I rooted my galaxy with no problems using odin i was on LG8 then i used sonic modem flasher (http://forum.xda-developers.com/showthread.php?t=1816530&highlight=sonic) to Upgrade to LI3. All went smooth till i went to about device And my baseband version is: L710VPLI3. And my Build Number is: IMM76D.L710PALG8.... Where did i go wrong?????
htown89 said:
I rooted my galaxy with no problems using odin i was on LG8 then i used sonic modem flasher (http://forum.xda-developers.com/showthread.php?t=1816530&highlight=sonic) to Upgrade to LI3. All went smooth till i went to about device And my baseband version is: L710VPLI3. And my Build Number is: IMM76D.L710PALG8.... Where did i go wrong?????
Click to expand...
Click to collapse
Baseband = modem
Build = Rom
They don't have to match to work together. I'm running an LG8 Rom with the LIF modem. Sometimes you can get better signal strength that way.
The Root said:
Baseband = modem
Build = Rom
They don't have to match to work together. I'm running an LG8 Rom with the LIF modem. Sometimes you can get better signal strength that way.
Click to expand...
Click to collapse
Cool thnx Bro yea i wasnt getting the LI3 OTA update but my wifes got it like a week ago and i didnt have any patience
Okay so the next logical question should then be, how do I know which ones will work together and is there rule of thumb when upgrading? i.e. Rom version should always match the package? (if that makes sense)
ryedunn said:
Okay so the next logical question should then be, how do I know which ones will work together and is there rule of thumb when upgrading? i.e. Rom version should always match the package? (if that makes sense)
Click to expand...
Click to collapse
Here's your answer: http://forum.xda-developers.com/showthread.php?p=32244686
ROM OdexedBlue
Kernel Stock LJ7
Baseband LJ7
DrgnRebrn said:
Here's your answer: http://forum.xda-developers.com/showthread.php?p=32244686
ROM OdexedBlue
Kernel Stock LJ7
Baseband LJ7
Click to expand...
Click to collapse
I clicked the link. Then there was a link in that thread too. So i clicked it. Same thing. So i kept clicking and clicking but it just never ends... I think i have deja, deja, deja, deja, deja vu
lmao.
billard412 said:
I clicked the link. Then there was a link in that thread too. So i clicked it. Same thing. So i kept clicking and clicking but it just never ends... I think i have deja, deja, deja, deja, deja vu
lmao.
Click to expand...
Click to collapse
Yeah the link is back to the original thread
FYI, most folks tend to keep the modem version in sync with the rom version.
Also Fyi, there were binary comparisons done with several of the baseband releases that came with the leaks that proved the only thing that was changed on MOST of them was the version number. No internal code changes were done.
When Samsung sends Sprint a package, it includes the baseband package as well, even if nothing was changed but the version number.
ryedunn said:
Yeah the link is back to the original thread
Click to expand...
Click to collapse
Hmm...
Sent from my SPH-L710 using xda premium
Related
So, I rooted my phone when I got a few weeks ago and didn't note my carriers original baseband version. I am going to flash the stock ROM back on because I wasn't a big fan of the current ROM I have been using. Searching the forums, I see stock ROMS from AT&T (samsung-updates.com) being either I747UCALG1 or I747UCALEM (both being Android 4.0.4). How do I know which one to flash? Does it even really matter so long as I flash one of those versions to the correct SGH-1747 model?
A quick note: The current baseband version being displayed on my phone is I747UCLEM and I can't even find anything out about that specific version.
Edit: Okay so after looking into the issue a bit further, I found that the baseband version just means the AT&T's version of their stock ROM. Anyone care to agree with me on that one so I can go ahead and just flash the most current (I747UCALG1) ROM?
reaganSMASH said:
So, I rooted my phone when I got a few weeks ago and didn't note my carriers original baseband version. I am going to flash the stock ROM back on because I wasn't a big fan of the current ROM I have been using. Searching the forums, I see stock ROMS from AT&T (samsung-updates.com) being either I747UCALG1 or I747UCALEM (both being Android 4.0.4). How do I know which one to flash? Does it even really matter so long as I flash one of those versions to the correct SGH-1747 model?
A quick note: The current baseband version being displayed on my phone is I747UCLEM and I can't even find anything out about that specific version.
Edit: Okay so after looking into the issue a bit further, I found that the baseband version just means the AT&T's version of their stock ROM. Anyone care to agree with me on that one so I can go ahead and just flash the most current (I747UCALG1) ROM?
Click to expand...
Click to collapse
LEM is the firmware that came with the phone...LG1 is the update...you can flash either one.
Sent from my SGH-I747 using xda premium
defnow said:
LEM is the firmware that came with the phone...LG1 is the update...you can flash either one.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Thank you very much for confirming this! Stock LG1 flashed.
And for anyone else who may come across this, Triangle Away is confirmed working with my AT&T SGH-I747.
Looking forward to the rooted version...
Samsung Galaxy SIII Software Update - L710VPLI3
Enhancements/Fixes
- Inclusion of SWYPE keyboard
- Improved LTE connectivity
- SMS Messaging improvements
- EAS sync improvements
Important Notes:
- The new software version is: L710VPL13
- Updates may be released in stages. When checking for the update, you may receive a message
that no update is available, check back later or wait until the update notification is sent to your device.
- Refer to the Samsung Galaxy SIII Software Updates blog for install instructions.
Nice cant wait
dutchman71 said:
Looking forward to the rooted version...
Samsung Galaxy SIII Software Update - L710VPLI3
Enhancements/Fixes
- Inclusion of SWYPE keyboard
- Improved LTE connectivity
- SMS Messaging improvements
- EAS sync improvements
Important Notes:
- The new software version is: L710VPL13
- Updates may be released in stages. When checking for the update, you may receive a message
that no update is available, check back later or wait until the update notification is sent to your device.
- Refer to the Samsung Galaxy SIII Software Updates blog for install instructions.
Click to expand...
Click to collapse
Lol..What does this mean?
mmmajor said:
Lol..What does this mean?
Click to expand...
Click to collapse
What does what mean you quoted the whole damn thing
Sent from my SPH-L710 using xda premium
mmmajor said:
Lol..What does this mean?
Click to expand...
Click to collapse
It means Jelly Bean still isn't ready
iDoc21 said:
It means Jelly Bean still isn't ready
Click to expand...
Click to collapse
Bummer lol
Sent from my Samsung Galaxy S III
shook187 said:
What does what mean you quoted the whole damn thing
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
Well if I quoted the whole damn thing I meant the whole damn thing..but thank you iDoc21
Do I have to unroot to get this update?
Yup just saw this...but I already have Swype installed/no LTE yet so this update doesnt do too much for me.
GIMMIE MY JELLYBEAN!
same here, am rooted with no custom rom just rooted s3
should i unroot, update, and then root again? is there a root update available for this LI3
DroidBabe said:
Do I have to unroot to get this update?
Click to expand...
Click to collapse
PlayYourPosition said:
same here, am rooted with no custom rom just rooted s3
should i unroot, update, and then root again? is there a root update available for this LI3
Click to expand...
Click to collapse
No need to unroot, just wait for the rooted version of the ROM and flash that The rooted version of stock ROM is usually out the same day or a few days after the official realease.
If you update to L710VPLI3 using a rooted ROM do you also need to separately update the radios. Always been a bit confused with radios vs. software ROM. Does enhance LTE (which I use daily) come from software update or radio update.
Android Cowboy said:
If you update to L710VPLI3 using a rooted ROM do you also need to separately update the radios. Always been a bit confused with radios vs. software ROM. Does enhance LTE (which I use daily) come from software update or radio update.
Click to expand...
Click to collapse
You usually have to flash modems (aka radios) separatly, depends on the dev. Well, only saw one dev include it but he created a separate tool to flash modems that is linked below.
Seems that modems were not updated in this release and the LTE optimization is more a software fix. You find the latest modems here and here is the easiest way to flash without Odin.
dragon_rckr said:
You usually have to flash modems (aka radios) separatly, depends on the dev. Well, only saw one dev include it but he created a separate tool to flash modems that is linked below.
Seems that modems were not updated in this release and the LTE optimization is more a software fix. You find the latest modems here and here is the easiest way to flash without Odin.
Click to expand...
Click to collapse
So I gather that if I just flash any ROM that is based on new LI3 then I will have the upgrade enhancement regarding LTE. Great. I hate having to unroot or reflash stock recovery to take OTA. Thanks.
dragon_rckr said:
You usually have to flash modems (aka radios) separatly, depends on the dev. Well, only saw one dev include it but he created a separate tool to flash modems that is linked below.
Seems that modems were not updated in this release and the LTE optimization is more a software fix. You find the latest modems here and here is the easiest way to flash without Odin.
Click to expand...
Click to collapse
I don't see that there's even an update.zip that's been released. I wouldn't jump to conclusions just yet, might still be a modem update.
shook187 said:
What does what mean you quoted the whole damn thing
Sent from my SPH-L710 using xda premium
Click to expand...
Click to collapse
LOL!!!
Sent from my SPH-L710 using xda app-developers app
i havent recieved this yet its an ota update right? if i can get it soon ill pull the rom and upload a rooted version but still not recieved it =(
get ready to have all the bloatware re installed.
my gf has the epic 4g touch. it was stock rooted and the very last update a few days ago re installed all bloatware and went further ahead by disabling the option to disable some of the apps that previously could be uninstalled through application manager. also it took away root so i had to stock re root her phone.
if updates were just performance enhancements i would welcome them but, why do carriers always insist on pushing their crap into our phones??
So this is a update from LG8 or what ever
Sent from my SPH-L710 using xda app-developers app
budde2 said:
So this is a update from LG8 or what ever
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Yes LG8 to LI3 a ics rom not jellybean
I updated the all in one for my galaxy note 2
Stock L900VPAMA7 All-In-One Firmware
the baseband version changed to L900Vpama7 but the android version stayed at 4.1.1 , shouldn't it have changed to ver 4.1.2?
kernel is 3.0.31-265523
build number JR003C.L900VPALJC
Sprint
Thanks ahead of time...
outlawsys said:
I updated the all in one for my galaxy note 2
Stock L900VPAMA7 All-In-One Firmware
the baseband version changed to L900Vpama7 but the android version stayed at 4.1.1 , shouldn't it have changed to ver 4.1.2?
kernel is 3.0.31-265523
build number JR003C.L900VPALJC
Sprint
Thanks ahead of time...
Click to expand...
Click to collapse
no. the all in one is firmware only. to flash the software for ma7 you will need to flash one of the ma7 roms
reply
t3project said:
no. the all in one is firmware only. to flash the software for ma7 you will need to flash one of the ma7 roms
Click to expand...
Click to collapse
so I'll need to flash this Stock_SPH-L900VPAMA7_Odex.zip. ?
I see a kernel download but I believe its included in the file above.
success!
outlawsys said:
so I'll need to flash this Stock_SPH-L900VPAMA7_Odex.zip. ?
I see a kernel download but I believe its included in the file above.
Click to expand...
Click to collapse
Sweet all went well.
thanks XDA
lost ability to voice dial thru car stereo
outlawsys said:
Sweet all went well.
thanks XDA[/QUOTE
Anyone know why I have lost the ability to voice dial on my car stereo using bluetooth, it was working fine before I applied this.
Click to expand...
Click to collapse
Hello guys, sorry if this is a noob question for you Sammy guys (I'm more used to Nexus devices), but I was wondering if it is possible to update the baseband version on this device? More specifically, I was wondering if I could update to an international radio/modem? If not, does anyone know where to find the latest radios for each device. I tried searching but only could come up with an older thread for the version I already have (MDL). On my Nexus One and HTC One S we could flash any baseband we wanted, international or carrier release. Thanks!
Closed Source Project said:
Hello guys, sorry if this is a noob question for you Sammy guys (I'm more used to Nexus devices), but I was wondering if it is possible to update the baseband version on this device? More specifically, I was wondering if I could update to an international radio/modem? If not, does anyone know where to find the latest radios for each device. I tried searching but only could come up with an older thread for the version I already have (MDL). On my Nexus One and HTC One S we could flash any baseband we wanted, international or carrier release. Thanks!
Click to expand...
Click to collapse
No.
Do not flash any radio other than the ones made for your device. At best it won't boot. At worst it won't let you Odin back to the correct radio and it will never boot.
Skipjacks said:
No.
Do not flash any radio other than the ones made for your device. At best it won't boot. At worst it won't let you Odin back to the correct radio and it will never boot.
Click to expand...
Click to collapse
Sucks we have to wait for T-Mobile to finally release an update. I knew I should have just went for the i9505 international variant lol. Never again buy from a carrier! Thanks tho, saved me some fun time tooling around in Odin and losing my files.
Closed Source Project said:
Sucks we have to wait for T-Mobile to finally release an update. I knew I should have just went for the i9505 international variant lol. Never again buy from a carrier! Thanks tho, saved me some fun time tooling around in Odin and losing my files.
Click to expand...
Click to collapse
Yeah but a new modem update by itself will probably never be a super improvement. So you probably aren't missing out on much.
Its not like an updated modem will let you talk to the Moon or something.
Sent from your phone. You should be more careful where you leave that thing.
Skipjacks said:
Yeah but a new modem update by itself will probably never be a super improvement. So you probably aren't missing out on much.
Its not like an updated modem will let you talk to the Moon or something.
Sent from your phone. You should be more careful where you leave that thing.
Click to expand...
Click to collapse
Lol.
Sent from my SGH-M919 using xda app-developers app
Skipjacks said:
Yeah but a new modem update by itself will probably never be a super improvement. So you probably aren't missing out on much.
Its not like an updated modem will let you talk to the Moon or something.
Sent from your phone. You should be more careful where you leave that thing.
Click to expand...
Click to collapse
LOL. what he's trying to do (my guess) is to use the i9505 4.3 roms. Unfortunately you will LOSE data connection (with the screen off) without the newer radios.
No option unfortunately but wait.
dannyben said:
LOL. what he's trying to do (my guess) is to use the i9505 4.3 roms. Unfortunately you will LOSE data connection (with the screen off) without the newer radios.
No option unfortunately but wait.
Click to expand...
Click to collapse
yeap that is what we are all waiting for to be able to use touchwiz 4.3
dannyben said:
LOL. what he's trying to do (my guess) is to use the i9505 4.3 roms. Unfortunately you will LOSE data connection (with the screen off) without the newer radios.
No option unfortunately but wait.
Click to expand...
Click to collapse
Spot on. Apparently, T-Mo is supposed to release their 4.3 update early to mid November (consult General Section for source). Then and only then would we be able to use a 4.3 TW ROM without cell network wonking out like a drunk. Hopefully T-Mobile could be at least 1/3rd useful this time and actually push out an update for once.. (you can feel my hatred towards carriers...... =.=).
EDIT: SOURCE THREAD, towards the last few pages starts the talk of the rumored T-Mo Nov. release.
Closed Source Project said:
Spot on. Apparently, T-Mo is supposed to release their 4.3 update early to mid November (consult General Section for source). Then and only then would we be able to use a 4.3 TW ROM without cell network wonking out like a drunk. Hopefully T-Mobile could be at least 1/3rd useful this time and actually push out an update for once.. (you can feel my hatred towards carriers...... =.=).
EDIT: SOURCE THREAD, towards the last few pages starts the talk of the rumored T-Mo Nov. release.
Click to expand...
Click to collapse
Yes... Scheduled for 11/18. And it wouldn't be coming either if they weren't forced to by Samsung. They've got lots of watches to sell!!!
Sent from my SGH-M919 using Tapatalk
So OMG. ..no one can extract the modem on the tmobile dump?
Sent from my GT-I9505 using Tapatalk 2
re: 4.3 dump
epsix said:
So OMG. ..no one can extract the modem on the tmobile dump?
Sent from my GT-I9505 using Tapatalk 2
Click to expand...
Click to collapse
There is no M919 Tmobile 4.3 dump.
That's the problem, the only dump and the flashable zipfile rom
available as of yet is for the international versions of the S4's.
Flashing an international version of the 4.3 rom into our M919
phones even if it worked properly we would be losing wifi calling
and most like the LTE feature plus who knows what else.
You are wrong there is a t mobile4.3 dump for very long posted in general section : http://forum.xda-developers.com/showthread.php?t=2478553
Sent from my SGH-M919V using Tapatalk 4
We CAN run the TW 4.3 ROMs and have full LTE as normal (except for Wi-Fi calling b/c that's a T-Mo specific feature), the only issue is that data randomly cuts in and out. I don't understand how I could run AOSP 4.3 with no issues but 4.3 TW gives problems...
The thing is, only us T-Mo users have data issues, not the international or any other carrier. So it MUST be the radio version that is the cause of the problems, which is why we must wait for T-Mo to finally release an update...
Has anyone dare to flash international MJ5, JM6 modem? I mean our bootloader is unlock right? If it don't work can we just flash back our old modem? Just a thought.
Sent from my GT-I9505 using Tapatalk 2
Netuser said:
You are wrong there is a t mobile4.3 dump for very long posted in general section : http://forum.xda-developers.com/showthread.php?t=2478553
Sent from my SGH-M919V using Tapatalk 4
Click to expand...
Click to collapse
Not a full dump. Only partial dump as the OP of that thread didn't want to root for fear of triggering Knox, and he had to return the device to tmobile.
☞ Sent from here☜???
I am looking to downgrade from 4.4.2 to 4.1.1 and I am having trouble finding any links that are not broken for JB LJ7 4.1.1 Stock Rom. I have Sprint Galaxy S 3.
Thanks, Mystical Turkey.
MysticalTurkey said:
I am looking to downgrade from 4.4.2 to 4.1.1 and I am having trouble finding any links that are not broken for JB LJ7 4.1.1 Stock Rom. I have Sprint Galaxy S 3.
Thanks, Mystical Turkey.
Click to expand...
Click to collapse
An actual downgrade will brick your device with no known fix....if you can find a custom ROM based on 4.1.2 then go for it...but pure stock is a no no
REV3NT3CH said:
An actual downgrade will brick your device with no known fix....if you can find a custom ROM based on 4.1.2 then go for it...but pure stock is a no no
Click to expand...
Click to collapse
Well, my reasoning behind the 4.1.1 is that I am wanting to change my MSL and tutorials state that LJ7 is needed with LG2 Radio as well. Do you know how to change MSL to 00000 from current?
MysticalTurkey said:
Well, my reasoning behind the 4.1.1 is that I am wanting to change my MSL and tutorials state that LJ7 is needed with LG2 Radio as well. Do you know how to change MSL to 00000 from current?
Click to expand...
Click to collapse
As far as I've heard, people have said that the procedure to do that still works on 4.4
CNexus said:
As far as I've heard, people have said that the procedure to do that still works on 4.4
Click to expand...
Click to collapse
Link to procedure or tutorial for 4.4.2?