Why I use OTG after you connect the USB flash drive, USB disk could not be found in the phone directory?
USB Host (or USB OTG, On The GO) is a documented feature in the manual but it does not appear to work. Someone figured out how to eneable it if you are rooted but I can't find the thread.
USB Host is working with stock 4.0.2. However, this is only for things such as mice and keyboards. If you want to access USB storage, root your device and install Stickmount from the market.
I can confirm that my GN GSM with the stock 4.0.1 rom doesn't recognize my keyboard and mouse using an OTG USB cable. A bluetooth keyboard does work however.
you need a true OTG cable, root and stickroot from the market. Also sometimes a custom rom, but usually not.
This is my setup and i've tested a usb microsd reader, 4 and 8gb flash drives, 2 mice and a usb keyboard.
Like I said, USB host was enabled by Google in 4.0.2. If you have an earlier firmware version, it won't work without a custom kernel.
Google did not however provide the ability to access USB mass storage. To do this you'll have to root your Nexus and install Stickmount.
Hey I currently havea Western Digital 500gig external hard drive formatted as HFS and I tried plugging it in to my USB cable and nothing appeared. Does anyone know of a way to get the GS3 to recognize HFS-formatted drives over USB OTG?
kthung said:
Hey I currently havea Western Digital 500gig external hard drive formatted as HFS and I tried plugging it in to my USB cable and nothing appeared. Does anyone know of a way to get the GS3 to recognize HFS-formatted drives over USB OTG?
Click to expand...
Click to collapse
You would need a custom kernel that has built-in support for the filesystem. Same thing goes for NTFS.
I have a stock jellybean 4.1.1 how I Am able to run USB ON the go on my HTC One X ??? any suggestions. is it ok to install custom kernels on a stock rom to run usb OTG ??
It works on stock kernel.
Sent from my IceCold One X
just connet usb otg cable and it works (most usb otg cables from ebay works great)
if it doesnt work, check file system on your usb disk (for me works only fat32 on stock)
Mato_K said:
just connet usb otg cable and it works (most usb otg cables from ebay works great)
if it doesnt work, check file system on your usb disk (for me works only fat32 on stock)
Click to expand...
Click to collapse
I got 16 gb kingston Usb when ever I plugged that it hanged and restart my phone otherwise mouse and card readers memory cards working upto 32gb
did you try format it?
Mato_K said:
did you try format it?
Click to expand...
Click to collapse
yes i tried every format on usb and is perfectly working on pc !!
how can i use that 16gb usb on USB OTG ?? whats the reason for working
Hook it up and check in settings - storage. Scroll all the way down, there should be info about usb on the go
annus9214 said:
I have a stock jellybean 4.1.1 how I Am able to run USB ON the go on my HTC One X ??? any suggestions. is it ok to install custom kernels on a stock rom to run usb OTG ??
Click to expand...
Click to collapse
1-trying istalling Lidroid File Managar
2-connect OTG cable and mass storage
3-enjoy
elmanortega said:
1-trying istalling Lidroid File Managar
2-connect OTG cable and mass storage
3-enjoy
Click to expand...
Click to collapse
mouse and micro sd card via card reader is working except my 16gb usb and i tried with every format but still the same result phone restarts !! any reason or seggestion please ??
you said that is working...so i think that can be the 16gb sdcard that can be corrupted or damaged i think so...also try installing original software
I have a strange request, it has happened that after removing a usb drive, the phone no longer recognizes photos and music stored to sdcard?
With es file manager I see the files, but there isn't in galley or music
Anyone can help me??
Sent from my HTC One X+ using Tapatalk 4 Beta
Follow up on USB Host
I too am using an HTC One X running 4.1.1
I've got an OTG cable and have tried connecting a thumb drive and card reader. Both work. The drives are visible and accessible on the phone. That's USB storage which isn't the same as USB Host, but it shows that the port is active.
I can plug in the dongle for a wifi mouse, it too is recognised and I'm able to use the mouse to navigate around on the phone. This, as far as I understand, is actually USB Host in action.
The problem arises when I try to connect a DSLR and use a camera controller app like Helicon Remote or DSLR Dashboard. The app doesn't recognise that the camera is connected.
What's the difference between the wifi mouse and the camera?
Thoughts appreciated. Thanks.
In fact, there is a problem that any USB storage device on the phone creates the following folder structure:
/ storage / usb / Android / data / com.htc.album / .thumbnails /
Then create multiple copies, can be found in the internal memory, same-path, including folders that contain thumbnails, but empty.
So because of these being used constantly sticks, so when the capture traces of the settings, then any writes to the phone to choose from, but it can not happen, but the capture button will be disabled, but only while again not I step into the menu.
The above mentioned directories erased because the phone reboot always create them again.
If the phone was not rebooted since I've used it and the flash drive has been physically removed it, then if I connect again, it appears no file until you restart the phone.
ya i have the same problem...im using 4.2.2 custom ....and when i use my otg cable n plug my usb it works the 1st time then if i disconnect the connect it back or use another usb it wont work unless i restart my phone....not sure why its not working....but it works for samsung note 3 i tested on my friends phone...
and when i try to unmount the usb it just says unmounting in progress
sudhanmalla said:
ya i have the same problem...im using 4.2.2 custom ....and when i use my otg cable n plug my usb it works the 1st time then if i disconnect the connect it back or use another usb it wont work unless i restart my phone....not sure why its not working....but it works for samsung note 3 i tested on my friends phone...
and when i try to unmount the usb it just says unmounting in progress
Click to expand...
Click to collapse
Exactly the same.
I have the same problem. I wrote message to HTC so I'm waiting for respond
sudhanmalla said:
ya i have the same problem...im using 4.2.2 custom ....and when i use my otg cable n plug my usb it works the 1st time then if i disconnect the connect it back or use another usb it wont work unless i restart my phone....not sure why its not working....but it works for samsung note 3 i tested on my friends phone...
and when i try to unmount the usb it just says unmounting in progress
Click to expand...
Click to collapse
Got any solution for this??
When I connect a USB device to my rooted N7 via OTG cable, QuickMount/StickMount say "successfully mounted" but the device doesn't show up in my explorer (ES File Manager). I tried two different sticks (both formatted in FAT32). One stick has a light which turns on when connecting to the N7. A mouse/keyboard is also working, so I would say the cable is working.
What can I do?
if you are rooted, try Stick Mount. It is the only way I can mint b sticks on my nexus 7.
I don't know about quickmount, but stickmount is mount under folder name USB OTG not on separate drive.
I plugged in an OTG cable and USB stick. The tab said USB storage was found but in fact it did not see the USB stick nor what was on it. So, no OTG support for the stock ROM?
OTG works!
Seemingly your stick uses unsupported format.
Thanks