I'm using Wicked's JB v.4 ROM, but I've been doing some research to try and get my AllShare Cast dongle working and some peeps said flash the LH9 modem, so I'm going to try it, but I can't seem to find the modem alone. I'd like to keep my ROM.
Any help is appreciated.
Thanks,
This is the thread that I thought was complete but I don't see LH9 there.
http://forum.xda-developers.com/showthread.php?t=1880987
Do you know what carrier / country / firmware LH9 is for? Might help tracking it down.
That is not a T-Mobile S3 modem.. Check the AT&T forums
Sent from my SGH-T999 using xda premium
ktetreault14 said:
That is not a T-Mobile S3 modem.. Check the AT&T forums
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Yeah, I just saw that. FML.
Related
If anyone could please post or direct me to the FF24 modem for this phone. Long story short after a non locking GPS I used a USC ff18 to get back to stock and for the life of me I can not find this modem anywhere.
jasonc331 said:
If anyone could please post or direct me to the FF24 modem for this phone. Long story short after a non locking GPS I used a USC ff18 to get back to stock and for the life of me I can not find this modem anywhere.
Click to expand...
Click to collapse
Here is the link for the FF24 Stock Kernel, hope this helps :
Thanks actually pulled the modem out of a generic sg2 ff24
Sent from my SCH-R760 using xda app-developers app
Are modem's carrier specific? Even after flashing back to ff24 no data. Apn is correct, and no help from Cspire Wireless.
Sent from my SCH-R760 using xda app-developers app
jasonc331 said:
Are modem's carrier specific? Even after flashing back to ff24 no data. Apn is correct, and no help from Cspire Wireless.
Sent from my SCH-R760 using xda app-developers app
Click to expand...
Click to collapse
don't know but i'm in the same boat.
I searched around for the differences between the I747 and I747M, and apparently it is the location... That brings up my question.
I got an I747M, but live in the US and am with AT&T. Should I be worried about anything?
Thanks!
EDIT: I have found that it is because I flashed KyanROM, which changed it from I747 to I747M. Is there any way to revert this change? I did try to change it in the build.prop, like a bunch of places said, but when I did, the phone would get to the Samsung screen the crash. I did a nandroid restore and everything was fine, except it is still showing I747M.
Nope.
Sent from my SAMSUNG-SGH-I747 using xda premium
Did you install Kyan ROM?
Sent from my SGH-I747 using xda premium
Ends said:
Nope.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Hey man, thanks for the info.
Is it common that this happens? Should I be downloading AT&T stuff, or I747M stuff, or are they the same always?
Thanks again.
d3athsd00r said:
Did you install Kyan ROM?
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Actually yes, why do you ask?
bigal1542 said:
Hey man, thanks for the info.
Is it common that this happens? Should I be downloading AT&T stuff, or I747M stuff, or are they the same always?
Thanks again.
Click to expand...
Click to collapse
you should be ok. No worries
Sent from my SAMSUNG-SGH-I747 using xda premium
Ends said:
you should be ok. No worries
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
So what modem would I flash? The I747 or the I747M?
Sent from my SGH-I747M using xda premium
It is no big deal I am with rogers and I flash i747 ROM all the times on my i747m
If a flash aokp or cm10 it shows i747 but if I flash stock it shows i747m. It doesn't change your modem or anything.
Sent from my SGH-I747 using xda app-developers app
bigal1542 said:
So what modem would I flash? The I747 or the I747M?
Sent from my SGH-I747M using xda premium
Click to expand...
Click to collapse
Flash only modems that are for your carrier.
The reason I asked that is because Kyan ROM is based on the 747m firmware. It still works with the 747, but the build.prop shows it as a 747m.
Sent from my SGH-I747 using xda premium
d3athsd00r said:
The reason I asked that is because Kyan ROM is based on the 747m firmware. It still works with the 747, but the build.prop shows it as a 747m.
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
Exactly. Look at the title in the Kyan forum... notice the M after the 747?.. so.. youve entered the world of ROMs?.. time to study!! Read read and read again my friend or youll get flamed like crazy around these parts. The answer to this question and probably all your questions are available in Kyans forum.. theres a thing called the OP that has all the info you need about the ROM you flash.. make sure you read it in its entirety atleast twice before flashing , sop. The OP is the very first post.. also, how to get around your issue and get the AT&T bloat back is also found in that forum.. theres a search function that will reveal all your questions and dreams.. its like magic except its just the search function.
Sent from my SGSIII
Thanks guys, I feel a little bit better about it now.
I am only worried about the model number, because I can't download any of the AT&T stuff from the market because it is restricted from I747M's (as they are Canadian, and AT&T has no use on those devices). Is there any way to change it back to I747 and get rid of the M? @daddymatt, I have spent a good 30 minutes searching, and can't find any way to revert it.
I did try to change it in the build.prop, like a bunch of places said, but when I did, the phone would get to the Samsung screen the crash. I did a nandroid restore and everything was fine, except it is still showing I747M.
Also, I will give thanks when I can. I am at my current daily limit now, so no worries, I haven't missed you.
You will need to use a i747 based ROM.
Sent from my SGH-I747 using xda app-developers app
Or just edit the build.prop to say a 747
Sent from my SGH-I747 using xda premium
d3athsd00r said:
Or just edit the build.prop to say a 747
Sent from my SGH-I747 using xda premium
Click to expand...
Click to collapse
You may want to read his post again.
Sent from my SGH-I747 using xda app-developers app
bigal1542 said:
Thanks guys, I feel a little bit better about it now.
I am only worried about the model number, because I can't download any of the AT&T stuff from the market because it is restricted from I747M's (as they are Canadian, and AT&T has no use on those devices). Is there any way to change it back to I747 and get rid of the M? @daddymatt, I have spent a good 30 minutes searching, and can't find any way to revert it.
I did try to change it in the build.prop, like a bunch of places said, but when I did, the phone would get to the Samsung screen the crash. I did a nandroid restore and everything was fine, except it is still showing I747M.
Also, I will give thanks when I can. I am at my current daily limit now, so no worries, I haven't missed you.
Click to expand...
Click to collapse
You've just made a mistake editing the build.prop. keep trying. Just keep a good nandroid handy. I don't know the exact edits because i haven't the need to do it, but i know your on the right track.
Sent from my SAMSUNG-SGH-I747 using xda premium
Ends said:
You've just made a mistake editing the build.prop. keep trying. Just keep a good nandroid handy. I don't know the exact edits because i haven't the need to do it, but i know your on the right track.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
I've tried so many things, I just don't know anymore. I have tried just about everything I have found online too. I am even doing a cache clear before and after changing it.
If you have a link or ideas of what to change, please let me know. I am about to give up because I honestly have no idea where to go from here.
I will give ya thanks when I can too, I hit my daily max :/
Try changing device id to I9300 instead of I747. It's the international version and will serve the same purpose. Don't know for sure if this'll work, but i think I've seen it somewhere else.
Sent from my SAMSUNG-SGH-I747 using xda premium
I don't think it will work. Att uses i747m not the international version
Sent from my SGH-I747 using xda app-developers app
How many lines in the build.prop did you change? I had to change 4 in order to get Bell mobile tv working while running an AT&T rom. Try this, change
- ro.product.name=d2att
- ro.product.device=d2att
- ro.product.model=SGH-I747
- ro.build.product=d2att
This should make your phone think it's an AT&T phone again, remember keep a nandroid handy just in case...
So I've got the AT&T Note 2 unlocked through a code from them.
The AWS unlock band works great with my T-mobile plan.
Except my software is at 4.1.1, I can't update without a sim or with the T-mobile one.
Anyone know of a trick or way to do the software update for this AT&T phone
Thanks
Download from Sam mobile.com
Sent from my SGH-I317M using xda premium
I think I need a AT&T account to download, which I don't have since Im a t-mobile customer. thanks
No u need to make a samsung acct
Sent from my SGH-I317M using xda premium
mobile.com takes me straight to AT&T
twanskys204 said:
No u need to make a samsung acct
Sent from my SGH-I317M using xda premium
Click to expand...
Click to collapse
nevermind you meant sammobile.com - i thought it said download SAM from mobile.com
joogle said:
mobile.com takes me straight to AT&T
Click to expand...
Click to collapse
Just a follow up I go to this site:
http://www.sammobile.com/firmwares/1/?model=SGH-I317&pcode=ATT#firmware
I see one firmware there from October 2012, is that the 4.1.2 version? I don't see any version number in the listing on the web page
Yes... U might hafto make an account... Dl your firmware and flash in odin
Sent from my SGH-I317M using xda premium
There must be a easier way though, for AT&T customers who had trouble with OTA update, im sure they probably providd a procedure for a direct update through some software
twanskys204 said:
Yes... U might hafto make an account... Dl your firmware and flash in odin
Sent from my SGH-I317M using xda premium
Click to expand...
Click to collapse
I guess I need to find someone with a AT&T Sim and then try the download
Forget stock roms. Just flash as AOKP rom. It's much better.
http://www.sammobile.com/firmwares/
Sent from my SGH-I317M using xda premium
Thanks but that link does not have the firmware for AT&T Note 2 4.1.2
twanskys204 said:
http://www.sammobile.com/firmwares/
Sent from my SGH-I317M using xda premium
Click to expand...
Click to collapse
You sure about the that? Lol.. look harder
Sent from my SGH-I317M using xda premium
yeah im pretty sure there is only one from OCtober for AT&T SGH-I317
twanskys204 said:
You sure about the that? Lol.. look harder
Sent from my SGH-I317M using xda premium
Click to expand...
Click to collapse
I'll have a look for ya
Well had a look and I can't find it either...weird... should b on that site
Sent from my SGH-I317M using xda premium
so im still looking for the updated AT&T stock rom.
im using AT&T Note 2 on T-mobile but would like the multi window feature, etc. I am rooted, prefer to use the stock roms due to less issues vs testing custom roms.
joogle said:
so im still looking for the updated AT&T stock rom.
im using AT&T Note 2 on T-mobile but would like the multi window feature, etc. I am rooted, prefer to use the stock roms due to less issues vs testing custom roms.
Click to expand...
Click to collapse
Wait here...i'll get it for you...g
Edit:http://forum.xda-developers.com/showthread.php?t=2004650
This thread will give you an Odin flashable UCAMA4 build. (top of page).
You will get all of the updated info. (radio etc.) Happy Odin'ing.....g
Wait...here is the direct download link...I'm feeling generous today...LOL......g
http://www.androidfilehost.com/?fid=22901594685178627
Thanks for the help.
Yeah I plan on keeping stock AT&T Note 2 rom, but have the AWS band unlock so I can use this on T-mobile.
I am hoping this will move me up to the latest updates and still in keep intact my setup for the T-mobile setup I have running.
gregsarg said:
Wait here...i'll get it for you...g
Edit:http://forum.xda-developers.com/showthread.php?t=2004650
This thread will give you an Odin flashable UCAMA4 build. (top of page).
You will get all of the updated info. (radio etc.) Happy Odin'ing.....g
Wait...here is the direct download link...I'm feeling generous today...LOL......g
http://www.androidfilehost.com/?fid=22901594685178627
Click to expand...
Click to collapse
joogle said:
Thanks for the help.
Yeah I plan on keeping stock AT&T Note 2 rom, but have the AWS band unlock so I can use this on T-mobile.
I am hoping this will move me up to the latest updates and still in keep intact my setup for the T-mobile setup I have running.
Click to expand...
Click to collapse
Always welcome...
Keep that file handy for future use...It's a good one.
And it's a great resource to hand over to other users as well.
It is the only stock rom with the updates that we have.....g
Hi there i was just wondering if the roms for the SGH-T999 work on the T999L model?
Yes. Just don't flash anything with a modem or firmware. The kernel should be ok. I'm able to flash the T999L kernel on my T999 so it probably works both ways. Not 100% sure though.
Your wifi/wifi calling may stop working on another rom, but I may have a fix for this, so let me know if it does.
Ill be posting a lot more info on the T999L in my thread too, so keep an eye on it!
Sent from my SGH-T999L using xda premium
DocHoliday77 said:
Yes. Just don't flash anything with a modem or firmware. The kernel should be ok. I'm able to flash the T999L kernel on my T999 so it probably works both ways. Not 100% sure though.
Your wifi/wifi calling may stop working on another rom, but I may have a fix for this, so let me know if it does.
Ill be posting a lot more info on the T999L in my thread too, so keep an eye on it!
Sent from my SGH-T999L using xda premium
Click to expand...
Click to collapse
So there aren't any roms available for the T999L?
Only mine. Well ill be updating links in about a half hour or so when I get home.
Other t999l users have flashed other roms though. You should be fine.
Sent from my SGH-T999L using xda premium
DocHoliday77 said:
Only mine. Well ill be updating links in about a half hour or so when I get home.
Other t999l users have flashed other roms though. You should be fine.
Sent from my SGH-T999L using xda premium
Click to expand...
Click to collapse
what 4.2.2 roms would you recomend?
None. Lol!
Only because they are all cm or aosp based, which I haven't used in a very long time.
Be careful askin for recommendations btw. Quick way to get flamed and thread locked.
Just gotta read the ops and find one that matches what you want.
Sent from my SGH-T999L using xda premium
Greeting all. I am running a Galaxy Note II stock/rooted AT&T 4.1.2.
My signal seems to drop out frequently when I am traveling and I was wondering if there were a better (subjective I know) modem than the stock one. Thought I would give it a try to see if it helps ease my signal drop.
go to the modem thread and try a different one out
What modem are you using?
Sent from my SAMSUNG-SGH-I317 using xda premium
terpin32 said:
What modem are you using?
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
What ever modem came with MrRobinson's root injected factory stock ATT Rom. I believe it is I317ucamc3.
wase4711 said:
go to the modem thread and try a different one out
Click to expand...
Click to collapse
If I am looking at the right thread ( http://forum.xda-developers.com/showthread.php?t=1986480 ) there appears to only be one other modem for ATT (UCALJ2). Am I not looking in the right place?
MC3 is the latest modem, J2 being the first release
Sent from my SAMSUNG-SGH-I317 using Tapatalk 4 Beta
There's also ma4.
Sent from my Note II...where BIGGER is better!
I get the best speed and signal with mc3
Sent from my SAMSUNG-SGH-I317 using xda premium
Ok. Thanks all. I might give MA4 a try just to see.
TayzGpa said:
What ever modem came with MrRobinson's root injected factory stock ATT Rom. I believe it is I317ucamc3.
Click to expand...
Click to collapse
UCAMA4
Mr. Robinson has not released a root injected UCAMC3 build to my knowledge. ..but I wish he would. ..as it would greatly simplify the return to stock method for this device. .
But the delay from time of release to the posting of builds on the sammobile website is nothing less than ridiculous. .
And I'm sure once they get it. ..Mr. Robinson will create another excellent resource as he always does. ..g
Sent from my SAMSUNG-SGH-I317 using XDA Premium HD app
terpin32 said:
I get the best speed and signal with mc3
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Ditto on MC3