My Pda 2k device i tryed to upgrade it from 2003 SE to 2k5 after pressing update the device restarted gived me a gray screen and typed on it seril and at the buttom v2.02 now i cant open the device each time i reset or heard rest this is the only screen appears to me i cant even connect to activsync please i need your help what to do to get my device back, this error message i recived (usb device not recognized aslo active sync didnt recognize it)
i need to add a point the device is not working on the USP connection as it have a problem only serial port to connect with the pc
i'm so new here please help me
not to worry.. you can perform a hard reset of your 2k3 version "power+reset" to get you back to at least a working device.. I have been through this and have had this happen to me as well.. try entering bootloader again "power+record+reset" and dock it fairly quickly and it should change to USB on the screen and PC recognize it... also for anyone reading this.. I would highly recommend plugging your cradle into a 5v power supply as I can only imagine most of the bricked BAs are probably due to a computer freezing and/or the PC shutting down power to the USB port only for a fraction of a second and hosing the flash up.
THx Man i will try i hop this will work :lol:
I have a problem. My Exec is stuck on the bootloader screen. All I see is Serial at the top, and v1.00 at the bottom.
When I connect my exec via USB, the screen continues to say Serial (rather than switching to USB) and the PC I connect to 'installs' the device as 'unknown device' in device manager.
I've seen mention of the problem elsewhere on the site, but the only solution I can find seems to be to keep trying, and eventually it's recognised. So far, after three days of trying, it has not been recognised.
I am aware of Buzz tool to get the device out of bootloader mode, but that required a connection to be established, which at the moment, I can't do.
Has anyone got any experience of this, or any ideas as to what's causing this, or how this can be fixed? I have tried uninstalling the 'unknown device' from device manger, restarting the PC (and hard reset of the Exec) then reconnecting, but the same thing happens every time.
Any ideas would be appreciated, as I'm currently staring at a rather expensive paper weight.
Try this it shld work
hdubli said:
This is based on my experience with two UNis..one Exec and other JASJAR..both had same problem...this is how I solved :
-Put yr device in bootloader Mode
-Disable USB in Active Sync
-Now connect woth USB cable and open mtty utility
-Select the "WESUSB... " port
-You shall see a blank white screen..press Enter to get "USB>"
-Then type ( as BUzz has informed) set 14 0
(here I wud like to inform that after doing the above I did not get success so I typed set 14 10,then set 14 9 for two three times)
-Then I ran the ROM Upgrade directly(After enbabling the USB)
-I then followed the procedure as informed on the COngratulations Screen that is hold the two "-" buttons and soft reset and then pressed 0
-I got them back to normal..
I hope this helps to all my friends...Pls feel free..pls do not trouble our Buzz..he might be busy in inventing something more to our devices
Click to expand...
Click to collapse
Guru Meditation said:
I have a problem. My Exec is stuck on the bootloader screen. All I see is Serial at the top, and v1.00 at the bottom.
When I connect my exec via USB, the screen continues to say Serial (rather than switching to USB) and the PC I connect to 'installs' the device as 'unknown device' in device manager.
I've seen mention of the problem elsewhere on the site, but the only solution I can find seems to be to keep trying, and eventually it's recognised. So far, after three days of trying, it has not been recognised.
I am aware of Buzz tool to get the device out of bootloader mode, but that required a connection to be established, which at the moment, I can't do.
Has anyone got any experience of this, or any ideas as to what's causing this, or how this can be fixed? I have tried uninstalling the 'unknown device' from device manger, restarting the PC (and hard reset of the Exec) then reconnecting, but the same thing happens every time.
Just noticed your user name, I was a big Amiga fan a few years back, still fire up Amiga forever occasionally on my PC when I feel the need.
Any ideas would be appreciated, as I'm currently staring at a rather expensive paper weight.
Click to expand...
Click to collapse
Try it with a different USB cable or in a different USB port (don't go through a hub and if you've been using a laptop then try it on a desktop PC since some laptops have hubs built into them). If that doesn't work then you're out of luck as your Universal isn't detecting that you've connected to your PC and its time to send it in for repair.
Thanks Niketkumar - unfortunately it's the step before your suggestion kicks in thats the problem - the device won't connect to the PC, so when using mtty WESUSB..... isn't an option, only COM1 and COM2.
Shuflie, I've tried with three separate USB cables on a laptop and desktop (neither through a hub, and the same device has worked fine on both laptop and desktop before).
I fear a trip to the doctors is in order ...
Very frustrating because the PC sees a device, but installs it as unknown device. Anyone know if theres a Windows CE device driver that I could try and install as an overide (i.e. in device manager on the PC go to update driver and browse to a WinCE.inf or equivalent?)
Failing this, has anyone got any clue what needs to be fixed? Or how much it might cost?
i am stuck on the same problem and wondering the forum for almost 3 days now with no luck.... please help my device is in boot loader mood but not turning the serial to USB ......... please HELP.......
solution
Guru Meditation said:
Thanks Niketkumar - unfortunately it's the step before your suggestion kicks in thats the problem - the device won't connect to the PC, so when using mtty WESUSB..... isn't an option, only COM1 and COM2.
Shuflie, I've tried with three separate USB cables on a laptop and desktop (neither through a hub, and the same device has worked fine on both laptop and desktop before).
I fear a trip to the doctors is in order ...
Very frustrating because the PC sees a device, but installs it as unknown device. Anyone know if theres a Windows CE device driver that I could try and install as an overide (i.e. in device manager on the PC go to update driver and browse to a WinCE.inf or equivalent?)
Failing this, has anyone got any clue what needs to be fixed? Or how much it might cost?
Click to expand...
Click to collapse
Please follow the steps:
1. Plug in ur usb cable in bootloader mode while it is showing 'serial' and version 'x.xx'.
2. Soft reset by pressing Backlight+power+reset pin WHILE KEEPING THE USB CABLE CONNECTED
3. your phone will now reboot into 'usb' mode. Don't remove the usb cable yet.
4. Remove the Memory card while keeping the usb cable still connected and VOILA,your pc starts recognising your phone as Microsoft usb sync.
5. Do whatever you want to do now (upgrade)
Hope it solves the problem now.
Press thanks if it does.
Something else to try
Having had a few issues with my G3 Uni, I've been through my fare share of Uni bootloader issues. When I find that I can't get the 'serial' to go to 'USB', I normally find it's because I haven't taken the memory card or the SIM card out (usually the memory card).
Make sure your memory card is out, then try to enter the bootloader and see if this cures it. If it does, then use mtty and the command 'set 14 0'
This tells it to reboot on reset. if you were to use 'set 14 1' it would go back to the bootloader on reset.
my Htc hd2 t-mobile won't recognize usb on boot-loader mode
hey guys i have a big problem!!!! my Htc hd2 t-mobile won't recognize usb on boot-loader mode. Here is the story my phone was running android 2.3.7 cyanogen 7 but i wanted to update it to ics android 4.0.4, So to do that i restarted my phone while holding down the down volume button and the boot-loader with the three colors came-on saying serial but when i connect my usb cable it won't show usb. even when i tried to run the dft.exe it shows an error saying usb connection failed. BY the way it lets me access the sd card using the usb cable on my pc, so i don't know what the problem is. PLEAS HEALP i am begging u guys pleas!!!!!!!!!!!!!!
kaleb2954 said:
hey guys i have a big problem!!!! my Htc hd2 t-mobile won't recognize usb on boot-loader mode. Here is the story my phone was running android 2.3.7 cyanogen 7 but i wanted to update it to ics android 4.0.4, So to do that i restarted my phone while holding down the down volume button and the boot-loader with the three colors came-on saying serial but when i connect my usb cable it won't show usb. even when i tried to run the dft.exe it shows an error saying usb connection failed. BY the way it lets me access the sd card using the usb cable on my pc, so i don't know what the problem is. PLEAS HEALP i am begging u guys pleas!!!!!!!!!!!!!!
Click to expand...
Click to collapse
you have the wrong forum friends! This Htc Universal section
to update Android on HTC HD2, you can use the Clock Work Mod Recovery !! for more details should refer to this thread http://forum.xda-developers.com/showthread.php?t=1021837
I-MATE JASJAR hung
Guru Meditation said:
Thanks Niketkumar - unfortunately it's the step before your suggestion kicks in thats the problem - the device won't connect to the PC, so when using mtty WESUSB..... isn't an option, only COM1 and COM2.
Shuflie, I've tried with three separate USB cables on a laptop and desktop (neither through a hub, and the same device has worked fine on both laptop and desktop before).
I fear a trip to the doctors is in order ...
Very frustrating because the PC sees a device, but installs it as unknown device. Anyone know if theres a Windows CE device driver that I could try and install as an overide (i.e. in device manager on the PC go to update driver and browse to a WinCE.inf or equivalent?)
Failing this, has anyone got any clue what needs to be fixed? Or how much it might cost?
Click to expand...
Click to collapse
Hi every one,
i have a serious problem with my HTC I-MATE JASJAR what's blocked in white screen (Serial / USB) and i cannot do anything on it, no boot, no reset soft, no reset Hard, no upgrade.
The issue is related to:
I tried to upgrade Radio ROM from 1.09.00 to 1.12 and i'm using Windows 7 Pro and when starting Flash, my PC shutdown because an electrical issue and since that, i cannot boot my device, i cannot flash or reset, my device is hung on white screen with Serial when no USB cable bluged in the PC and USB when Cable is pluged.
I Tried many times to boot it but no response, it's still hung and nothing can move on it.
I Just have one detail: when i plug the USB cable in my PC, the device is reconised but when starting upgrade or flash, i have error 101, no connexion.
Plz someone help me
bechir2013 said:
Hi every one,
i have a serious problem with my HTC I-MATE JASJAR what's blocked in white screen (Serial / USB) and i cannot do anything on it, no boot, no reset soft, no reset Hard, no upgrade.
The issue is related to:
I tried to upgrade Radio ROM from 1.09.00 to 1.12 and i'm using Windows 7 Pro and when starting Flash, my PC shutdown because an electrical issue and since that, i cannot boot my device, i cannot flash or reset, my device is hung on white screen with Serial when no USB cable bluged in the PC and USB when Cable is pluged.
I Tried many times to boot it but no response, it's still hung and nothing can move on it.
I Just have one detail: when i plug the USB cable in my PC, the device is reconised but when starting upgrade or flash, i have error 101, no connexion.
Plz someone help me
Click to expand...
Click to collapse
look here
http://forum.xda-developers.com/showpost.php?p=5456317&postcount=6
the first point...
A lot easier than to root this device
Hello all,
I kindly request some help regarding the following issue :
I have a rooted Galaxy Wonder GT-I8150, following the instructions on this site.
Firmware I8150XXLB4_I8150OJVLB1_I8150XXLB4
I used the phone normally for a long time. But when I woke up this morning, it was off and won't turn on no matter what method I tried.
No outside damages, no intervention, no newly installed software.
3-button-combo doesn't work. I cant put the phone into the recovery mode.
Odin doesn't recognize the phone.
Even when I connect the phone to the charger, nothing happens. The screen is black all the time.
When I connect to the computer with the usb cable, I get "device driver software was not successfully installed" qhsusb_dload
The problem is that I have important company documents stored on the phones memory, which unfortunately eliminates my
option of taking it to a Samsung Service point.
So, if I could please get any help to get the device working again, (or at least delete the company files on the phone) I would be really grateful.
So, friends, allow me to remind you NOT to put any confidential documents onto your phones' memory so that you won't have the troubles
I am experiencing now.
Looking forward to any suggestions you may have.
Regards.
have you tried installing SAMSUNG Kies on you PC? then uninstall it but do not uninstall the driver.. it may works
Ivan, I just tried your method, but sadly, the problem still persists. Thanks.
oh ok.. if like that you need a lot of experiment.. try in another computer.. Windows 7 or Vista recommended.. better don't use XP.. try changing USB port too.. move USB port to another that attached to the motherboard PC.. then if all doesn't works, pay for SAMSUNG service centre and they will fix it hehehe
Hi all, I have in my possession a Sony Xperia Z5 Premium (E6853) International version, recently trip and put it in a somewhat old PC running Windows XP, the phone was working perfectly until now, after having logged started to give problems , I explain in great detail:
When i connecting for the first time, the phone was powered off and would not turn on, then when connected to the PC, lit perfectly, but to my surprise, when connected to other computers, just start to charge, the phone did not recognize computers, i change the cable, nothing, restarting the phone, not even charge, nothing happend, when it goes out, and relit, the phone was connected perfectly fine, and loaded, this worked only once since then repeated the same process, and it did not work, now only charge when the battery reaches to 0%, and the phone does not turn off when I press the power off, only restarts, comes to the screen where advertised sony, and again restart,, the phone is running android 5.1.1 lollipop, and I tried to hard reset 2 times, download the full phone battery and give it charge, dont know what else to do, I need help if someone has happened something like this, greetings and thanks.
Sorry for my english...
My recommendation: Warranty repair/ replacement
Have you got Sony PC Companion installed?
What usb driver is installed? Did the PCC install the MTP driver on computers you connected to?
Check device manager on you PC when you connect your phone to it and see if it recognises your phone correctly otherwise try uninstalling the usb driver and connecting your phone once the Sony PC companion has installed the necessary drivers.
Also try factory resetting if you can see if that helps
I have windows 10 installed on my pc with all the drivers and, yes, has Sony PC Companion installed too, normally before the problem, i was conect my phone and it made a sound but now do nothing,, i try the factory reset twice and the problem persist, maybe the phone has drivers too and was corrupted somehow, all that is the PC problem, the other one is the charger problem....
i conect the phone to de charger and nothing happend same like PC, no charging at all, the only way to charge the phone is it gets out of power completely, dead, thats the only way to charge it but the battery is suffering with that way
ok Hey
i have an LG G3 beat (D722)
So i wanted to install a rom and i just missed all up and destory everything and clicked the worng stuff
so now im turning my phone on and its saying
[670] fastboot_init( )
[770] USB init ept @ 0x1001e000
[790] udc_start
i tryed to click every bottom in my phone and its does nothing
i tryed to power+volum down
and power+volum up
and both
nothing works
and then i tryed to connect it to a computer and its just not connected and the pc cant reconize it and its not saying anything or showing that something is connect to the pc
i tryed to do it in 3 differents computers
and i know that its not like my phone screen is freezing cuz it typing more things on the phone when i connect it to the computer
i also cheaked that the drivers was updated
i will be really thxfull if someone know how to fix it
thx
Mat
Well. I have only 1 idea about that and that is to. Mobile software. Shop he can. Take out u from this situation