Hi i have tried to install EHNDROIX 12.11.10 today and saw that all version of ehndroix's after reboot from cwm it says unfortunately system ui,youtube,gmail etc... closed can you help me please where am i wrong ?
winsson said:
Hi i have tried to install EHNDROIX 12.11.10 today and saw that all version of ehndroix's after reboot from cwm it says unfortunately system ui,youtube,gmail etc... closed can you help me please where am i wrong ?
Click to expand...
Click to collapse
no, you are not wrong, but the files are not ready for our galaxy W
my advice, you should read at least the latest comments/posts on last page before you install any rom
because we reported "Force Closed on Start up" already before you write this post
bennymax said:
I think you must wait for a fix: the last release 121110 is not ready... others italian members have had FC
we are waiting for a fix
I think this is dued from ported galaxy S version: this is not originary done for galaxy W
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1850859&page=12
If you have nandroid backup from your previous ROM, you can revert back and waiting the dev fix this bug
thanks for your advices i will wait for compatible files and thanks for good work!...
winsson said:
thanks for your advices i will wait for compatible files and thanks for good work!...
Click to expand...
Click to collapse
you're welcome, mate
Keep searching and reading, you'll find what you want
Related
Q&A for [OTA] romBUZZ v1.4 -October 17
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [OTA] romBUZZ v1.4 -October 17. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
how to install new OTA updates?
i am actually new to all this stuff n i loved your rom! i wanna know how to install the OTA updates that you've given..please give step wise instructions.....and it it enough to download the lastest version only or all the versions should be downloaded?
please reply asap. thnx agn!
adi8837 said:
i am actually new to all this stuff n i loved your rom! i wanna know how to install the OTA updates that you've given..please give step wise instructions.....and it it enough to download the lastest version only or all the versions should be downloaded?
please reply asap. thnx agn!
Click to expand...
Click to collapse
hey! just install v1.1 and then using the ota service from the device, update it.
or else, download all the updates from the thread and install them
Please help
Do i need to download version 1.3 directly or first il have to download v1.0..?
apuhira93 said:
Do i need to download version 1.3 directly or first il have to download v1.0..?
Click to expand...
Click to collapse
1.1 > 1.3 > 1.4
only 1.1 is big in size
EDIT I meant 1.0 > 1.1 > 1.3 > 1.4 > 1.5
Only 1.0 is big.
query
bro i have stock 4.4 rom of gionee elife e3 i extracted system and boot image also .As canvas 4 has same chip,ram,storage,resolution can you tell me how to port rom
Simply awesome
I never wrote a review on xda but this build just made me do so.Its the best stable rom out there right now.I love this rom.Looking forward for stable kitkat rom from pranjal
bhargav.k said:
bro i have stock 4.4 rom of gionee elife e3 i extracted system and boot image also .As canvas 4 has same chip,ram,storage,resolution can you tell me how to port rom
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2701283
Basically google "rom port mtk guide"
naruto1997 said:
I never wrote a review on xda but this build just made me do so.Its the best stable rom out there right now.I love this rom.Looking forward for stable kitkat rom from pranjal
Click to expand...
Click to collapse
Thank you
Kitkat is a bit out of the reach as of now because of lack of the kernel source.
downloading error
Guys! I am trying to download pranjals rom namely rom buzz but i am unable to download it... Can any one send me a link to download plz...
I want to download v1.0
pranjal18 said:
http://forum.xda-developers.com/showthread.php?t=2701283
Basically google "rom port mtk guide"
Thank you
Kitkat is a bit out of the reach as of now because of lack of the kernel source.
Click to expand...
Click to collapse
No problem.Do you make note 3 roms?
bro i have the system and boot image of gionee but meta-inf not having how to get it from stock rom as updater-script is needed
aishwar98 said:
Guys! I am trying to download pranjals rom namely rom buzz but i am unable to download it... Can any one send me a link to download plz...
I want to download v1.0
Click to expand...
Click to collapse
link is working. I checked. You check again.
naruto1997 said:
No problem.Do you make note 3 roms?
Click to expand...
Click to collapse
not at the moment. But I think Note 3 rom has already been ported to this device.
bhargav.k said:
bro i have the system and boot image of gionee but meta-inf not having how to get it from stock rom as updater-script is needed
Click to expand...
Click to collapse
You do not have meta-inf and updater script right?
You will have to make your own updater script...depending upon in which partition your system, boot, etc are. Google these two and you will find proper guide threads.
Also, you can use (after editing) another rom's updater script. That rom should belong to your device.
pranjal18 said:
link is working. I checked. You check again.
not at the moment. But I think Note 3 rom has already been ported to this device.
Click to expand...
Click to collapse
No i mean roms that i can flash on note 3.
naruto1997 said:
No i mean roms that i can flash on note 3.
Click to expand...
Click to collapse
No. Not working on those
unable to install rombuzz on canvas 4
I have checked your post regarding RomBUZZ rom and download all version.But at the time of installing by CWM method,but it was showing "INSTALLATION ABORTED".
kindly guide me.
AS per your query version is 1.0 and "installation aborted " after the selection of "apply update from sdcard" and then the selection of the ROM zip file.Is there are any process for ROM flash directly from PC.
regards,
S.Mahapatra
smahapatra said:
I have checked your post regarding RomBUZZ rom and download all version.But at the time of installing by CWM method,but it was showing "INSTALLATION ABORTED".
kindly guide me.
AS per your query version is 1.0 and "installation aborted " after the selection of "apply update from sdcard" and then the selection of the ROM zip file.Is there are any process for ROM flash directly from PC.
regards,
S.Mahapatra
Click to expand...
Click to collapse
Are you using Master Awesome's CWM recovery? The background colour of recovery should be Grey. The link is present in post 1.
guys i flashed a self created rom got boot loop so tried to backup rombuzz rom but started imei issue so flashed stock imei issue still there so followed karthiks method and solved issue but whenever i flash new rom i get imei issue how to solve permanently
karthik's method is?
Notification and music/radio
Hello,
I found a bug: when i listen music or fm radio and a notification arrive : the music stops playing, the screen is black and the power button is disabled.
LED notification flashes but nothing more.
The only solution is to remove the battery and cut the next time connexion data
Otherwise it is one of the most successful ROM I've tested, thank you !
pranjal18 said:
karthik's method is?
Click to expand...
Click to collapse
i used sn write tools and got my imei number back bro but again i flashed a rom same issue
bro i made a rom elie e3 kitkat system and boot.img in kitchen it created updater script itself the rom shows installation complete but stuck at boot loop how to make a kitkat rom using system and boot.img of other stock rom
[Q&A] [GT-I9190/I9195][ROM][Official][5.0.2] CyanogenMod 12.0 Nightlies for S4 Mini
Q&A for [GT-I9190/I9195][ROM][Official][5.0.2] CyanogenMod 12.0 Nightlies for S4 Mini 3G/LTE
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [GT-I9190/I9195][ROM][Official][5.0.2] CyanogenMod 12.0 Nightlies for S4 Mini 3G/LTE. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Arco, I don't think you'll ever be thanked enough for all the work you have done for the S4 mini. I mean it. Many, many, many thanks and please keep it up for as long as you can because plenty of us appreciate what you're doing. I'm part of a big silent majority (longtime lurker of the XDA forums, never poster) and I've made this account just to tell you this.
Hi
This is awesome, firstly thanks to arco68 and Cm team and contributors for all this hard work.:good:
Id like to know has anyone experienced no-sound-in-call bug? and how is bluetooth audio these days?
How long does the first reboot?
I have already installed twice, but when I reboot is in the CM Logo boot more than 20 minutes does not start.
Did a clean install! And my recovery is the latest 6.0.5.1!
At this point I have not done reboot and is working, but when you? Until I'm afraid!
Does anyone have this problem?
MushyMan said:
Hi
This is awesome, firstly thanks to arco68 and Cm team and contributors for all this hard work.:good:
Id like to know has anyone experienced no-sound-in-call bug? and how is bluetooth audio these days?
Click to expand...
Click to collapse
Hi, I think BT audio is fixed but I can't confirm you about the car...
xuleca said:
How long does the first reboot?
I have already installed twice, but when I reboot is in the CM Logo boot more than 20 minutes does not start.
Did a clean install! And my recovery is the latest 6.0.5.1!
At this point I have not done reboot and is working, but when you? Until I'm afraid!
Does anyone have this problem?
Click to expand...
Click to collapse
Hi, your device has booted ?
Oijkn said:
Hi, your device has booted ?
Click to expand...
Click to collapse
First time YES, but if I reboot it's stuck in CM logo.
Did you check the md5 of your downloaded file perhaps it's bad ?
xuleca said:
How long does the first reboot?
Click to expand...
Click to collapse
The first boot loop animation lasted 12 minutes in my case. But I also installed a full stock gapps package, so I think it shouldn't be longer than that.
Oijkn said:
Did you check the md5 of your downloaded file perhaps it's bad ?
Click to expand...
Click to collapse
I check and checksum is ok
---------- Post added at 10:22 PM ---------- Previous post was at 10:20 PM ----------
puscasumarin said:
The first boot loop animation lasted 12 minutes in my case. But I also installed a full stock gapps package, so I think it shouldn't be longer than that.
Click to expand...
Click to collapse
And did you reboot after?
My first boot take some time but boot, the problem is when I reboot
Try to do a full wipe but with another recovery like Philz Touch and do a new clean install.
How can i disable the hardware button light up when i touch the screen? i only want them to light op when i touch the buttons.
Thanks in advance.
update
Hey! Will we get upates ofer the cm update( from setings ) or we have to flash every new build?
Thanks for suport!
Normally you can use the CM Update from the settings that work great !
But for my part I prefer to download it from my computer because sometime I've got an md5sum error if I download it from my phone (depend of your internet connection...).
Oijkn said:
Normally you can use the CM Update from the settings that work great !
But for my part I prefer to download it from my computer because sometime I've got an md5sum error if I download it from my phone (depend of your internet connection...).
Click to expand...
Click to collapse
SAme here one time
@ Daryl the light can.t be enabled only on toch the buttons .
xuleca said:
And did you reboot after?
My first boot take some time but boot, the problem is when I reboot
Click to expand...
Click to collapse
After all was set up and running, I did at least one manual reboot. Everything went normal for me.
Oh.. It's annoying Every time i touch the screen it lights up..
And messages app FC cleared data same
Btw, perfect cm rom!
DaryI said:
Oh.. It's annoying Every time i touch the screen it lights up..
And messages app FC cleared data same
Btw, perfect cm rom!
Click to expand...
Click to collapse
You cand disable the light and problem solved :
message app works well until now. No problem here
Hi, can someone please confirm or put me in the right direction. Thanks in advance.
I'm currently running F4k unofficial cm 12 with F4k pre4 kernel, if I format everything and clean install this ROM will I have to flash a different kernel (if so which one) or will it install its own kernal along with the rom? as I've read that f4k pre4 kernel is not a good combination with this rom as it works in a different way.
Hope this makes sense an someone can enlighten me.
Thanks
Insomniac-Butler said:
Hi, can someone please confirm or put me in the right direction. Thanks in advance.
I'm currently running F4k unofficial cm 12 with F4k pre4 kernel, if I format everything and clean install this ROM will I have to flash a different kernel (if so which one) or will it install its own kernal along with the rom? as I've read that f4k pre4 kernel is not a good combination with this rom as it works in a different way.
Hope this makes sense an someone can enlighten me.
Thanks
Click to expand...
Click to collapse
Flashing this official CM and GApps you will have CM kernel as all. :good:
BLN control says that kernel doesn't support functionality :/
What is the safest way to root my Samsung Galaxy Note 2 ( SPH-L900 ) KOT49H.L900VPUCOH3 running 4.4.2 ?
Any suggestions on the best ROM to use ? The phone is currently 100% stock.
Thanks
mohawk70 said:
What is the safest way to root my Samsung Galaxy Note 2 ( SPH-L900 ) KOT49H.L900VPUCOH3 running 4.4.2 ?
Any suggestions on the best ROM to use ? The phone is currently 100% stock.
Thanks
Click to expand...
Click to collapse
The rooting process is covered at the thread I've linked below.
http://forum.xda-developers.com/note-2-sprint/general/how-to-root-nk2-fix-boot-loop-ne2-to-t3049036
As for which ROM to use... I like to stay stock but with root, no knox and deodexed. If you favor AOSP, there's many to choose from in the development sections.
Thank you ... worked perfectly on OH3 ! Took your suggestion on staying with root/no knock/deodexed. Know of any fix for the extra spaces bug with text suggestion ?
mohawk70 said:
Thank you ... worked perfectly on OH3 ! Took your suggestion on staying with root/no knock/deodexed. Know of any fix for the extra spaces bug with text suggestion ?
Click to expand...
Click to collapse
I've released an update to the keyboard to fix that bug. You can find it at the post below.
http://forum.xda-developers.com/showpost.php?p=63208784&postcount=3
re: keyboard fix
jsnzns said:
The rooting process is covered at the thread I've linked below.
http://forum.xda-developers.com/note-2-sprint/general/how-to-root-nk2-fix-boot-loop-ne2-to-t3049036
As for which ROM to use... I like to stay stock but with root, no knox and deodexed. If you favor AOSP, there's many to choose from in the development sections.
Click to expand...
Click to collapse
Downloaded keyboard fix multiple times from different mirrors. When trying to flash zip from extsd it says invalid signature !
mohawk70 said:
Downloaded keyboard fix multiple times from different mirrors. When trying to flash zip from extsd it says invalid signature !
Click to expand...
Click to collapse
Hmm, that's strange. I just downloaded it and flash it and didn't encounter any errors. You can toggle signature check off in Philz Touch Recovery from the Install Zip menu.
Thanks disabling signature check worked. And a huge thank you for posting a fix for that extremely annoying bug - it works perfectly !
mohawk70 said:
Thanks disabling signature check worked. And a huge thank you for posting a fix for that extremely annoying bug - it works perfectly !
Click to expand...
Click to collapse
I'm happy it worked! No problem.
Rooted? SPH-900
jsnzns said:
I'm happy it worked! No problem.
Click to expand...
Click to collapse
I followed all the instructions from original thread
http://forum.xda-developers.com/note-2-sprint/general/how-to-root-nk2-fix-boot-loop-ne2-to-t3049036
and even updated with success superU to latest, but Super U stopped working.
SoCalBarcaFan said:
I followed all the instructions from original thread
http://forum.xda-developers.com/note-2-sprint/general/how-to-root-nk2-fix-boot-loop-ne2-to-t3049036
and even updated with success superU to latest, but Super U stopped working.
Click to expand...
Click to collapse
Not sure what happened in your case. If you're on OH3 and would like root as well as the ROM being deknoxed and deodexed, feel free to try my mine at the thread below.
http://forum.xda-developers.com/not...m-stock-oh3-rooted-deknoxed-deodexed-t3221123
[ROM] Removed
------------------------------///-------------------------------
Hacker812c
God is alive! I always bless the Lord.
Reserved---
Reserved...
I testing boot and recovery partitions....
Please waiting....
hacker812c said:
Reserved...
I testing boot and recovery partitions....
Please waiting....
Click to expand...
Click to collapse
Keep up man!
God bless
iamjibril said:
Keep up man!
God bless
Click to expand...
Click to collapse
boot and rom is very unstable
not secure
When is the rom going to be uploaded
Why the thread title says it's CM11, but the ROM is Marshmallow?
Theareach said:
Why the thread title says it's CM11, but the ROM is Marshmallow?
Click to expand...
Click to collapse
Thanks for your question
I testing roms 5.1 and 6.0 Port
Roms porting Unstable
I not Uploading for this
hacker812c said:
Thanks for your question
I testing roms 5.1 and 6.0 Port
Roms porting Unstable
I not Uploading for this
Click to expand...
Click to collapse
is there a hope that it might work
i have been waiting for sooooo long
thanks for ur help <3
excellent
waiting for the uploading!!!!!!!!!!!!!!!!!!!
when you upload the Rom?????????????????????
Link for the download?
Can any of us test how the development is doing?
Keep it up
where is the download link???????????????????????????????????
See this post
http://forum.xda-developers.com/galaxy-e-series/general/cm12-1-e7-t3458894
where is the download link??????????????? I love CM ROM and got bored with Touchwiz samsung rom:crying::crying::crying:
Is rom in progress or you are making us fool
thangeram said:
Is rom in progress or you are making us fool
Click to expand...
Click to collapse
yes you said it. Iam also thinking so they are fooling us. Anyhow i realize no one one make the ROM.
Iam skipping from this samsung phones.
Request to All xda users
I already told you they can't make cm rom
So please ignore this types of threads.
Don't follow this because this types of people misusing this important forum. Xda must through
Out this types of threads and threads maker.
Hello, it's 2018 and I got this phone from friend. I wanted to flash newer android and use it for like mails and facebook messages, 'cos of it's keyboard, but as I found out, there aren't nearly any links working, so I'd like to ask if anyone can give here funtioning link to CWM and CM that works together. Thanks
bummp. im also really interested and want to revive my old phone. just need a working version of odin with this phone so i can flash back to stock thxx
Some of my collection
Hope it will help you
https://drive.google.com/drive/folders/1XV-XCndvsCv-iIdKpl55lLFdZll3OsBe?usp=sharing
darkside750 said:
Some of my collection
Hope it will help you
https://drive.google.com/drive/folders/1XV-XCndvsCv-iIdKpl55lLFdZll3OsBe?usp=sharing
Click to expand...
Click to collapse
Just logged on today randomly, yet to test out the tools here but thank you
Hey @darkside750, any chance to have a look at your collection?
steve8x8 said:
Hey @darkside750, any chance to have a look at your collection?
Click to expand...
Click to collapse
Sure
https://drive.google.com/drive/folders/1eboT369T-_LL5L9cBPEIYCsl8hrW359P?usp=sharing (new link)