I just flashed the initial file, and then setup Google wallet. Then I rebooted into recovery and flash the second file that appears to put your build prop file back to the original Samsung settings.
I tried the other methods mentioned but they didn't work for me.
Here is the link to skynote rom thread and it contains the two files in the first post or so. http://forum.xda-developers.com/showthread.php?t=2093870 You can see who to thank for this at this thread.e
I don't take credit for any of this other than taking a chance and flashing these files from the Skynote Rom thread and trying on my Note 2 that has Cleanrom 4.0.5.
The cards I added to Wallet were my visa credit card, debit card and American Express.
Today I made two vending machine purchases using wallet with pictures attached. FYI I live in the Seattle Washington area and have not tried this wallet anywhere else.
Thanks i'm going to try this on jedi rom and see if it works.
*Update*
It installed without issue for me and setup without any FC or anything else. I'll test it out tomorrow at cvs to make sure it works but so far so good. I'm on the latest Jedi rom.
futuregerald said:
Thanks i'm going to try this on jedi rom and see if it works.
*Update*
It installed without issue for me and setup without any FC or anything else. I'll test it out tomorrow at cvs to make sure it works but so far so good. I'm on the latest Jedi rom.
Click to expand...
Click to collapse
Got it working on Jedi XpX , however, when i revert to my jedi build.prop, the wallet app dissapear.
i'd like to get it workingwith an official jedi build.prop so i'll keep trying some stuff, i'll keep you updated
Doesnt work for me on Jedi XPX. Hangs at the "Setting up Wallet for purchases" part of the install.
THANKS ALOT!!! worked on BLACKOUT RC3 like a charm.....just installed first zip and setup google wallet and then flashed second zip and walla...google wallet and spen works...AWESOME!!!:good::good:
rockinandroid said:
THANKS ALOT!!! worked on BLACKOUT RC3 like a charm.....just installed first zip and setup google wallet and then flashed second zip and walla...google wallet and spen works...AWESOME!!!:good::good:
Click to expand...
Click to collapse
I taught RC3 had the wallet stuff built right in there. No need to flash anything. Just change the build prop after setting up wallet. All these zips do is change the build props from NEXUS back to I317.
Just my 2¢
Sent from my SAMSUNG-SGH-I317 using Xparent SkyBlue Tapatalk 2
I can confirm that it works with the jedi rom. Just made my purchase today at whole foods and the receipt popped right up., really happy with this!!!
Sent from my SAMSUNG-SGH-I317 using xda premium
darksora145 said:
I can confirm that it works with the jedi rom. Just made my purchase today at whole foods and the receipt popped right up., really happy with this!!!
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
but you keep using the skynote build.prop?
then all adjustments and tweaks to build.prop by ptrm are gone you have the skynote one
i'm currently trying to find what don't work in jedi's build.prop that make the wallet dissapear when i revert it.. i'll post if ever i find anything that works.
Thanks for this, it worked on my STOCK rooted i317. Just flashed the first one, rebooted and set up Wallet, and flashed the second one. Haven't gotten to test it yet but I can't imagine having a problem with it since it let me set everything up and I was able to load back into the app after the 2nd flash. Awesome, thanks for the info OP.
No I flashed the revert to go back to note 2 and all my functionality is still good so I'm back to note 2 build prop
Sent from my SAMSUNG-SGH-I317 using xda premium
Works great on CleanRom 4.5.
Sent from my SAMSUNG-SGH-I317 using xda premium
Pple who have done this on jedi, do you use your old jedi build.prop after?
Sent from my SAMSUNG-SGH-I317M using xda app-developers app
If you downloaded the two zip files from sky notes page for Google wallet it tells you that you have to get rid of the old Google wallet stuff so it doesn't get wonky when you set up the new ones. And yes you do have to use the old build prop afterwards. That's what the finalized zip is for after you flash the step 1 zip
Sent from my SAMSUNG-SGH-I317 using xda premium
I tried this setup on my ATT note 2 and can not get past "setting up wallet for purchases". I am running Clean Rom and have followed the steps exactly. I have also tried clearing the cache and data on the wallet apk and the nfc services. Any thoughts on what to try next?
Ok, tried another method and now I am stuck at adding card though it does show as a new device added and it shows me the card that is on file.
nigelquest said:
I tried this setup on my ATT note 2 and can not get past "setting up wallet for purchases". I am running Clean Rom and have followed the steps exactly. I have also tried clearing the cache and data on the wallet apk and the nfc services. Any thoughts on what to try next?
Click to expand...
Click to collapse
nigelquest said:
I tried this setup on my ATT note 2 and can not get past "setting up wallet for purchases". I am running Clean Rom and have followed the steps exactly. I have also tried clearing the cache and data on the wallet apk and the nfc services. Any thoughts on what to try next?
Click to expand...
Click to collapse
what do you mean by cant get past? Do you mean it takes more than a few minutes and then you give up and reboot? I would make sure you uninstall any google wallet apk you have on the phone and any other traces of it. Maybe then reboot and try the two files again?
It eventually fails to add the card after a few hours. As for the first failure I gave it many, many hours. Ill give your suggestion a try though. Thanks!
livingaboard said:
what do you mean by cant get past? Do you mean it takes more than a few minutes and then you give up and reboot? I would make sure you uninstall any google wallet apk you have on the phone and any other traces of it. Maybe then reboot and try the two files again?
Click to expand...
Click to collapse
I get to this screen, get an email from Google saying I activated a new wallet and then it sits here indefinitely.
As I understand this doesn't work up here in Canada right? Are any of you guys Canadians? Love to have this.
Sent from my SGH-I317M using xda app-developers app
Now after about an hour I get this. Tried on lte and wifi.
Related
Ok so i absoloutly love the ROM, But after this last update (9-1-2012)for some reason after following the flashing process and the ROM installs and everything i go to download my apps from the play store and some if not all of my apps say that they are incompatible with my device (galaxy s3). I tried reflashing, reverting back to ICS the flashing, cleared all caches. Can someone please help me? am i missing something? am i doing something wrong? am i the only one? i dont see anything on the cm10 post either about that. please let me know. thank you
blueeyedbassist said:
Ok so i absoloutly love the ROM, But after this last update (9-1-2012)for some reason after following the flashing process and the ROM installs and everything i go to download my apps from the play store and some if not all of my apps say that they are incompatible with my device (galaxy s3). I tried reflashing, reverting back to ICS the flashing, cleared all caches. Can someone please help me? am i missing something? am i doing something wrong? am i the only one? i dont see anything on the cm10 post either about that. please let me know. thank you
Click to expand...
Click to collapse
Sounds right. Anything dependent on touchwiz wont work. You're likely to get s lot of incompatible errors because of the changes in the density as well. Running tablet mode comes at a price. you can just sideload the ones it says are incompatible or get them from blackmart.
blackmart link (use responsibly)https://dl.dropbox.com/s/t9pqttpf4p4bp76/blackmart[1].apk?dl=1
My thing is that I was using the previous version just fine was able to download apps fine so what's different in this release
Sent from my SPH-L710 using xda app-developers app
blueeyedbassist said:
My thing is that I was using the previous version just fine was able to download apps fine so what's different in this release
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
This is just taking a shot in the dark but maybe something changed in the build.prop. Try pulling the build.prop file from the last version of P.A and replacing the one in /system. Then resync w/google
Hey guys I've tried asking in the threads for these fixes but to no avail so hopefully someone will be able to help me if I make a thread for it. So my issue is that I've been using Google Wallet just fine with no issues using the "build prop edit, reboot recovery and move wallet apk into system/apps" method and it worked until a couple of CM10 updates awhile ago after which it stopped working, I've tried to go back to stock and use the touchwiz fix which also didn't work and currently I'm on the latest AOKP on which I still can't get it to work.
What seems to be happening is that the wallet app is not actually installing in the system, so after I copy the apk and restart, there is still no wallet app or anything in my drawer or if I try the zip file flash method after the restart I'll get a force close for wallet and then the app is gone as well. Not sure why it's happening or what to do, any help is appreciated and hopefully we can get me back on wallet asap, I'm glad I already used the prepaid card up lol.
I'm not sure if you posted in the correct section but here's your problem you need your permissions to be correct. make them match this
Sent from my Galaxy Nexus using xda premium
Which rom are you on and which wallet are you flashing?
Sent from my Galaxy Nexus using xda premium
bugity said:
I'm not sure if you posted in the correct section but here's your problem you need your permissions to be correct. make them match this
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Actually now that you mention it I realize it's in the wrong forum as well my bad, and I've tried that as well actually I just neglected to say it. Maybe you can advise me of everything you did and I can try it again I've got my nandroid already ready lol. And did you flash the zips or do the copy of the apk? Thanks again for the quick response.
bugity said:
Which rom are you on and which wallet are you flashing?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I'm currently on the latest AOKP, I've tried it on codefirex, CM10 and the jellybean official leak(for the leak I tried the touchwiz fix method) and I've tried r75 and r79 neither are working but the copying the r75 apk into system/app method is what worked before. On the touchwiz fix method I actually was able to get wallet open but then it would say NFC would have to be enabled at which point the whole NFC/S-beam options would mysteriously disappear from the settings screens. There would also be a random vibration for no reason every few seconds.
Here's what I do
First I flash my rom then
I reboot. And with root explorer I put the wallet apk into the /system/app folder
I then change the permissions to the correct type. Then I access my build. Prop and make the three necessary changes. After that I reboot and I am able to use wallet with no problems. Btw I am using aokp and ill post the wallet apk I use in one sec. Are you on a Sammy rom because if you are you will most likely have to flash the new lib files as well
Sent from my Galaxy Nexus using xda premium
Shels said:
I'm currently on the latest AOKP, I've tried it on codefirex, CM10 and the jellybean official leak(for the leak I tried the touchwiz fix method) and I've tried r75 and r79 neither are working but the copying the r75 apk into system/app method is what worked before. On the touchwiz fix method I actually was able to get wallet open but then it would say NFC would have to be enabled at which point the whole NFC/S-beam options would mysteriously disappear from the settings screens. There would also be a random vibration for no reason every few seconds.
Click to expand...
Click to collapse
If you are on aokp DO NOT flash the libs files. I here's the wallet I use http://db.tt/F6b4VTun
And here try this too its a modified build . Prop to be used for aokp ONLY it goes in /system/ (do not forget to do the permissions properly on both before reboot) http://db.tt/3JaUsEMv
Sent from my Galaxy Nexus using xda premium
IV had so much trouble with wallet in the past but iv recently figured out how to get it working every time and I'm sure you can too
Sent from my Galaxy Nexus using xda premium
Also NEVER Forget To RESET WALLET BEFORE a New ROM Flash or you WILL BREAK Your SECURE element and once you get wallet working make a backup of the rom so if you do one day forget you can restore the backup, reset wallet and hopefully fix the issue
Sent from my Galaxy Nexus using xda premium
bugity said:
Here's what I do
First I flash my rom then
I reboot. And with root explorer I put the wallet apk into the /system/app folder
I then change the permissions to the correct type. Then I access my build. Prop and make the three necessary changes. After that I reboot and I am able to use wallet with no problems. Btw I am using aokp and ill post the wallet apk I use in one sec. Are you on a Sammy rom because if you are you will most likely have to flash the new lib files as well
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Ok thanks for all the help I really appreciate it, I followed your instructions and am using the files you provided. I'll update in a sec, and no I tried a Sammy rom previously but as it didn't work I'm on AOKP now.
bugity said:
If you are on aokp DO NOT flash the libs files. I here's the wallet I use http://db.tt/F6b4VTun
And here try this too its a modified build . Prop to be used for aokp ONLY it goes in /system/ (do not forget to do the permissions properly on both before reboot) http://db.tt/3JaUsEMv
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Ok so I used the files provided but now the phone won't boot up at all, it goes as far as the Samsung Galaxy S3 logo and then stops and stays black no bootanimation or anything, I'm gonna restore my nandroid and just see what happens if I use the apk alone and just manually change the build prop values for product device, model and name. Would you recommend the Galaxy Nexus values or the htc jewel? I use to use the Galaxy and it worked fine. I was also using root toolbox pro to edit the build prop which use to work as well,
bugity said:
Also NEVER Forget To RESET WALLET BEFORE a New ROM Flash or you WILL BREAK Your SECURE element and once you get wallet working make a backup of the rom so if you do one day forget you can restore the backup, reset wallet and hopefully fix the issue
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I was confused about the reset wallet thing, I use to go on the wallet website and disable the app from there, not sure if that was right or not. I have not received any of the broken element msgs, there's just no wallet period lol.
Update, it didn't work. I did the move, edited the build prop but Wallet just won't appear despite being in the system/app folder rw-r-r
Sent from my SGH-I747 using xda premium
I used the ATT google wallet method and followed/flashed appropriate files, but I still keep getting add card failed sign. I tried wiping dalvic and cache as posted on OP, but it doesn't do the trick. Is there a fix to this? Would full wiping and reflashing rom do the trick?I'm currently using Ariel rom. Thanks in advance
amgpower63 said:
I used the ATT google wallet method and followed/flashed appropriate files, but I still keep getting add card failed sign. I tried wiping dalvic and cache as posted on OP, but it doesn't do the trick. Is there a fix to this? Would full wiping and reflashing rom do the trick?I'm currently using Ariel rom. Thanks in advance
Click to expand...
Click to collapse
I have the same issue. Any help would be appreciated,
Sent from my SAMSUNG-SGH-I747 using xda premium
Bump
Sent from my Galaxy Nexus using Tapatalk 2
Same here..
Sent from my SAMSUNG-SGH-I747 using xda premium
I guess a lot of people are experiencing the problem. Would there be something wrong with the Google server?
Sent from my Galaxy Nexus using Tapatalk 2
bump
Did you edit build.prop before trying to add the card?
Double check the instructions here: http://forum.xda-developers.com/showthread.php?t=1769083
Sent from my SGH-I747 using xda app-developers app
Had this problem on my Galaxy Nexus after an update. Nothing I did was able to fix it (reset wallet, reinstall, install modded apk, nandroid to working backup, change build.prop, change android ID, etc). I called up Google Wallet support 5 weeks ago and they haven't helped at all.
The only solution was to get a new phone. Probably not what you want to hear, but that's what I did. I still have the old phone and check it periodically, but I always get the "Add card failed" error on it.
Greycloak42 said:
Did you edit build.prop before trying to add the card?
Double check the instructions here: http://forum.xda-developers.com/showthread.php?t=1769083
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Gregcloak42 is correct, you have to add the credit cards before putting the build.prop to back to the original settings. In my situation I had to change my settings from Galaxy Nexus to htc_jewels because I tried to add the cards after the build.prop to the original settings. Switching to the different name allowed me to add my cards.
The OP in the Google wallet thread SPECIFICALLY says you have to add the cards via desktop first. A workaround for this is to use the card you want to add on the play store. Then follow the directions again, and it should work.
Sent from my SGH-I747 using xda app-developers app
Same issue here! My build.prop is correct, I've added the cards on desktop with browser etc.
Any other idea?
dy/dx said:
Same issue here! My build.prop is correct, I've added the cards on desktop with browser etc.
Any other idea?
Click to expand...
Click to collapse
I had issues with mine, so when task released the 1/4 build, I wiped the system partition and started over. Fixed it right up.
Sent from my SGH-I747 using xda app-developers app
I had this issue after I upgraded SynergyROM on my GS3 and forgot to wipe gwallet before flashing.
Wiping system, data, and all the other folders prior to factory reset and re-flash of the new ROM fixed it. Thanks!
The latest version of Wallet may not like your phone. I would try installing the last version to see if that will work for you. Also, obviously ensure that you don't revert your build.prop back to stock until you successfully add the cards. I can confirm latest version works flawlessly on Task's AOKP ROM.
Google Wallet Installer for Verizon, AT&T, T-Mobile, and US Cellular Samsung Galaxy S3.
Requires ROOT, an UNLOCKED BOOTLOADER, and BUSYBOX!(A deodexed ROM is just recommended)
My newest project, RemoteFlash, was just released! Take a look and give it a try!
Wallet Installer Is Now Available For Free To All Supported Carrier Models On XDA! (Donations Appreciated)
My application, "Wallet Installer", will install Google Wallet on almost any US based Samsung Galaxy S3. It simply edits your build.prop and then places the correct modifications into your system. It downloads all the files from my personal server, which is pretty quick. Just select the appropriate Rom type: AOSP, JB Touchwiz, or ICS TouchWiz, and then your carrier: Verizon, AT&T, T-Mobile, or US Cellular. I also added a restore option for your build.prop, so you can restore it after you setup Google Wallet. Hopefully this helps you out and makes the process easier!
Wallet Installer has been updated on the server side. The credit goes to Paul Obrien for the new version! To install it, simply reset Google Wallet, delete it, and then rerun Wallet Installer! Make sure to also have BusyBox installed/updated!
Please donate if my work helps you : )
V3: No Recovery/More Stable
Original Thread: Here
And as always: I take no responsibility for bricked devices, whether a soft brick or a full on brand new coffee coaster.
This sounds great except for the recovery flash. Does the app offer to skip this step so we can keep whatever recovery we may already have installed?
rozzco said:
This sounds great except for the recovery flash. Does the app offer to skip this step so we can keep whatever recovery we may already have installed?
Click to expand...
Click to collapse
Unfortunately, no. It has to use an open, unencrypted recovery to flash the files. I would allow use of CWM if it was unencrypted, but it's not. An option I am planning on adding in the future is the option to backup your current recovery and flash it after TWRP has been used.
Sent from my SCH-I535 using xda premium
Just tried it and it boots into twrp but nothing happens.
Sent from my Black Jelly I747 by graffixnyc theme by wanam ported and tweaked by David Dee
Phoneguy589 said:
Just tried it and it boots into twrp but nothing happens.
Sent from my Black Jelly I747 by graffixnyc theme by wanam ported and tweaked by David Dee
Click to expand...
Click to collapse
It sounds like you had a bad download. Go under your /sdcard partition and look for files like: "Wallet.zip", "recovery.img", "Fix.zip" and delete them(they shouldn't be there if they flashed correctly). After deleting those files, try again. Make sure you have a good data connection. Preferably WiFi.
Sent from my SCH-I535 using xda premium
Also, make sure you have busybox installed.
That's what it was...needed busy box installer. Worked great. I had the apk and files for libs but that was much better. Thank You, and nice work.
Sent from my Black Jelly I747 by graffixnyc theme by wanam ported and tweaked by David Dee
Phoneguy589 said:
That's what it was...needed busy box installer. Worked great. I had the apk and files for libs but that was much better. Thank You, and nice work.
Sent from my Black Jelly I747 by graffixnyc theme by wanam ported and tweaked by David Dee
Click to expand...
Click to collapse
No problem! I just hope more people give it a shot! It won't disappoint.
Sent from my SCH-I535 using xda premium
as soon as the recovery issue is ironed out, I'll give it a spin.
mdwbeex said:
as soon as the recovery issue is ironed out, I'll give it a spin.
Click to expand...
Click to collapse
Technically the open recovery isn't an issue, at least not development wise. I use it because there are different versions of CWM rolling around, and they aren't all capable of the same things. This way, with an open recovery flash, I greatly reduce the chance of bricking/other issues.
Sent from my SCH-I535 using xda premium
Recovery Return Question
Thanks for putting this together.
After flashing this, can users return to the recovery of their choice, or are we locked in to TWRP 2?
tobnddl said:
Thanks for putting this together.
After flashing this, can users return to the recovery of their choice, or are we locked in to TWRP 2?
Click to expand...
Click to collapse
You can go to whatever recovery you like! TWRP is only used for safety reasons during the flash.
Sent from my SCH-I535 using xda premium
It's not working for me. It reboots into recovery but doesn't do anything. Then the phone doesn't boot into the room and I have to re flash the rom
Edit: I to, did not have busybox installed. you may want to put a warning on the app
---------- Post added at 10:26 PM ---------- Previous post was at 10:03 PM ----------
Also, if the build prop was edited to SPH-710 the Samsung voice program would still work
EXACTLY what I was looking for. I saw the entire post about getting it working, and just didn't feel that I was "qualified" enough to do what was required. I bought the app and figured I'd give it a try. It took a bit longer to download from the Play Store for some reason, but once it was done, it installed rather quickly.
I then ran the program, and selected as it was instructed. POOF it started installing, and then the phone rebooted into TWRP (I already use TWRP anyway), and all went well. I set up my account and that too went well. I tested it as I could and it works, then I decided to restore my build prop, after that again the phone rebooted, and then tested out wallet. It too works again.
Now then the only thing I am thinking about is automatic updates. I have to have that for another program for my work. I've seen the other post that you do not want the auto updates on. If on the next auto update it causes a problem I will report that here, but I think that just re running the program letting it do the build prop again, get it working, then restoring the build prop should be an easy fix for that.
dB Zac said:
It's not working for me. It reboots into recovery but doesn't do anything. Then the phone doesn't boot into the room and I have to re flash the rom
Edit: I to, did not have busybox installed. you may want to put a warning on the app
---------- Post added at 10:26 PM ---------- Previous post was at 10:03 PM ----------
Also, if the build prop was edited to SPH-710 the Samsung voice program would still work
Click to expand...
Click to collapse
So you got it working? Sorry for overlooking busy box in the OP. Hope everything worked out okay.
Sent from my SCH-I535 using xda premium
MasterDecker said:
EXACTLY what I was looking for. I saw the entire post about getting it working, and just didn't feel that I was "qualified" enough to do what was required. I bought the app and figured I'd give it a try. It took a bit longer to download from the Play Store for some reason, but once it was done, it installed rather quickly.
I then ran the program, and selected as it was instructed. POOF it started installing, and then the phone rebooted into TWRP (I already use TWRP anyway), and all went well. I set up my account and that too went well. I tested it as I could and it works, then I decided to restore my build prop, after that again the phone rebooted, and then tested out wallet. It too works again.
Now then the only thing I am thinking about is automatic updates. I have to have that for another program for my work. I've seen the other post that you do not want the auto updates on. If on the next auto update it causes a problem I will report that here, but I think that just re running the program letting it do the build prop again, get it working, then restoring the build prop should be an easy fix for that.
Click to expand...
Click to collapse
Glad it helped you! Also, thanks for the thorough post, It's really appreciated. I leave my auto-updates on, but I haven't had any issues. If you were to have issues, you can just reset wallet, restore built.prop(if you haven't already), and run Wallet Installer again.
Sent from my SCH-I535 using xda premium
Rom Updates
What happens after you install this get it working then flash a new version of a rom... Im currently using Tasks aokp jellybean rom. Do I need to do this everytime I update a rom or just do it once nad it's done, Also Task has 4.2 available does this matter once I update to his 4.2 releases
njinstantkarma said:
What happens after you install this get it working then flash a new version of a rom... Im currently using Tasks aokp jellybean rom. Do I need to do this everytime I update a rom or just do it once nad it's done, Also Task has 4.2 available does this matter once I update to his 4.2 releases
Click to expand...
Click to collapse
Every time you want to flash a new ROM, you have to reset google wallet. Then you can use my app again, after the new ROM flash, and you'll have wallet again. When it comes to 4.2 in specific I can't give you a straight answer, since I don't have access to a 4.2 ROM. My guess is that it will work fine, but it's never been tested.
Sent from my SCH-I535 using xda premium
If I just update a new version of a current Rom as I do weekly doing a dirty flash or not wiping just clearing dalvic cache etc, would I still need to re-install the app. Or only on a full wipe or a new Rom would I need to start from scratch? .
Another question if I re-install the app would I need to setup the payment every time and add new funds or cards or would all that information be available in the account
njinstantkarma said:
If I just update a new version of a current Rom as I do weekly doing a dirty flash or not wiping just clearing dalvic cache etc, would I still need to re-install the app. Or only on a full wipe or a new Rom would I need to start from scratch? .
Another question if I re-install the app would I need to setup the payment every time and add new funds or cards or would all that information be available in the account
Click to expand...
Click to collapse
If you're dirty flashing, you should be fine leaving Wallet as is, but if you need to do a wipe, you should really reset Wallet. All of that information is saved on Google's servers, so it will be there next time
Sent from my SCH-I535 using xda premium
Anyone Having trouble with in-app purchasing specially on viper or google apps?
Recently after updating to 4.4.2 iam having problem with it and sometimes iam getting "your device does not support in app purchases"
Which is wierd! anyone had this issue before?
Are you running my ported kitkat rom? I tried to purchase an app yesterday but it wouldn't work. Been planning to look into this but haven't had time. Haven't tried since yesterday either.
Sent from my SPH-L710 using Tapatalk
DocHoliday77 said:
Are you running my ported kitkat rom? I tried to purchase an app yesterday but it wouldn't work. Been planning to look into this but haven't had time. Haven't tried since yesterday either.
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Yes iam using LiquidSmooth Rom,also tried other roms and it has the same problem for some reason,is there any option to enable it or its from ROM or Build itself?
Or it could be a very simple explaination that the App either is not updated to Kitkat or does not like rooted devices.
nagashei said:
Yes iam using LiquidSmooth Rom,also tried other roms and it has the same problem for some reason,is there any option to enable it or its from ROM or Build itself?
Click to expand...
Click to collapse
In app manager, try clearing data on all Google apps, most importantly, play store, gms, gsf, gmail and any others you think might be closely tied to them. Reboot and reset up. If that doesn't work, try again but also uninstall updates. Reboot and give it time to auto update them again.
Sent from my SPH-L710 using Tapatalk
DocHoliday77 said:
In app manager, try clearing data on all Google apps, most importantly, play store, gms, gsf, gmail and any others you think might be closely tied to them. Reboot and reset up. If that doesn't work, try again but also uninstall updates. Reboot and give it time to auto update them again.
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
I will try that,i cleared google play and removed updates and worked for apps connected to it but others like viper/tango/skype arent working
Check in your build.prop to make sure your device model is correctly entered. Its just a guess but is what I plan to try first when I get a chance to look into it in my rom.
Sent from my SPH-L710 using Tapatalk
DocHoliday77 said:
Check in your build.prop to make sure your device model is correctly entered. Its just a guess but is what I plan to try first when I get a chance to look into it in my rom.
Sent from my SPH-L710 using Tapatalk
Click to expand...
Click to collapse
Still Cant find a solution this is really wierd
Best I can think of is to nandroid, odin back to stock with latest firmware, then flash your rom clean and try it that way. If it still doesnt work try again on stock touchwiz. This way youll know if its something wrong with your account, or something wrong with your rom and data. Also, from your computer, manually log out of any google services.
Restoring the nandroid data backup will likely cause it to happen again. Mine started working again on its own, so im not sure what the cause was...
Sent from my SGH-T999 using Tapatalk
DocHoliday77 said:
Best I can think of is to nandroid, odin back to stock with latest firmware, then flash your rom clean and try it that way. If it still doesnt work try again on stock touchwiz. This way youll know if its something wrong with your account, or something wrong with your rom and data. Also, from your computer, manually log out of any google services.
Restoring the nandroid data backup will likely cause it to happen again. Mine started working again on its own, so im not sure what the cause was...
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
i will try that
nagashei said:
i will try that
Click to expand...
Click to collapse
None Worked so far