Develop Bugs

Baseband and Build Number not the same?

I rooted my galaxy with no problems using odin i was on LG8 then i used sonic modem flasher (http://forum.xda-developers.com/showthread.php?t=1816530&highlight=sonic) to Upgrade to LI3. All went smooth till i went to about device And my baseband version is: L710VPLI3. And my Build Number is: IMM76D.L710PALG8.... Where did i go wrong?????

htown89 said:
I rooted my galaxy with no problems using odin i was on LG8 then i used sonic modem flasher (http://forum.xda-developers.com/showthread.php?t=1816530&highlight=sonic) to Upgrade to LI3. All went smooth till i went to about device And my baseband version is: L710VPLI3. And my Build Number is: IMM76D.L710PALG8.... Where did i go wrong?????
Click to expand...
Click to collapse
Baseband = modem
Build = Rom
They don't have to match to work together. I'm running an LG8 Rom with the LIF modem. Sometimes you can get better signal strength that way.

The Root said:
Baseband = modem
Build = Rom
They don't have to match to work together. I'm running an LG8 Rom with the LIF modem. Sometimes you can get better signal strength that way.
Click to expand...
Click to collapse
Cool thnx Bro yea i wasnt getting the LI3 OTA update but my wifes got it like a week ago and i didnt have any patience

Okay so the next logical question should then be, how do I know which ones will work together and is there rule of thumb when upgrading? i.e. Rom version should always match the package? (if that makes sense)

ryedunn said:
Okay so the next logical question should then be, how do I know which ones will work together and is there rule of thumb when upgrading? i.e. Rom version should always match the package? (if that makes sense)
Click to expand...
Click to collapse
Here's your answer: http://forum.xda-developers.com/showthread.php?p=32244686
ROM OdexedBlue
Kernel Stock LJ7
Baseband LJ7

DrgnRebrn said:
Here's your answer: http://forum.xda-developers.com/showthread.php?p=32244686
ROM OdexedBlue
Kernel Stock LJ7
Baseband LJ7
Click to expand...
Click to collapse
I clicked the link. Then there was a link in that thread too. So i clicked it. Same thing. So i kept clicking and clicking but it just never ends... I think i have deja, deja, deja, deja, deja vu
lmao.

billard412 said:
I clicked the link. Then there was a link in that thread too. So i clicked it. Same thing. So i kept clicking and clicking but it just never ends... I think i have deja, deja, deja, deja, deja vu
lmao.
Click to expand...
Click to collapse
Yeah the link is back to the original thread

FYI, most folks tend to keep the modem version in sync with the rom version.
Also Fyi, there were binary comparisons done with several of the baseband releases that came with the leaks that proved the only thing that was changed on MOST of them was the version number. No internal code changes were done.
When Samsung sends Sprint a package, it includes the baseband package as well, even if nothing was changed but the version number.

ryedunn said:
Yeah the link is back to the original thread
Click to expand...
Click to collapse
Hmm...
Sent from my SPH-L710 using xda premium

[Q] Q: OTA for 4.2 fails on my Galaxy Nexus during installation why?

Hello,
I received 4.2 OTA update to upgrade my Galaxy Nexus from 4.1.2....update downloaded fine...and then performed a reboot of the device to install...during installation, it failed...received the sleeping android with the "Big Red ! triangle'. The phone restarted and the version running was still 4.1.2 ... this has happened 3 times already.
Any idea on why this happens ...and how to get it updated to 4.2 correctly??

premal_f1 said:
Hello,
I received 4.2 OTA update to upgrade my Galaxy Nexus from 4.1.2....update downloaded fine...and then performed a reboot of the device to install...during installation, it failed...received the sleeping android with the "Big Red ! triangle'. The phone restarted and the version running was still 4.1.2 ... this has happened 3 times already.
Any idea on why this happens ...and how to get it updated to 4.2 correctly??
Click to expand...
Click to collapse
is your Gnex Rooted? Deodexed? Custom Recovery? more details about your phone...

chuckbartowski said:
is your Gnex Rooted? Deodexed? Custom Recovery? more details about your phone...
Click to expand...
Click to collapse
unlocked bootloader but not rooted...do not have any Custom ROMs. Stock Android version 4.1.2
Version: Yakju

premal_f1 said:
unlocked bootloader but not rooted...do not have any Custom ROMs. Stock Android version 4.1.2
Version: Yakju
Click to expand...
Click to collapse
You dont have a custom recovery installed as well, then?
How did you unlock the bootloader? (May seem like a pointless question, depending on the op's answer.)
What radio/baseband version do you have installed?
Sent from my i9250

bk201doesntexist said:
You dont have a custom recovery installed as well, then?
How did you unlock the bootloader? (May seem like a pointless question, depending on the op's answer.)
What radio/baseband version do you have installed?
Sent from my i9250
Click to expand...
Click to collapse
RadioBaseband version: i9250XXLA2
Build: JZO54K
I had unlocked the bootloader via the instructions on the following link - http://forum.xda-developers.com/showthread.php?t=1626895
and did a return to stock for 4.1 Jelly Bean installation. I did receive the OTA for 4.1.2 and it installed fine without any issues.

premal_f1 said:
RadioBaseband version: i9250XXLA2
Build: JZO54K
I had unlocked the bootloader via the instructions on the following link - http://forum.xda-developers.com/showthread.php?t=1626895
and did a return to stock for 4.1 Jelly Bean installation. I did receive the OTA for 4.1.2 and it installed fine without any issues.
Click to expand...
Click to collapse
JZO54K radio is XXLF1. JRO03C was XXLA2, if i recall it correctly. Explains why no issues were found when upgrading to JRO03C.
JOP40C radio is XXLH1.
Sent from my i9250

premal_f1 said:
RadioBaseband version: i9250XXLA2
Build: JZO54K
I had unlocked the bootloader via the instructions on the following link - http://forum.xda-developers.com/showthread.php?t=1626895
and did a return to stock for 4.1 Jelly Bean installation. I did receive the OTA for 4.1.2 and it installed fine without any issues.
Click to expand...
Click to collapse
I think your baseband should be XXLF1. XXLA2 was an ICS baseband.
XXLA2:
- Standard European baseband
- Originally from the yakju ICL53F factory image and the OTA update (to 4.0.4 / IMM76D from ICL53F)
Click to expand...
Click to collapse

3rdstring said:
I think your baseband should be XXLF1. XXLA2 was an ICS baseband.
Click to expand...
Click to collapse
how do I update the baseband?? please help.
What instructions do i need to follow up the update the OS manually to 4.2??

3rdstring said:
I think your baseband should be XXLF1. XXLA2 was an ICS baseband.
Click to expand...
Click to collapse
i stand corrected - from IMM76D, more precisely. (thanks )
premal_f1 said:
how do I update the baseband?? please help.
What instructions do i need to follow up the update the OS manually to 4.2??
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1626895

bk201doesntexist said:
i stand corrected - from IMM76D, more precisely. (thanks )
http://forum.xda-developers.com/showthread.php?t=1626895
Click to expand...
Click to collapse
Sorry...but I still don't understand why i would need to do the manual "return to stock" again...
since my baseband is XXLA2...does that mean OTA 4.2 installtion will never work...till the baseband is updated? If i do follow the steps for return to stock manual update again (which to me is very painful since i m a n00b) ...will the baseband be updated again...?? what happens when 4.2.1 has to be upgraded...followed next yr by 4.3 or 5 (key lime pie)?
are there easy steps to just update the base band??
(pardon my questions...i m learning the hard way not to buy google devices from eBay)

premal_f1 said:
Sorry...but I still don't understand why i would need to do the manual "return to stock" again...
since my baseband is XXLA2...does that mean OTA 4.2 installtion will never work...till the baseband is updated? If i do follow the steps for return to stock manual update again (which to me is very painful since i m a n00b) ...will the baseband be updated again...?? what happens when 4.2.1 has to be upgraded...followed next yr by 4.3 or 5 (key lime pie)?
are there easy steps to just update the base band??
(pardon my questions...i m learning the hard way not to buy google devices from eBay)
Click to expand...
Click to collapse
IF the radio is the only issue you can fastboot flash the xxlf1 radio. You will need to follow the first few steps in bk201doesntexist's link to set up the fastboot drivers & DL the platform-tools necessary to flash your device. That post will also serve as agood example of how the fastboot utility works.
[REF] efrant's "Android for Galaxy Nexus" 101 & FAQs <<< Additional Infos

3rdstring said:
IF the radio is the only issue you can fastboot flash the xxlf1 radio. You will need to follow the first few steps in bk201doesntexist's link to set up the fastboot drivers & DL the platform-tools necessary to flash your device. That post will also serve as agood example of how the fastboot utility works.
[REF] efrant's "Android for Galaxy Nexus" 101 & FAQs <<< Additional Infos
Click to expand...
Click to collapse
Thank you all...updating the radio worked. YOU ARE THE BEST!!

[Q] Note 2 build number

Using note 2 toolkit to do a backup
i know mine is a N7100, but the build number part is confusing, on my phone in the about section it says that its JZO54K.N7100XXDMC3, but on the proGram, the only two 7100 builds which are 4.1.2 are both DLK7-DLL7 or DMA3-DMC1
heeellpppp!!!
Chaza218

chaza218 said:
Using note 2 toolkit to do a backup
i know mine is a N7100, but the build number part is confusing, on my phone in the about section it says that its JZO54K.N7100XXDMC3, but on the proGram, the only two 7100 builds which are 4.1.2 are both DLK7-DLL7 or DMA3-DMC1
heeellpppp!!!
Chaza218
Click to expand...
Click to collapse
Probably wasn't updated after the new firmware came out. The latest firmware is indeed MC3

xcly said:
Probably wasn't updated after the new firmware came out. The latest firmware is indeed MC3
Click to expand...
Click to collapse
chaza218 was right. I have this issue too....

[Q] Looking for Rom.

I am looking to downgrade from 4.4.2 to 4.1.1 and I am having trouble finding any links that are not broken for JB LJ7 4.1.1 Stock Rom. I have Sprint Galaxy S 3.
Thanks, Mystical Turkey.

MysticalTurkey said:
I am looking to downgrade from 4.4.2 to 4.1.1 and I am having trouble finding any links that are not broken for JB LJ7 4.1.1 Stock Rom. I have Sprint Galaxy S 3.
Thanks, Mystical Turkey.
Click to expand...
Click to collapse
An actual downgrade will brick your device with no known fix....if you can find a custom ROM based on 4.1.2 then go for it...but pure stock is a no no

REV3NT3CH said:
An actual downgrade will brick your device with no known fix....if you can find a custom ROM based on 4.1.2 then go for it...but pure stock is a no no
Click to expand...
Click to collapse
Well, my reasoning behind the 4.1.1 is that I am wanting to change my MSL and tutorials state that LJ7 is needed with LG2 Radio as well. Do you know how to change MSL to 00000 from current?

MysticalTurkey said:
Well, my reasoning behind the 4.1.1 is that I am wanting to change my MSL and tutorials state that LJ7 is needed with LG2 Radio as well. Do you know how to change MSL to 00000 from current?
Click to expand...
Click to collapse
As far as I've heard, people have said that the procedure to do that still works on 4.4

CNexus said:
As far as I've heard, people have said that the procedure to do that still works on 4.4
Click to expand...
Click to collapse
Link to procedure or tutorial for 4.4.2?

unlocked by Tmobile

i have the t mobile SGH-T889 which has been unlocked by tmobile.
im now running the AT&T sim card......
is there anyway for me to install the
AT&T SGH-I317 firmware on the tmobile SGH-T889 ?
it already has the 4.3 firmware...

SaTxCowboy said:
i have the t mobile SGH-T889 which has been unlocked by tmobile.
im now running the AT&T sim card......
is there anyway for me to install the
AT&T SGH-I317 firmware on the tmobile SGH-T889 ?
it already has the 4.3 firmware...
Click to expand...
Click to collapse
Just make certain you don't flash the AT&T modem. There are AT&T roms available on their subforum.
You should be fine.

ATT
Coug76 said:
Just make certain you don't flash the AT&T modem. There are AT&T roms available on their subforum.
You should be fine.
Click to expand...
Click to collapse
so i jes download the AT&T rom then install ?
im now running the liquid smooth 4.4.4
but it shows my phone as a GT-N7105 ?
everything works great so far !

SaTxCowboy said:
so i jes download the AT&T rom then install ?
im now running the liquid smooth 4.4.4
but it shows my phone as a GT-N7105 ?
everything works great so far !
Click to expand...
Click to collapse
You can always edit your build prop to show different carrier, device, etc..

SaTxCowboy said:
so i jes download the AT&T rom then install ?
im now running the liquid smooth 4.4.4
but it shows my phone as a GT-N7105 ?
everything works great so far !
Click to expand...
Click to collapse
Yup. That is a build.prop edit to change the N7105. There is a T889 and a I317 LS.

DS-NE5v1 rom
ok. im now running the DS-NE5v1 rom...
its a very good rom....but is there away i can change the AT&T boot screen ?
its jes a white back ground wif tha AT&T logo on the center ?
i would like to have AT&T animated one from firmware 4.1.2.......its animated.....
what do i do now ?
or jes leave it b !!!

AT&T
i would like to have this on my SGH-T889.unlocked and rooted...
what do i have to do ?
Android version: 4.4.2
Baseband version: T889UVUCMK7
Kernel version: 3.0.31-1728680 [email protected] #1 Fri May 23 19:15:41 KST 2014
is it possible ?
tmobile said the 4.3 is the final for the SGH-T889 !!!!

what program
Coug76 said:
Yup. That is a build.prop edit to change the N7105. There is a T889 and a I317 LS.
Click to expand...
Click to collapse
what program do i use to change it..build.prop ?

SaTxCowboy said:
what program do i use to change it..build.prop ?
Click to expand...
Click to collapse
Buildprop editor from play store

wifi calling
mexigga said:
Buildprop editor from play store[/QUOT
how do i enable wifi calling ?
on a SGH-T889 rooted & flashed to SGH-I317 ?
Click to expand...
Click to collapse

wifi calling only works on t-mobile touch wiz roms. ie jedi x 2. any aosp roms such as cm11, jedi open source(built off cm11), carbon, aokp won't have wifi calling

changed kernel
i have no idea what happend with the Kernel version: 3.0.31-1728680 [email protected] #1 Fri May 23 19:15:41 KST 2014.....
i redid my cell 2 get more space after awhile......
but when i put the same ROM (i think) the i317-cwm-ucucne5-rooted-deodex.
but when i installed it.....my modem was already working, but my camera dont work...
it says camera failed....
i checked the kernel and it has india in it ?
i even tried the cwm-i317-ucucne5-kernel.
which got stuck at the att boot screen for over 15 minutes ?

HELP !!!
SaTxCowboy said:
i would like to have this on my SGH-T889.unlocked and rooted...
what do i have to do ?
Android version: 4.4.2
Baseband version: T889UVUCMK7
Kernel version: 3.0.31-1728680 [email protected] #1 Fri May 23 19:15:41 KST 2014
is it possible ?
tmobile said the 4.3 is the final for the SGH-T889 !!!!
Click to expand...
Click to collapse
after days of searching......
i cant seem 2 find the Kernel version: 3.0.31-1728680 [email protected] #1 Fri May 23 19:15:41 KST 2014 ???
any help will b grateful....
thx

SaTxCowboy said:
mexigga said:
Buildprop editor from play store[/QUOT
how do i enable wifi calling ?
on a SGH-T889 rooted & flashed to SGH-I317 ?
Click to expand...
Click to collapse
These rom questions are great questions but they belong in the forum for the ROM you are running. However, you CANNOT get wifi calling from the AT&T Rom. It will only work on the T-Mobile stock ROM or developer ROMS that have used the T-Mo stock Rom Base. Jedi Master X2 comes to mind.
Please post any other of your questions for the rom you are running in its appropriate forum. I believe you will have better luck. Below is the link to the Ditto Note 3 forum. Good Luck!
http://forum.xda-developers.com/showthread.php?t=2541860
Click to expand...
Click to collapse