Hey guys I've tried asking in the threads for these fixes but to no avail so hopefully someone will be able to help me if I make a thread for it. So my issue is that I've been using Google Wallet just fine with no issues using the "build prop edit, reboot recovery and move wallet apk into system/apps" method and it worked until a couple of CM10 updates awhile ago after which it stopped working, I've tried to go back to stock and use the touchwiz fix which also didn't work and currently I'm on the latest AOKP on which I still can't get it to work.
What seems to be happening is that the wallet app is not actually installing in the system, so after I copy the apk and restart, there is still no wallet app or anything in my drawer or if I try the zip file flash method after the restart I'll get a force close for wallet and then the app is gone as well. Not sure why it's happening or what to do, any help is appreciated and hopefully we can get me back on wallet asap, I'm glad I already used the prepaid card up lol.
I'm not sure if you posted in the correct section but here's your problem you need your permissions to be correct. make them match this
Sent from my Galaxy Nexus using xda premium
Which rom are you on and which wallet are you flashing?
Sent from my Galaxy Nexus using xda premium
bugity said:
I'm not sure if you posted in the correct section but here's your problem you need your permissions to be correct. make them match this
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Actually now that you mention it I realize it's in the wrong forum as well my bad, and I've tried that as well actually I just neglected to say it. Maybe you can advise me of everything you did and I can try it again I've got my nandroid already ready lol. And did you flash the zips or do the copy of the apk? Thanks again for the quick response.
bugity said:
Which rom are you on and which wallet are you flashing?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I'm currently on the latest AOKP, I've tried it on codefirex, CM10 and the jellybean official leak(for the leak I tried the touchwiz fix method) and I've tried r75 and r79 neither are working but the copying the r75 apk into system/app method is what worked before. On the touchwiz fix method I actually was able to get wallet open but then it would say NFC would have to be enabled at which point the whole NFC/S-beam options would mysteriously disappear from the settings screens. There would also be a random vibration for no reason every few seconds.
Here's what I do
First I flash my rom then
I reboot. And with root explorer I put the wallet apk into the /system/app folder
I then change the permissions to the correct type. Then I access my build. Prop and make the three necessary changes. After that I reboot and I am able to use wallet with no problems. Btw I am using aokp and ill post the wallet apk I use in one sec. Are you on a Sammy rom because if you are you will most likely have to flash the new lib files as well
Sent from my Galaxy Nexus using xda premium
Shels said:
I'm currently on the latest AOKP, I've tried it on codefirex, CM10 and the jellybean official leak(for the leak I tried the touchwiz fix method) and I've tried r75 and r79 neither are working but the copying the r75 apk into system/app method is what worked before. On the touchwiz fix method I actually was able to get wallet open but then it would say NFC would have to be enabled at which point the whole NFC/S-beam options would mysteriously disappear from the settings screens. There would also be a random vibration for no reason every few seconds.
Click to expand...
Click to collapse
If you are on aokp DO NOT flash the libs files. I here's the wallet I use http://db.tt/F6b4VTun
And here try this too its a modified build . Prop to be used for aokp ONLY it goes in /system/ (do not forget to do the permissions properly on both before reboot) http://db.tt/3JaUsEMv
Sent from my Galaxy Nexus using xda premium
IV had so much trouble with wallet in the past but iv recently figured out how to get it working every time and I'm sure you can too
Sent from my Galaxy Nexus using xda premium
Also NEVER Forget To RESET WALLET BEFORE a New ROM Flash or you WILL BREAK Your SECURE element and once you get wallet working make a backup of the rom so if you do one day forget you can restore the backup, reset wallet and hopefully fix the issue
Sent from my Galaxy Nexus using xda premium
bugity said:
Here's what I do
First I flash my rom then
I reboot. And with root explorer I put the wallet apk into the /system/app folder
I then change the permissions to the correct type. Then I access my build. Prop and make the three necessary changes. After that I reboot and I am able to use wallet with no problems. Btw I am using aokp and ill post the wallet apk I use in one sec. Are you on a Sammy rom because if you are you will most likely have to flash the new lib files as well
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Ok thanks for all the help I really appreciate it, I followed your instructions and am using the files you provided. I'll update in a sec, and no I tried a Sammy rom previously but as it didn't work I'm on AOKP now.
bugity said:
If you are on aokp DO NOT flash the libs files. I here's the wallet I use http://db.tt/F6b4VTun
And here try this too its a modified build . Prop to be used for aokp ONLY it goes in /system/ (do not forget to do the permissions properly on both before reboot) http://db.tt/3JaUsEMv
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Ok so I used the files provided but now the phone won't boot up at all, it goes as far as the Samsung Galaxy S3 logo and then stops and stays black no bootanimation or anything, I'm gonna restore my nandroid and just see what happens if I use the apk alone and just manually change the build prop values for product device, model and name. Would you recommend the Galaxy Nexus values or the htc jewel? I use to use the Galaxy and it worked fine. I was also using root toolbox pro to edit the build prop which use to work as well,
bugity said:
Also NEVER Forget To RESET WALLET BEFORE a New ROM Flash or you WILL BREAK Your SECURE element and once you get wallet working make a backup of the rom so if you do one day forget you can restore the backup, reset wallet and hopefully fix the issue
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I was confused about the reset wallet thing, I use to go on the wallet website and disable the app from there, not sure if that was right or not. I have not received any of the broken element msgs, there's just no wallet period lol.
Update, it didn't work. I did the move, edited the build prop but Wallet just won't appear despite being in the system/app folder rw-r-r
Sent from my SGH-I747 using xda premium
Related
I used the ATT google wallet method and followed/flashed appropriate files, but I still keep getting add card failed sign. I tried wiping dalvic and cache as posted on OP, but it doesn't do the trick. Is there a fix to this? Would full wiping and reflashing rom do the trick?I'm currently using Ariel rom. Thanks in advance
amgpower63 said:
I used the ATT google wallet method and followed/flashed appropriate files, but I still keep getting add card failed sign. I tried wiping dalvic and cache as posted on OP, but it doesn't do the trick. Is there a fix to this? Would full wiping and reflashing rom do the trick?I'm currently using Ariel rom. Thanks in advance
Click to expand...
Click to collapse
I have the same issue. Any help would be appreciated,
Sent from my SAMSUNG-SGH-I747 using xda premium
Bump
Sent from my Galaxy Nexus using Tapatalk 2
Same here..
Sent from my SAMSUNG-SGH-I747 using xda premium
I guess a lot of people are experiencing the problem. Would there be something wrong with the Google server?
Sent from my Galaxy Nexus using Tapatalk 2
bump
Did you edit build.prop before trying to add the card?
Double check the instructions here: http://forum.xda-developers.com/showthread.php?t=1769083
Sent from my SGH-I747 using xda app-developers app
Had this problem on my Galaxy Nexus after an update. Nothing I did was able to fix it (reset wallet, reinstall, install modded apk, nandroid to working backup, change build.prop, change android ID, etc). I called up Google Wallet support 5 weeks ago and they haven't helped at all.
The only solution was to get a new phone. Probably not what you want to hear, but that's what I did. I still have the old phone and check it periodically, but I always get the "Add card failed" error on it.
Greycloak42 said:
Did you edit build.prop before trying to add the card?
Double check the instructions here: http://forum.xda-developers.com/showthread.php?t=1769083
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Gregcloak42 is correct, you have to add the credit cards before putting the build.prop to back to the original settings. In my situation I had to change my settings from Galaxy Nexus to htc_jewels because I tried to add the cards after the build.prop to the original settings. Switching to the different name allowed me to add my cards.
The OP in the Google wallet thread SPECIFICALLY says you have to add the cards via desktop first. A workaround for this is to use the card you want to add on the play store. Then follow the directions again, and it should work.
Sent from my SGH-I747 using xda app-developers app
Same issue here! My build.prop is correct, I've added the cards on desktop with browser etc.
Any other idea?
dy/dx said:
Same issue here! My build.prop is correct, I've added the cards on desktop with browser etc.
Any other idea?
Click to expand...
Click to collapse
I had issues with mine, so when task released the 1/4 build, I wiped the system partition and started over. Fixed it right up.
Sent from my SGH-I747 using xda app-developers app
I had this issue after I upgraded SynergyROM on my GS3 and forgot to wipe gwallet before flashing.
Wiping system, data, and all the other folders prior to factory reset and re-flash of the new ROM fixed it. Thanks!
The latest version of Wallet may not like your phone. I would try installing the last version to see if that will work for you. Also, obviously ensure that you don't revert your build.prop back to stock until you successfully add the cards. I can confirm latest version works flawlessly on Task's AOKP ROM.
For those that don't want to fully update to 4.2 but want some of the benefits... check out this thread:
http://forum.xda-developers.com/showthread.php?t=1991734&page=20
Note-- I didn't flash this zip, I extracted the contents and installed the ones that I wanted
The only thing that isn't working correctly for me is the photosphere
If I were to extract the updates that I want, would that be done on the tablet or do I hook up to my PC? I'm not sure how to do this. Do i just flash them once they are extracted or are they apk files and i just load them? Can you point me in the right direction please? Thank you.
Sent from my Nexus 7 using XDA Premium HD app
Warrior1975 said:
If I were to extract the updates that I want, would that be done on the tablet or do I hook up to my PC? I'm not sure how to do this. Do i just flash them once they are extracted or are they apk files and i just load them? Can you point me in the right direction please? Thank you.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
Actually I'm finding it is just easier to flash the zip. It works fine provided you have busybox installed. If there are apps you don't want to install, just delete the apk from the zip (yes they are apk files)
the reason I suggest this is because some of the apks have lib (.so) files associated with them (the gallery, for example, dosent work correctly without its libs)
Extra note the updater script in the zip will remove gallery, stock keyboard and deskclock.apk
I flashed the zip and now every time I try and go into settings of the clock or set a timer, I get a FC.
Sent from my Galaxy Nexus using Tapatalk 2
mldiroff said:
I flashed the zip and now every time I try and go into settings of the clock or set a timer, I get a FC.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Which one did you install? Works perfectly for me
I used the one with the 'photosphere fix' (which still errors. Says something about no rear camera)
mldiroff said:
I flashed the zip and now every time I try and go into settings of the clock or set a timer, I get a FC.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
try clearing cache through settings for the deskclock
Sent from my Nexus 7 using Tapatalk 2
I just flashed the initial file, and then setup Google wallet. Then I rebooted into recovery and flash the second file that appears to put your build prop file back to the original Samsung settings.
I tried the other methods mentioned but they didn't work for me.
Here is the link to skynote rom thread and it contains the two files in the first post or so. http://forum.xda-developers.com/showthread.php?t=2093870 You can see who to thank for this at this thread.e
I don't take credit for any of this other than taking a chance and flashing these files from the Skynote Rom thread and trying on my Note 2 that has Cleanrom 4.0.5.
The cards I added to Wallet were my visa credit card, debit card and American Express.
Today I made two vending machine purchases using wallet with pictures attached. FYI I live in the Seattle Washington area and have not tried this wallet anywhere else.
Thanks i'm going to try this on jedi rom and see if it works.
*Update*
It installed without issue for me and setup without any FC or anything else. I'll test it out tomorrow at cvs to make sure it works but so far so good. I'm on the latest Jedi rom.
futuregerald said:
Thanks i'm going to try this on jedi rom and see if it works.
*Update*
It installed without issue for me and setup without any FC or anything else. I'll test it out tomorrow at cvs to make sure it works but so far so good. I'm on the latest Jedi rom.
Click to expand...
Click to collapse
Got it working on Jedi XpX , however, when i revert to my jedi build.prop, the wallet app dissapear.
i'd like to get it workingwith an official jedi build.prop so i'll keep trying some stuff, i'll keep you updated
Doesnt work for me on Jedi XPX. Hangs at the "Setting up Wallet for purchases" part of the install.
THANKS ALOT!!! worked on BLACKOUT RC3 like a charm.....just installed first zip and setup google wallet and then flashed second zip and walla...google wallet and spen works...AWESOME!!!:good::good:
rockinandroid said:
THANKS ALOT!!! worked on BLACKOUT RC3 like a charm.....just installed first zip and setup google wallet and then flashed second zip and walla...google wallet and spen works...AWESOME!!!:good::good:
Click to expand...
Click to collapse
I taught RC3 had the wallet stuff built right in there. No need to flash anything. Just change the build prop after setting up wallet. All these zips do is change the build props from NEXUS back to I317.
Just my 2¢
Sent from my SAMSUNG-SGH-I317 using Xparent SkyBlue Tapatalk 2
I can confirm that it works with the jedi rom. Just made my purchase today at whole foods and the receipt popped right up., really happy with this!!!
Sent from my SAMSUNG-SGH-I317 using xda premium
darksora145 said:
I can confirm that it works with the jedi rom. Just made my purchase today at whole foods and the receipt popped right up., really happy with this!!!
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
but you keep using the skynote build.prop?
then all adjustments and tweaks to build.prop by ptrm are gone you have the skynote one
i'm currently trying to find what don't work in jedi's build.prop that make the wallet dissapear when i revert it.. i'll post if ever i find anything that works.
Thanks for this, it worked on my STOCK rooted i317. Just flashed the first one, rebooted and set up Wallet, and flashed the second one. Haven't gotten to test it yet but I can't imagine having a problem with it since it let me set everything up and I was able to load back into the app after the 2nd flash. Awesome, thanks for the info OP.
No I flashed the revert to go back to note 2 and all my functionality is still good so I'm back to note 2 build prop
Sent from my SAMSUNG-SGH-I317 using xda premium
Works great on CleanRom 4.5.
Sent from my SAMSUNG-SGH-I317 using xda premium
Pple who have done this on jedi, do you use your old jedi build.prop after?
Sent from my SAMSUNG-SGH-I317M using xda app-developers app
If you downloaded the two zip files from sky notes page for Google wallet it tells you that you have to get rid of the old Google wallet stuff so it doesn't get wonky when you set up the new ones. And yes you do have to use the old build prop afterwards. That's what the finalized zip is for after you flash the step 1 zip
Sent from my SAMSUNG-SGH-I317 using xda premium
I tried this setup on my ATT note 2 and can not get past "setting up wallet for purchases". I am running Clean Rom and have followed the steps exactly. I have also tried clearing the cache and data on the wallet apk and the nfc services. Any thoughts on what to try next?
Ok, tried another method and now I am stuck at adding card though it does show as a new device added and it shows me the card that is on file.
nigelquest said:
I tried this setup on my ATT note 2 and can not get past "setting up wallet for purchases". I am running Clean Rom and have followed the steps exactly. I have also tried clearing the cache and data on the wallet apk and the nfc services. Any thoughts on what to try next?
Click to expand...
Click to collapse
nigelquest said:
I tried this setup on my ATT note 2 and can not get past "setting up wallet for purchases". I am running Clean Rom and have followed the steps exactly. I have also tried clearing the cache and data on the wallet apk and the nfc services. Any thoughts on what to try next?
Click to expand...
Click to collapse
what do you mean by cant get past? Do you mean it takes more than a few minutes and then you give up and reboot? I would make sure you uninstall any google wallet apk you have on the phone and any other traces of it. Maybe then reboot and try the two files again?
It eventually fails to add the card after a few hours. As for the first failure I gave it many, many hours. Ill give your suggestion a try though. Thanks!
livingaboard said:
what do you mean by cant get past? Do you mean it takes more than a few minutes and then you give up and reboot? I would make sure you uninstall any google wallet apk you have on the phone and any other traces of it. Maybe then reboot and try the two files again?
Click to expand...
Click to collapse
I get to this screen, get an email from Google saying I activated a new wallet and then it sits here indefinitely.
As I understand this doesn't work up here in Canada right? Are any of you guys Canadians? Love to have this.
Sent from my SGH-I317M using xda app-developers app
Now after about an hour I get this. Tried on lte and wifi.
I've decided to make a solution for primoc users who are on the Cricket network and want to have working Mms on a custom ROM due to requests.
EXPERIMENT:
Nestoh has included my patch and added his own Virgin Mobile carrier text mod to it in a flashable zip. Try it and report if it works for you please!!! (Recommended to try on RhythmicRom!)
DOWNLOAD
Okay so this is quite simple.
Step 1: Download this and copy to your SD Card.
Step 2: Flash the VMtoCricket.zip in recovery
Step 3: Wipe Cache & Davlik then reboot into your ROM
Okay, now the easy part is done. Now we will change your APN settings to get your phone up and running on Cricket.
Now Follow These Steps:
-Open voice dialer
-Say Open Apn's
-Open Spint APN
-Hit Menu then Delete Sprint APN
-Hit menu then New APN
-Input the APN settings for cricket
APN Settings:
Code:
Carrier=Cricket
Apn=Cricket
Proxy=wap.mycricket.com
Port=8080
[email protected]
Password=cricket
MMSC=http://mms.mycricket.com/mycricket/mms.php
Hopefully this works for you! Fяy has verified for me it has worked.
This works fully now i finally have working mms on my rom
Just installed this, but I haven't tried to send any mms. Just wanted to add this onto it. Since it still says the carrier name is Virgin Mobile, here's a quick fix for that.
1. Download this http://www.mediafire.com/?lul47jcyj52t49c
2. Copy and paste it into your /system/framework
3. Set the permissions to -rw-r--r--
4. Reboot
Note- Make a backup before installing just in case. Because I know some people will forget to set the permissions or will set them wrong. Also, try pushing it through ADB, it's much easier.
Edit: By the way, this is for the Rhytmic Rom
ok... I just installed Rhythmic on my wife's phone... flawless! and flashed the cricket mms fix... working!! I just wanted to drop by an tell you THANKS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
nestoh said:
Just installed this, but I haven't tried to send any mms. Just wanted to add this onto it. Since it still says the carrier name is Virgin Mobile, here's a quick fix for that.
1. Download this http://www.mediafire.com/?lul47jcyj52t49c
2. Copy and paste it into your /system/framework
3. Set the permissions to -rw-r--r--
4. Reboot
Note- Make a backup before installing just in case. Because I know some people will forget to set the permissions or will set them wrong. Also, try pushing it through ADB, it's much easier.
Edit: By the way, this is for the Rhytmic Rom
Click to expand...
Click to collapse
What file manager are you using to do this? i tried with solid and i overwrite the old app but before i set permissions the screen blacks out and i gotta reflash the rom. im using rythmic btw
CreepyE said:
What file manager are you using to do this? i tried with solid and i overwrite the old app but before i set permissions the screen blacks out and i gotta reflash the rom. im using rythmic btw
Click to expand...
Click to collapse
Use the file manager this ROM comes with or use root explorer.
Sent from my One V using Tapatalk 2
nestoh said:
Use the file manager this ROM comes with or use root explorer.
Sent from my One V using Tapatalk 2
Click to expand...
Click to collapse
And your overwriting the stock systemui apk right, THEN setting permissions, or setting permissions first?
Sent from my Nexus 7 using XDA Premium HD app
CreepyE said:
And your overwriting the stock systemui apk right, THEN setting permissions, or setting permissions first?
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
No? Its the framework-res.apk its in your /system/framework folder. Do this step by step. Make a backup first tho.
1. The apk you downloaded (which is the framework-res.apk) rename it to 1framework-res.apk
2. Copy and paste it to the folder /system/framework
3. Set the permissions to -rw-r--r--
4. Delete the other framework-res.apk
5. Rename the '1framework-res.apk' to just 'framework-res.apk'
6. Reboot your phone.
Sent from my One V using Tapatalk 2
nestoh said:
No? Its the framework-res.apk its in your /system/framework folder. Do this step by step. Make a backup first tho.
1. The apk you downloaded (which is the framework-res.apk) rename it to 1framework-res.apk
2. Copy and paste it to the folder /system/framework
3. Set the permissions to -rw-r--r--
4. Delete the other framework-res.apk
5. Rename the '1framework-res.apk' to just 'framework-res.apk'
6. Reboot your phone.
Sent from my One V using Tapatalk 2
Click to expand...
Click to collapse
Nope. The minute I delete the original framework apk everything starts force closing. I never get the opportunity to rename the other one. Tried with both file managers
Sent from my Nexus 7 using XDA Premium HD app
CreepyE said:
Nope. The minute I delete the original framework apk everything starts force closing. I never get the opportunity to rename the other one. Tried with both file managers
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
Yeah things are going to force close, just close those messages and you'll get a chance to rename it. I honestly can't make my steps any simpler.
Sent from my One V using Tapatalk 2
nestoh said:
Yeah things are going to force close, just close those messages and you'll get a chance to rename it. I honestly can't make my steps any simpler.
Sent from my One V using Tapatalk 2
Click to expand...
Click to collapse
Thx but it ain't working for me. All the file managers I've got force close. Again, thx anyway
Sent from my Nexus 7 using XDA Premium HD app
CreepyE said:
Thx but it ain't working for me. All the file managers I've got force close. Again, thx anyway
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
I'll try to make a zip file later on to make it easier, so you'll just flash it but at the moment I can't right now.
nestoh said:
I'll try to make a zip file later on to make it easier, so you'll just flash it but at the moment I can't right now.
Click to expand...
Click to collapse
Thx again
Sent from my Nexus 7 using XDA Premium HD app
sooooo, I know this guide is for 4.2.2 roms, but I tried it on a 4.2.1 rom and su and google play stop. I had a feeling this might happen, but I stll tried. I was using the new slim bean primoc. Any ideas why?
jaredl45600 said:
sooooo, I know this guide is for 4.2.2 roms, but I tried it on a 4.2.1 rom and su and google play stop. I had a feeling this might happen, but I stll tried. I was using the new slim bean primoc. Any ideas why?
Click to expand...
Click to collapse
Because of the build.prop?
Sent from my One V using Tapatalk 2
I'll check it out
Sent from my PG86100 using xda premium
Awidawad, I couldn't reply to your message, I don't know why? But here, I made the zip file, also I added the rest of the buil.prop and mms.apk from your thread. I haven't tested it tho lol But I'm pretty sure it does work. Here's a link to it.... http://www.mediafire.com/download/er954171limo717/CricketMmsPatch.zip
If anyone tries it, make back a up and please give feedback
I was going to test it on slim Bean, but I can't get a voice dialer to install on it to get into apns
Sent from my PG86100 using xda premium
I'm super stoked I'm going to try this on the rom my wife likes then I'm giving rhythmic another spin on my end!
Sent from my HTC One V using Tapatalk 2
jaredl45600 said:
ok... I just installed Rhythmic on my wife's phone... flawless! and flashed the cricket mms fix... working!! I just wanted to drop by an tell you THANKS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Quick question on your wifes phone does it allow her to send out mms. I followed this guide but i can only receive them and not send
There's a post in the at&t Samsung Galaxy 3 original android development for cm12 running lollipop 5.0. I flashed it on my t999 and it works great. Just follow the flashing instructions and flash all the files they say to flash. Your welcome.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
So what kernel are you using?
I am dowloading it right now! Does the sim working properly since there is difference in modem!
Finally installed it. All cm features are missing
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Err....
Well, I can't say anything. I'm working on porting cm11 from the Note 2 LTE to the S3. If that works, I'm porting cm12 to the s3, hopefully.
Yeah it's an alpha build so the bells and whistles of cm features aren't available. It's basically just a working version of 5.0. As time goes on they will add the bells and whistles.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Its actually an almost perfect build for me... Only issue is camera and contacts fc when a synced contact's name is more than one word.... Even had faster GPS lock than 4.4 roms...
Don't seem to miss cm features as I don't use much... Just probably on screen buttons and skip tracks with volume button is what I'm missing
Running this on my phone. It was kind of wonky at first but after 2-3 wipes/flashes this is the best ROM I have ever run on this phone.
If you get tons of force closes, no root, and can't seem to download anything wipe and re flash.
As of now everything is working for me(including the camera using nexus camera).
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Test builds V4 is running great, ive been running it for 2 days and ive had 0 FC's! just camera doesnt work, but you can download an alternate camera from the play store (nexus camera or camera zoom FX works for me). All you have to do before flashing is modifying the "updater script", open and edit the updater script and just replace all "d2att" with "d2tmo", save changes. Do a clean flash. I use the usual apps (fb, tw, whatsapp, a couple basic games) and everything works well. I dont use any apps that use the camera (vine, instagram, etc) so I cant report on those. No need to flash a kernel or different radio.
V5 is working fine for me. Everything works except video recording(pictures work with Nexus Camera) and cast screen on Chromecast. I tried the fix for the Nexus 7 but it disconnects immediately.
I used es file manager changed all d2att to d2tmo and reziped the file and still won't flash. What am i doing wrong?
outlawnunn said:
I used es file manager changed all d2att to d2tmo and reziped the file and still won't flash. What am i doing wrong?
Click to expand...
Click to collapse
just remove the first line and then try ?
Sent from my SGH-T999 using XDA Free mobile app
outlawnunn said:
I used es file manager changed all d2att to d2tmo and reziped the file and still won't flash. What am i doing wrong?
Click to expand...
Click to collapse
I tried editing the update script using root explorer, and it did the editing. however, when I moved/copy and paste the edited update script back to the Rom zip, it would move the original/unedited update script. So this is what I did: I extracted the update script and edited with root explorer, then I emailed the edited update script to myself, then I open the rom with 7-zip on my computer and replaced the original update script with the one I edited, saved the zip to my desktop. I then proceed to flash and it worked perfectly.
allendj81 said:
I tried editing the update script using root explorer, and it did the editing. however, when I moved/copy and paste the edited update script back to the Rom zip, it would move the original/unedited update script. So this is what I did: I extracted the update script and edited with root explorer, then I emailed the edited update script to myself, then I open the rom with 7-zip on my computer and replaced the original update script with the one I edited, saved the zip to my desktop. I then proceed to flash and it worked perfectly.
Click to expand...
Click to collapse
I dont suppose you could share the file? For the rest of us.
patrickae said:
I dont suppose you could share the file? For the rest of us.
Click to expand...
Click to collapse
I rather not, for some reason the guy who put together the zip took down the thread and his account is suspended, who knows what happened. Its very easy to modify tho, give it a try.
i took a day or so by finally got my son s3 working
The current build is build 5 dated 11/25. It works better than build 4. You can use a few different cameras but stock camera still not working right. If you use Philz touch recovery you don't need to modify the script, it will flash just fine. It will say your phone is an i747 but that is just cosmetic it changes nothing with functionality like data or calls, etc. Because this is just a software rom and doesn't change anything hardware specific. Enjoy.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Thank you...
rcurtis805 said:
There's a post in the at&t Samsung Galaxy 3 original android development for cm12 running lollipop 5.0. I flashed it on my t999 and it works great. Just follow the flashing instructions and flash all the files they say to flash. Your welcome.
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
Click to expand...
Click to collapse
Where is the download link? I have been looking all over the place for CM12 on T999
I tried changing all the d2att to d2tmo and it is all changed but when I try to flash it, it gets a couple fail messages about mounting something and then I try to reboot it gets stuck in bootloop.
When I try to flash without changing the d2att it won't even flash.
Anyone got V5?