HELP I can't connect via usb and keep getting waiting for device
Please help
borretje said:
HELP I can't connect via usb and keep getting waiting for device
Please help
Click to expand...
Click to collapse
Have you got HTC Sync installed on your PC with correct drivers?
Go here ... http://www.htc.com/www/software/htc-sync-manager/ and download + install the software & then try again.
If you are still having problems, post back with what O/S you have on your computer/what it is you are trying to do? Also, some details on the phone might help like is it stock/custom rom? Are you trying to connect from CWM or from Android? etc
Cheers,
Ian
Related
Hello
I've O2 XDA Exec, and i was trying to update the rom, i download the latest rom from o2.co.uk. During upgrade it first detected the rom version etc.. correct but then suddenly in the middle of upgrade it said it cannot connect to the PDA and since then it is in bootloader mode, as soon as i switch it on or if i plugin the USB cable it goes into bootloader mode, please guide what should i do now? How it fix it again? I don't mind even having it back up on old rom, but i need to get it fixed.
Please guide
Greets
Kapil
funtoosh said:
Hello
I've O2 XDA Exec, and i was trying to update the rom, i download the latest rom from o2.co.uk. During upgrade it first detected the rom version etc.. correct but then suddenly in the middle of upgrade it said it cannot connect to the PDA and since then it is in bootloader mode, as soon as i switch it on or if i plugin the USB cable it goes into bootloader mode, please guide what should i do now? How it fix it again? I don't mind even having it back up on old rom, but i need to get it fixed.
Please guide
Greets
Kapil
Click to expand...
Click to collapse
You can reload from the bootloader mode. The problem you have faced is often due to a defective USB cable. Please direcly connect to the original USB cable (not through hub). Before connecting open active sync on desktop go to File/Connecting and uncheck allow usb connection check box.
Please read this:
http://wiki.xda-developers.com/inde...tion On How To Upgrade with Bootloader method
Hello
Thanks for trying ot help, but it was VISTA giving the problem, i fixed it as per instructions on:
http://forum.xda-developers.com/showthread.php?t=291723
Thanks again.
Greets
My Universal is dead, will only get into bootloader when plugged into the mains, not usb.
Any ideas?
Hey guys,
I am facing this prob. for quite some time. Whenever I use flashtool and connect my Xperia Arc in flash mode, the computer hangs without any warning and I jus have to restart it. FlashTool says that drivers for the device is not correctly installed.
Pl. help me with regard to this.
I am presently running CyanogenMod 9 Nightly version.
Flashtool: 0.9.8.0
Awaiting your reply
Epic Fail, Wrong Forum............................................................................................................Reportet.
reinstall driver , format your computer ??
And please note that here Development Forum
pls post it to right place -____-
Don't be so mean. Have you ever got into despair when having a problem? Have you though that the forum name is not the most relevant one? By the way, where should a question like this be posted?!
TO answer the question... it is not easy so solve. You will need to clean your PC of all possible traces of old drivers. To do that, with the phone disconnected, go to Device Manager on PC (google if you don't know how). Then, remove any possible references to your phone using the information from here: http://technet.microsoft.com/en-us/magazine/ff184583.aspx
After that, install Sony PC Sync software. Follow the steps. At the end, it should tell you that you should connect phone.
Everything should work now (your phone will be finally re-discovered).
Before you do that, also try to disable Debugging on the phone and set the PC connection to MTP.
Good Luck!
okty2k said:
By the way, where should a question like this be posted?!
Click to expand...
Click to collapse
Preferably on the flashtool thread, failing that the Q&A section, after trying to solve the issue instead of creating a new thread/post after the first failed attempt at something.
Sent from my CM9'd Ray
Try reinstalling drivers from flash tool/drivers
amulbaby said:
Hey guys,
I am facing this prob. for quite some time. Whenever I use flashtool and connect my Xperia Arc in flash mode, the computer hangs without any warning and I jus have to restart it. FlashTool says that drivers for the device is not correctly installed.
Pl. help me with regard to this.
I am presently running CyanogenMod 9 Nightly version.
Flashtool: 0.9.8.0
Awaiting your reply
Click to expand...
Click to collapse
first, you start with fresh windows install, after install flash tools
rod555 said:
first, you start with fresh windows install
Click to expand...
Click to collapse
Bit extreme unless all else fails.
or you try with one Virtual machine... Vmware
Hi
When I connect my sgn2 to my PC it just charges and nothing else happens I tried reinstalling the samsung drivers and I installed the latest version of KIES and still nothing.
When I go to download mode odin does recognize it and I can flash anything.
Please help me I want to backup my EFS folder ASAP.
GuyDroid said:
Hi
When I connect my sgn2 to my PC it just charges and nothing else happens I tried reinstalling the samsung drivers and I installed the latest version of KIES and still nothing.
When I go to download mode odin does recognize it and I can flash anything.
Please help me I want to backup my EFS folder ASAP.
Click to expand...
Click to collapse
well these had been an issue with lot of note2 its the usb point which had gone bad so u need to change it as this had been an issue with many and the solution came to that only i solved mine the same way
shhbz said:
well these had been an issue with lot of note2 its the usb point which had gone bad so u need to change it as this had been an issue with many and the solution came to that only i solved mine the same way
Click to expand...
Click to collapse
If the port on my gn2 is bad then how do you explain that odin can recognize it and even flash anything
GuyDroid said:
If the port on my gn2 is bad then how do you explain that odin can recognize it and even flash anything
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1711009 have u tried this and just get SAMSUNG_USB_Driver 1.5.23.0 and nothing else no kies required when installing driver just skip the update and it should work and search for a code to enable mtp as I forgot it to enable the mode which I tried that time.
I tried all and trust me the solution was changing usb port on the phone keep finger crossed and hope it works for you that way.
Hey guys !
I've encountered a strange problem with my HOX.
ADB won't recognize my phone when it's connnected via usb.(it does, when I do this OTA way via wifi), everything else works, fastboot DOES recognize my phone and I can also transfer files.
I definitely know it's a driver problem but, ... I tried it the old way when I installed HTC Sync so the right drivers are installed but when I do this, my pc stops recognizing the phone completely.
tl;dr. If I have no HTC drivers installed I can transfer files and see my phone but can't use ADB. If I install them via HTC Sync or using a separated installer I can't see my phone at all.
Can someone provide me with the right drivers ?
btw. I'm using WIN 8.1 64bit.
Thanks
saker10 said:
Hey guys !
I've encountered a strange problem with my HOX.
ADB won't recognize my phone when it's connnected via usb.(it does, when I do this OTA way via wifi), everything else works, fastboot DOES recognize my phone and I can also transfer files.
I definitely know it's a driver problem but, ... I tried it the old way when I installed HTC Sync so the right drivers are installed but when I do this, my pc stops recognizing the phone completely.
tl;dr. If I have no HTC drivers installed I can transfer files and see my phone but can't use ADB. If I install them via HTC Sync or using a separated installer I can't see my phone at all.
Can someone provide me with the right drivers ?
btw. I'm using WIN 8.1 64bit.
Thanks
Click to expand...
Click to collapse
Hi! try those drivers...
let me know if they work...
lukes91 said:
Hi! try those drivers...
let me know if they work...
Click to expand...
Click to collapse
They did for me. Thanks!
jurrabi said:
They did for me. Thanks!
Click to expand...
Click to collapse
Nice :good:
Sent from here
Hi Guys
I need install custom Rom for my device GT-i9192 by odin .. But Not responding
Even open files are not responding
Knowing that I tried other devices and worked without problems
Just my device.
When connect it to my computer. Not responding
Please reply ,,,
Please help me ...
azoga said:
Hi Guys
I need install custom Rom for my device GT-i9192 by odin .. But Not responding
Even open files are not responding
Knowing that I tried other devices and worked without problems
Just my device.
When connect it to my computer. Not responding
Please reply ,,,
Please help me ...
Click to expand...
Click to collapse
probably a usb driver issue, download latest and reinstall
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
IronRoo said:
probably a usb driver issue, download latest and reinstall
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
Click to expand...
Click to collapse
My brother tried another device... No problems connecting with PC ..
I think the problem is on my device GT-I9192 ..
azoga said:
My brother tried another device... No problems connecting with PC ..
I think the problem is on my device GT-I9192 ..
Click to expand...
Click to collapse
possible could still be driver.
However there are lots of things it could be, I can't remember them all soul here are random things I recall, no particular order! People have reported using different usb cable, or usb port (your phone may be more sensitive than your bothers) have helped. And/or try older ver of Odin (2.8 or 2.9 I think it was). Make sure to turn off Kies & your fire wall. Only connect phone once in download mode. Turn off debugging. Update uninstall Kies (might need to reinstall drivers if they come with Kies)
(try Heimdall if you can use linux)
Also, what recovery are you using? TWRP from neozone thread? ver?