Would appreciate if anyone could help
Bought a brand new Galaxy S III from T-Mobile, a week ago. On the same day I rooted it, using these instructions galaxys3root dot com/galaxy-s3-root/how-to-root-t-mobile-galaxy-s3-sgh-t999/. . . Worked out great.
Then I used this ROM called Deodexed_Debloated_T999UVALEM, and that worked out fine.
Today I decided to use this rom: Criskelo_6.0.1_Stock_XXBLG9_ota
And while it was installing, it asked for an update file, which I did not have.. So I chose the option to reboot the phone. Since then the phone has been practically dead, and here are the symptoms:
1. The phone does not power up, in any mode
2. When connected to the pc, pc cannot recognize it
3. Installed Kies, and drivers, nothing changed
4. Plugged to the charger, and nothing changed
5. Removed the batter for over an hour and repeated the above and nothing changed
Does anyone know what I can to salvage this phone?
Thank you
Rekhter said:
Would appreciate if anyone could help
Bought a brand new Galaxy S III from T-Mobile, a week ago. On the same day I rooted it, using these instructions galaxys3root dot com/galaxy-s3-root/how-to-root-t-mobile-galaxy-s3-sgh-t999/. . . Worked out great.
Then I used this ROM called Deodexed_Debloated_T999UVALEM, and that worked out fine.
Today I decided to use this rom: Criskelo_6.0.1_Stock_XXBLG9_ota
And while it was installing, it asked for an update file, which I did not have.. So I chose the option to reboot the phone. Since then the phone has been practically dead, and here are the symptoms:
1. The phone does not power up, in any mode
2. When connected to the pc, pc cannot recognize it
3. Installed Kies, and drivers, nothing changed
4. Plugged to the charger, and nothing changed
5. Removed the batter for over an hour and repeated the above and nothing changed
Does anyone know what I can to salvage this phone?
Thank you
Click to expand...
Click to collapse
Looks like you flashed a ROM for I9300.
Can you get into download mode?
Hold down and home key while restarting phone.
Rekhter said:
Would appreciate if anyone could help
Bought a brand new Galaxy S III from T-Mobile, a week ago. On the same day I rooted it, using these instructions galaxys3root dot com/galaxy-s3-root/how-to-root-t-mobile-galaxy-s3-sgh-t999/. . . Worked out great.
Then I used this ROM called Deodexed_Debloated_T999UVALEM, and that worked out fine.
Today I decided to use this rom: Criskelo_6.0.1_Stock_XXBLG9_ota
And while it was installing, it asked for an update file, which I did not have.. So I chose the option to reboot the phone. Since then the phone has been practically dead, and here are the symptoms:
1. The phone does not power up, in any mode
2. When connected to the pc, pc cannot recognize it
3. Installed Kies, and drivers, nothing changed
4. Plugged to the charger, and nothing changed
5. Removed the batter for over an hour and repeated the above and nothing changed
Does anyone know what I can to salvage this phone?
Thank you
Click to expand...
Click to collapse
The problem here is that you flashed an International rom onto a T-Mobile Galaxy S3. The only solution I could think of would be to flash back to stock using Kies but that isn't really possible unless the phone is able to go into download mode.
zer0trip said:
Can you get into download mode?
Hold down and home key while restarting phone.
Click to expand...
Click to collapse
This
But you will hold the Volume down + Home + Power button Don't let go until your in download mode
Jigga0o7 said:
The problem here is that you flashed an International rom onto a T-Mobile Galaxy S3. The only solution I could think of would be to flash back to stock using Kies but that isn't really possible unless the phone is able to go into download mode.
Click to expand...
Click to collapse
Thank you for your response, unfortunatley it is not doing anything, it is not restarting in any modes.
Got any suggestions?
You just hard bricked your phone!!! :/ damn that sucked!!!!
Sent from my SGH-T999 using xda premium
cybrnook said:
This
But you will hold the Volume down + Home + Power button Don't let go until your in download mode
Click to expand...
Click to collapse
I held all three buttons down for over 3 minutes, nothing happened. Should I try it for longer?
Rekhter said:
I held all three buttons down for over 3 minutes, nothing happened. Should I try it for longer?
Click to expand...
Click to collapse
No , shouldn't take more than 10 seconds.
Sorry to hear that man, but in the future PLEASE RESEARCH before you get flash happy. International version of the GSIII has completely different hardware inside.
You need to stick to T-Mobile GSIII roms, or don't flash them at all. Might be a good candidate for stock rooted, or no root at all.
Pull battery. Put battery back in and hold Vol down, home and power, until it vibrates, then let power go but hold the other two until download mode comes up.
Flashing different carrier ROMs and kernels will result in hard bricking your phone!!! Only flash ROMs and kernals that is for your phone model!!!
Sent from my SGH-T999 using xda premium
The downfall of getting Flash Happy and just throwing anything at it you think you can...
stevessvt said:
Pull battery. Put battery back in and hold Vol down, home and power, until it vibrates, then let power go but hold the other two until download mode comes up.
Click to expand...
Click to collapse
Tried that again. Removed the battery, held all three down for 2 minutes straight, no vibration. screen black, nothing happening :-/
dannydv said:
Flashing different carrier ROMs and kernels will result in hard bricking your phone!!! Only flash ROMs and kernals that is for your phone model!!!
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Dude you are more drama than gurls. Relax @op worst case scenario u will have to buy a jtag $3 on ebay and problem solved but first do some search and try possible solutions that worked for other users.
Alarmmy said:
It is time to call Tmobile or Samsung for warranty exchange.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
Quite sure this is not covered under warranty.
---------- Post added at 10:26 PM ---------- Previous post was at 10:26 PM ----------
lazarat said:
Dude you are more drama than gurls. Relax @op worst case scenario u will have to buy a jtag $3 on ebay and problem solved but first do some search and try possible solutions that worked for other users.
Click to expand...
Click to collapse
JTAG ftw
dannydv said:
Flashing different carrier ROMs and kernels will result in hard bricking your phone!!! Only flash ROMs and kernals that is for your phone model!!!
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
not entirely true. At&t roms an kernels work with the T-Mobile s3. Don't remember if any others do.
Sent from my SGH-T999 using Tapatalk 2
I haven't seen one for 3 bucks but you definitely need the JTAG.
mustk1ll20 said:
not entirely true. At&t roms an kernels work with the T-Mobile s3. Don't remember if any others do.
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Yup... we CAN in fact flash kernels and att roms... its modems/radios from other carriers that shouldn't be flashed. We can also flash some sprint and verizon roms, but as they are CDMA it'll take some more advance modding, to get them to run full and proper... probably a little over the OP's head, but just saying.
Still alls not lost, look into Jtag as others have suggested...
If u hard brickd your phone the $5 usb dongle JTAG will not unbrick it! You need to send it in for a jtage reflash!
Sent from my SGH-T999 using xda premium
dannydv said:
If u hard brickd your phone the $5 usb dongle JTAG will not unbrick it! You need to send it for jtage reflash!
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Any suggestions on where I can get this done?
Related
I just bricked my rooted T989. Nothing happens when I hit power (no display) and my PC does not show the drives when I connect via USB. I have tried vol buttons + power (with battery and [no battery + cable]). Does anyone have any ideas as to what I should try next? Is TMO likely to replace/repair my phone even though it had been rooted?
Have you tried getting into download mode? And what caused the brick?
Sent from my SGH-T989 using xda premium
I was flashing a new ROM and it bricked when it finished flashing. It just never rebooted. I can't get into download mode.
TomSilverSpring said:
I was flashing a new ROM and it bricked when it finished flashing. It just never rebooted. I can't get into download mode.
Click to expand...
Click to collapse
What rom did you flash?
Sent from my Hercules using XDA App
This is really embarassing but I somehow stumbled up WickedRom, which is for the I9100, somehow thought it was for T989, and tried to flash it. Obviously a major league screw up. I have requested a replacement from TMO. I just hope they don't hit me with a major financial penalty if Samsung notices that it has been rooted (it was rooted when I tried flashing WickedRom).
TomSilverSpring said:
This is really embarassing but I somehow stumbled up WickedRom, which is for the I9100, somehow thought it was for T989, and tried to flash it. Obviously a major league screw up. I have requested a replacement from TMO. I just hope they don't hit me with a major financial penalty if Samsung notices that it has been rooted (it was rooted when I tried flashing WickedRom).
Click to expand...
Click to collapse
Same thing happened here... I was odining back to stock and the power in my office at work went out... total fail. All Black, no power button, battery pull or Jig will make the phone do anything... anyone find a work around for this... I did this to my VIB before and was able to get it to work again but this just feels bad. Any help is appreciated. Los Angeles area dev's feel free to come play with it.
hey i know im new here but i got the answer... u need 2 odin back 2 stock 4 download mode pull battery plug usb into computer then 2 phone hold vol up and trackpad then insert battery and u will be in download mode also if using CWM dont fix permissions and also dont forget 2 place unzipped recovery file in /system/bin folder and overwrite it over existing file also make sure that cache, data, sdcard ,and system are all unmounted in mounts option of recovery took me 3 days of flashin back 2 stock with odin and soft bricking my phone 2 figure this out hope it helps
http://forum.xda-developers.com/showthread.php?t=1358401
perhaps people should have shown a bit more support?
Your fault !
Damn that sounds bad, big mistake on your part though, differentiating between i9100 and T-989 is key, among the other models too.
Mine did the same thing after doing a backup. I'm in the 30 day grace period and I'm gonna try to take it back in.. Hopefully I get away with it unless I find a way to fix it
blakemoo said:
Same thing happened here... I was odining back to stock and the power in my office at work went out... total fail. All Black, no power button, battery pull or Jig will make the phone do anything... anyone find a work around for this... I did this to my VIB before and was able to get it to work again but this just feels bad. Any help is appreciated. Los Angeles area dev's feel free to come play with it.
Click to expand...
Click to collapse
The power going out Iz the biggest fail ever....definitely my biggest fear and always in back of my head while using odin
Sent from my SGH-T989 using xda premium
TomSilverSpring said:
This is really embarassing but I somehow stumbled up WickedRom, which is for the I9100, somehow thought it was for T989, and tried to flash it. Obviously a major league screw up. I have requested a replacement from TMO. I just hope they don't hit me with a major financial penalty if Samsung notices that it has been rooted (it was rooted when I tried flashing WickedRom).
Click to expand...
Click to collapse
my brother did this exact same thing to our neighbors phone, flashed a I9100 rom into a T989 phone and now it wont turn on at all. unfortunately dont have warranty or insurance. whats the fix to this? will the jig work? or is the phone an expensive paper weight? thanks for any help.
http://www.youtube.com/watch?v=zN7le4GmxZs&feature=youtube_gdata_player
Sent from my SGH-T989 using xda premium
h0use gr00ves said:
my brother did this exact same thing to our neighbors phone, flashed a I9100 rom into a T989 phone and now it wont turn on at all. unfortunately dont have warranty or insurance. whats the fix to this? will the jig work? or is the phone an expensive paper weight? thanks for any help.
Click to expand...
Click to collapse
Only way is to send it to Samsung or get it JTAG. JTAG will probably be cheaper.
I was trying to go back to 2.3.x using ODIN after I installed the KP8 (update for a "leaked" ics) on my phone. Now my computer won't read the phone on download mode. Anyone have a fix for this?
Or do you know if that USB JIG will fix it?
that was not for our phone....malciado....jtag is your only fix
sent from the near past
Yea..... GSM + CDMA = your screwed
There is no leak for ICS for our phones yet.
So you flashed the GSM version.
2 options:
Sprint insurance
or
buy a new phone
No one has been successful at jtag, I wouldn't even waste my time.
kthejoker20 said:
Yea..... GSM + CDMA = your screwed
There is no leak for ICS for our phones yet.
So you flashed the GSM version.
2 options:
Sprint insurance
or
buy a new phone
No one has been successful at jtag, I wouldn't even waste my time.
Click to expand...
Click to collapse
Not even with the USB JIG? No one has tried it?
Its been tried and unsuccessful
sent from the near past
Sigh. Add one more to the list of bricked phones due to flashing an ICS leak meant for the International SGS2. As said above, your only option is to send the phone to JTAG if you want to use it again.
Sent from my SPH-D710 using Tapatalk
So what's the head count up to? 30s?
sent from the near past
I'm screwed. I flashed this phone to Cricket so no insurance. And I doubt Samsung will warranty it if though it has a clean esn with Sprint right?
Can anyone vouch for this?
/watch?v=mjZ7gVK-IE8
youtube video
I wish we all knew how to read
tkemack said:
I wish we all knew how to read
Click to expand...
Click to collapse
What is that suppose to mean?
malcriiado said:
I'm screwed. I flashed this phone to Cricket so no insurance. And I doubt Samsung will warranty it if though it has a clean esn with Sprint right?
Click to expand...
Click to collapse
Look up JTAG on Google. I believe they charge $50 for unbricking service. You'll be out of a phone for awhile, but it's not like the phone is going to do you any good in its current state anyways.
Good luck.
Sent from my SPH-D710 using Tapatalk
Dchibro said:
Look up JTAG on Google. I believe they charge $50 for unbricking service. You'll be out of a phone for awhile, but it's not like the phone is going to do you any good in its current state anyways.
Good luck.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Yea bro just placed my order from Mobile Tech Videos i'll post up how everything went to help others out with this problem. Good thing I kept my EVO for backup
I can vouch that nothing will work. I had someone send me theirs to try and,I installed drivers through Kies, got drivers from XDA, tried a USB jig, hard reset, my SD card with Mobile Odin on it, etc, etc, etc. If when you hold volume up and power and you have the green Android guy holding a box and your phone says I9100, its jtag or nothing. I spent a week (about an hour a day) trying everything. If your phone powers on but you can't connect to wifi or SD card isn't recognized and no network is found, don't even waste your time. I tried because I hoped I could pull it off with the help of some of the great minds from around here but it just wouldn't be recognized by Odin....and it does beep when I plug it into my laptop....so close yet so far
Sent from my SPH-D710 using xda premium
JohnCorleone said:
I can vouch that nothing will work. I had someone send me theirs to try and,I installed drivers through Kies, got drivers from XDA, tried a USB jig, hard reset, my SD card with Mobile Odin on it, etc, etc, etc. If when you hold volume up and power and you have the green Android guy holding a box and your phone says I9100, its jtag or nothing. I spent a week (about an hour a day) trying everything. If your phone powers on but you can't connect to wifi or SD card isn't recognized and no network is found, don't even waste your time. I tried because I hoped I could pull it off with the help of some of the great minds from around here but it just wouldn't be recognized by Odin....and it does beep when I plug it into my laptop....so close yet so far
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
That Volume Up + Power does work. So you haven't looked into Mobile Tech Vids' method?
malcriiado said:
That Volume Up + Power does work. So you haven't looked into Mobile Tech Vids' method?
Click to expand...
Click to collapse
If you have a link great. If not I will search in the am. It gets sent back to owner. As soon as I am about to send back another idea pops up
Sent from my Nexus S 4G using xda premium
malcriiado said:
Yea bro just placed my order from Mobile Tech Videos i'll post up how everything went to help others out with this problem. Good thing I kept my EVO for backup
Click to expand...
Click to collapse
Josh is good. You are in good hands
Sent from my SPH-D710 using Tapatalk
I flashed my wife's phone and ended up with this same issue. I tried everything with no success. Luckily the phone was within the 14 day period and was able to return it and get a replacement.
Just told them the battery would not last 4 HRS, it was fully stock besides the bootloader.
Odin wouldn't recognize it but the pc would. Tried mobile Odin, tried flashing anything and everything, nothing would work.
Sent from my SPH-D710 using xda premium
malcriiado said:
What is that suppose to mean?
Click to expand...
Click to collapse
Deleted post. Now responding with *sigh*
Let me get one more in just to cover the 101st thread we'll have on this by Friday. *sigh*
KCRic said:
Deleted post. Now responding with *sigh*
Let me get one more in just to cover the 101st thread we'll have on this by Friday. *sigh*
Click to expand...
Click to collapse
Asking for help not helpless remarks, if want to keep doing that I also live in Kansas City just in case you want to keep goin at it. Let's keep these forums full of usefull tools not full of useless comments.
I restored my phone to stock then made a backup using CMW. I placed the CWM back up in the original_update folder of the android kitchen. Then went into the android kitchen and deodexed, rooted and intalled busy box. Then i built the rom, signed it, placed it on my SD, card booted into recovery, flashed SuperWipe then flashed the rom I made. It installed fine and booted up but i didn't have any signal. So i let it sit for about 5 minutes then Powered off my phone but it stayed at the Good Buy screen for like ten minutes so i pulled the battery, when i tried to boot it back up it wouldn't do any thing. I held the power button down and nothing happened. I tried plugging in a usb cable and my phone still would't do anything Its completely unresponsive
Any suggestions?
mattbradfo said:
I restored my phone to stock then made a backup using CMW. I placed the CWM back up in the original_update folder of the android kitchen. Then went into the android kitchen and deodexed, rooted and intalled busy box. Then i built the rom, signed it, placed it on my SD, card booted into recovery, flashed SuperWipe then flashed the rom I made. It installed fine and booted up but i didn't have any signal. So i let it sit for about 5 minutes then Powered off my phone but it stayed at the Good Buy screen for like ten minutes so i pulled the battery, when i tried to boot it back up it wouldn't do any thing. I held the power button down and nothing happened. I tried plugging in a usb cable and my phone still would't do anything Its completely unresponsive
Any suggestions?
Click to expand...
Click to collapse
I sadly did the same thing. I'm still trying to figure out what I did wrong in the kitchen to brick my phone. Mine powered up as well but upon restart it bricked. But its sad to say but its bricked. I did a warranty exchange. If you connect the phone to the computer it will register as qhsusb_dload and not an Android phone. Best of luck.
Sent from my SGH-T989 using XDA
TheTechNiq said:
I sadly did the same thing. I'm still trying to figure out what I did wrong in the kitchen to brick my phone. Mine powered up as well but upon restart it bricked. But its sad to say but its bricked. I did a warranty exchange. If you connect the phone to the computer it will register as qhsusb_dload and not an Android phone. Best of luck.
Sent from my SGH-T989 using XDA
Click to expand...
Click to collapse
Unfortunately I don't have a contract with T-Mobile so i can't do a warranty exchange. I ordered the USB Jig and i'm gunna see if that fixes it, if not I guess it's just a paper weight :\
mattbradfo said:
Unfortunately I don't have a contract with T-Mobile so i can't do a warranty exchange. I ordered the USB Jig and i'm gunna see if that fixes it, if not I guess it's just a paper weight :\
Click to expand...
Click to collapse
I hate to be the bearer of bad news but if its registering as a ghsusb_dload device, a jig won't work.....how do I know you may ask? Cause I tried that as well before the exchange. Haha. Good news is you can pay someone to jtag your device. I think its like 50-100 but way better than 600 for a new phone. You should be able to find the link around the forums somewhere.
Sent from my SGH-T989 using XDA
The kitchen is not always good. The guy that did visionary would custom make roms for you. You need something like that
Sent from my SGH-T989 using xda premium
Try this video on how to unbrick Samsung Galaxy S2. Its worth a try.
Hope the video helped.
techfanatic9 said:
Try this video on how to unbrick Samsung Galaxy S2. Its worth a try.
Hope the video helped.
Click to expand...
Click to collapse
Like I told you before, it doesn't work for hard bricks. If it says qhusb, it's done and needs jtag
techfanatic9 said:
Try this video on how to unbrick Samsung Galaxy S2. Its worth a try.
Hope the video helped.
Click to expand...
Click to collapse
Ya, my phone won't go into download mode. I'm just gunna have to send it to get J-taged
Send it back to Samsung that's what I did it has 1 year warranty
Try it just call Samsung they don't check if is brick
they just fix it they take like 2 weeks and is free
if sending it back to samsung dont work out for you, let me know. if all else fails, I have a riffbox, we can work something out.
Yayodroid said:
if sending it back to samsung dont work out for you, let me know. if all else fails, I have a riffbox, we can work something out.
Click to expand...
Click to collapse
Ok, sounds good i'll check with samsung
ok, keep us updated. or pm or something lol
Ok, good news samsung says they'll fix it!
sweet! what did you tell them? that it just stopped working all of a sudden?
Yayodroid said:
sweet! what did you tell them? that it just stopped working all of a sudden?
Click to expand...
Click to collapse
I just told them it was unresponsive and that it would't turn on. They didn't even ask if I rooted it
xcrazydx said:
Like I told you before, it doesn't work for hard bricks. If it says qhusb, it's done and needs jtag
Click to expand...
Click to collapse
Like I said
Sent from my SGH-T989 using XDA
mattbradfo said:
I just told them it was unresponsive and that it would't turn on. They didn't even ask if I rooted it
Click to expand...
Click to collapse
Good bro. Be careful this, time around
Sent from my SGH-T989 using XDA
have a sprint galaxy s 3 here.
someone tried to flash an international rom therefor flashing the gsm stuff.
i cant access download mode at all however i did install the QHSUSB_drivers.
now with odin 3.07 the .com box will not light up however on previous versions of odin for ex odin v1.85 the .com box will light. im trying to flash the cdma bootloader for the sprint version and it doesnt fail just hangs at setup connection.
any ideas?
vabeachfc3s said:
have a sprint galaxy s 3 here.
someone tried to flash an international rom therefor flashing the gsm stuff.
i cant access download mode at all however i did install the QHSUSB_drivers.
now with odin 3.07 the .com box will not light up however on previous versions of odin for ex odin v1.85 the .com box will light. im trying to flash the cdma bootloader for the sprint version and it doesnt fail just hangs at setup connection.
any ideas?
Click to expand...
Click to collapse
Have you tried following the steps on this thread http://forum.xda-developers.com/showthread.php?t=1727171 ? Also they may be able to help you out more than the QA section.
Edit: Sorry posted the wrong link.
yes ive tried that way.
any ideas welcome
did you switch to download mode/
3. Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.
^^^^He cannot get to dl mode it is hard bricked.
And to the op-
Unlike some devices where this was a savior it is worthless to us. You are hard bricked. Go get some jtag as this mode won't help you
I tried for a few days to talk to this phone in that mode.Using everthing from odin to cdma workshop to qpst to emma. Nothing will do it trust me
It was a customer phone i dont brick phones.
Sent from my Galaxy Nexus using xda app-developers app
vabeachfc3s said:
It was a customer phone i dont brick phones.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
At least its not urs then. Well be happy ur not the owner of a shiny doorstop and let the customer know its a paperweight and they need JTAG.:good:
All he have to do is call Samsung and they will replace it you have a year factory warranty as long as theres no physical damage. They send the phone fast. I did it four times already don't waste your time looking for solution just tell them it won't boot just turned off and won't start that's all i said. You don't have to have insurance either.
Sent from my SPH-L710 using XDA Premium App
bonebeatz1234 said:
All he have to do is call Samsung and they will replace it you have a year factory warranty as long as theres no physical damage. They send the phone fast. I did it four times already don't waste your time looking for solution just tell them it won't boot just turned off and won't start that's all i said. You don't have to have insurance either.
Sent from my SPH-L710 using XDA Premium App
Click to expand...
Click to collapse
Really? You've done this four times? I'd be interested in if anyone else has had such luck? Seems like they would try to turn on the device or figure out whats wrong when they get it back. Thats awesome though!
thatisandwas said:
Really? You've done this four times? I'd be interested in if anyone else has had such luck? Seems like they would try to turn on the device or figure out whats wrong when they get it back. Thats awesome though!
Click to expand...
Click to collapse
I can vouch for that cause I've had to swap out my 1st. Maybe not due to that particular reason, but still, if it doesn't light up they gets frustrated and swap time.
Sent from my SPH-L710 using xda premium
bonebeatz1234 said:
All he have to do is call Samsung and they will replace it you have a year factory warranty as long as theres no physical damage. They send the phone fast. I did it four times already don't waste your time looking for solution just tell them it won't boot just turned off and won't start that's all i said. You don't have to have insurance either.
Sent from my SPH-L710 using XDA Premium App
Click to expand...
Click to collapse
I used to have an Epic 4G Touch and yesterday accidentally flashed a kernel for it on my S3. I was left with a beautiful pebble blue coffee table piece. I started to freak out because I couldn't power on or anything. Long story short, I purchased my phone less than 14 days ago so I took it back to the store. The technician took a look at it, couldn't power it on and they gave me a replacement phone, no questions asked!!
I promise if you hard bricked hell or even soft bricked you can get it exchanged from Samsung as long as it's been less than a year and no water damage or cracked screen .I really think they don't look into all the rooting stuff they just install new software in the phone and send it right back out to someone else which works for me.
If you go threw your carrier avoid it they ask to much question call Samsung and i sware they will send you a new or refurbished phone but a working one and that's all you can ask for and i didn't pay a dime the box they send you to send your phone is prepaid by them i just put my bricked phone in there then dropped it off to ups. I will say this two times i wasn't at home and ups left the damn phone in the box right on my door step than goodness no one stole it.
Sent from my SPH-L710 using XDA Premium App
My S3 won't boot after attempting to install custom rom thru CWM. I tried to enter into the recovery mode by pressing Volume Up and Home, Power button but it doesn't even turn on!! I even tried holding down Volume Down and Home Power and it doesn't even turn on. It doesn't even go into the Logo screen....
Help please!!!
Need more info on what you installed. Sounds hard bricked though.
Sent from my SGH-T999 using xda premium
mt3g said:
Need more info on what you installed. Sounds hard bricked though.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Agreed-
Try pulling the battery and waiting a few seconds, then try to reboot. I did something while installing a rom and the phone booted but just showed a black screen but I didn't realize it.
It does help to know exactly what it was you tried to flash.
Sent from my SGH-T999 using xda app-developers app
luige007 said:
My S3 won't boot after attempting to install custom rom thru CWM. I tried to enter into the recovery mode by pressing Volume Up and Home, Power button but it doesn't even turn on!! I even tried holding down Volume Down and Home Power and it doesn't even turn on. It doesn't even go into the Logo screen....
Help please!!!
Click to expand...
Click to collapse
Joy!
What rom did you flash...be specific...and where did you find it from?
Do you have TMobile PHP? If you do then you can get a replacement S3 for $5 from TMobile customer care. That is probably the easist way to fix this issue.
Sent from my SGH-T999 using xda premium
brandonmaze said:
Joy!
What rom did you flash...be specific...and where did you find it from?
Do you have TMobile PHP? If you do then you can get a replacement S3 for $5 from TMobile customer care. That is probably the easist way to fix this issue.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
I flashed it with the Omega ROM with the I9300 version thinking that my phone was that same model. Very dumb on my part .
Sadly I don't have PHP.
Would a JIG help my phone reboot to the download state?
luige007 said:
I flashed it with the Omega ROM with the I9300 version thinking that my phone was that same model. Very dumb on my part .
Sadly I don't have PHP.
Would a JIG help my phone reboot to the download state?
Click to expand...
Click to collapse
Yep a jig would send u into download mode. I'm pretty sure from there u can use Odin, if I'm not mistakened.
Sent from my SGH-T999 using xda app-developers app
i did the same damn thing
:crying::crying:
luige007 said:
I flashed it with the Omega ROM with the I9300 version thinking that my phone was that same model. Very dumb on my part .
Sadly I don't have PHP.
Would a JIG help my phone reboot to the download state?
Click to expand...
Click to collapse
luige007 said:
I flashed it with the Omega ROM with the I9300 version thinking that my phone was that same model. Very dumb on my part .
Sadly I don't have PHP.
Would a JIG help my phone reboot to the download state?
Click to expand...
Click to collapse
Jig won't help only a jtag fix. Here you go.
http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
gulbir101 said:
Yep a jig would send u into download mode. I'm pretty sure from there u can use Odin, if I'm not mistakened.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Sent from my SGH-T999 using xda app-developers app
same problm
i am having same problem with my micromax A 54 did u get any solution for your phone............
In hindsight im watching you guys do just what I did two weeks ago.. To save u time ITS BRICKED for sure .Jtag service fixed me right up, hes very professional as well.mobiltechvideos.com
Set up a repair send phone off takes a week.
Watch very very closely what you flash.If unsure dont do it, or youll be spending 60 $ to jtag everytime you do this.
Sent from my SGH-T999 using xda app-developers app
lojak29 said:
In hindsight im watching you guys do just what I did two weeks ago.. To save u time ITS BRICKED for sure .Jtag service fixed me right up, hes very professional as well.mobiltechvideos.com
Set up a repair send phone off takes a week.
Watch very very closely what you flash.If unsure dont do it, or youll be spending 60 $ to jtag everytime you do this.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
And you got mad when people told you exactly that.
Sent from my SGH-T999 using xda premium
lojak29 said:
In hindsight im watching you guys do just what I did two weeks ago.. To save u time ITS BRICKED for sure .Jtag service fixed me right up, hes very professional as well.mobiltechvideos.com
Set up a repair send phone off takes a week.
Watch very very closely what you flash.If unsure dont do it, or youll be spending 60 $ to jtag everytime you do this.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
You do know this thread is from last year, right?
|When Emotion Goes Up, Logic Goes Down|
|Even If You Fall Face First You're Still Moving Forward|
same problem but a lilltle bit different
i installed jellyblast custom romon galaxy y(s5360) and it worked well.
later i installed some apps and an psp emulater named(ppsspp) downloaded from google play.
and downloaded a game for that ppsspp and tried to play. and it got stuck in the settings so i restarted the phone (by holding power key 11 sec)
it just showing its logo but not starting .....what to do???
plz be urgent...:crying::crying::crying::crying:
re: reboot
shiva4ulove said:
i installed jellyblast custom romon galaxy y(s5360) and it worked well.
later i installed some apps and an psp emulater named(ppsspp) downloaded from google play.
and downloaded a game for that ppsspp and tried to play. and it got stuck in the settings so i restarted the phone (by holding power key 11 sec)
it just showing its logo but not starting .....what to do???
plz be urgent...:crying::crying::crying::crying:
Click to expand...
Click to collapse
Reboot into recovery mode and wipe cache, dalvik cache and do a factory reset in recovery.
Do NOT wipe/format system.
Then reboot the phone and it should work fine.
help
okay i have the same exact problem. i tried to flash darkyrom iii from androidgeeks.com or something like that, and, i also didn't see that it was for the i9300 only and it went through the little setup process from within cwm (like its own little installer) all steps went fine and everything. asked if i wanted to reboot, i touched "no" then the installer closed and brought me back to cwm and cwm decided to just reboot my phone on its own anways. now im waiting for it to boot, nothing. research, take the battery out along with the sim and sd for about 45 minutes. nothing. i plug it into the computer and nothing happens. i take out the battery and plug it into the computer, again to no prevail. so with the battery out and the phone plugged into the computer, i hold power, home and volume down and a red led comes on the phone and the computer makes the "attatched device" sound. but isnt recognized by kies or odin. will a jig help me out at all?
*edit* i got the rom from here; android.gs/update-galaxy-s3-darkyrom-android-4-1-2-jelly-bean/
re: flashing 9300 rom
majidjaccion said:
okay i have the same exact problem. i tried to flash darkyrom iii from androidgeeks.com or something like that, and, i also didn't see that it was for the i9300 only and it went through the little setup process from within cwm (like its own little installer) all steps went fine and everything. asked if i wanted to reboot, i touched "no" then the installer closed and brought me back to cwm and cwm decided to just reboot my phone on its own anways. now im waiting for it to boot, nothing. research, take the battery out along with the sim and sd for about 45 minutes. nothing. i plug it into the computer and nothing happens. i take out the battery and plug it into the computer, again to no prevail. so with the battery out and the phone plugged into the computer, i hold power, home and volume down and a red led comes on the phone and the computer makes the "attatched device" sound. but isnt recognized by kies or odin. will a jig help me out at all?
*edit* i got the rom from here; android.gs/update-galaxy-s3-darkyrom-android-4-1-2-jelly-bean/
Click to expand...
Click to collapse
You are about about the 50th person in the past couple months who done the same thing, flashing a 9300 rom.
The only way to get the phone back into proper working condition is to send it off to be Jtag'ed.
There are some very good deals on Jtag if you go to eBay and search for "JTAG Galaxy S3".
Good Luck!
thank you
Misterjunky said:
You are about about the 50th person in the past couple months who done the same thing, flashing a 9300 rom.
The only way to get the phone back into proper working condition is to send it off to be Jtag'ed.
There are some very good deals on Jtag if you go to eBay and search for "JTAG Galaxy S3".
Good Luck!
Click to expand...
Click to collapse
ahh thats what i was afraid of.. im gonna check a couple local places first with fingers crossed before shipping it off though. have you personally sent one in to any of those ebay services?
re: jtag
majidjaccion said:
ahh thats what i was afraid of.. im gonna check a couple local places first with fingers crossed before shipping it off though. have you personally sent one in to any of those ebay services?
Click to expand...
Click to collapse
Nope, I never had a need to. But I have read here in XDA that people do get excellent service at a good price at eBay.
Misterjunky said:
Nope, I never had a need to. But I have read here in XDA that people do get excellent service at a good price at eBay.
Click to expand...
Click to collapse
hmmm... i was leading into my next queston which would have been; is there any specific seller you may have read about or saw somewhere that i should go to? cause, for me, ebay is a little... "ehhhhh.." you know what i mean? plus on top of that im sending in my phone so i just want to make sure everything is from a trusted source.