I really want to use this kernel and try these settings: http://forum.xda-developers.com/showpost.php?p=26755476&postcount=850 for better battery life.
However, i know that flashing this kernel will cause me to brick.
So my question is, Is there any kernel for the Epic 4g Touch that is equivalent to the SiyahKernel that will allow me to use the settings in the thread posted above??
Thanks..
Closest one I've seen with those features is the BLU KUBAN kernel but it's only for touchwiz roms. Siyah kernel I believe works for both AOSP and Touchwiz. So if your looking for that then no we don't have any.
Sent from my SPH-D710 using Tapatalk 2
sol_671 said:
Closest one I've seen with those features is the BLU KUBAN kernel but it's only for touchwiz roms. Siyah kernel I believe works for both AOSP and Touchwiz. So if your looking for that then no we don't have any.
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the quick reply!
Damn...Well what kernel would you recommend to use on akop,cm10,asop,etc roms? Governor?
If you mean jellybean kernels only the one in your rom. There are no others.
sent from my BAD A$$ Epic touch
^^ what he said, no dev is working on just AOSP kernel alone to add those nice fancy tweaks, they're rather focused on making the whole Rom stable ,then additional tweaks come later, plus we have no source for jelly bean.
Sent from my Nexus 7 using Tapatalk 2
OmegaBlaze said:
Thanks for the quick reply!
Damn...Well what kernel would you recommend to use on akop,cm10,asop,etc roms? Governor?
Click to expand...
Click to collapse
If you're on JB try pegasus governor.. Noop io scheduler
And use the kernel that comes with the rom
-TeaM VeNuM Like A Boss
Related
Where are the custom kernels with UV and all the cool features at?
Sent from my SPH-D710 using XDA
The devs are still waiting on kernel source.
Sent on Blend ICS "Goodness" 10.0 using Tapatalk 2
donsh00tmesanta said:
Where are the customer kernels with UV and all the cool features at?
Sent from my SPH-D710 using XDA
Click to expand...
Click to collapse
Bored again huh?
So for now only stock kernels?
Sent from my SPH-D710 using XDA
They are all running Android Gingerbread.
Any good kernel to use with Calk's 3.0 and any good modem?
Sent from Epic Touch !
ankurisbak said:
Any good kernel to use with Calk's 3.0 and any good modem?
Click to expand...
Click to collapse
Everyone has a different experience with the modems and the kernels too. You will have to experiment. Calkulin's GB 3.0 comes with a modified Rogue Gunslinger 1.4.1 kernel.
Located here are most of the Rogue stock and custom kernels:
http://www.android.net/forum/downloa...=&do=cat&id=20
Here are the custom rogue kernels that are missing, scroll down to -Archives-:
http://forum.xda-developers.com/show...ght=team+rogue
Most users prefer the custom kernels since they offer more support than the stock kernels.
Okay,let me experiment and get Back. Thanx
Sent from Epic Touch !
What are some of your deadly combinations in terms of JB ROMs and kernels for the GNex?
I've got:
ROM: Jellybro CM10
Kernel: Jame Bond 3.3
Never encountered anything better than this.
Jellybro + Kejar gapps + Franco kernel
Sent from my Galaxy Nexus using Tapatalk 2
None... there isnt one.
Sent From My Toro+ via SkyBlue Tapatalk
Paranoid Android. It's the best of all worlds.
My rom plus my kernel ! By far the best!
Sent from my Galaxy Nexus using xda premium
ÜBER™ said:
None... there isnt one.
Sent From My Toro+ via SkyBlue Tapatalk
Click to expand...
Click to collapse
+1 Really haven't found something like what I had on ICE (Rascream + Franco). So far I've tried SuperRom, AndroidME, Thunderstick and Bigxies Stock ROM all of them with Trinity Kernel and Franco Kernel.
James Bond 3.3, Air Kernel r177, Franco 223 are all super smooth for me on the latest Modaco JR4.
Sent from my Galaxy Nexus using Tapatalk 2
XenonHD with james bond
Jellin' like a felon
CM10 [jellybro] + kernel of your choice (franco or trinity)
I was using black jelly bean + Franco. Was smooth and fast! Loving the dark theme.
But I just switched to CM10Hybrid ParanoidAndroid 1.8
Using the tablet mode. Its a nice change. Different. Paired it with Trinity 537GPU alpha32. I like! Then I just added the paranoid darkness blue theme. That was the icing on the cake.
I'm new to ROMs. Is trinity the only kernel that has a blue tint to it? I feel like i can't go back to the yellowish stock tint. Lol
MoDaCo latest with Franco kernel..
No bugs, no lag and more importantly no slow downs over time.
Sent from my Galaxy Nexus using XDA Premium App
Stock ROM + Stock Kernel
tameracingdriver said:
Stock ROM + Stock Kernel
Click to expand...
Click to collapse
No bugs no lags?!
juiceon said:
No bugs no lags?!
Click to expand...
Click to collapse
Why would the stock ROM have lag? Everyone seems to have this assumption that your average dude who does some Android development in the spare time that his real job affords him will make a better ROM/kernel than Google's highly skilled engineers that do this as their full time job. Stock ROM is awesome. Custom ROMs and kernels aren't needed to reduce lag or anything like that but to use different mods or features that are not part of stock. Everyone will say this and that kernel gives them better battery life but I really don't think undervolting or whatever has much of an effect. It's all about the screen and your connection quality. And of course how often you're waking your phone and using it.
Right now the stock ota with the trinity kernel is amazing!
sent from my Galaxy Nexus running official Jelly Bean!!!!
Running fitsnugly's CM10 jellybro and the kernel that came with it.
It's lovely!
Just run what I'm running... smh, he didn't ask.what everybody was running.
Sent From My Toro+ via SkyBlue Tapatalk
There is no possible way to answer this question. The only way to find what's "best" is to try them for yourself.
Closed
I know everyone in this community hates questions like this, so I apologize. I'm currently on Blazer's ICS rom and loving it, but was just wanting everyone else's input on what they like. I'm not asking which is the best, that isn't a thread like that, I just want to know what you guys are running.
I like Touchwiz based ROM's opposed to the AOSP style (Dunno why, I just appreciate the Samsung nonsense). I tried Blu Kuban but was having issues with it being sluggish, and I know it's not the ROM's fault, it was most likely the way I had the CPU settings tweaked, but I couldn't seem to get them right. I was also am not a huge fan of overly theme'd ROM's. I like the ICS blue in the status bar and things like that, but when EVERY app is theme'd, it gets old.
Anyways, what are you guys running? If you could post your Kernel as well, that would be much appreciated. :silly:
Vanberge's re calked 0.1.7 with kuban kernel.
Sent from my SPH-D710 using xda app-developers app
BluesRulez said:
Vanberge's re calked 0.1.7 with kuban kernel.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Does it run pretty smooth with that kernel? I'll try flashing that kernel on Blazer again tonight and see if I can configure it decently. I am on Agat's right now, and it's doing well. I need to do more research as to what all of the Governors do. There are a ton on that kernel, and a lot of them I have never heard of.
GeneralSky2004 said:
Does it run pretty smooth with that kernel? I'll try flashing that kernel on Blazer again tonight and see if I can configure it decently. I am on Agat's right now, and it's doing well. I need to do more research as to what all of the Governors do. There are a ton on that kernel, and a lot of them I have never heard of.
Click to expand...
Click to collapse
If you go to the Kuban kernel thread he explains what the governors do in the post on Page number 1
-Sent From My Blu Kuban Tapatalk Like A Boss
Its the best kernel I have used so far.
Sent from my SPH-D710 using xda app-developers app
Yep, blue kuban
Sent from my SPH-D710 using xda app-developers app
Aokp, cm9, aosp ics. Or cm10 or aosp jb. I prefer the stock android look without mfg skinned UIs. I'm on aokp m6 ics right now, have been on one version or another since TCP started porting it in march. I use blu kuban to flash to to do prl and profile updates every so often but never stay on twiz roms more than 10 mins. On m6 I use the stock kernel times included, but have tried some of chris41gs kernels, however they broke a few things cuz i flashed them over an already set up rom instead of flashing them after a clean install, and the m6 I'm on has the internal and external SD locations switched around which confused the kernel and broke my SD storage so i went back to the stock kernel on this build til i decide to switch to another rom and do a clean install and start over from scratch
We are legion, for we are many.
Sent from the DarkSide of the GalaXy with a MEK device
Hey guys,
recently rooted my phone (for the first time) and flashed CM10. I've been reading about Kernels and how they can improve battery life and performance and stuff.
I haven't really understood how a kernel would work. Can I just flash it like how I flashed a ROM? Would it 'delete' my earlier CM10 kernel?
Which kernels are compatible with CM10? Which is the best for battery life and snappiness of the processor?
I've heard of Lean,PopcornKernal, and of course, francos.
Thanks,
Sahil
All of them are good. There isn't a best kernel. You should really stay away from asking those questions. And if you don't tune the kernel there is no way to get any difference than from stock.
Sent From My Toro+ via RED Tapatalk
Im not sure if cm10 requires its own set of kernels but my phone liked the air kernel (ran cooler) and lean (as a bonus removed the purply tint at lower brightness)
--------------
God is an invention by people with nowhere else to turn
ÜBER™ said:
All of them are good. There isn't a best kernel. You should really stay away from asking those questions. And if you don't tune the kernel there is no way to get any difference than from stock.
Sent From My Toro+ via RED Tapatalk
Click to expand...
Click to collapse
Please explain how you tube your kernel.
Sent from my Galaxy Nexus using Tapatalk 2
jakeneal22 said:
Please explain how you tube your kernel.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
depends on the kernel, on the device and on the user.
mpu/core/iva voltages, smartreflex and color control are a few examples.
Sent from my i9250
SahilC said:
I haven't really understood how a kernel would work. Can I just flash it like how I flashed a ROM? Would it 'delete' my earlier CM10 kernel?
Click to expand...
Click to collapse
kernels are like the engine to a car/rom. They're pretty much what manages and drives everything, whereas the rom is like the entire OS.
Every ROM comes with a kernel by default but it can be replaced simply by flashing a kernel on top of it. Conversely, flashing a rom will replace whatever kernel you're running now with the rom's kernel.
jakeneal22 said:
Please explain how you tube your kernel.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Many kernels come with their apps (which can be found in their threads), or some apps might have access to some properties. Also, some roms (cm comes to mind) have access to some properties of some kernels, though there was a recent fuss made about incompatibility so its not perfect.
Franco Kernel
Hey guys! I want to root my GN and I'm a bit confused about what Kernel use...
I have seen this: http://forum.xda-developers.com/showthread.php?t=1367341
Did anyone try the newest version of Franco Kernel (r292)? What's about stability, battery drains, lags... ?
I'd recommend trying Franco's kernel out, it is supported by a nice updater app that can auto-flash the kernel and keep you informed of updates. Doing a bit of research yourself is also always recommended here - this site is for learning about your device. Good luck!
James bond kernal claims to be best in battry life , bt acc. To me trinity alpha 67 with setcpu profiles provide best results.
PoorOldMoot said:
I'd recommend trying Franco's kernel out, it is supported by a nice updater app that can auto-flash the kernel and keep you informed of updates. Doing a bit of research yourself is also always recommended here - this site is for learning about your device. Good luck!
Click to expand...
Click to collapse
OK thanks! I'll test it as soon as!
The Best trinity alpha 67 for 4.1.2. .
Sent from my Galaxy Nexus using xda premium
Hi all! On the behalf of Synergy Team & Ziggy!
Zigg471 Well known for his work! I'm part of his SynergyTeam! Last night he made me a kernel for d2att Galaxy S3 SGH-I747! Gave me perms to post it up! So Everything Goes to Ziggy! I tested it ! It works! So Huge thanks to him!
Initial Release :
Features :
FOR TW ROMS
Here's a down and dirty log
Based originally off of the Sprint JB Source, updated with a few items from the VZW JB release
OC'd to 1.9GHz
Undervolted slightly
sysfs vdd interface
Lagfree and SmartAssv2, both with full sysfs interface
FastCharge, default is off
exFat /should/ work, worked on a 4GB card, 64GB is in route
Plenty of other tweaks in the config files, and more to come! etc etc
Other features..? Just let me know and we will work it out!
Download & Source Links at #2!
Kindly! If you wanna donate to Ziggy ! Here
Hit Thanks If You Like To!
Download & Source Links! Changelogs !
Project Page :- http://projects.ziggy471.com/projects/ziggy471-sgs3-jb
Source : http://projects.ziggy471.com/projects/ziggy471-sgs3-jb/repository
Download : http://projects.ziggy471.com/projects/ziggy471-sgs3-jb/files
Changelog :-
Cheers..!
Just in case!
Teaser : SynergyRom is on the way..
Me & Eschelon (SynergyRom for VZW GS3) are working on it..
first...
worth trying
Is this for ics, tw, jellybean 4.1.2, 4.2.1? Probably need to let people know.
Sent from my SGH-I747 using Tapatalk 2
Just tried it on cm10.1 and wouldn't boot up. Had to restore from recovery.
Sent from my SAMSUNG-SGH-I747
It's For TouchWiz Roms! I tested it on 4.1.1!
Can't wait to try this on my s3.I remember doggy kernels from the EVO 3d days
Sent from my HTC One XL using xda premium
---------- Post added at 11:15 AM ---------- Previous post was at 11:14 AM ----------
Ziggy
Sent from my HTC One XL using xda premium
glad to see a variety of new devs for this device was getting kinda bored with the same old roms and shi, totally gonna tryout the kernel thanks!
Gordietm said:
Just tried it on cm10.1 and wouldn't boot up. Had to restore from recovery.
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
From OP:
"Based originally off of the Sprint JB Source, updated with a few items from the VZW JB release."
Thanks Eaglerazor! Nice to see Ziggys work again. He had the best kernel for the HTC TBOLT.
Is there way to enable FastCharging?
nklenchik said:
From OP:
"Based originally off of the Sprint JB Source, updated with a few items from the VZW JB release."
Click to expand...
Click to collapse
That doesn't indicate if its CM or TW. CM kernels are based on source from Samsung same as TW. OP should be updated to indicate TW-based kernel which I see has been done.
eaglerazor123 said:
FOR TW ROMS
Click to expand...
Click to collapse
InstigatorX said:
That doesn't indicate if its CM or TW. CM kernels are based on source from Samsung same as TW. OP should be updated to indicate TW-based kernel.
Click to expand...
Click to collapse
For me that means TW only roms
CheateR92 said:
For me that means TW only roms
Click to expand...
Click to collapse
Agreed :good:
I just done some benchmark tests and they are pretty good in terms stock or ktoonsez kernel ( I've tried few configs about KT, but nothing like this one ) So the results are:
Quadrant: 6653
AnTuTu: 10469
Vellamo: Metal 627, HTML5 1889
20mins (on screen) doing benchmarks 5% battery
EDIT: @eaglerazor123 can you add date to the topic? It is easier to check for newer versions
And to ask again is it possible to ON the Fast Charging? In the very first post you say it is off by default so it means it can be enabled?
What app is like ktweaker that I can use with this kernel?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Loved Synergy in the past. Can't wait to give it a shot on here.
dawen said:
What app is like ktweaker that I can use with this kernel?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Voltage Control is a good one.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
dawen said:
What app is like ktweaker that I can use with this kernel?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
I found an app that I use with my nexus 7 called Trickster Mod.. you should check it out gives you a lot of extra options to control the kernel
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2