hi
First thanks to sumesd & ClydeB1 with out their help
i would not have been successful in this process:good::laugh:
Few people had asked me how i went back to stock via CWM so im posting the same for ur info.
I am not a techie i just read and do what i need to. This worked for me so it should also for ur. I was on 1.29 did not do any previous OTA so i was able to get the OTA via this process
I was told that if u have updated to 2.17 u might not be able to get it back if u try from 1.29
if u have 2,17 nand back up yes u can do the below.Stock recovery given in the below link but im not sure if it will work.But sr developers says yes
i had the original stock rom backed up via CWM (1.29)
so if u have it too u can do this
1. Copy the boot.img from ur CWM nand bakup
keep it on ur PC and flash it via the fastboot comand on to ur Phone
2. Flash the backed up orignal rom via CWM
3. Then flash the original stock recovery
via fast boot command or u can use the tool given below it is easier
i have used it and it worked for me:good:
4. Re lock the boot loader
again via fast boot command or the tool given below
I used this tool to re lock and flash the recovery it can also do most of the above process
(thanks to thunder07)
link : http://forum.xda-developers.com/showpost.php?p=27913286&postcount=1
For stock recovery get it from here(thanks to sumesd)
Link : http://forum.xda-developers.com/showpost.php?p=30863908&postcount=1
one more : http://forum.xda-developers.com/showthread.php?t=1928019 (thanks manachivm this is India stock)
If u want 2.17 stock rom CWM back up INDIA (thanks kryptoner)
go here : http://forum.xda-developers.com/showpost.php?p=32444876&postcount=2419
one more link for the same : http://d-h.st/aEz
Note : it is a CWM back up u need to place it inside the CWM backup folder on ur SD to flash it via CWM nand restore OK . IT is not a update ZIP
hope the above helps:good::laugh:
The title is misleading!
You are saying that you restored everything to stock from CWM, but you have flashed the stock boot.img & stock recovery through your PC.
Well, if you are using your PC, the better & faster way is to simply re-lock & flash the latest RUU for your device (that ofcourse excludes JB, which till now cannot be restored to fully stock due to the Hboot 1.23).
omar302 said:
The title is misleading!
You are saying that you restored everything to stock from CWM, but you have flashed the stock boot.img & stock recovery through your PC.
Well, if you are using your PC, the better & faster way is to simply re-lock & flash the latest RUU for your device (that ofcourse excludes JB, which till now cannot be restored to fully stock due to the Hboot 1.23).
Click to expand...
Click to collapse
hi
i did this and it worked for me and i have successfully up dated my OTA to 2.17 some guys asked me how so i have given the process for the procees u have given their are a few good tuts for the same:laugh:
this is just another way to do the same which i felt was easy if u like it u can do it :laugh:
and by doing nand restore i feel i save time ie i dont need to re install all my apps and contacts again
and just relocking is not enough u need to add stock recovery, then re lock and then flash the RUU via Pc at least that is what i have read
I am not saying it does not work, I am sure it does. but your title claims "Everything", whereas you are NOT doing "Everything" from CWM.
As for flashing through RUU, you dont need the stock recovery nor the stock boot to flash a stock RUU.
omar302 said:
I am not saying it does not work, I am sure it does. but your title claims "Everything", whereas you are NOT doing "Everything" from CWM.
As for flashing through RUU, you dont need the stock recovery nor the stock boot to flash a stock RUU.
Click to expand...
Click to collapse
hi
i was just passing on some info i know and i have changed the topic see
and i hope u are right that u dont need stock recovery to flash the RUU because as per what i read it is needed .But then im not a techie just a guy who reads and does what is said thats all
Re-Locking (without stock boot & recover) and Flashing the RUU from fastboot (or bootloader can't remeber exactly) worked for me several times. Even if I get the security warning message, the RUU still flashed.
I believe there are two issues that the RUU checks, the ROM version & Hboot version. if both are either equal or higher in the RUU, it would flash succussfully.
my problem is my
C:\fastboot getvar
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.12.0
(bootloader) version-baseband: 1.1204.1
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.17.720.2
(bootloader) serialno: SH24DW103047
(bootloader) imei: 359188047063714
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 3800mV
(bootloader) devpower: 40
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.813s
And i am trying to update with RUU
RUU_ENDEAVOR_U_ICS_40_hTC_Asia_India_1.28.720.10_Radio_1.1204.103.14_release_257789_signed.exe
it still say ERROR 140
y0 said:
my problem is my
C:\fastboot getvar
...
(bootloader) version-main: 2.17.720.2
And i am trying to update with RUU
RUU_ENDEAVOR_U_ICS_40_hTC_Asia_India_1.28.720.10_Radio_1.1204.103.14_release_257789_signed.exe
it still say ERROR 140
Click to expand...
Click to collapse
Because you need 2.17.720.2, not 1.28.720.10
Related
hi, i have this htc one x.
this is fastboot info (fastboot getvar all)
Code:
(bootloader) version: 0.5a
(bootloader) [COLOR="Red"]version-bootloader: 1.39.000[/COLOR]0
(bootloader) version-baseband: 5.1204.164.30H
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) [COLOR="Red"]version-main: 3.14.771.34[/COLOR]
(bootloader) serialno: HT23TW126661
(bootloader) imei: 359188042590570
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ4610000
(bootloader) [COLOR="Red"]cidnum: H3G__G04[/COLOR]
(bootloader) battery-status: good
(bootloader) battery-voltage: 4179mV
(bootloader) devpower: 100
(bootloader) partition-layout: None
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.826s
actually it has running cyanogen rom, but i wanna get back to stock rom.
as info, i haven't nandroid backup or anything else.
i have downloaded latest ruu from Hutchison, but i don't find exactly rom. H3G__G04 (H3G_SWE)
i have downloaded rom from H3G from UK. and i tried flash this rom, but i get bootloader error.
i almost forget it. i was locked bootloader to run RUU, and i have read many threads from forum.
anybody can help me to get back to stock rom please?
hyber_99 said:
hi, i have this htc one x.
actually it has running cyanogen rom, but i wanna get back to stock rom.
as info, i haven't nandroid backup or anything else.
i have downloaded latest ruu from Hutchison, but i don't find exactly rom. H3G__G04 (H3G_SWE)
i have downloaded rom from H3G from UK. and i tried flash this rom, but i get bootloader error.
i almost forget it. i was locked bootloader to run RUU, and i have read many threads from forum.
anybody can help me to get back to stock rom please?
Click to expand...
Click to collapse
What sense version do you want in result: 4+ or 5?
Did you update your phone via OTA earlier?
Post bootloader error here, please. Looks like your bootloader is updated and do not match requirements to flash RUU from Hutchison.
1.- i dont know what is better, if 4+ or 5.
2.- in fact the phone was updated by other person, i don't know what he did :/
3.- let me flash ruu again and post bootloader error.
if it's usefull, it has Team Win Recovery Project v2.4.1.0 installed.
thanks for reply
genocide_ru said:
What sense version do you want in result: 4+ or 5?
Did you update your phone via OTA earlier?
Post bootloader error here, please. Looks like your bootloader is updated and do not match requirements to flash RUU from Hutchison.
Click to expand...
Click to collapse
Error 140, error with bootloader version.
and if i try with Europe RUU i got Error with Carrier ID.
hyber_99 said:
Error 140, error with bootloader version.
and if i try with Europe RUU i got Error with Carrier ID.
Click to expand...
Click to collapse
Well, looks like firmware\hboot was updated and latest RUU for your CID requires older firmware\hboot.
So, you can't use old RUU to go back to stock.
You need to flash stock ROM for 1.39 hboot from recovery
Try to find ROM like this one, but older: http://forum.xda-developers.com/showthread.php?t=1546970&highlight=*stock*
I guess you need to search 3.18 or 3.20 version, don't remember wwich one will work with 1.39
ok, i'll search it.
thank you sir, i'll let you know the results.
one more question, can i use this method posted here? http://forum.xda-developers.com/showthread.php?t=1927048
exactly this:
Nand for H3G__106 - thanks to Jackster88
Part 1
Part 2
Quote:
Instructions:
***For this nand to work you need HBOOT 1.39 and cwm***
1) go into fastboot and enter "fastboot oem lock" - the device will reboot
2) go into fastboot again and enter "fastboot oem rebootRUU" - there will be a black screen with a silverish HTC logo
3) enter "fastboot flash zip firmware.zip" (you need the firmware.zip from page 1 for this)
3a) enter the same again, the green bar under the logo should go to 100% (either after the first or second time)
4) enter "fastboot reboot-bootloader" to go back to your fastboot
5) unlock your device again with the unlock code ("fastboot flash unlocktoken Unlock_code.bin")
6) Restore your old boot.img (fastboot flash boot name_of_boot_file.img) and recovery (fastboot flash recovery name_of_recovery_file.img), make sure you copied them from the nandroid backup folder we created earlier into the folder that contains the fastboot.exe you're using.
7) Reboot and you should now have Hboot 1.39 with your old boot and recovery.
(8) If it won't work we still have the backup ready to restore the old system, Hboot isn't changeable right now on S-ON devices outside of the RUU routine - so even if you restore your nandroid you should still have Hboot 1.39 now)
Confirmed working with H3G__001, H3G__003, H3g__G04
Click to expand...
Click to collapse
hyber_99 said:
one more question, can i use this method posted here? http://forum.xda-developers.com/showthread.php?t=1927048
exactly this:
Click to expand...
Click to collapse
yes, you can try this method
except, I guess you need not flash firmware, because you are already on 1.39
genocide_ru said:
yes, you can try this method
except, I guess you need not flash firmware, because you are already on 1.39
Click to expand...
Click to collapse
thank you very much.
after all i solve my problem installing RENOVATE Final 4 Rom ------ http://forum.xda-developers.com/showthread.php?t=1705334&highlight=3+20
after installing rom, we need flash kernel manually i flashed stock kernel.
my problem was that with cyanogen 10.1 this phone cann't accept unlocking code,
but now with renovate rom, code was accepted and phone now is sim unlocked
thank you very much for your time
hyber_99 said:
thank you very much.
my problem was that with cyanogen 10.1 this phone cann't accept unlocking code,
but now with renovate rom, code was accepted and phone now is sim unlocked
thank you very much for your time
Click to expand...
Click to collapse
No problem, man!
Glad I helped you with this :good:
Good morning guys.
I am wondering if anyone is able to help me before i go completely nuts trying to work this out. (I also hope its ok to make a new thread)
A few weeks ago i rooted my M8 following the steps on this website (htconeroot. - how-to-root-htc-one-m8/) with no issues at all. Unlocked the boot loader and also there is the software tag saying modified (my understanding is this is normal). Installed the custom recovery with no drama.
A couple of days ago i got the OTA notification that i can now download 5.0.1 (Happy days) however this is where i seem to be running into problems. I know that i need to revert to the stock recovery from TWRP and then from here need to relock the boot loader to install the OTA update. I think my main problem is that i don't know what version of the stock rom i need to install. I have tried a few but none of them will boot into recovery from the boot loader.
So this is where i am.
Boot loader works fine and will run fast boot and boot to custom recovery - does state that the OS - (Blank)
Davids-MBP:mfastboot-v2 Raynor$ fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: VODAP110
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 26b322e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.007s
I have a swisscom locked phone (VODAP110) the software version is (3.29.166.9 from phone) however the main-version is blank, another website said i need a stock recovery (x.xx.166.x - Vodafone CH-DE (Switzerland - Germany))
The last stock recovery that i put on the phone was (3.29.161.5 recovery.img) this then would allow me to start the phone and run the OTA update. From here the phone will restart and start the update but after about 20/25% the phone will crash displaying a picture of the phone with a red triangle and upside down exclamation mark. I read somewhere that if this problem happens to erase the cache and it should fix the problem but it didn't.
Could anyone please point me in the correct direction or help me solve the problem i am having.
Do i need to ?????
1) install the correct stock recovery (if so could someone please help me find the correct version)
2) Flash the stock rom from HTCDev (no clue how to do this with fast boot and if it will restore the recovery)
3) Give up on OTA and look for a custom 5.0.1 flash and use TWRP to flash from recovery.
Thanks so much for any help.
raynordg said:
Good morning guys.
I am wondering if anyone is able to help me before i go completely nuts trying to work this out. (I also hope its ok to make a new thread)
A few weeks ago i rooted my M8 following the steps on this website (htconeroot. - how-to-root-htc-one-m8/) with no issues at all. Unlocked the boot loader and also there is the software tag saying modified (my understanding is this is normal). Installed the custom recovery with no drama.
A couple of days ago i got the OTA notification that i can now download 5.0.1 (Happy days) however this is where i seem to be running into problems. I know that i need to revert to the stock recovery from TWRP and then from here need to relock the boot loader to install the OTA update. I think my main problem is that i don't know what version of the stock rom i need to install. I have tried a few but none of them will boot into recovery from the boot loader.
So this is where i am.
Boot loader works fine and will run fast boot and boot to custom recovery - does state that the OS - (Blank)
Davids-MBP:mfastboot-v2 Raynor$ fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT43NWM12442
(bootloader) imei: xxxxxxxxxxxx
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: VODAP110
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 26b322e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.007s
I have a swisscom locked phone (VODAP110) the software version is (3.29.166.9 from phone) however the main-version is blank, another website said i need a stock recovery (x.xx.166.x - Vodafone CH-DE (Switzerland - Germany))
The last stock recovery that i put on the phone was (3.29.161.5 recovery.img) this then would allow me to start the phone and run the OTA update. From here the phone will restart and start the update but after about 20/25% the phone will crash displaying a picture of the phone with a red triangle and upside down exclamation mark. I read somewhere that if this problem happens to erase the cache and it should fix the problem but it didn't.
Could anyone please point me in the correct direction or help me solve the problem i am having.
Do i need to ?????
1) install the correct stock recovery (if so could someone please help me find the correct version)
2) Flash the stock rom from HTCDev (no clue how to do this with fast boot and if it will restore the recovery)
3) Give up on OTA and look for a custom 5.0.1 flash and use TWRP to flash from recovery.
Thanks so much for any help.
Click to expand...
Click to collapse
Maybe this one works? This is the 3.29.161.9 recovery. It's from my VODAPE17 cid
1: download the ota, take out the firmware.zip and in that zip is a recovery.img. that is your correct stock recovery that you need.
2: go to the general section - collection of backups and firmwares. Have a read there and look for your cid in the list with backups.
Please do not relock the bootloader that is not needed for an ota !
And delete your serial !
I was forgotten to paste the url: https://mega.co.nz/#!nZkCWZAL!djqZnzAlVfHslzWJxUxvW5cLKHdI9BIhr_uxzjFxbng
I also have this Problem with my M8 (3.29.166.9). I also flashed the new recovery from the OTA, but when i flashed the OTA, the recovery wrote Status 7 error ...
New download of the OTA doesn't worked..
Any Idea ?
Sorted
Petert87 said:
Maybe this one works? This is the 3.29.161.9 recovery. It's from my VODAPE17 cid
Click to expand...
Click to collapse
Hi Petert87 tried this one the other day but it didn't work for me.
Mr Hofs said:
1: download the ota, take out the firmware.zip and in that zip is a recovery.img. that is your correct stock recovery that you need.
2: go to the general section - collection of backups and firmwares. Have a read there and look for your cid in the list with backups.
Please do not relock the bootloader that is not needed for an ota !
And delete your serial !
Click to expand...
Click to collapse
Mr Hofs, You absolute legend. This was a very quick fix (No. 1) back up and running now.
onkel_Andi said:
I also have this Problem with my M8 (3.29.166.9). I also flashed the new recovery from the OTA, but when i flashed the OTA, the recovery wrote Status 7 error ...
New download of the OTA doesn't worked..
Any Idea ?
Click to expand...
Click to collapse
Hi onkel.
the process i went through was as follows.
1) force download the OTA from swisscom and copy off to computer.
2) do what Mr Hofs said above and extract the ROM and dig out the recovery.img
3) reset with fast boot - (fastboot reboot-bootloader)
4) flash recovery (fastboot flash recovery recovery.img
5) fastboot erase cache
6) fastboot reboot
7) install OTA from within booted OS
8) wait.......
Thanks for taking the time to read through my problem guys.
@Mr Hofs if you would like the OTA update or recovery.mg please let me know.
raynordg said:
Hi Petert87 tried this one the other day but it didn't work for me.
Mr Hofs, You absolute legend. This was a very quick fix (No. 1) back up and running now.
Hi onkel.
the process i went through was as follows.
1) force download the OTA from swisscom and copy off to computer.
2) do what Mr Hofs said above and extract the ROM and dig out the recovery.img
3) reset with fast boot - (fastboot reboot-bootloader)
4) flash recovery (fastboot flash recovery recovery.img
5) fastboot erase cache
6) fastboot reboot
7) install OTA from within booted OS
8) wait.......
Thanks for taking the time to read through my problem guys.
@Mr Hofs if you would like the OTA update or recovery.mg please let me know.
Click to expand...
Click to collapse
Nice mate, @Mr Hofs is a real master
Maybe you can upload the OTA, firmware and recovery on mega.co.nz and post the links here: http://forum.xda-developers.com/showthread.php?t=2701376
Petert87 said:
Nice mate, @Mr Hofs is a real master
Maybe you can upload the OTA, firmware and recovery on mega.co.nz and post the links here: http://forum.xda-developers.com/showthread.php?t=2701376
Click to expand...
Click to collapse
+1 @Mr Hofs certainly is!!!!! learned loads from that guy
Recovery VODAP110
Petert87 said:
Nice mate, @Mr Hofs is a real master
Maybe you can upload the OTA, firmware and recovery on mega.co.nz and post the links here: http://forum.xda-developers.com/showthread.php?t=2701376
Click to expand...
Click to collapse
uploaded and posted on thread.
https:// mega.co.nz/#!24UliTKJ!b5h272Mwt5HS7sP9H6tiJTAS4lBFXu8iRRBqlYE6xd8
Good it worked.
raynordg said:
Hi Petert87 tried this one the other day but it didn't work for me.
Mr Hofs, You absolute legend. This was a very quick fix (No. 1) back up and running now.
Hi onkel.
the process i went through was as follows.
1) force download the OTA from swisscom and copy off to computer.
2) do what Mr Hofs said above and extract the ROM and dig out the recovery.img
3) reset with fast boot - (fastboot reboot-bootloader)
4) flash recovery (fastboot flash recovery recovery.img
5) fastboot erase cache
6) fastboot reboot
7) install OTA from within booted OS
8) wait.......
Thanks for taking the time to read through my problem guys.
@Mr Hofs if you would like the OTA update or recovery.mg please let me know.
Click to expand...
Click to collapse
THANKS !! Now it works ! My Problem was that I had the same recovery as you...
Back to stock problem
Hello,i have a similar problem. I did everthing as you,rooted,custom recovery and unlock bootloader on htcdev,all to try out custom roms like arhd and so on. But i didn't do a nandroid backup,because i'm a fool and didn't know what i was doing. When i wanted to go back to stock i tried flashing 3.29.161.9 as it's similar to our stock rom but had no luck,still no updates. When i go to fastboot my os says os-3.29.166.9,so clearly there lies i problem. i need i stock 3.29.166.9 nandroid backup so i can go to stock. i've downloaded the recovery you uploaded and put it in 3.29.161.9 rom but no luck. So can you please upload a 3.29.166.9 nandrod backup. Thanks in advance. And mister Petert87 and Mr Hofs if you have any idea how to solve my problem please tell can you tell me. Cheers guys
OTA Firmware
5.0.1 Swisscom firmware OTA
OTA_M8_UL_L50_SENSE60_MR_Vodafone_CH-DE(swisscom_only)_4.19.166.2-3.29.166.9_release_417015636rjn6nthj40isc.zip 659.7 MB
https:// mega.co.nz/#!r0UnlBRR!lfcnKjURWCaVd7ddTUQ-r80A475H81MH5i-eHp2MN0g
raynordg said:
5.0.1 Swisscom firmware OTA
OTA_M8_UL_L50_SENSE60_MR_Vodafone_CH-DE(swisscom_only)_4.19.166.2-3.29.166.9_release_417015636rjn6nthj40isc.zip 659.7 MB
https:// mega.co.nz/#!r0UnlBRR!lfcnKjURWCaVd7ddTUQ-r80A475H81MH5i-eHp2MN0g
Click to expand...
Click to collapse
No news about a nandroid backup?
in the same pickle
dexterts said:
No news about a nandroid backup?
Click to expand...
Click to collapse
Sorry to resurrect this thread, I would really appreciate if anyone could share a nandroid backup. Phone not working. I appreciate the OTA's you shared, but I am note sure how to proceed from there. Nandroid would help.
Thanks in advance.
adem_7 said:
Sorry to resurrect this thread, I would really appreciate if anyone could share a nandroid backup. Phone not working. I appreciate the OTA's you shared, but I am note sure how to proceed from there. Nandroid would help.
Thanks in advance.
Click to expand...
Click to collapse
No luck dude,no one who has the vodap110 cid is willing to post a nandroid backup. I've been searching for months
@ckpv5
Did you not have backups for x.xx.166.x, or am I mistaken?
adem_7 said:
Sorry to resurrect this thread, I would really appreciate if anyone could share a nandroid backup. Phone not working. I appreciate the OTA's you shared, but I am note sure how to proceed from there. Nandroid would help.
Thanks in advance.
Click to expand...
Click to collapse
Are you running a rooted stock ROM when your phone now not working ? If yes, can you install TWRP recovery and make backup of the system part only. Then upload it for me, I'll try to fix it. I've done this many times with other rare ROM like WIND, Taiwan version, Optus, Telstra and many more.
If possible, just PM me the link.. this is the only way that I can help you and @dexterts
EddyOS said:
@ckpv5
Did you not have backups for x.xx.166.x, or am I mistaken?
Click to expand...
Click to collapse
No. I don't have because I can't find any version nandroid for x.xx.166.x anywhere out of XDA
That's why I'm asking these guys to help them
And if that @raynordg guy respond to notification ... he can help too. He was scared about his data on nandroid backup ... system partition has no user data.
ckpv5 said:
Are you running a rooted stock ROM when your phone now not working ? If yes, can you install TWRP recovery and make backup of the system part only. Then upload it for me, I'll try to fix it. I've done this many times with other rare ROM like WIND, Taiwan version, Optus, Telstra and many more.
If possible, just PM me the link.. this is the only way that I can help you and @dexterts
No. I don't have because I can't find any version nandroid for x.xx.166.x anywhere out of XDA
That's why I'm asking these guys to help them
And if that @raynordg guy respond to notification ... he can help too. He was scared about his data on nandroid backup ... system partition has no user data.
Click to expand...
Click to collapse
Guys,one question. If i buy sunshine and s-off my m8,than i could change my cid and flash for example .401 firmware and get ota updates as my phone was a regular htc international model? Sorry for the off topic
dexterts said:
Guys,one question. If i buy sunshine and s-off my m8,than i could change my cid and flash for example .401 firmware and get ota updates as my phone was a regular htc international model? Sorry for the off topic
Click to expand...
Click to collapse
Yes ... change CID and flash EU WWE RUU if you want it on .401
If only firmware, you can restore a EU WWE backup and do OTA .. but for now only lollipop the latest and there's already lollipop RUU, you can check EddyOS thread for RUU method : http://forum.xda-developers.com/showthread.php?t=2735235
I was hoping someone could help me with a problem I have.
My htc M8 was rooted and insertcoin was flashed onto it however the wifi button greyed out and wouldnt turn on in order to s-off it. I tried several different roms and they all have the same problem. I am currently running skydragon v5. I have been trying to sort this phone out for a week and I am getting absolutely nowhere so any help would be appreciated. It's on ORANG001 and is s-on.
Thanks
You have old firmware. You need to have 4.19.61.2 on ORANG001 in order to have wifi on these ROM.
And you post this in wrong section.
ckpv5 said:
You have old firmware. You need to have 4.19.61.2 on ORANG001 in order to have wifi on these ROM.
And you post this in wrong section.
Click to expand...
Click to collapse
Apologies, new to the forum it's been moved now!
Yeah .. requested it to be moved to correct section.
So .. you need to restore your stock ROM and do OTA up to 4.19.61.2
What's your current firmware version .. 3.33.61.9 or 2.26.61.1 ? Or even lower ?
Check what's written on bootloader - hboot 3.16 or 3.18 .. you need 3.19
ckpv5 said:
Yeah .. requested it to be moved to correct section.
So .. you need to restore your stock ROM and do OTA up to 4.19.61.2
What's your current firmware version .. 3.33.61.9 or 2.26.61.1 ? Or even lower ?
Check what's written on bootloader - hboot 3.16 or 3.18 .. you need 3.19
Click to expand...
Click to collapse
Hboot is 3.16.0.0000
The phone is currently in the bootloader and I can't get it to turn on to check the firmware version.
Ran getvar all does this help ? thanks for the help, I was stuck for over a week.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.15.2133156.UA13G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: **************
(bootloader) imei: ************
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: ORANG001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: ab0efa49
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.206s
That's a very low version ... you need to restore to stock backup 1.54.61.5
But I deleted my TWRP backup for most 1.xx.xxx.x only keep 2.x; 3x & 4x
There is someone else backup made with Philz recovery so you need to download Philz recovery - http://forum.xda-developers.com/showthread.php?t=2703223
then download the backup : https://mega.co.nz/#!WhwRmSoJ!QJxmI0gYj7t_0Hc4fMKx0XLYQ2n45S3OfrEcDRS3C-s
restore that backup with the stock recovery (included in that backup if I'm not wrong)
then do multiple OTA
ckpv5 said:
That's a very low version ... you need to restore to stock backup 1.54.61.5
But I deleted my TWRP backup for most 1.xx.xxx.x only keep 2.x; 3x & 4x
There is someone else backup made with Philz recovery so you need to download Philz recovery - http://forum.xda-developers.com/showthread.php?t=2703223
then download the backup : https://mega.co.nz/#!WhwRmSoJ!QJxmI0gYj7t_0Hc4fMKx0XLYQ2n45S3OfrEcDRS3C-s
restore that backup with the stock recovery (included in that backup if I'm not wrong)
then do multiple OTA
Click to expand...
Click to collapse
I have Philz Touch 6.26.6 clockwork mod v6.0.4.8
Will this be okay or do i need to install a different one ? sorry if these questions are stupid.
Should be ok ... good luck
I'll check your progress tomorrow or maybe someone will help you later.
Time to sleep ... good night
ckpv5 said:
Should be ok ... good luck
I'll check your progress tomorrow or maybe someone will help you later.
Time to sleep ... good night
Click to expand...
Click to collapse
Okay cheers for your help!
I was trying to adb push the firmware to my phone to then install it on Recovery but when im typing "adb devices" it says list of devices attached then it is blank. I have been trying to search for solutions but I cant seem to fix it. If you have any advice it would be much appreciated. Thanks
Has anyone got an idea?
paulmcclafferty said:
I was trying to adb push the firmware to my phone to then install it on Recovery but when im typing "adb devices" it says list of devices attached then it is blank. I have been trying to search for solutions but I cant seem to fix it. If you have any advice it would be much appreciated. Thanks
Click to expand...
Click to collapse
This is usually an issue on the computer's side (PC?). Try to re-install HTC drivers, try another USB port, or another cable. Also, if you have USB 3.0, this is known to cause issues with adb connectivity (apparently, you can disable this).
Also, you need to be booted into OS or in recovery for adb to work (does not work in bootloader) and you need to have USB debugging activated in Settings.
And when you say "firmware" I think you mean a nandroid backup, based on the instructions previously given to you? Be careful using the term "firmware" here, as most folks use that term to specifically mean the firmware.zip that contains hboot, radio etc. (but not ROM).
paulmcclafferty said:
I was trying to adb push the firmware to my phone to then install it on Recovery but when im typing "adb devices" it says list of devices attached then it is blank. I have been trying to search for solutions but I cant seem to fix it. If you have any advice it would be much appreciated. Thanks
Click to expand...
Click to collapse
Don't you have a MicroSD ? Put the extracted nandroid on MicroSD at the right location clockworkmod\backups\ is easier than doing that ADB push.
Okay finally got the nandroid backup installed. Then when i tried to install the OTA update it took me to CWM and failed. So i then relocked and tried again to update OTA and it took me to the bootloader with a ***Relocked*** and *** Security Warning*** any ideas ?
You need to re-install the stock recovery in order to OTA. Bootloader lock has nothing to do with it (will OTA with unlocked bootloader).
redpoint73 said:
You need to re-install the stock recovery in order to OTA. Bootloader lock has nothing to do with it (will OTA with unlocked bootloader).
Click to expand...
Click to collapse
I have installed the Nandroid backup mentioned above to stock i believe. Is this the correct step or is this still not stock ? it was 1.54.61.5
Thanks
paulmcclafferty said:
I have installed the Nandroid backup mentioned above to stock i believe. Is this the correct step or is this still not stock ? it was 1.54.61.5
Thanks
Click to expand...
Click to collapse
Stock ROM backup and stock recovery are two different things.
You need to fastboot flash recovery recovery.img to replace the CWM that you have now. Inside the backup zip, there is a recovery.img .. take this out and fastboot flash it.
You need to unlock bootloader to flash it.
when using the command "fastboot flash recovery recovery.img" using the recovery.img from the unzipped nandroid folder the process runs and it says okay with no errors then when i try go into recovery the red triangle and exclamation mark appear again
paulmcclafferty said:
when using the command "fastboot flash recovery recovery.img" using the recovery.img from the unzipped nandroid folder the process runs and it says okay with no errors then when i try go into recovery the red triangle and exclamation mark appear again
Click to expand...
Click to collapse
Yes that's stock recovery. Perform the ota now
Because that is stock recovery. You don't need to get into recovery.
Just reboot, check OTA, download then select install.
Let the system do the installation on its own
Hey everyone
The thing is that I was trying to return my phone to stock recovery to update my phone to Marshmallow and unroot it and I read this in another forum:"Boot your phone to TWRP recovery mode by turn off your phone then presses Vol up + Power to boot into bootloader then choose RECOVERY. There is a more simple way, by using “adb reboot recovery”.
Once came into TWRP main menu, now tap Mount -> Mount system then taps Home.
Tap Advanced -> File Manager, browse to “/system/xbin” folder. From there delete su, daemonsu or busybox if it exists. Also browse to “/system/app” the get rid of Superuser.apk."
So I followed these instructions and then when I rebooted the phone,it got stuck in bootloop. I can't turn it off now or get into the bootloader.
Android-HTC One M8
What can I do to have my phone again in stock recovery?
Thanks in advance
First of all if you rooted the rom this ain't going to work. You need a never rooted stock rom + recovery.
Hold power + volume up and switch to volume down when the screen turns black (do not let go of the power button) then you are in the BL. From there you go to the custom TWRP recovery.
Then you have to find a pure stock backup or a RUU that matches your OS/firmware number (if you haven't made one yourself), restore it and flash the stock recovery and you are done.
Mr Hofs said:
First of all if you rooted the rom this ain't going to work. You need a never rooted stock rom + recovery.
Hold power + volume up and switch to volume down when the screen turns black (do not let go of the power button) then you are in the BL. From there you go to the custom TWRP recovery.
Then you have to find a pure stock backup or a RUU that matches your OS/firmware number (if you haven't made one yourself), restore it and flash the stock recovery and you are done.
Click to expand...
Click to collapse
I flashed a stock recovery img,this is what I have now
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.26.21331147A1.16G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.24.709.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT51NWM00858
(bootloader) imei: 358716059354299
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: HTC__621
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: d5206dbc
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
From there I tried to flash the stock RUU 6.12.1540.4 and it always ends with error 155>UKNOWNERROR despite already relocked the device. Should I flash 4.24.709.3 RUU?
Also I try to get to the recovery menu but it only shows a phone with a red triangle,nothing else.
JPaul247 said:
I flashed a stock recovery img,this is what I have now
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.26.21331147A1.16G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.24.709.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT51NWM00858
(bootloader) imei: 358716059354299
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B11000
(bootloader) cidnum: HTC__621
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: d5206dbc
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
From there I tried to flash the stock RUU 6.12.1540.4 and it always ends with error 155>UKNOWNERROR despite already relocked the device. Should I flash 4.24.709.3 RUU?
Also I try to get to the recovery menu but it only shows a phone with a red triangle,nothing else.
Click to expand...
Click to collapse
You can't run the dev edition RUU at all as you are S-ON and have a different firmware. If you have the 709 RUU then try that indeed. But backup what you need because a RUU deletes EVERYTHING !
Mr Hofs said:
You can't run the dev edition RUU at all as you are S-ON and have a different firmware. If you have the 709 RUU then try that indeed. But backup what you need because a RUU deletes EVERYTHING !
Click to expand...
Click to collapse
So my steps would be S-OFF and from there download 4.24.709.3 RUU? with firmware you mean version-main, right?
Before all this mess I thankfully backed up everything I wanted
JPaul247 said:
So my steps would be S-OFF and from there download 4.24.709.3 RUU? with firmware you mean version-main, right?
Before all this mess I thankfully backed up everything I wanted
Click to expand...
Click to collapse
No S-OFF is NOT needed. just get the RUU with that version number indeed if it's even available. Then run it with a RELOCKED bootloader.
Mr Hofs said:
No S-OFF is NOT needed. just get the RUU with that version number indeed if it's even available. Then run it with a RELOCKED bootloader.
Click to expand...
Click to collapse
What if that version is not available?
JPaul247 said:
What if that version is not available?
Click to expand...
Click to collapse
Then you need a pure stock backup and restore it (usually done with the custom recovery TWRP)
Mr Hofs said:
Then you need a pure stock backup and restore it (usually done with the custom recovery TWRP)
Click to expand...
Click to collapse
I found a stock zip here in XDA,tried to flash it but it says this:
C:\Users\X\Desktop\HTC Fastboot\ADB and Fastboot>fastboot oem rebootRUU
...
(bootloader) Start Verify: 3
OKAY [ 0.011s]
finished. total time: 0.012s
C:\Users\X\Desktop\HTC Fastboot\ADB and Fastboot>fastboot flash zip firmware.zip
target reported max download size of 1826418688 bytes
load_file: could not allocate 1752557590 bytes
error: cannot load 'firmware.zip': Not enough space
Should I do a ramdump or something like that?
A stock back-up has to be unpacked and RESTORED with TWRP. No idea what you are doing now but i suggest to stop and read instructions first !
A stock zip can mean everything at this point.....where did you get it ?
Mr Hofs said:
A stock back-up has to be unpacked and RESTORED with TWRP. No idea what you are doing now but i suggest to stop and read instructions first !
A stock zip can mean everything at this point.....where did you get it ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
I will then install twrp again and try the stock backup
Mr Hofs said:
A stock back-up has to be unpacked and RESTORED with TWRP. No idea what you are doing now but i suggest to stop and read instructions first !
A stock zip can mean everything at this point.....where did you get it ?
Click to expand...
Click to collapse
I can't push an adb sideload for the firmware.zip nor adb push it.
for the adb sideload says cannot read *sideload* . Any other way to push a .zip file into the phones sd card to mount it with twrp?
JPaul247 said:
I can't push an adb sideload for the firmware.zip nor adb push it.
for the adb sideload says cannot read *sideload* . Any other way to push a .zip file into the phones sd card to mount it with twrp?
Click to expand...
Click to collapse
I surrender with this .zip file.I will try to flash the custom rom Skydragon
JPaul247 said:
I surrender with this .zip file.I will try to flash the custom rom Skydragon
Click to expand...
Click to collapse
*While flashing got error MD5 file not found*
Did you even read the first posts on the backup thread.....how to do it all correctly ?
Mr Hofs said:
Did you even read the first posts on the backup thread.....how to do it all correctly ?
Click to expand...
Click to collapse
This is getting stressful,I want my phone back (thanks for replying everything,every step is one closer I hope) I think I read the correct post
http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
I am getting all recoveries and everything from there.I download them and try to apply them via push.I think didn't visit this backup thread you are talking of.
JPaul247 said:
This is getting stressful,I want my phone back (thanks for replying everything,every step is one closer I hope) I think I read the correct post
http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
I am getting all recoveries and everything from there.I download them and try to apply them via push.I think didn't visit this backup thread you are talking of.
Click to expand...
Click to collapse
There is no push, there is no ADB ... he said many times ... read post #1 to understand how-to ...
Basic
Install TWRP 2.8.7.0
Extract the downloaded 4.24.709.3_ckpv5.zip on your PC
Copy the 4.24.709.3 folder to TWRP backup directory
In TWRP select restore
Install 4.24.709.3 stock recovery
Reboot ... OTA... done.
Details - read throughly post #1 all the 14 steps.
Make note or maybe a flow chart that you can understand
Thanks for the reply.I will read everything again
JPaul247 said:
This is getting stressful,I want my phone back (thanks for replying everything,every step is one closer I hope) I think I read the correct post
http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
I am getting all recoveries and everything from there.I download them and try to apply them via push.I think didn't visit this backup thread you are talking of.
Click to expand...
Click to collapse
I did it thank you very much I truly don't know how to thank you more for replying and helping me
ckpv5 said:
There is no push, there is no ADB ... he said many times ... read post #1 to understand how-to ...
Basic
Install TWRP 2.8.7.0
Extract the downloaded 4.24.709.3_ckpv5.zip on your PC
Copy the 4.24.709.3 folder to TWRP backup directory
In TWRP select restore
Install 4.24.709.3 stock recovery
Reboot ... OTA... done.
Details - read throughly post #1 all the 14 steps.
Make note or maybe a flow chart that you can understand
Click to expand...
Click to collapse
Thank you so much for answering I did it
Hi guys,
After a lot of reading and searching without any luck, this seems the last resort for me. This is the problem.
A week ago or so, I got the marshmallow update on my Phone, htc one m8s. Before this update, i managed to do a custom recovery and root etc. Then I heard about the update and installed an RUU again, restoring the Phone back to stock (renamed RUU zip to 0PKVIMG and copied that into my sd card; after that the stock recovery went all fine).
After the marshamallow update, I tried to do custom recovery again. Somehow it didnt work and i couldnt get the custom recovery working. It flashed fine, booted the img, but wouldnt start the recovery. I tried different varriants of twrp etc. Nothing worked. So that is problem number 1.
The second problem is, dat I think is that I have used a wrong version of recovery boot. Now the Phone wont start after the bootlogo.
The third is, that I cant install stock again, using the method above. I am getting the message; device halted due to large image (...) etc.
Can someone help me please? I would just be happy getting back to stock and be able to use my device again.
Thank you in advance.
Here is my device info:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.10.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: (deleted)
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8ql_ul
(bootloader) platform: hTCBmsm8939
(bootloader) modelid: 0PKV10000
(bootloader) cidnum: HTC__031
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 0b9a12e3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
(bootloader) mfg-name: 0001
First - edit & delete the imei no. from your post.
Your problem is more or less is the same as this one - http://forum.xda-developers.com/htc...-one-m8-wont-update-boot-to-recovery-t3385874
Read thru that thread .. the only difference is you need to find 2.10.401.1 firmware.zip
Check http://forum.xda-developers.com/htc-one-m8/one-m8s-general/make-custom-recovery-htc-one-m8s-t3114245 to see whether you can find the 2.10.401.1 firmware.zip there
* I requested moderator to move your thread to M8s section.
ckpv5 said:
First - edit & delete the imei no. from your post.
Your problem is more or less is the same as this one - http://forum.xda-developers.com/htc...-one-m8-wont-update-boot-to-recovery-t3385874
Read thru that thread .. the only difference is you need to find 2.10.401.1 firmware.zip
Check http://forum.xda-developers.com/htc-one-m8/one-m8s-general/make-custom-recovery-htc-one-m8s-t3114245 to see whether you can find the 2.10.401.1 firmware.zip there
* I requested moderator to move your thread to M8s section.
Click to expand...
Click to collapse
Thanks for your reply! I changed the info.
I really canty find the 2.10.401.1 firmware.zip for m8s. I can find for m9 etc. So I am stuck here. Maybe you know where to find it?
Thanks in advance!
You can find it in the 2nd link that I gave above. It's an OTA zip, you need to extract out the firmware.zip from the 2.10.401.1 OTA.
I can help to upload for you so you don't need to download the whole 1.2 gb OTA for a few mb firmware.zip but you have to wait when I'm home in next 3 hours.
ckpv5 said:
You can find it in the 2nd link that I gave above. It's an OTA zip, you need to extract out the firmware.zip from the 2.10.401.1 OTA.
I can help to upload for you so you don't need to download the whole 1.2 gb OTA for a few mb firmware.zip but you have to wait when I'm home in next 3 hours.
Click to expand...
Click to collapse
Thank you! I managed to flash it via sdcard.
Now I want to do a custom recovery and root the device. What would be the right recovery for this device and how can I check that myself in the future?
Thanks in advance.
Faiq said:
Thank you! I managed to flash it via sdcard.
Now I want to do a custom recovery and root the device. What would be the right recovery for this device and how can I check that myself in the future?
Thanks in advance.
Click to expand...
Click to collapse
Great that you fixed your main problem.
About custom recovery and how to root I think it's best you check the thread that I linked earlier - http://forum.xda-developers.com/htc-one-m8/one-m8s-general/make-custom-recovery-htc-one-m8s-t3114245
Reason is I don't have this device, only M8 not M8s.
Main thing is use only recovery meant for M8s which you can find a few versions there and install SuperSU.zip that you can get from here : http://forum.xda-developers.com/showthread.php?t=1538053
ckpv5 said:
Great that you fixed your main problem.
About custom recovery and how to root I think it's best you check the thread that I linked earlier - http://forum.xda-developers.com/htc-one-m8/one-m8s-general/make-custom-recovery-htc-one-m8s-t3114245
Reason is I don't have this device, only M8 not M8s.
Main thing is use only recovery meant for M8s which you can find a few versions there and install SuperSU.zip that you can get from here : http://forum.xda-developers.com/showthread.php?t=1538053
Click to expand...
Click to collapse
Thanks dude, you helped me out a lot with this. My Phone is working now with custom recovery and rooted. Just one last question, so I can finally rest my case.
So getting back to stock, is just flashing the whole OTA file again via sd card i.e. 0PKVIMG or flashing it with fastboot, with the instructions u mentioned above right? Doest it matter whether the devices is unlocked and do i have to flash stock recovery again? or flashing the firmware does the work to gain stock recovery again?
Faiq said:
So getting back to stock, is just flashing the whole OTA file again via sd card i.e. 0PKVIMG or flashing it with fastboot, with the instructions u mentioned above right? Doest it matter whether the devices is unlocked and do i have to flash stock recovery again? or flashing the firmware does the work to gain stock recovery again?
Click to expand...
Click to collapse
No ... that's wrong.
You should have made a non-rooted stock nandroid backup with the custom recovery before you root it. Just restore the backup and install stock recovery to return to stock.
Anyway .. maybe later, there will be RUU for your version. Always check that thread of RUU collection.