[Q] Jelly Bean: installation guide - Wildfire Q&A, Help & Troubleshooting

Hi there,
I read several threads about installation of CM10, unofficial ROMS, and partitioning memory but didnt find any good guide which contains it all at once enabling a simple, smooth installation of JB on Wildfire. Can somebody send a link of such a page if it exists, or simply write a complete guide
Thanks a lot
Christian

You can't find any good guides to install a good working CM10 build, because there aren't any.
The one we currently have is definitely not a daily driver, but the devs are working on fixing that.

Lesicnik1 said:
You can't find any good guides to install a good working CM10 build, because there aren't any.
The one we currently have is definitely not a daily driver, but the devs are working on fixing that.
Click to expand...
Click to collapse
ok. Is there sth similar on CM9?
Thanks!
Christian

cab00 said:
ok. Is there sth similar on CM9?
Thanks!
Christian
Click to expand...
Click to collapse
It shouldn't be any different from installing CM9
Sent from my Wildfire using Tapatalk 2

cab00 said:
ok. Is there sth similar on CM9?
Click to expand...
Click to collapse
Justiceā„¢ said:
It shouldn't be any different from installing CM9
Click to expand...
Click to collapse
well, I think he meant if there was a good guide to install CM9, then...
I suggest to look into some of the ICS threads in the dev section. I believe the most frequented is a good start: [ROM][KANG][IMM76L][v09.20] Non-official CyanogenMod 9 - xda-developers

eventcom said:
well, I think he meant if there was a good guide to install CM9, then...
I suggest to look into some of the ICS threads in the dev section. I believe the most frequented is a good start: [ROM][KANG][IMM76L][v09.20] Non-official CyanogenMod 9 - xda-developers
Click to expand...
Click to collapse
Yes I meant this.
I also found the above thread and read *some* posts but I'm afraid I have to read them all?!?
Christian

cab00 said:
Yes I meant this.
I also found the above thread and read *some* posts but I'm afraid I have to read them all?!?
Christian
Click to expand...
Click to collapse
Read only the first post and it's all
Sent from my HTC Wildfire using xda premium

cab00 said:
Yes I meant this.
I also found the above thread and read *some* posts but I'm afraid I have to read them all?!?
Christian
Click to expand...
Click to collapse
no, of course not all... I'd suggest to read the first post (obviously) because of the instructions. If you have questions then you could use the search box to search directly inside the thread and if that doesn't help or you have questions you can ask there.
If you don't have any questions it's a good idea anyway to read a few of the latest posts to get an idea if there might be problems or things to be careful with/aware of.

eventcom said:
no, of course not all... I'd suggest to read the first post (obviously) because of the instructions. If you have questions then you could use the search box to search directly inside the thread and if that doesn't help or you have questions you can ask there.
If you don't have any questions it's a good idea anyway to read a few of the latest posts to get an idea if there might be problems or things to be careful with/aware of.
Click to expand...
Click to collapse
Thanks Pator and eventcom. I spent an hour on the first post and think I will manage it.
All but one question are answered there: I understood that If I've flashed bravo-recovery and backup then I have to flash bravo-boot after this and reboot. But what if I apply a new ROM? Is it bravo-recovery -> new rom -> gapps -> bravo-boot -> reboot or should I apply gapps after bravo-boot?
Thanks again!!!
Christian

cab00 said:
Thanks Pator and eventcom. I spent an hour on the first post and think I will manage it.
All but one question are answered there: I understood that If I've flashed bravo-recovery and backup then I have to flash bravo-boot after this and reboot. But what if I apply a new ROM? Is it bravo-recovery -> new rom -> gapps -> bravo-boot -> reboot or should I apply gapps after bravo-boot?
Thanks again!!!
Christian
Click to expand...
Click to collapse
if you already have set up custom mtd partitions you need to flash only the bravo-boot file again if you apply a new ROM. My order would be: Nandroid backup -> format system -> wipe cache -> wipe dalvik-cache -> flash new ROM -> flash gapps -> flash bravo-boot file -> reboot
One exception: some ROMs suggest wipe data also. In this case I'd do a "format data" after system wipe/format, too plus also a "complete wipe/factory reset" after wiping caches - it's a bit redundant - just to make sure everything goes right.
BTW: it would be great if you could change this threads title into something like e.g. "Is there a Jelly Bean installation guide" as it's a bit misleading for others

Related

TempestRom-StockKI4Kitchen-KI1Modem-CFRootKI4

Sorry guys rong place sorry.
Thread is dead!
shakeyabooti said:
Hi Guys and Gals....
Please follow the instructions and you shouldn't have a problem
KI4 Rom Kitchen with all apps deodexed
CF-Root KI4 Kernel
Modem is KI1
Thanks to everyone (I Really Mean Everyone)
Download these two files first and put them in your sdcard
http://dl.dropbox.com/u/33160483/ROM/TempestRom/KI4-KernCFRootKI4-ModemKI1-TempestRom.zip
http://dl.dropbox.com/u/33160483/ROM/TempestRom/TempestRom-update.zip
Boot to CWM do a wipe data, cache, delvic etc
install KI4-KernCFRootKI4-ModemKI1-TempestRom.zip
then let your phone boot up.....direct yourself to CWM and and Flash Update and direct it to : TempestRom-update.zip
give it time to boot first time,
Good luck guys and don't ask me if it works with other roms I don't know
Hope it all works but dont blame me if your phone gets ****ed up.
This is my first time...I am not a coder and the update is mainly graphical.
I am very busy farmer so dont expect too many replies, maybe you can all help each other, now thats a thought!
Click to expand...
Click to collapse
thank youu
Shouldn't this be in Android Development section? Instead of Themes and Apps? Judging from the OP it sounds and looks like a ROM.
Right or Wrong
Nitroz said:
Shouldn't this be in Android Development section? Instead of Themes and Apps? Judging from the OP it sounds and looks like a ROM.
Click to expand...
Click to collapse
You didn't read what I put did you.....Its mainly a theme but i put the stock rom with it that I use, I am not a developer and that section is for complete roms.

[Q] upgraded to FXP201 but no wifi

i have upgraded to FXP201, but my wifi doens't work, can anyone help???? it was working with FXP 151 beforeeee
demo_demo said:
i have upgraded to FXP201, but my wifi doens't work, can anyone help???? it was working with FXP 151 beforeeee
Click to expand...
Click to collapse
I have the same problem... :crying:
Did you flash the new kernel?
Also, wrong section.
Someguyfromhell said:
Did you flash the new kernel?
Also, wrong section.
Click to expand...
Click to collapse
i couldn't post in the android development board, so i thougth i should post here
no, didn't flash the new kernel...do i have to?? cos i didn't for some of the other versions~ will i lose my apps once flashed the new kernal??
thanks
You won't lose your apps if you flash a new kernel
NO wifi...
demo_demo said:
i have upgraded to FXP201, but my wifi doens't work, can anyone help???? it was working with FXP 151 beforeeee
Click to expand...
Click to collapse
Just on the wifi.. ofcourse it wont on.. just on it . and reboot it... then wifi works.. click thanks if i helped ..
demo_demo said:
no, didn't flash the new kernel...do i have to??
Click to expand...
Click to collapse
You should actually READ the instructions before flashing anything or applying any mods to your Phone, if more People did xda wouldn't be filled with pointless posts like this reporting things have absolutely nothing to do with the ROM/kernel/mod or whatever.
XperienceD said:
You should actually READ the instructions before flashing anything or applying any mods to your Phone, if more People did xda wouldn't be filled with pointless posts like this reporting things have absolutely nothing to do with the ROM/kernel/mod or whatever.
Click to expand...
Click to collapse
Trouble with that is, the original post makes no mention of a new kernel. And there's nothing on the FXP Google site, either about a new kernel for 201.
I would've thought a problem with wifi would definitely be a problem with the ROM/kernel/mod. Trouble with this site is there are far too many posts knocking people down - and with a thread that's only 7 posts long prior to this, a little patience and a point in the right direction to the kernel sources - as you appear to know everything there is to know - wouldn't have gone amiss.
TheHurf said:
Trouble with that is, the original post makes no mention of a new kernel.
Click to expand...
Click to collapse
demo_demo said:
no, didn't flash the new kernel...do i have to??
Click to expand...
Click to collapse
TheHurf said:
And there's nothing on the FXP Google site, either about a new kernel for 201.
Click to expand...
Click to collapse
What's in the instructions for flashing....
FXP said:
HOWTO
Install instructions:
1. Install a Recovery (there are some around this forum)
2. Flash Rom
3. Flash gapps
4. Wipe (only required 1st time)
5. Flash kernel (fastboot flash boot boot.img)
Click to expand...
Click to collapse
...which is pretty much a condensed version of what's posted at the CM Wiki - http://wiki.cyanogenmod.org/index.php?title=Install_CM_for_anzu
TheHurf said:
Trouble with this site is there are far too many posts knocking people down - and with a thread that's only 7 posts long prior to this, a little patience and a point in the right direction to the kernel sources - as you appear to know everything there is to know - wouldn't have gone amiss.
Click to expand...
Click to collapse
I've replied to a post in the exact same manner I would of with someone who had made 50,000 posts, should you read the instructions before flashing anything, YES as I've stated, and if you or anyone else doesn't like my opinion in response to a user who's started a thread to report an issue then gone on to state they haven't followed all the instructions, tough, you either understand my methods or you don't.
The kernel is in the zip they downloaded which they should already know as they've been running 151.
XperienceD said:
What's in the instructions for flashing....
I've replied to a post in the exact same manner I would of with someone who had made 50,000 posts, should you read the instructions before flashing anything, YES as I've stated, and if you or anyone else doesn't like my opinion in response to a user who's started a thread to report an issue then gone on to state they haven't followed all the instructions, tough, you either understand my methods or you don't.
The kernel is in the zip they downloaded which they should already know as they've been running 151.
Click to expand...
Click to collapse
thanks for your help, because i have been upgrading from 147 to 151 without flashing the boot.img in the zip file, so i would assume that i dont have to flash it, because the wifi was working all along when i upgraded to the different versions
now that i have flashed the new kernal, it works all fine now!! thanks for everyone who has helped though!
demo_demo said:
thanks for your help, because i have been upgrading from 147 to 151 without flashing the boot.img in the zip file
Click to expand...
Click to collapse
ALWAYS update the kernel, then if you do run in to issues like this you know it's something else.

[t0ltetmo][CWM Advanced Edition] PhilZ Touch

Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
Note 2 TMO (t0ltetmo)
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
Click to expand...
Click to collapse
No thanks, it was so confusing, and so small
Phil3759 said:
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Download links
Last version can be found here:
Click to expand...
Click to collapse
Thanks so much. Beats regular CWM by miles, not complaining about CWM but swapping back to it I have missed TWRP, this fills those voids.
loaferkan said:
No thanks, it was so confusing, and so small
Click to expand...
Click to collapse
+1
Sent from my SGH-T889 using xda premium
Edit: Nevermind. Dev host had problems.
Sent from my Samsung Note 2 T889 running Skynote 4.3 R9z.
Thanks for your work for our device. Your efforts are elegant and appreciated.
Hastily spouted for your befuddlement
Testing it out right now. Gonna try and flash KitKat with it
Works great. Much needed
Sent from my SGH-T889 using XDA Premium 4 mobile app
installed it rebooted and screen kept flashing black rebooted and now its slowwww...... might be because I am running an att rom? or becsuse its 4.3?..... I'm gonna try wiping dalvik I guess
I think Wiping dalvik and cache fixed it.... still a tiny lag but its hard to tell if that was there before or not
loaferkan said:
No thanks, it was so confusing, and so small
Click to expand...
Click to collapse
It is, however the nice thing about this recovery is that it is customizable. Go into "PhilZ Settings" -> "GUI Preferences" the tap on "Menu Height" until the menu suits your needs. Personally i set it at 72
GreatSudoku said:
It is, however the nice thing about this recovery is that it is customizable. Go into "PhilZ Settings" -> "GUI Preferences" the tap on "Menu Height" until the menu suits your needs. Personally i set it at 72
Click to expand...
Click to collapse
If it's not broken, don't fix it...I think my recovery the current one is fine....It's has big touch keys, and easy to understand...just a few boxes and get my things done!
loaferkan said:
If it's not broken, don't fix it...I think my recovery the current one is fine....It's has big touch keys, and easy to understand...just a few boxes and get my things done!
Click to expand...
Click to collapse
TWRP is a very good recovery, stock cwm too. My recovery was greatly inspired from twrp to whom I give credits in my sources/thread.
However, i really do not care about your personal tastes, nor do readers probably. If you have no contributing dev posts, no need to add them here. It is the developer topic
You can open a recovery discussion on your tastes in General section.
I monitor above 70 threads to give support. So, if everyone posts what ever he likes just to talk, I keep wasting my time refreshing threads just to read useless comments.
This is directed to all, not only you.
There are rules in dev section, they are there for a reason, so follow them
Other things go in faq or general section
Discussion CLOSED
BACK TO THE SUPPORT
Just a question... what does this recovery do that twrp doesn't? Why would I want to use this recovery?
sydneybelinda said:
Just a question... what does this recovery do that twrp doesn't? Why would I want to use this recovery?
Click to expand...
Click to collapse
you shouldn't use it then
Read OP
Follow links in it and read all the pages you are linked to
Ask in FAQ/General section
If you think there is something you need in this recovery, try it. Else, ignore it
sydneybelinda said:
Just a question... what does this recovery do that twrp doesn't? Why would I want to use this recovery?
Click to expand...
Click to collapse
This recovery is cwm based but with twrp elements like customizability.... I find twrp often unreliable and often instillations made by twrp are often not the same quality as cwm.... Also it fails to migrate sdcard between 4.1 and 4.2+.... This for all I know doesn't have these problems
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Phil3759 said:
TWRP is a very good recovery, stock cwm too. My recovery was greatly inspired from twrp to whom I give credits in my sources/thread.
However, i really do not care about your personal tastes, nor do readers probably. If you have no contributing dev posts, no need to add them here. It is the developer topic
You can open a recovery discussion on your tastes in General section.
I monitor above 70 threads to give support. So, if everyone posts what ever he likes just to talk, I keep wasting my time refreshing threads just to read useless comments.
This is directed to all, not only you.
There are rules in dev section, they are there for a reason, so follow them
Other things go in faq or general section
Discussion CLOSED
BACK TO THE SUPPORT
Click to expand...
Click to collapse
Sorry bro, you didn't post this in the Developer's section....probably you need to read the instructions and post it there. And I know many people carry the same opinion as I....Don't need to confused people with so many recovery, simple is always the best option.
Good Luck
loaferkan said:
Sorry bro, you didn't post this in the Developer's section....probably you need to read the instructions and post it there. And I know many people carry the same opinion as I....Don't need to confused people with so many recovery, simple is always the best option.
Good Luck
Click to expand...
Click to collapse
What? ??
By the way most users like options. If you don't then stick with cwm and stop trying to discourage further development for the note. This is a development website (xda developers) the purpose of this site is for developers to share work and users are free to try it. Now I'm happy with TWRP, but another option is great and I'll probably give this a shot soon but others didn't like the options or want to try something new now
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
loaferkan said:
Sorry bro, you didn't post this in the Developer's section...
Good Luck
Click to expand...
Click to collapse
Huh? Was this thread moved recently? Because I thought it was in the developer's section.
I have been toying with Kit Kat, so I had to leave TWRP for non-touch CWM to get it to function (a known issue). If I'm not mistaken, I've flashed both 4.4 and Touchwiz 4.3 with this recovery with no issues - and I still get to have touch. I appreciate the work, philz!
Sent from my SGH-T889 using XDA Premium 4 mobile app
Very good work... Well thought out and useful selections. It looks better too. Thanks for making this.
If possible can you make multi zip flash a bit easier by not asking to create folder under clockworkmod directory.
Sent from my SGH-T889 using Tapatalk
homerxd said:
Very good work... Well thought out and useful selections. It looks better too. Thanks for making this.
If possible can you make multi zip flash a bit easier by not asking to create folder under clockworkmod directory.
Sent from my SGH-T889 using Tapatalk
Click to expand...
Click to collapse
the idea is to have many possible sets to flash
1- ROM_CYANOGEN_X_Mods
2- ROM_CRAZY_ME_MODS
...

[Q] Help

I am using ignorance rom currently and i want to change to aokp...what should i do now?? Jst having the zip in sd card and on the bootlander wiping the data and installing the new zip will do or is there anything else to do?? Pls help
ranjithm said:
I am using ignorance rom currently and i want to change to aokp...what should i do now?? Jst having the zip in sd card and on the bootlander wiping the data and installing the new zip will do or is there anything else to do?? Pls help
Click to expand...
Click to collapse
flash proper kernel (no, I won't provide any links, you have to find it by yourself by using "search" tool... aokp is CM9 [ICS] or CM10 [JB]) and then flash aokp ROM
ranjithm said:
I am using ignorance rom currently and i want to change to aokp...what should i do now?? Jst having the zip in sd card and on the bootlander wiping the data and installing the new zip will do or is there anything else to do?? Pls help
Click to expand...
Click to collapse
Oh and its bootloader .. click the kernel tab on one v home page for kernels
Help
parkourz said:
flash proper kernel (no, I won't provide any links, you have to find it by yourself by using "search" tool... aokp is CM9 [ICS] or CM10 [JB]) and then flash aokp ROM
Click to expand...
Click to collapse
I dont get you...wat does proper kernel mean, isn't stock kernel enough???
ranjithm said:
I dont get you...wat does proper kernel mean, isn't stock kernel enough???
Click to expand...
Click to collapse
The best way to learn something is to read ROM's first posts
First posts of many roms don't give much information actually... You'll probably have to read many ''first posts'' to get a proper understanding. People on here are annoying about telling new people how to get started because they in all likelihood learned by themselves though searching and reading. Flashing a new rom is easy but there is a learning curve and you will need troubleshooting skills, so the more you read and know the better!
leekohlbradley said:
First posts of many roms don't give much information actually... You'll probably have to read many ''first posts'' to get a proper understanding. People on here are annoying about telling new people how to get started because they in all likelihood learned by themselves though searching and reading. Flashing a new rom is easy but there is a learning curve and you will need troubleshooting skills, so the more you read and know the better!
Click to expand...
Click to collapse
We are all learning by making mistakes You think why I know more than e.g. OP of this thread? Because I'm too impatient to wait until somebody will answer my questions! I was doing things by myself, bricking phones, restoring them back and gaining knowlegde! So not more experienced users are "bad" because they won't tell everything, NEW USERS ARE TO LAZY TO SEARCH, MAKING MISTAKES AND LEARN!!!
ranjithm said:
I dont get you...wat does proper kernel mean, isn't stock kernel enough???
Click to expand...
Click to collapse
Don't worry!
Anyone coming to XDA forums for the first time, is "noob" and all the other names...
What IS important - you have "sticky" threads that will explain quite a lot. BUT, you'll have to read and read and read until you'll know what and where to ask... Well, we all learn until we die... :angel:
So, yes, read. Search and search and read again! Or, if you're in real trouble, send PM (you know what that is, right?)...
Regarding your question, well, you'll just have to look around and decide what you'll do with your hov :fingers-crossed:
But, to be on "friendly side",
read that: http://forum.xda-developers.com/showthread.php?t=1598964 and that: http://forum.xda-developers.com/showthread.php?t=1713257 and http://forum.xda-developers.com/showthread.php?t=1869667 and http://forum.xda-developers.com/showthread.php?t=1806152 and http://forum.xda-developers.com/showthread.php?t=1996665. I KNOW - a lot to read, but...
Oh, don't just pick a rom like pants or shirt, go through all of them, read and read all OPs until you're sure which one to put on your hov. And before you do that for the first time, learn how to do that again and again...
bratusm said:
Don't worry!
Anyone coming to XDA forums for the first time, is "noob" and all the other names...
What IS important - you have "sticky" threads that will explain quite a lot. BUT, you'll have to read and read and read until you'll know what and where to ask... Well, we all learn until we die... :angel:
So, yes, read. Search and search and read again! Or, if you're in real trouble, send PM (you know what that is, right?)...
Regarding your question, well, you'll just have to look around and decide what you'll do with your hov :fingers-crossed:
But, to be on "friendly side",
read that: http://forum.xda-developers.com/showthread.php?t=1598964 and that: http://forum.xda-developers.com/showthread.php?t=1713257 and http://forum.xda-developers.com/showthread.php?t=1869667 and http://forum.xda-developers.com/showthread.php?t=1806152 and http://forum.xda-developers.com/showthread.php?t=1996665. I KNOW - a lot to read, but...
Oh, don't just pick a rom like pants or shirt, go through all of them, read and read all OPs until you're sure which one to put on your hov. And before you do that for the first time, learn how to do that again and again...
Click to expand...
Click to collapse
I know how to root or how to make nandroid backup...my question is just that do I need to flash the kernel, I have stock kernel and I read a post that stock kernel is sufficient for all roms but not sure if its true...need an expert suggestion for that like from u people!!!
ranjithm said:
I know how to root or how to make nandroid backup...my question is just that do I need to flash the kernel, I have stock kernel and I read a post that stock kernel is sufficient for all roms but not sure if its true...need an expert suggestion for that like from u people!!!
Click to expand...
Click to collapse
To make it short: every rom needs a kernel that it's likely not stock kernel. In every OP of rom it's written which kernel you have to use...

[Q] Cyanogenmod 11 rom install

Hello everyone i want to install this rom http://forum.xda-developers.com/showthread.php?t=2735775 on my wildfire s but i am facing a problem. I have downloaded the newest zip file of the rom and when i try to flash it using cwm it writes :installation aborded. Zip file status (0).
What wrong i do guyes or is there any step that i had to do and haven't done it? Some accurate help (because i am pretty new at rooting etc) would be much apreceated!! Thank you for you time.
Giannis20 said:
Hello everyone i want to install this rom http://forum.xda-developers.com/showthread.php?t=2735775 on my wildfire s but i am facing a problem. I have downloaded the newest zip file of the rom and when i try to flash it using cwm it writes :installation aborded. Zip file status (0).
What wrong i do guyes or is there any step that i had to do and haven't done it? Some accurate help (because i am pretty new at rooting etc) would be much apreceated!! Thank you for you time.
Click to expand...
Click to collapse
This issue already described on that thread, just read the last few post/comment on that thread or this one.
thank you
testmasterbd said:
This issue already described on that thread, just read the last few post/comment on that thread or this one.
Click to expand...
Click to collapse
Thanks man! Two more questions, how i flash the recovery? Probably stupid question but i don't know the way..
After flashing the recovery i can just flash the zip rom or is there enything else it needed to be done ??
Giannis20 said:
Thanks man! Two more questions, how i flash the recovery? Probably stupid question but i don't know the way..
After flashing the recovery i can just flash the zip rom or is there enything else it needed to be done ??
Click to expand...
Click to collapse
There is too many way to flash custom recovery. For that you can use my signature (there is a link for CWM).
And if you need to know about custom recovery then read these Tutorial - 1, Tutorial - 2, Tutorial - 3 or use search option on XDA.
fine
testmasterbd said:
There is too many way to flash custom recovery. For that you can use my signature (there is a link for CWM).
And if you need to know about custom recovery then read these Tutorial - 1, Tutorial - 2, Tutorial - 3 or use search option on XDA.
Click to expand...
Click to collapse
Done it! Have upgraded and installed the rom!! All work fine! Just a little problem.. There is no Play Store.. Any suggestions ??
Oh! I almost forgot! And when newer editions or this rom are released how do i update?
Giannis20 said:
Done it! Have upgraded and installed the rom!! All work fine! Just a little problem.. There is no Play Store.. Any suggestions ??
Oh! I almost forgot! And when newer editions or this rom are released how do i update?
Click to expand...
Click to collapse
Just read the OP, you'll find everything You can update that ROM via OTA or fresh flash.
testmasterbd said:
Just read the OP, you'll find everything You can update that ROM via OTA or fresh flash.
Click to expand...
Click to collapse
Another silly question here.... What exactly is op???
I am new to all this and i don't know the terminology..
http://forum.xda-developers.com/showthread.php?t=1699838
testmasterbd said:
http://forum.xda-developers.com/showthread.php?t=1699838
Click to expand...
Click to collapse
ha!! i think i found what u mean.... this http://forum.xda-developers.com/showthread.php?t=2756379 ???
Yeap...
testmasterbd said:
Yeap...
Click to expand...
Click to collapse
But how am i supposed to install the gapps??? They say it in a hard to understand language (developer language)!!
Any easier directions??? Sorry to bother you but...
Giannis20 said:
But how am i supposed to install the gapps??? They say it in a hard to understand language (developer language)!!
Any easier directions??? Sorry to bother you but...
Click to expand...
Click to collapse
Just flash the gapps via CWM (same as ROM flashing)
All instruction are available on that thread. If you have any question regarding CM11 on WFS then you need to read thoroughly that thread.
testmasterbd said:
Just flash the gapps via CWM (same as ROM flashing)
All instruction are available on that thread. If you have any question regarding CM11 on WFS then you need to read thoroughly that thread.
Click to expand...
Click to collapse
Okay. Thanks!
testmasterbd said:
Just flash the gapps via CWM (same as ROM flashing)
All instruction are available on that thread. If you have any question regarding CM11 on WFS then you need to read thoroughly that thread.
Click to expand...
Click to collapse
oh! something that i just noticed.. what is cronmod ??
Giannis20 said:
oh! something that i just noticed.. what is cronmod ??
Click to expand...
Click to collapse
use my signature
testmasterbd said:
use my signature
Click to expand...
Click to collapse
I 've read some threads. Thing i got it! Pretty simple as i think.. I need to do that partition before i flash the cm11,before the gapps?
Giannis20 said:
I 've read some threads. Thing i got it! Pretty simple as i think.. I need to do that partition before i flash the cm11,before the gapps?
Click to expand...
Click to collapse
Yeap...
If you need any instruction then you can follow this GUIDE.

Categories

Resources