Dear all,
I kindly ask you to support with the recovery of my GT-I8150 !
I was using the CyanogenMod 9 since weeks and try to back to my carrier official ROM.
The wonder won't starup after this, it's show the samsung logo then the annimation and the samsung logo ...annimation...
Any idea freinds?
Many thanks in advance.
Amine
medamine60 said:
Dear all,
I kindly ask you to support with the recovery of my GT-I8150 !
I was using the CyanogenMod 9 since weeks and try to back to my carrier official ROM.
The wonder won't starup after this, it's show the samsung logo then the annimation and the samsung logo ...annimation...
Any idea freinds?
Many thanks in advance.
Amine
Click to expand...
Click to collapse
Solved with the flashwith a "non one package version " rom
Thanks all
medamine60 said:
Solved with the flashwith a "non one package version " rom
Thanks all
Click to expand...
Click to collapse
hi, i do have the same problems, but what i did is different with yours, here what i did
- flash cwm
- boot into recovery mode
- wipe cache and dalvik
- and voila!!!
just sharing
Related
Hi i have tried to install EHNDROIX 12.11.10 today and saw that all version of ehndroix's after reboot from cwm it says unfortunately system ui,youtube,gmail etc... closed can you help me please where am i wrong ?
winsson said:
Hi i have tried to install EHNDROIX 12.11.10 today and saw that all version of ehndroix's after reboot from cwm it says unfortunately system ui,youtube,gmail etc... closed can you help me please where am i wrong ?
Click to expand...
Click to collapse
no, you are not wrong, but the files are not ready for our galaxy W
my advice, you should read at least the latest comments/posts on last page before you install any rom
because we reported "Force Closed on Start up" already before you write this post
bennymax said:
I think you must wait for a fix: the last release 121110 is not ready... others italian members have had FC
we are waiting for a fix
I think this is dued from ported galaxy S version: this is not originary done for galaxy W
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1850859&page=12
If you have nandroid backup from your previous ROM, you can revert back and waiting the dev fix this bug
thanks for your advices i will wait for compatible files and thanks for good work!...
winsson said:
thanks for your advices i will wait for compatible files and thanks for good work!...
Click to expand...
Click to collapse
you're welcome, mate
Keep searching and reading, you'll find what you want
Hello,
I have european HTC wildfire S Unlocked
And I installed Rom wildchild version 3.3
Now I would like to change it for CM 10
I used Clockworkmod 5.0.2.8 for instaled a new rom from SD card, and at the and I have a message "succesfully instal from SD ".
But when I reboot my phone I have white screen with HTC in green and the screen stay freez.:crying:
I must return on wildchid version for have a working rom on my phone, do you have an idea for help me ?
Thank you
Install stock ROM u el get it sure
Sent from my HTC Wildfire S A510e using xda app-developers app
Sathra said:
Hello,
I have european HTC wildfire S Unlocked
And I installed Rom wildchild version 3.3
Now I would like to change it for CM 10
I used Clockworkmod 5.0.2.8 for instaled a new rom from SD card, and at the and I have a message "succesfully instal from SD ".
But when I reboot my phone I have white screen with HTC in green and the screen stay freez.:crying:
I must return on wildchid version for have a working rom on my phone, do you have an idea for help me ?
Thank you
Click to expand...
Click to collapse
First of all, post in the correct section, please.
Quite sure that your Wildfire S is a 2012 one.
Go to this post.
Following are the instructions to install.
operator 3 said:
Our colleague from 4PDA Isset aka Epmak, present a new kernel for CM.
It is based on universal kernel Cyanogenmod 7/9/10 I AOKP I Paranoid Android 2.54 V2.1 of eoghan2t7
In kernel is fixed SOC version and display driver.
Installation:
1. Install 2012+CWM+Recovery+5.0.2.8.
2. Make from CWM:
- backup and restore -> Backup
- wipe data/factory reset
- advanced -> wipe dalvik cache
- mounts and storage -> format boot
- mounts and storage -> format system
3. Install Cyanogenmod ROM as desired.
4. Immediately install, attached kernel from CWM.
Kernel is tested on JK1.2; JK1.3 and JDroid.
Thanks and congratulations to Isset/Epmak
MD5 Sum: 25240d7a3f0e330aa65806bd28f09266
Click to expand...
Click to collapse
And hit the thanks button for these two, and me too if you want.
Lt. Win said:
First of all, post in the correct section, please.
Quite sure that your Wildfire S is a 2012 one.
Go to this post.
Following are the instructions to install.
And hit the thanks button for these two, and me too if you want.
Click to expand...
Click to collapse
Thank you for your help
Sorry for the bad section how can I move my thread in issue and question section ?
How can I be sure to have a 2011 or 2012 model ?
In phone parameters I haven't found this information.
Sathra said:
Thank you for your help
Sorry for the bad section how can I move my thread in issue and question section ?
How can I be sure to have a 2011 or 2012 model ?
In phone parameters I haven't found this information.
Click to expand...
Click to collapse
Click the triangle in the OP and ask the moderator to move the thread.
How to find out which model it is:
1. When did you buy the phone? (Quite obvious)
2. CM ROMs don't boot up, stuck at White HTC logo inspite of full and correct wipe.
Sent from my HTC Wildfire S A510e using Tapatalk 2
Lt. Win said:
Click the triangle in the OP and ask the moderator to move the thread.
How to find out which model it is:
1. When did you buy the phone? (Quite obvious)
2. CM ROMs don't boot up, stuck at White HTC logo inspite of full and correct wipe.
Sent from my HTC Wildfire S A510e using Tapatalk 2
Click to expand...
Click to collapse
I bought this phone in june 2012
I tried your adviced steps for instal it and now my phone work on CM10
Thank you very much for your patience and you help :good:
I think the issue has been solved by the support kernel.
Hi guys, i just wanna share a port of sphinx lu6200 to su640...
Credits to Chandat who make this port possible and Sphinx team.
Sphinx v4.1 - https://docs.google.com/file/d/0B9QjytlJAivgcnlYdnNoV3RPeXM/edit
mirror:
http://www.4shared.com/zip/pPYea87g/SphinX_V41_Odex_Port_For_SU640.html?
Sphinx v4.1 minor updates(this is mandatory) flash this after you install.
http://www.4shared.com/zip/j-y8fyhi/Update_SphinX_V41.html
For more details about this rom, you may check this one to know what the features inside.
http://forum.xda-developers.com/showthread.php?t=2413125
Can this be ported to p930
Sent from my LG-P930 using xda app-developers app
Hutch89 said:
Can this be ported to p930
Sent from my LG-P930 using xda app-developers app
Click to expand...
Click to collapse
I've tried to port it. I used boot.img and etc folder from miroslav unofficial 4.1. My phone doesn't boot, stucked on optimus lte screen. Maybe it's wrong boot, if i know right, i shouldn't see optimus lte logo on p930. Is it right?
Also tried a few boot.img more, no one had succes to boot my nitro
http://sphinx.vn/:laugh::good::cyclops::D
http://lgviet.com/forum/threads/su640-sphinx-v4-port-for-su640.2231/
Can anyone help PLS??
Looks an amazing mixture of different ROMs and mods available out there.. includes some features from LG Opt Pro and G2 as well.. Can someone please port this ROM to our beloved Nitro HD .... PLEASE
reddevil_sen said:
Looks an amazing mixture of different ROMs and mods available out there.. includes some features from LG Opt Pro and G2 as well.. Can someone please port this ROM to our beloved Nitro HD .... PLEASE
Click to expand...
Click to collapse
Nitro and spectrum..
Sent from my VS920 4G using Tapatalk 2
secure boot unsuccessful
coming from CM 10.1, I flashed Sphinx v 4.1 rom but it gives secure boot unsuccessful error. Any reason ? also please note it is not giving any cause.
PES 2012 is not working! Any solution please. Thanks
Sent from my LG-SU640 using XDA Premium 4 mobile app
no body using sphinx 4.1 ???
I feel nobody is trying Sphinx 4.1 on SU640. No comments for the last so many days. any review available ?
Where are all of you? No reply no post from anybody!
Sent from my LG-SU640 using xda premium
Is there anyone who can confirm why its not booting up on my SU640? I am currently running Sphinx v3 supercharge v6.
Sent from my LG-SU640 using xda premium
bootloop
alpinotheoriginal said:
Is there anyone who can confirm why its not booting up on my SU640? I am currently running Sphinx v3 supercharge v6.
Sent from my LG-SU640 using xda premium
Click to expand...
Click to collapse
i have the bootloop issue also , anyone knows how to fix this
h69pc said:
i have the bootloop issue also , anyone knows how to fix this
Click to expand...
Click to collapse
This is NOT bootloop, below my way installation
_Reboot to recovery CWM: factory format, wipe cache, wipe davik, wipe battery
_Install the zip rom
_Run factory format after flashed the rom again
_Reboot phone
At the first boot, it boot very very long, my case is 10 minutes. Also at first boot, device very slow and lag. Don't setup network or Gmail account.
Just try Next, Next, Skip; and then forget it about 5 minutes
Reboot your phone, after reboot second time, you can config your setting
Again reboot and enjoy
Remember: very long time and lag at first boot, please do'n worry about that, just relex by a cup coffe or tea!
killed said:
This is NOT bootloop, below my way installation
_Reboot to recovery CWM: factory format, wipe cache, wipe davik, wipe battery
_Install the zip rom
_Run factory format after flashed the rom again
_Reboot phone
At the first boot, it boot very very long, my case is 10 minutes. Also at first boot, device very slow and lag. Don't setup network or Gmail account.
Just try Next, Next, Skip; and then forget it about 5 minutes
Reboot your phone, after reboot second time, you can config your setting
Again reboot and enjoy
Remember: very long time and lag at first boot, please do'n worry about that, just relex by a cup coffe or tea!
Click to expand...
Click to collapse
i have done that but after flashing the rom and rebooting , the phone just alternates between lhe lg lte logo and the lg logo......
in your instructions do you flash the rom twice?
h69pc said:
i have done that but after flashing the rom and rebooting , the phone just alternates between lhe lg lte logo and the lg logo......
in your instructions do you flash the rom twice?
Click to expand...
Click to collapse
My apology, if you can see the LG logo only, your device exact bootloop. Please reflash your phone by stock rom (KDZ flie with flash tool which run direct on Computer)
If your phone flash this rom success, you will see 5 circle with 5 colors and logo Spinx
In my instruction, i just flash 1 time, but before also after flashed rom, i will factory reser. Please try it again my friend, now i typing my answer via this rom: SphinX V4.1
Good luck to you!
Get any question or need any Help just ask here
Cheers
[ARC/S] VanirAOSP [official] [nightlies] [4.4.2] [anzu]
[coconut] [MAR05] VanirAOSP 4.4.2 | Unofficial
[Neo/Neo V][KK] VanirAOSP [unofficial] [4.4.2] [haida/hallon]
Regards!
hello. I'm testing your ROM, follow all the steps and when I do the first reboot, the cell remains in the kernel logo ...
PS: I waited 15 or 20 minutes and nothing, the cell does not turn
Flash also rihgt kernel
Jmendza said:
hello. I'm testing your ROM, follow all the steps and when I do the first reboot, the cell remains in the kernel logo ...
PS: I waited 15 or 20 minutes and nothing, the cell does not turn
Click to expand...
Click to collapse
U must flash the provided kernel as @robgie said using flastool or cmd
Cheers
3andala said:
U must flash the provided kernel as @robgie said using flastool or cmd
Cheers
Click to expand...
Click to collapse
I use the kernel in the zip and still the same
Jmendza said:
I use the kernel in the zip and still the same
Click to expand...
Click to collapse
thats odd ok tell me your device
name of zip & size last what u do
Cheers
3andala said:
thats odd ok tell me your device
name of zip & size last what u do
Cheers
Click to expand...
Click to collapse
well, I have an Xperia NEO (hallon) the zip is "vanir_hallon_4.4.2.031714" I have changed kernel and still does not pass the logo of the kernel, I went back to download the zip but the Haida and worked well, weird no?
Jmendza said:
well, I have an Xperia NEO (hallon) the zip is "vanir_hallon_4.4.2.031714" I have changed kernel and still does not pass the logo of the kernel, I went back to download the zip but the Haida and worked well, weird no?
Click to expand...
Click to collapse
sorry for that i don't have the device @saatvik2012 maybe help u as he told me he tested and works perfect & he built it from the source
3andala said:
sorry for that i don't have the device @saatvik2012 maybe help u as he told me he tested and works perfect & he built it from the source
Click to expand...
Click to collapse
right! thanks for replying! Haida install the rom with the patch of the camera, so far everything works great. Thanks for sharing your ROM
Greetings! :victory:
Jmendza said:
right! thanks for replying! Haida install the rom with the patch of the camera, so far everything works great. Thanks for sharing your ROM
Greetings! :victory:
Click to expand...
Click to collapse
then please send link of the camera patch
3andala said:
then please send link of the camera patch
Click to expand...
Click to collapse
of course! give all the credit to @deccen90 to do the patch. I'll just send up a mirror of your patch
Thank you for ROM but there is a little bug that crashes launcher if apps are installed on SD card and you connect to PC via MSC.
Also i cant end call, must wait for other person to end it.
after i install the rom the touchscreen doesn't work >>>>>> xperia arc
How to change the image of an incoming call on a phone like this:
Thanks for the reply
I like it heihei!
any procedure to save /boot before flashing a new kernel ?
Hi,
Thanx for the good work, I love your rom.
I understood that since 04/04 the kernel used is a unstable one.
I tried to install the build from 04/04, 05/04 and 07/04 with each time the same result : kernel freeze with color noise screen, not even kernel logo.
So, I revert to 30/03 build and it's ok.
I understand that I could help by flashing the unstable kernel and sending you the dmesg output.
But I'm afraid loosing all (bricked phone or I do'nt know what)...
Is there any procedure to easily "save" my current /boot to resotre it after the test ?
Looking for a good Rom to my Arc S
kkk6 said:
Looking for a good Rom to my Arc S
Click to expand...
Click to collapse
This is good (30/03 build )
I have a problem port SystemUl especially the battery icon with the Xperia Z2. I changed a few things in SystemUl.apk but nothing works.
Maybe another application is responsible for the battery icon
Any ideas
I use build 01.04 for Arc / S
[Q] cosmicCM 4.0 &4.1 getting stuck on Samsung logo after flash with philltz recovery
dear friends i am noob for the forum and my first question i need your help as when i flash cosmic cm v4.0 and 4.1 with phillz touch cwm recovery in galaxy grand it gets stuck at Samsung logo previously i was on cyanozenmod 11 rom please help me. I've wiped data cache delvik cheche already but no luck. Thanks in advance.
Same thing for me.don't know why
say2sumit said:
dear friends i am noob for the forum and my first question i need your help as when i flash cosmic cm v4.0 and 4.1 with phillz touch cwm recovery in galaxy grand it gets stuck at Samsung logo previously i was on cyanozenmod 11 rom please help me. I've wiped data cache delvik cheche already but no luck. Thanks in advance.
Click to expand...
Click to collapse
sharky.desire said:
Same thing for me.don't know why
Click to expand...
Click to collapse
Try using the latest version of Philz Recovery. Or use the Recovery mentioned in ROMs OP. Hope you guys are flashing after a full data wipe.
Sent from my GT-I9082 using XDA Premium 4 mobile app
DMJoh said:
Try using the latest version of Philz Recovery. Or use the Recovery mentioned in ROMs OP. Hope you guys are flashing after a full data wipe.
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I am using ClockworkMod recovery with SELinux support,other roms work just fine,this one dosen't.
sharky.desire said:
I am using ClockworkMod recovery with SELinux support,other roms work just fine,this one dosen't.
Click to expand...
Click to collapse
Do a Factory Reset from recovery before and after installation of ROM...If that doesn't work then use recovery mention in OP...
Download k2wl latest kernel and flash
Sent from my GT-I9082 using xda premium
rom getting boot with k2wl kernel v1.7.6 but no dual sim data setting found.
jackeagle said:
Do a Factory Reset from recovery before and after installation of ROM...If that doesn't work then use recovery mention in OP...
Click to expand...
Click to collapse
Thanks for your valuable suggestion my problem has resolve today,by flashing k2wl kernel v1.7.6
Previously i was flashing v1.7.9 and 1.7.8 but prob. Not solved now i am happy to get this rom but found another problem that i can not change data setting for both sim as in other dual sim kitkat rom for our grand duos . Please give a clue for it. Previous version of this rom had this facility. Thanks in advance:good::good:
say2sumit said:
Thanks for your valuable suggestion my problem has resolve today,by flashing k2wl kernel v1.7.6
Previously i was flashing v1.7.9 and 1.7.8 but prob. Not solved now i am happy to get this rom but found another problem that i can not change data setting for both sim as in other dual sim kitkat rom for our grand duos . Please give a clue for it. Previous version of this rom had this facility. Thanks in advance:good::good:
Click to expand...
Click to collapse
Press The THANKS button coz it means a lot to us... The dual sim problem is already informed to developer and he said he will look into it... see here http://forum.xda-developers.com/sho...&highlight=dual+sim+data+setting#post52609871