Develop Bugs

**cm9kernels/ cm10 kernels??

I would like to know if there are any kernels compatible with the new cm10 build by teamchopsticks......?? Would the darkside venom 05 #7 would work on cm10????
Thanks.. Would love to be able to oc to 1.83ghz..hehe

MandoH said:
I would like to know if there are any kernels compatible with the new cm10 build by teamchopsticks......?? Would the darkside venom 05 #7 would work on cm10????
Thanks.. Would love to be able to oc to 1.83ghz..hehe
Click to expand...
Click to collapse
I believe that cm10 is based on cm9 kernal so it might. But it very well might not! lol

cm9/cm10
onlychevys said:
I believe that cm10 is based on cm9 kernal so it might. But it very well might not! lol
Click to expand...
Click to collapse
CM9 is ICS.....and CM10 is JB..... so i'm not sure if it will work..... Anyone else got any ideas???

MandoH said:
CM9 is ICS.....and CM10 is JB..... so i'm not sure if it will work..... Anyone else got any ideas???
Click to expand...
Click to collapse
My idea is to wait until someone releases one that claims compatibility with JB

You can use the same kernel throughout specific android versions and they will work fine. For example, you can use a CM9 kernel with ICS and all ICS revisions. However, a CM9 (ICS) kernel will not work with CM10 (JB). Even in the event it DOES boot, you're going to run into a lot of issues. Either way, even if you decide to try, as long as the kernel is specific for your device, worse case scenario is that you soft brick and have to ODIN.

Tdj just released a jb kernel
Sent from my SAMSUNG-SGH-T989 using xda premium

You can use the Darkside Venom #6 Aroma #1. I am on CM9 RC2. You just have to do a darkside cache wipe first.

TDJ Venom
TDJ has kernels posted for both CM10 and the JB AOKP ROMS

[2012/08/26] Unofficial AOKP JB for TF300t

This is an unofficial AOKP build for the tf300t.
Basically it is current AOKP with loganmc10s device files.
Thanks to termleech for helping me fix the boot.blob issue!
Changelog
2012/08/26
Updated to latest AOKP commits (2012/08/26)
Working toggles thanks to http://gerrit.sudoservers.com/#/c/2896/
2012/08/18
boot.blob is now flashed correctly, you don't need to install CM10 prior to this ROM anymore
Instructions
Download ROM
Download GAPPS
Wipe
Flash ROM
Flash GAPPS
...
Profit!
Device tree here: https://github.com/loganmc10
AOKP Source here: https://github.com/aokp
Known issues
Navbar cannot be customized (except icon transparency)
GPS not working

Nice, will try this out today!
Boot animation keeps looping. Do you have to be stock before flashing this?

Turbojugend said:
Nice, will try this out today!
Boot animation keeps looping. Do you have to be stock before flashing this?
Click to expand...
Click to collapse
Don't have to be much of anything besides rooted w/ custom recovery. It should operate fine unless there's something wrong with the boot.img

I was running Hydro, wouldn't boot, went back to stock, will flash recovery and try flashing again.
Edit - Don't know what else I can be doing wrong. I went back to stock, flashed TWRP 2.2.1.3 and wiped, installed this rom, and it stays on the boot animation. Any ideas?

Turbojugend said:
I was running Hydro, wouldn't boot, went back to stock, will flash recovery and try flashing again.
Edit - Don't know what else I can be doing wrong. I went back to stock, flashed TWRP 2.2.1.3 and wiped, installed this rom, and it stays on the boot animation. Any ideas?
Click to expand...
Click to collapse
Check out Term's AOKP JB thrad to see if he posted a boot.img/flashable kernel. That sounds like what your issue is. I have heard that TWRP doesn't properly restore/wipe boot partition.

doesn´t boot with CWM here.
Stuck on the AOKP bootanimation

mikaole said:
doesn´t boot with CWM here.
Stuck on the AOKP bootanimation
Click to expand...
Click to collapse
Yeah I knew it wasn't me, every other ROM has worked fine.
---------- Post added at 07:20 PM ---------- Previous post was at 07:15 PM ----------
NYCHitman1 said:
Check out Term's AOKP JB thrad to see if he posted a boot.img/flashable kernel. That sounds like what your issue is. I have heard that TWRP doesn't properly restore/wipe boot partition.
Click to expand...
Click to collapse
But that is irrelevant if you go back to stock.

It's fantastic, thanks man.

Thanks for this. I just dove in! Everything seems buttery. :thumbup:
Sent from my Transformer Pad TF300T using Tapatalk 2

Flashed from CM10 this time and it worked. Buttery smooth rom, good job!

even GPS works?

Im also intrested on knowing if the GPS works.
BTW thanks for the rom, alwyas appreciate the developement on this device.

fromanbr said:
even GPS works?
Click to expand...
Click to collapse
Negative... as the same with other JB roms for this pad.
Sent from my Transformer Pad TF300T using Tapatalk 2

The reason it works fine for those who already have jb is aokp still doesnt make the boot.blob correctly. So unless the OP switches it out with one built from a working build those not already on jb will not boot.
@karodee I'm gonna send you a DM later you can continue the AOKP builds. Ive got my own ROM I'll be releasing here soon so I'll give you ant help you want or need on the aokp stuff.
Sent from my Nexus 7 using Tapatalk 2

termleech said:
The reason it works fine for those who already have jb is aokp still doesnt make the boot.blob correctly. So unless the OP switches it out with one built from a working build those not already on jb will not boot.
@karodee I'm gonna send you a DM later you can continue the AOKP builds. Ive got my own ROM I'll be releasing here soon so I'll give you ant help you want or need on the aokp stuff.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Figured it had to be something like that, since I used your builds before without issue.

NYCHitman1 said:
Check out Term's AOKP JB thrad to see if he posted a boot.img/flashable kernel. That sounds like what your issue is. I have heard that TWRP doesn't properly restore/wipe boot partition.
Click to expand...
Click to collapse
The boot restore was actually fixed two versions of TWRP ago. The most recent update also fixed external SD card support.

First off. Thanks I love AOKP. Is anyone else having notification toggle problems? I had preview two on before and they worked fine. I did a full wipe and flashed this and the toggles don't work at all. They don't even show up. Any ideas?
Sent from my Galaxy Nexus using xda app-developers app

wheelerr said:
First off. Thanks I love AOKP. Is anyone else having notification toggle problems? I had preview two on before and they worked fine. I did a full wipe and flashed this and the toggles don't work at all. They don't even show up. Any ideas?
Click to expand...
Click to collapse
Do you mean you can't customize the toggles displayd in the notification area? I think that is currently not implemented in AOKP, they just recently merged the battery icon for the tablet navbar. Or do you mean the toggles that are there by default do not work? I tried them and they work for me :-/ Could you give a logcat?
Regards

karoodee said:
Do you mean you can't customize the toggles displayd in the notification area? I think that is currently not implemented in AOKP, they just recently merged the battery icon for the tablet navbar. Or do you mean the toggles that are there by default do not work? I tried them and they work for me :-/ Could you give a logcat?
Regards
Click to expand...
Click to collapse
I do mean those toggles. They were in the previous preview. That's why Im confused. The OLD preview was working fine. This latest one doesnt work.
Oh well, we'll see what happens.

I like the boot animation, but this appears to be a port of cm10, not the aokp that is based on stock. What sucks is it doesn't have some of the cm features like battery percentage.

CM10 update build???

I am currently running CM10 alpha 4.3 and I am loving it!! Question, when a new build comes out, do i just put it on phone and update it in recovery on top of the previous version, or is it recommend to flash in another manner for it to work properly, also should i wipe data,delvik,cache or anything before flashing a new build?
Keep up the Great work guys !!!!!
:good:

No need to wipe anything but cache/dalvik when upgrading versions of the same ROM

ya same rom they say cache and delvic cache is all that needs to be wyped... which is nicce.... as long as your faithful to one rom lol...... but im running the same rom and is the crt off animation only working sometimes for you as well?

?
stank656 said:
ya same rom they say cache and delvic cache is all that needs to be wyped... which is nicce.... as long as your faithful to one rom lol...... but im running the same rom and is the crt off animation only working sometimes for you as well?
Click to expand...
Click to collapse
W
Yes works when it wants to!!!

icekube187 said:
I am currently running CM10 alpha 4.3 and I am loving it!! Question, when a new build comes out, do i just put it on phone and update it in recovery on top of the previous version, or is it recommend to flash in another manner for it to work properly, also should i wipe data,delvik,cache or anything before flashing a new build?
Keep up the Great work guys !!!!!
:good:
Click to expand...
Click to collapse
I started with CM10 alpha 4 and have flashed 4.1, 4.2, and 4.3 without wiping or clearing anything... no problems here...buttery smooth :::update::: flashed yesterday to 4.4, also not wiping/clearing ANYTHING, and all is good =)

founderbrn said:
I started with CM10 alpha 4 and have flashed 4.1, 4.2, and 4.3 without wiping or clearing anything... no problems here...buttery smooth
Click to expand...
Click to collapse
I'm hearing a lot of happiness about this ROM. Running CM9 Alpha6. I guess I can go give it a try. Do you all still have Airplane Mode being locked, or LOS? Ima go check out the thread too.

icekube187 said:
I am currently running CM10 alpha 4.3 and I am loving it!! Question, when a new build comes out, do i just put it on phone and update it in recovery on top of the previous version, or is it recommend to flash in another manner for it to work properly, also should i wipe data,delvik,cache or anything before flashing a new build?
Keep up the Great work guys !!!!!
:good:
Click to expand...
Click to collapse
4.4 is out if you didn't know yet

oshinqwe said:
4.4 is out if you didn't know yet
Click to expand...
Click to collapse
4.4 did not really change a whole lot...except the boot animation. I get the Airplane mode bug constantly when not on wifi
Sent from my SPH-D710 using xda app-developers app

[Q] Can I flash any kernel after flashing a rom?

I use cm10 build 6, can I go ahead and pick a kernel to flash over the stock cm kernel?

Well the kernel you want must be compatible with the rom you are using and your device. For example if you are on CM10 you must flash kernels built for CM10/jelly bean. Otherwise you will get boot loops.
There might be some kernels for CM10 in the development section of Galaxy wonder.
Sent from my GT-I8150 using xda app-developers app

If kernel is for your Custom ROM that you have, you obv can.

flash the kernel that is exactly for ur ROM
kernel that is for CM10
kernel that is for CM9

dadat0 said:
I use cm10 build 6, can I go ahead and pick a kernel to flash over the stock cm kernel?
Click to expand...
Click to collapse
It's better to stay with the same Kernel, from my point of view, I guess if you shared with us why do you wanna change the Kernel, there might be a solution for your problem, a friend of mine Flashed a different kernel and it was supposed to be compatible, but still he had problems and he flashed everything back again.

I wanted to use other governors. Btw I flashed a new kernel and it seems fine as of now

dadat0 said:
I wanted to use other governors. Btw I flashed a new kernel and it seems fine as of now
Click to expand...
Click to collapse
Good for you, as long as everything is working smoothly, then good luck with the new Kernel:good:

is it really just limited by CM9/CM10? Like if I am using acro's cm9 RC6 and the kernel was released after RC7 was released, maybe some of the extra features in RC7 causes a slightly different coding for the kernel which of course may cause problems if you use it on RC6?
also i suppose there's no need for clearing data/cache, fixing permission etc when flashing kernel right?
sorry if I'm not supposed to ask questions in a question. I just feel this is relevant to the title and i feel that it is better when people can just read this post and learn more about kernels. The list of how-tos in the dev section has not much details on kernels

egagah said:
is it really just limited by CM9/CM10? Like if I am using acro's cm9 RC6 and the kernel was released after RC7 was released, maybe some of the extra features in RC7 causes a slightly different coding for the kernel which of course may cause problems if you use it on RC6?
also i suppose there's no need for clearing data/cache, fixing permission etc when flashing kernel right?
sorry if I'm not supposed to ask questions in a question. I just feel this is relevant to the title and i feel that it is better when people can just read this post and learn more about kernels. The list of how-tos in the dev section has not much details on kernels
Click to expand...
Click to collapse
Nope no problem at all. You can even flash R7 kernel on every previous version of arco cm. as long it is for the same android version
No need to do that. But just to play everything save it is better to do wipe cache and dalvik no need to wipe data
Sent from my HTC Sensation using xda premium

reddvilzz said:
Nope no problem at all. You can even flash R7 kernel on every previous version of arco cm. as long it is for the same android version
No need to do that. But just to play everything save it is better to do wipe cache and dalvik no need to wipe data
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
just adding on to your post, i've tried flashing hurtsky's 2.2 fixed without wiping anything, not a single problem =)

egagah said:
just adding on to your post, i've tried flashing hurtsky's 2.2 fixed without wiping anything, not a single problem =)
Click to expand...
Click to collapse
I don't say you "must" i just said to play it save. Is it too much if we try prevent something from happening better than facing it?
Not all phone are the same as your's sir. Sometimes other phone need to do that so that there aren't any problems with it.
Sent from my HTC Sensation using Xparent Green Tapatalk 2

Paranoid Android 2.99?

I can't seem to get this to work. I am running PA 3.10 but its too 'experimental' yet to use on a daily basis. Any special tricks I need to get this version to work? Or a list of what kernels are known to work? I suspect that it is a kernel issue.

hypocritelecteur said:
I can't seem to get this to work. I am running PA 3.10 but its too 'experimental' yet to use on a daily basis. Any special tricks I need to get this version to work? Or a list of what kernels are known to work? I suspect that it is a kernel issue.
Click to expand...
Click to collapse
if u wanna use PA try 2.99. its way too stable for daily use.
& bdw there is 4.2.2(Evervolv) available stable version. U can try it.

hypocritelecteur said:
I can't seem to get this to work. I am running PA 3.10 but its too 'experimental' yet to use on a daily basis. Any special tricks I need to get this version to work? Or a list of what kernels are known to work? I suspect that it is a kernel issue.
Click to expand...
Click to collapse
try Evervolv 4.2.2
EXTREMELY STABLE :silly::silly:

Maybe I am missing something but isn't evervolv missing most if not all of the features and options of PA?
If you could point me to the stable version of AOSPA 4.22 that would be great. I only can find the one thread that has the buggy version.

hypocritelecteur said:
Maybe I am missing something but isn't evervolv missing most if not all of the features and options of PA?
If you could point me to the stable version of AOSPA 4.22 that would be great. I only can find the one thread that has the buggy version.
Click to expand...
Click to collapse
PA is not stable at the moment so i suggest Evervolv
1ce will update his PA rom soon

Seraz007 said:
PA is not stable at the moment so i suggest Evervolv
1ce will update his PA rom soon
Click to expand...
Click to collapse
Maybe he wont.
Sent from my One V using xda premium

lars1216 said:
Maybe he wont.
Sent from my One V using xda premium
Click to expand...
Click to collapse
no prob by me
satisfied with evervolv

Seraz007 said:
no prob by me
satisfied with evervolv
Click to expand...
Click to collapse
So... you never answered--does Evervolv have the hybrid mode and cusotmization options of PA or is just a straight vanilla rom, because thats what it sounds like when I read the description.
And does anyone know how to get 2.99 working?

Evervolv is a vanilla rom.
Sent from my One V using xda premium

hypocritelecteur said:
So... you never answered--does Evervolv have the hybrid mode and cusotmization options of PA or is just a straight vanilla rom, because thats what it sounds like when I read the description.
And does anyone know how to get 2.99 working?
Click to expand...
Click to collapse
2.99 is working
just flash the hellboy kernel( not the 4.2 one)
or u can also try super sick kernel

So which hellboy kernel do I use? There are tons of them and not really labeled or explained coherently.
Do I just get the latest one?
Seraz007 said:
2.99 is working
just flash the hellboy kernel( not the 4.2 one)
or u can also try super sick kernel
Click to expand...
Click to collapse

i used this one here for PA 2.99
http://www.mediafire.com/?svp4x7vo15jp12f

Use Evervolv
I think you will be better off using Evervolv. I tried the april 27 version and it was very good. There is also a newer version now available.