I searched around for the differences between the I747 and I747M, and apparently it is the location... That brings up my question.
I got an I747M, but live in the US and am with AT&T. Should I be worried about anything?
Thanks!
EDIT: I have found that it is because I flashed KyanROM, which changed it from I747 to I747M. Is there any way to revert this change? I did try to change it in the build.prop, like a bunch of places said, but when I did, the phone would get to the Samsung screen the crash. I did a nandroid restore and everything was fine, except it is still showing I747M.
Nope.
Sent from my SAMSUNG-SGH-I747 using xda premium
Did you install Kyan ROM?
Sent from my SGH-I747 using xda premium
Ends said:
Nope.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Hey man, thanks for the info.
Is it common that this happens? Should I be downloading AT&T stuff, or I747M stuff, or are they the same always?
Thanks again.
d3athsd00r said:
Did you install Kyan ROM?
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Actually yes, why do you ask?
bigal1542 said:
Hey man, thanks for the info.
Is it common that this happens? Should I be downloading AT&T stuff, or I747M stuff, or are they the same always?
Thanks again.
Click to expand...
Click to collapse
you should be ok. No worries
Sent from my SAMSUNG-SGH-I747 using xda premium
Ends said:
you should be ok. No worries
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
So what modem would I flash? The I747 or the I747M?
Sent from my SGH-I747M using xda premium
It is no big deal I am with rogers and I flash i747 ROM all the times on my i747m
If a flash aokp or cm10 it shows i747 but if I flash stock it shows i747m. It doesn't change your modem or anything.
Sent from my SGH-I747 using xda app-developers app
bigal1542 said:
So what modem would I flash? The I747 or the I747M?
Sent from my SGH-I747M using xda premium
Click to expand...
Click to collapse
Flash only modems that are for your carrier.
The reason I asked that is because Kyan ROM is based on the 747m firmware. It still works with the 747, but the build.prop shows it as a 747m.
Sent from my SGH-I747 using xda premium
d3athsd00r said:
The reason I asked that is because Kyan ROM is based on the 747m firmware. It still works with the 747, but the build.prop shows it as a 747m.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Exactly. Look at the title in the Kyan forum... notice the M after the 747?.. so.. youve entered the world of ROMs?.. time to study!! Read read and read again my friend or youll get flamed like crazy around these parts. The answer to this question and probably all your questions are available in Kyans forum.. theres a thing called the OP that has all the info you need about the ROM you flash.. make sure you read it in its entirety atleast twice before flashing , sop. The OP is the very first post.. also, how to get around your issue and get the AT&T bloat back is also found in that forum.. theres a search function that will reveal all your questions and dreams.. its like magic except its just the search function.
Sent from my SGSIII
Thanks guys, I feel a little bit better about it now.
I am only worried about the model number, because I can't download any of the AT&T stuff from the market because it is restricted from I747M's (as they are Canadian, and AT&T has no use on those devices). Is there any way to change it back to I747 and get rid of the M? @daddymatt, I have spent a good 30 minutes searching, and can't find any way to revert it.
I did try to change it in the build.prop, like a bunch of places said, but when I did, the phone would get to the Samsung screen the crash. I did a nandroid restore and everything was fine, except it is still showing I747M.
Also, I will give thanks when I can. I am at my current daily limit now, so no worries, I haven't missed you.
You will need to use a i747 based ROM.
Sent from my SGH-I747 using xda app-developers app
Or just edit the build.prop to say a 747
Sent from my SGH-I747 using xda premium
d3athsd00r said:
Or just edit the build.prop to say a 747
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
You may want to read his post again.
Sent from my SGH-I747 using xda app-developers app
bigal1542 said:
Thanks guys, I feel a little bit better about it now.
I am only worried about the model number, because I can't download any of the AT&T stuff from the market because it is restricted from I747M's (as they are Canadian, and AT&T has no use on those devices). Is there any way to change it back to I747 and get rid of the M? @daddymatt, I have spent a good 30 minutes searching, and can't find any way to revert it.
I did try to change it in the build.prop, like a bunch of places said, but when I did, the phone would get to the Samsung screen the crash. I did a nandroid restore and everything was fine, except it is still showing I747M.
Also, I will give thanks when I can. I am at my current daily limit now, so no worries, I haven't missed you.
Click to expand...
Click to collapse
You've just made a mistake editing the build.prop. keep trying. Just keep a good nandroid handy. I don't know the exact edits because i haven't the need to do it, but i know your on the right track.
Sent from my SAMSUNG-SGH-I747 using xda premium
Ends said:
You've just made a mistake editing the build.prop. keep trying. Just keep a good nandroid handy. I don't know the exact edits because i haven't the need to do it, but i know your on the right track.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
I've tried so many things, I just don't know anymore. I have tried just about everything I have found online too. I am even doing a cache clear before and after changing it.
If you have a link or ideas of what to change, please let me know. I am about to give up because I honestly have no idea where to go from here.
I will give ya thanks when I can too, I hit my daily max :/
Try changing device id to I9300 instead of I747. It's the international version and will serve the same purpose. Don't know for sure if this'll work, but i think I've seen it somewhere else.
Sent from my SAMSUNG-SGH-I747 using xda premium
I don't think it will work. Att uses i747m not the international version
Sent from my SGH-I747 using xda app-developers app
How many lines in the build.prop did you change? I had to change 4 in order to get Bell mobile tv working while running an AT&T rom. Try this, change
- ro.product.name=d2att
- ro.product.device=d2att
- ro.product.model=SGH-I747
- ro.build.product=d2att
This should make your phone think it's an AT&T phone again, remember keep a nandroid handy just in case...
I'm using Wicked's JB v.4 ROM, but I've been doing some research to try and get my AllShare Cast dongle working and some peeps said flash the LH9 modem, so I'm going to try it, but I can't seem to find the modem alone. I'd like to keep my ROM.
Any help is appreciated.
Thanks,
This is the thread that I thought was complete but I don't see LH9 there.
http://forum.xda-developers.com/showthread.php?t=1880987
Do you know what carrier / country / firmware LH9 is for? Might help tracking it down.
That is not a T-Mobile S3 modem.. Check the AT&T forums
Sent from my SGH-T999 using xda premium
ktetreault14 said:
That is not a T-Mobile S3 modem.. Check the AT&T forums
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Yeah, I just saw that. FML.
Hi guys,
I'm trying to unlock my AT&T 4.1.2 Note II, and from this thread, it says that unlocking is dependent on the version of baseband, and a UVALK8 baseband phone could be unlocked even if it's on 4.1.2.
Therefore, I'd like to know if there is a guide on how to restore baseband? My current baseband is UCAMC3, 4.1.2, non-rooted.
Much help appreciated!
You might get a better response in the At&t thread. You are in the Sprint forums.
Sent from my SPH-L900 using xda premium
cmdauria said:
You might get a better response in the At&t thread. You are in the Sprint forums.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
Oops, new to the forum. Thanks!
I just got the jedi x15 rom and I can't make calls and my imei says 0. What is going on my phone is keep searching but can't find a service. Someone told me to download md1 modem and this happened. I have Canadian mobilicity note 2.
Sent from my SGH-T889 using xda app-developers app
Help
sofia-captivate said:
I just got the jedi x15 rom and I can't make calls and my imei says 0. What is going on my phone is keep searching but can't find a service. Someone told me to download md1 modem and this happened. I have Canadian mobilicity note 2.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Jedi X15 has 5 Modem i do believe you can dirty flash ( don't wipe the phone) using each modem until you get one that works. If you know what Modem you had before you flashed the MD1 modem you can flash that Modem back to the device the same way.
I hope this helps you
sofia-captivate said:
I just got the jedi x15 rom and I can't make calls and my imei says 0. What is going on my phone is keep searching but can't find a service. Someone told me to download md1 modem and this happened. I have Canadian mobilicity note 2.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
Before you start doing anything you have to fix your IMEI.
Do a search on Note 2 forum on how to do that. There is a very good thread about that and includes all the necessary tools to do it.
I'm at work, so I can't search for you.
Good luck.
Sent from my SGH-T889 using xda premium
Get a hold of darksado. I'm on vacation and don't have access to my pc at home. If it's not fixed by the weekend pm me. Sorry I can't help
Sent from my SGH-T889 using Tapatalk 4 Beta
Greeting all. I am running a Galaxy Note II stock/rooted AT&T 4.1.2.
My signal seems to drop out frequently when I am traveling and I was wondering if there were a better (subjective I know) modem than the stock one. Thought I would give it a try to see if it helps ease my signal drop.
go to the modem thread and try a different one out
What modem are you using?
Sent from my SAMSUNG-SGH-I317 using xda premium
terpin32 said:
What modem are you using?
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
What ever modem came with MrRobinson's root injected factory stock ATT Rom. I believe it is I317ucamc3.
wase4711 said:
go to the modem thread and try a different one out
Click to expand...
Click to collapse
If I am looking at the right thread ( http://forum.xda-developers.com/showthread.php?t=1986480 ) there appears to only be one other modem for ATT (UCALJ2). Am I not looking in the right place?
MC3 is the latest modem, J2 being the first release
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
There's also ma4.
Sent from my Note II...where BIGGER is better!
I get the best speed and signal with mc3
Sent from my SAMSUNG-SGH-I317 using xda premium
Ok. Thanks all. I might give MA4 a try just to see.
TayzGpa said:
What ever modem came with MrRobinson's root injected factory stock ATT Rom. I believe it is I317ucamc3.
Click to expand...
Click to collapse
UCAMA4
Mr. Robinson has not released a root injected UCAMC3 build to my knowledge. ..but I wish he would. ..as it would greatly simplify the return to stock method for this device. .
But the delay from time of release to the posting of builds on the sammobile website is nothing less than ridiculous. .
And I'm sure once they get it. ..Mr. Robinson will create another excellent resource as he always does. ..g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
terpin32 said:
I get the best speed and signal with mc3
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Ditto on MC3