I was taking my phone in for exchange, and wanted to restore it. So I fire up ODIN, and install a factory image on it. But I forgot to run Triangle Away, and reset the Flash Counter. So now I am trying to re-root the device, by flashing a root injected stock rom from Mr.Robinsons thread. I had tried several other methods, but they didnt work either. Then I wanted to flash triangle away, then re restore back to stock.But the root injected rom, is not working either. Is there a easier method to do this.Or should I just trash this POS Samsung GS 3, and get an IPhone that works.
Crzy
crzytxn said:
I was taking my phone in for exchange, and wanted to restore it. So I fire up ODIN, and install a factory image on it. But I forgot to run Triangle Away, and reset the Flash Counter. So now I am trying to re-root the device, by flashing a root injected stock rom from Mr.Robinsons thread. I had tried several other methods, but they didnt work either. Then I wanted to flash triangle away, then re restore back to stock.But the root injected rom, is not working either. Is there a easier method to do this.Or should I just trash this POS Samsung GS 3, and get an IPhone that works.
Crzy
Click to expand...
Click to collapse
If you're going to run triangle away and just odin back a stock ROM, it shouldn't matter how you root it. Use odin to flash a custom recovery, use recovery to root, just like before they had a root-injected stock rom. Takes all of 5 minutes. Then ODIN back to stock like you wanted.
You checked "Yes this is a question"
That means it goes in Q&A
Please read forum rules before posting
Thread Moved
FNM
Modified Status
Ok, so I was finally able to get the device rooted. I flashed triangle away, to reset the flash counter. But now the device says modified. Is there any fix for that?
Crzytxn
If you Odin back to stock, it shouldn't say that anymore..I could be wrong though
Related
I need to return my Note2, so would like to get it 'back to stock'. No matter what I do, though, it keeps saying 'modified'.
Originally I:
Rooted and installed CWM via the Toolkit
Installed de-bloated ROM
As an attempt to get it back to stock I have:
Used CF-AUTO-ROOT to restore stock recovery
Restored stock kernel via Odin
Used Triangle Away to reset counter
Every reboot, though, I keep getting my flash count reset to 1 and it always says modified...
The CF thread mentions that you may need to restore the stock rom, too. Where would I find a stock rom?
Anyone else successful in resetting their 'modified' status?
Jason
http://www.teamandroid.com/2012/09/...e-2-sgh-t889-uvali4-android-411-ota-firmware/
Try to see if you can get the stock firmware from here and flash through odin. I disnt look for a download link so i dont know if its actually there hope it helps
Sent from my SGH-T889 using xda app-developers app
Download stock from here http://forum.xda-developers.com/showthread.php?p=33593344#post33593344
Flash via Odin . CR ROOT + TRIANGLE AWAY+UNROOT
Interested in seeing if this works....
Hey guys, I know there are a few stock images floating around that can bring you back to stock, but I wanted to put down the steps I used to get back to stock with 0 flash counter.
Just in case you need to return it for warranty work and you've flashed or rooted. This is kind of a beginner's guide to going back to stock untouched.
--Doing this is your own responsibility and I offer nothing but what is in this post.
1. Use Odin to flash the stock rom. Found here -teshxx
2. Now use Chainfire's root without different recovery. Found here -Chainfire
3. Now install triangle away via the play store or apk found at Chainfire's thread and use it. Here -Chainfire
4. Finally Odin again with the stock rom found at step 1.
The idea is that booting with a non stock recovery will trip the flash counter. Also, running a rooted rom will register "Modified" with tmobile touchwiz.
This way you can reset the flash counter and it won't be tripped by a non-stock recovery. Then remove the "Modified" device flag by going back to stock.
I know the faster way to do this would be to catch the reboot after triangle away, but if you can do that, I assume you already are pretty proficient at going back for warranty work.
Also, if and when a stock root injected odin rom becomes available, this tutorial will be pointless.
In my days with the s3, even after using odin to go back to fully stock like in step 4, sometimes it woukd still show modified until I ran a factory reset.
I am super sorry if this has been covered, but I have indeed searched, several sites, and I haven't found anything on my specific problem. I had my Galaxy S3 rooted for a time then decided to unroot it. The unroot worked and the phone status now says "normal," but I still cannot receive any OTA updates and my flash counter does not say "0." I suppose my first question is would resetting the flash counter solve the problem with getting the updates? And if so, How can I go about doing that with an already unrooted phone? I searched through the thread here:
http://forum.xda-developers.com/showthread.php?t=1904099
- but was not allowed to post in it since I'm a noob. Thanks for any help.
Use triangle away to reset the flash counter, however you will need to reroot to run triangle away and then unroot again once your finished.
Could always PM the OP of the thread. Sure he wouldnt mind :laugh: That being said, flash the jb version of that rom. Youll be up to date w/ no root and a counter at 0.
Thanks. I'll reroot then follow that thread's guide and use the rom files linked. I know enough about rooting to root, but if I ever run into an issue, I have no idea what I'm doing. We all appreciate your guys' help!
Stupid question, but I want to be sure. I can easily root, then use the triangle away app. But, when I go to unroot, am I just using the JB.zip file from the above mentioned thread and that itself will unroot? Or do I unroot completely first then flash that zip?
Sorry, maybe is offtopic but I need this information badly...
I rooted my GS3 and installed some Incredible HD rom...now, I wanted to get back to stock rom! So, I restored to my Stock rom which I previously backed up in clockwork recovery...Now I have a stock rom but UNABLE to update my phone via KIES or OTA????? It sais > your device curred fw isnt supported ....
What should I do? Should I reset my flash counter or unroot it first before update or what???
THANKSSSS
I recently re-flashed my phone because I was unable to get it back to stock un-rooted so I could get the latest 4.4 update. Someone suggested using Triangle Away to reset my flash counter in order to show my phone was 'not modified'. I purchased Triangle Away installed etc, but it had a stern warning that resetting my flash counter could "hard brick" my phone.
I attempted to use the temporary disable of SU for OTA within Triangle Away to unroot my phone and apply the update, unfortunately the update didn't work and now I can not undo put back SU as enabled. My phone is unrooted without the ability to undo that feature in Triangle Away.
Question, is there a way to fix this with Triangle Away? Am I missing something or do I have to reflash my phone again?
Why would an app like Triangle Away have a feature within it's app that could cause this to happen and not a way to back out of it.
I hope someone can help me with this.:crying:
bigmtnskier said:
I recently re-flashed my phone because I was unable to get it back to stock un-rooted so I could get the latest 4.4 update. Someone suggested using Triangle Away to reset my flash counter in order to show my phone was 'not modified'. I purchased Triangle Away installed etc, but it had a stern warning that resetting my flash counter could "hard brick" my phone.
I attempted to use the temporary disable of SU for OTA within Triangle Away to unroot my phone and apply the update, unfortunately the update didn't work and now I can not undo put back SU as enabled. My phone is unrooted without the ability to undo that feature in Triangle Away.
Question, is there a way to fix this with Triangle Away? Am I missing something or do I have to reflash my phone again?
Why would an app like Triangle Away have a feature within it's app that could cause this to happen and not a way to back out of it.
I hope someone can help me with this.:crying:
Click to expand...
Click to collapse
Maybe I should ask the question more simply:
How do I re-ROOT my phone without flashing? Is that possible?
bigmtnskier said:
Maybe I should ask the question more simply:
How do I re-ROOT my phone without flashing? Is that possible?
Click to expand...
Click to collapse
Do u still have a custom recovery? If so, maybe flash the team epic root from recovery zip?
DMF1977 said:
Do u still have a custom recovery? If so, maybe flash the team epic root from recovery zip?
Click to expand...
Click to collapse
I do have a custom recovery, TWRP. I think I have it running again and rooted, what I did was re-install Busybox and rebooted into recovery, then rebooted back into the System and then it seemed to work fine. Not sure if I will brave Triangle Away again, but thank you for responding and offering a good suggestion.:good:
bigmtnskier said:
I purchased Triangle Away installed etc, but it had a stern warning that resetting my flash counter could "hard brick" my phone.
Click to expand...
Click to collapse
Did you reset your flash counter? As far as I know this was put in place by the developer to warn people...Of knowing what they are doing before hand. This warning is mainly in place to try and make people read to see if their phone model is supported.
To the best of my knowledge, no one has hard bricked their phone on any of the I747(m) models using this app. This feature does work as I have used it multiple times.
And what update our ROM are you installing? You said 4.4... I used ODIN to restore back to complete stock 4.1.1 (not rooted, stock recovery included) and the OTA update to stock 4.1.2 went without a hitch. I used CF Auto Root (via ODIN) to root and then installed a custom recovery.
Sent from my SAMSUNG-SGH-I747
aybarrap1 said:
Did you reset your flash counter? As far as I know this was put in place by the developer to warn people...Of knowing what they are doing before hand. This warning is mainly in place to try and make people read to see if their phone model is supported.
To the best of my knowledge, no one has hard bricked their phone on any of the I747(m) models using this app. This feature does work as I have used it multiple times.
And what update our ROM are you installing? You said 4.4... I used ODIN to restore back to complete stock 4.1.1 (not rooted, stock recovery included) and the OTA update to stock 4.1.2 went without a hitch. I used CF Auto Root (via ODIN) to root and then installed a custom recovery.
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
I was attempting to do the OTA to go from 4.0.4 ICS to 4.1.x Jellybean. BTW, I was able to re-set my count to 0! Thank you for the reassurance!
bigmtnskier said:
I was attempting to do the OTA to go from 4.0.4 ICS to 4.1.x Jellybean. BTW, I was able to re-set my count to 0! Thank you for the reassurance!
Click to expand...
Click to collapse
I would highly recommend flashing the pure stock 4.1.1 rom (including stock recovery) and then do the OTA. The 4.1.2 stock rom might be available through KIES or through other sites by now, but I can't say for certain. Since you are already using ODIN, then CF auto root will be a breeze for you to root 4.1.2.
No worries. I was a little nervous too about Triangle Away at first but searching did not net anything saying that reseting the flash counter had hard bricked someone's phone. That is what pushed me to use it.
aybarrap1 said:
I would highly recommend flashing the pure stock 4.1.1 rom (including stock recovery) and then do the OTA. The 4.1.2 stock rom might be available through KIES or through other sites by now, but I can't say for certain. Since you are already using ODIN, then CF auto root will be a breeze for you to root 4.1.2.
No worries. I was a little nervous too about Triangle Away at first but searching did not net anything saying that reseting the flash counter had hard bricked someone's phone. That is what pushed me to use it.
Click to expand...
Click to collapse
I blew out Kies on my main machine because it doesn't work well, I had to re-set all my USB ports and re-install the Samsung USB drivers so no Kies for me. But where do I find a stock 4.1.1 rom from? My stock version is 4.0.4 (the original ROM when the S3 was released), I wonder if I can just use a custom 4.1.1 ROM instead or do you think it would work if I unroot/stock to 4.0.4 then OTA to 4.1.2?
bigmtnskier said:
I blew out Kies on my main machine because it doesn't work well, I had to re-set all my USB ports and re-install the Samsung USB drivers so no Kies for me. But where do I find a stock 4.1.1 rom from? My stock version is 4.0.4 (the original ROM when the S3 was released), I wonder if I can just use a custom 4.1.1 ROM instead or do you think it would work if I unroot/stock to 4.0.4 then OTA to 4.1.2?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1968625
Flash in Odin..
bigmtnskier said:
I blew out Kies on my main machine because it doesn't work well, I had to re-set all my USB ports and re-install the Samsung USB drivers so no Kies for me. But where do I find a stock 4.1.1 rom from? My stock version is 4.0.4 (the original ROM when the S3 was released), I wonder if I can just use a custom 4.1.1 ROM instead or do you think it would work if I unroot/stock to 4.0.4 then OTA to 4.1.2?
Click to expand...
Click to collapse
To ensure best results use ODIN to flash the stock ROM to 4.1.1. You should return the phone stock as if you just purchased from the store new. Then do the OTA. You can use ODIN after that to root with CF Auto root.
Sent from my SAMSUNG-SGH-I747
Hi, sorry for these noob questions.
I have to send my device back for warranty and I just learned about the flash counter. So used triangle away to set the number back to zero but my phone's device status still says "custom." I read somewhere that a factory reset would be able to change that back to normal. I will try that soon, but I haven't unrooted yet. I was going to flash a stock rom (also read that that would change device status back to "normal") after changing the flash counter number, but wouldn't that change it to 1? How do I unroot without triggering the flash counter? Thanks in advance!
What bootloader are you on?
serio22 said:
What bootloader are you on?
Click to expand...
Click to collapse
how do I check that?
Also, I tried flashing stock firmware with Odin before, but nothing happened except I lost root. And I forgot about the flash counter, so I rooted again and used Triangle Away. What do I do from here? I just went into download mode again, and binary status says "custom" instead of samsung official, even though I just used triangle away.
Can you post a picture of your download screen? Reason I ask is if you got knox bootloader your knox counter is most likely tripped and you can't reset it.. and to get official status you need to be completely stock, the system will check on every boot so no matter how many times you reset it, it will detect custom. You need to run triangle away, reboot straight to download mode and flash back to stock, after that reboot straight into recovery and do a factory reset. Those are the steps if I'm not mistaken
serio22 said:
Can you post a picture of your download screen? Reason I ask is if you got knox bootloader your knox counter is most likely tripped and you can't reset it.. and to get official status you need to be completely stock, the system will check on every boot so no matter how many times you reset it, it will detect custom. You need to run triangle away, reboot straight to download mode and flash back to stock, after that reboot straight into recovery and do a factory reset. Those are the steps if I'm not mistaken
Click to expand...
Click to collapse
do you mean a picture of my download mode screen? basically, this is what it says (I guess typing it out is better, since the words are very small anyways)
Odin Mode
product name: SGH-M919
current binary: custom
system status: custom
CSB-OEM_Config_LSB: 0x30
Write protection: enable
and then there's the big green android, and "downloading.. do not turn off target" under it.
I don't think I have the knox bootloader, because I never upgraded to 4.3. I was always using 4.2.2 android before I flashed a custom rom, and I also don't have the two knox lines showing up. I'm guessing I'm fine as long as I can revert back to original stock and get my phone to stop showing "custom"
I first flashed the stock rom with Odin, then I used triangle away, and then I factory reset it, which is why I don't understand why it still says "custom" in download mode, because I should be on the stock rom already. If I boot into download mode immediately after I use triangle away, it shows "official samsung," but if I try again later, it reverts back to "custom."
If I follow the steps you mentioned, would flashing the stock rom cause the flash counter to go to 1?
No it will not because it is official and unrooted.. was it rooted or did you have custom recovery? Just do it the way I posted and see if that works
serio22 said:
No it will not because it is official and unrooted.. was it rooted or did you have custom recovery? Just do it the way I posted and see if that works
Click to expand...
Click to collapse
your method worked! my phone's device status now says "official" and it no longer says custom when I boot into download mode. So, as long as my phone says those things and I reset the flash counter following your steps, I'll be fine right? Thank you so much!!
Yes.. no problem!
serio22 said:
Yes.. no problem!
Click to expand...
Click to collapse
sorry, I have one more question. you said to boot straight into download mode after using triangle away, so I pressed the top volume button to reboot normally, but then I immediately pulled out the battery, and then booted into download mode. The phone never had a chance to reboot, so there isn't a problem with what I did right?
I did the same thing after flashing. I just pulled out the battery, and then booted into recovery mode.
Thanks again!
Yeah that's not problem, that's actually what you want, to not give the system a chance to boot at all
serio22 said:
Yeah that's not problem, that's actually what you want, to not give the system a chance to boot at all
Click to expand...
Click to collapse
okay, again, thanks a lot!!
lalachata0 said:
okay, again, thanks a lot!!
Click to expand...
Click to collapse
I am trying to do something similar. I want to reset counter but it does not stick. ie when I use triangle away then reboot it still shows the count as 10.
Is there any way to get a stock kernel?
I am running stock rom that is rooted but kernel does not appear to be stock.
Right now I am looking for zip flashable NB4 kernel??
Looked for hours and cant find.
Or also would like any hints on how to get triangle reset to stick.
Thanks
shortbus1234 said:
I am trying to do something similar. I want to reset counter but it does not stick. ie when I use triangle away then reboot it still shows the count as 10.
Is there any way to get a stock kernel?
I am running stock rom that is rooted but kernel does not appear to be stock.
Right now I am looking for zip flashable NB4 kernel??
Looked for hours and cant find.
Or also would like any hints on how to get triangle reset to stick.
Thanks
Click to expand...
Click to collapse
I'm pretty sure you need to be on the stock kernal and recovery in order for triangle away to work. Maybe you should try flashing the stock rom, reroot and then use triangle away? that's what I did, because I wasn't using the stock samsung firmware
I flashed stock Firmware. It took 2 times with ODIN. The first flash added knox then I had to flash a second time to reinstall everything else. I now have a Knox 0x0 rooted phone. I was curious so I used towelroot and rooted the phone. Still 0x0 and root was succesful. I installed triangle away and it showed the counter was at 0.
Just unrooted and I will take back to tmobile to replace under warranty.
What they don't know will not hurt them.
It would encourage everyone wishing to have root to look into and support towelroot. It works great!!!!
Knox will still be tripped 0x1 if you flash custom ROM......but IMO it is worth it