Brand : Random (Any device with zh960_mb_v4.1_xxxxxx)
Model : same as brand
Chipset : mt6582
Android version :4.4.2
Here is the link to download : https://firmware.gem-flash.com/index.php?a=downloads&b=folder&id=51836
Note : Only sign uped members can download wana download sign up fast one member can download file in 24hrs.
Comment below who got the firmware working !!!
Main : https://drive.google.com/u/0/uc?id=1RKT06Q4hvluQETq1gLgSj7pPqEaCegev&export=download/
Click to expand...
Click to collapse
Hi, thanks for link... I just did it and Flashed finish well
But, my tabs become Blank screen..... ( only blur lines) can't see clearly
What's should I do next?
Please help....
Thanks anyway

Jowarnerrin said:
Hi, thanks for link... I just did it and Flashed finish well
But, my tabs become Blank screen..... ( only blur lines) can't see clearly
What's should I do next?
Please help....
Thanks anyway
Click to expand...
Click to collapse
Did you try two links