AOKP Rom and battery Charging - Gen9, Gen10 General

Just a quick note,
Loaded Surdu's AOKP Rom last week on my G9/80 and all my problems with WiFi disconnecting from my password protected wireless network are completely gone. GPS takes about a min longer to lock onto signal compared to Rom 4.0.7 but works just fine.
The biggest difference I have noticed is that with all prior Roms I could only use the cable as provided by Archos for "fast" charging", all other cables would take days for my tablet to charge. The AOKP Rom allows me to use any cable and they all work for "fast" charging. Very convenient.
Thanks Surdu!

lootolooto said:
Just a quick note,
Loaded Surdu's AOKP Rom last week on my G9/80 and all my problems with WiFi disconnecting from my password protected wireless network are completely gone. GPS takes about a min longer to lock onto signal compared to Rom 4.0.7 but works just fine.
The biggest difference I have noticed is that with all prior Roms I could only use the cable as provided by Archos for "fast" charging", all other cables would take days for my tablet to charge. The AOKP Rom allows me to use any cable and they all work for "fast" charging. Very convenient.
Thanks Surdu!
Click to expand...
Click to collapse
Hello, I would also install I aokp rom, but the adb shell I do not recognize the device.
Can you help me? thanks

You probably need to install the Archos USB drivers. Search around the forum, and the sticky posts, there are instructions for everything. If it's the USB drivers, you can find them on the Archos site. There are instructions there if you're running Linux too.
Sent from my GT-I9001 using Tapatalk 2

pix_fax said:
Hello, I would also install I aokp rom, but the adb shell I do not recognize the device.
Can you help me? thanks
Click to expand...
Click to collapse
I used Quinny's guide found on the link below to install it.
http://forum.xda-developers.com/showthread.php?t=1413293
It is under the Gen8 General section but worked perfectly for my Gen9.

lootolooto said:
I used Quinny's guide found on the link below to install it.
http://forum.xda-developers.com/showthread.php?t=1413293
It is under the Gen8 General section but worked perfectly for my Gen9.
Click to expand...
Click to collapse
Thank you, now it works, read my adb on your device.
A good friend make!:good:

lootolooto said:
Just a quick note,
The biggest difference I have noticed is that with all prior Roms I could only use the cable as provided by Archos for "fast" charging", all other cables would take days for my tablet to charge. The AOKP Rom allows me to use any cable and they all work for "fast" charging. Very convenient.
Thanks Surdu!
Click to expand...
Click to collapse
Hi surdu_petru, as you mentioned, in new [email protected] versión this improvement will be implemented?
Thx for u work.

battery charging
Well........I just loaded 4.0.24 slim as updated by Surdu ( thank you kindly sir!) And the battery charging is back to slow charging with many cables?
This tells me that something in the firmware is causing it?
Oh well.........

Related

[26 MAY] USB Host mode for HD2

Update: We finally have usb host mode working on leo.
The interrupt problem i was having was fixed by liiochen, right here (his blog). He has also tested a few devices like keyboard, mouse, storage etc..
Attached is the kernel and modules in a cwm zip. usb mass storage, usb charging, usb tether and usb adb will NOT work. adb over wifi should be fine. If you were going to ask, it's based on the latest tytung kernel.
Requirements:
ICS rom
Self powered hub OR a Y USB cable
How to:
1) Reboot to recovery
2) flash file
3) reboot to android
It supports both clk/magldr.
Credits:
liiochen, cotulla, markinus, sven killig, tytung
good luck .
http://forum.xda-developers.com/showthread.php?t=1459304
Good luck
awesome
pirlano said:
awesome
Click to expand...
Click to collapse
Cant wait for this to be functional on our HD2's
great effort out there man !!
good luck with your work !
Hello! Any news about this great project?
Salvestro said:
Hello! Any news about this great project?
Click to expand...
Click to collapse
+1
Sent from my HTC HD2 using xda premium
any news
great that some1 is working on this as its something that i want for my hd2 especially if u can.get tv out working wish ud post news on how ur getting on and more.developers would help u out i think u should do.a poll on how many people want this as id say a large percentage of hd2 owners on here would say they do. when i finally retire my hd2 would be great to turn it into a media centre by connecting it to tv and a hard drive for files. i hope u keep.at it until u get it working and if u want a beta tester count me in!!
Maybe Rick gave up on this thread, considering none of the posts in it (including this one) apart from his have been development related (we are in the development forum...)
Also, don't you think if he had news he'd post it?
mikeysteele said:
Maybe Rick gave up on this thread, considering none of the posts in it (including this one) apart from his have been development related (we are in the development forum...)
Also, don't you think if he had news he'd post it?
Click to expand...
Click to collapse
I haven't given up on this but yeah, such people really do nothing but spam the thread for no reason. I will require 2.6.33 kernel at a minimum to continue because usb stack interface was changed between .32 and .33 linux. So instead of starting from scratch, i have asked tweakos who already has a .33 kernel running perfectly for the source code for me to continue, He mentioned he had some data loss but has a backup and it would take him around 4~5 days to recover and upload that somewhere.
As for the news, whatever news i would have about the host controller wouldn't be understood properly as most of it would be regarding low level stuff or unless the news is about release..
As for the possible uses of usb host would be:
1) USB joysticks, (any controller that works with linux) so you can play psx emulator with real controls, and other supporting games
2) USB TV in, Watch TV on your HD2 using a USB powered TV tuner card.
3) USB TV out, Use larger displays for your HD2 using usb monitors or some kind of usb video adapters certified for use with linux
4) USB sound cards for those who want real quality audio with an external usb sound card, but i think android does not support this. will require GNU/Linux distro.
Infact anything that works properly with USB 2.0 in linux will work in kernel space and can be used by apps which have ability for such hardware.
Wow, that's great. I love USB TV out function.
I want it, good luck
Good luck with this one. It would be great to have on our beloved hd2's
Rick_1995 said:
I haven't given up on this but yeah, such people really do nothing but spam the thread for no reason. I will require 2.6.33 kernel at a minimum to continue because usb stack interface was changed between .32 and .33 linux. So instead of starting from scratch, i have asked tweakos who already has a .33 kernel running perfectly for the source code for me to continue, He mentioned he had some data loss but has a backup and it would take him around 4~5 days to recover and upload that somewhere.
Click to expand...
Click to collapse
How about using my kernel 2.6.35.14 forked from ACA which is forked from Marc? I have done a lot of work making it very stable and fast...
Rick_1995 said:
. There are posts which confirm that OTG worked in froyo sense, so i will be testing the support in froyo roms and gnu/linux builds like ubuntu for further research.
Click to expand...
Click to collapse
Which froyo roms have OTG support?
It would be useful to use one for Ubuntu http://forum.xda-developers.com/showthread.php?t=1025499 (and possibly Debian http://forum.xda-developers.com/showthread.php?t=1029390) via VNC
Thanks
Robbie P said:
Which froyo roms have OTG support?
It would be useful to use one for Ubuntu http://forum.xda-developers.com/showthread.php?t=1025499 (and possibly Debian http://forum.xda-developers.com/showthread.php?t=1029390) via VNC
Thanks
Click to expand...
Click to collapse
Dunno if they would work, btw with my kernel i have usb root showing up but cannot yet test anything because my usb hub seems to be broken and i don't have any usb female port lying around.
OP updated.
Hi sry slightly of topic....is there a new version of magldr in the works? What is the expected time of release?
Many thanks
Sent from my HD2 using Tapatalk

Several Questions

OK, so I got the Galaxy s3 about a week ago. I am thinking about rooting it, and installing a custom ROM. One thing I have noticed is the battery life isn't good. It drops maybe one percent every 10 minutes maybe give or take. Usually from my house to my bustop wth spotify playing it will drop to 94-89 percent roughly. Is this the average it should drop? Not sure if I should exchange it out.
Anyway, I also get a flickering screen when I use some battery booster app. I have since not used it and don't have the problem anymore.
OK, few questions: I want to root it, how do I find out the versions of the rooting software to use? Can someone link me to an ATT rooting threat? I cannot seem to find one. Also, what custom ROM would you guys suggest? Once again, I am new to this stuff, and still trying to learn the ropes.
Thanks for all the great help. I appreciate it!
Your battery should normally give you about 5 hours of screen time (moderate to heavy usage). Any less then you should consider checking for wakelock issues with an app called betterbatterystats. Use the search to find it.
Battery boosters will generally do more harm than good, but I've found juice Defender helpful in toggling my wifi, data, and blue tooth to save me some battery life.
I used this root method:
http://galaxys3root.com/galaxy-s3-root/how-to-root-att-galaxy-s3-sgh-i747
As for roms, you should research the difference between AOSP and AOKP roms and go on from there. Look for beginner tips before you root/flash a ROM such as how to make a backup because no one is responsible for what happens to your phone.
Sent from my GT-P3110 using Tapatalk 4 Beta
Do not use galaxys3root.com
Follow the link in my signature to safely root, backup and install a custom ROM. Read up on the processes and procedures first to feel more comfortable. There's some material in the general section.
TouchWiz-based roms can be found in the Android development section. AOSP-based roms are in the Original Android Development section
Cheers
Domoo said:
Your battery should normally give you about 5 hours of screen time (moderate to heavy usage). Any less then you should consider checking for wakelock issues with an app called betterbatterystats. Use the search to find it.
Battery boosters will generally do more harm than good, but I've found juice Defender helpful in toggling my wifi, data, and blue tooth to save me some battery life.
I used this root method:
http://galaxys3root.com/galaxy-s3-root/how-to-root-att-galaxy-s3-sgh-i747
As for roms, you should research the difference between AOSP and AOKP roms and go on from there. Look for beginner tips before you root/flash a ROM such as how to make a backup because no one is responsible for what happens to your phone.
Sent from my GT-P3110 using Tapatalk 4 Beta
Click to expand...
Click to collapse
OK, I thank you for the help. Now, I am ready to root, but two questions: I have Windows 8, the drivers for my phone do not seem to work. I tried compadibliity, installing Kies, etc. No-go. Also, how do I go about knowing if a ROM is compatible? Is there certain serial numbers I need to be attentive too? Or just look for GS3?
xBeerdroiDx said:
Do not use galaxys3root.com
Follow the link in my signature to safely root, backup and install a custom ROM. Read up on the processes and procedures first to feel more comfortable. There's some material in the general section.
TouchWiz-based roms can be found in the Android development section. AOSP-based roms are in the Original Android Development section
Cheers
Click to expand...
Click to collapse
wwe9112 said:
OK, I thank you for the help. Now, I am ready to root, but two questions: I have Windows 8, the drivers for my phone do not seem to work. I tried compadibliity, installing Kies, etc. No-go. Also, how do I go about knowing if a ROM is compatible? Is there certain serial numbers I need to be attentive too? Or just look for GS3?
Click to expand...
Click to collapse
TO the windows 8 thing I can't help you. As far as rom's go, and thing in this specific device forum is fine to flash and NEVER flash anything for the i9300 galaxy S3
hednik said:
TO the windows 8 thing I can't help you. As far as rom's go, and thing in this specific device forum is fine to flash and NEVER flash anything for the i9300 galaxy S3
Click to expand...
Click to collapse
I managed to get it worked out by turning off debugging to put the zip on the sd card then turning it on to do the root. It worked. I put SlimBean on it. Not sure of any other stable ones out there . I have the 747 or something like that. I forget. I have it off charging up .
wwe9112 said:
I managed to get it worked out by turning off debugging to put the zip on the sd card then turning it on to do the root. It worked. I put SlimBean on it. Not sure of any other stable ones out there . I have the 747 or something like that. I forget. I have it off charging up .
Click to expand...
Click to collapse
Task's AOKP is stable as are a few other in the original development section. I'd say almost all of the ones based on stock firmwares are stable as well.

[APP] [ROOT] Fast Charge for Archos (ArchosFastCharge)

This is a quick hack app I created to get something like fast charge on my tablet.
I tested it on Quallenauge's [ROM] [4.3.1] CyanogenMod 10.2.
!!! I don't know if it works on any other ROM !!! (Don't expect any updates unless I need it too)
Of course it required ROOT.
USE AT YOUR OWN RISK. MIGHT DESTROY SOME USB PORTS.
You need to activate it every time you plugin a usb cable.
jojojoris said:
This is a quick hack app I created to get something like fast charge on my tablet.
I tested it on Quallenauge's [ROM] [4.3.1] CyanogenMod 10.2.
!!! I don't know if it works on any other ROM !!! (Don't expect any updates unless I need it too)
Of course it required ROOT.
USE AT YOUR OWN RISK. MIGHT DESTROY SOME USB PORTS.
You need to activate it every time you plugin a usb cable.
Click to expand...
Click to collapse
What about new CM 11?
Macaronibox said:
What about new CM 11?
Click to expand...
Click to collapse
I don' t know. It might work.
I also don't think there will ever be an update since I completely destroyed my tabled last week.
jojojoris said:
I don' t know. It might work.
I also don't think there will ever be an update since I completely destroyed my tabled last week.
Click to expand...
Click to collapse
Please, continue your tool. I will test on my tablet and say if it works or not
Many people with this tablet have this slow charging issue. (I too, because my original charger has disappeared... I am using a wall charger with 3A, but the tablet keep displaying "Slow charging"...)
Please continue :good:
Thanks
EDIT: I have a Archos 101 g9
EDITIT: I also am a developer, If you PM me, I can continue the development of your App for you

[Q&A] Gaming Dragon Rom V5

Q&A for Gaming Dragon Rom V5
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
which is better the nolekat rom or this rom?
I was just wondering which is better nolekat rom or this rom. im wondering this because I don't know if I should install this one. the nolekat rom is better than stock but is this even more better?
hello
snakeboy1011 said:
I was just wondering which is better nolekat rom or this rom. im wondering this because I don't know if I should install this one. the nolekat rom is better than stock but is this even more better?
Click to expand...
Click to collapse
OK now that is something for you to try out cause I don't know if his is better
And imvnot just gonna say oh yeah mine rocks because in others opions it might not
So, I switched from dark to normal theme and I can read the quick settings again, but my main problem is now that I reflashed v6, im not able to watch any videos. I'm using burning series which gets links from streamcloud. It worked fine till I reflashed v6. Does annoy know why this could be? I tried with es video player and the stock one as well as in Chrome. Nothing.
hello
catbro said:
So, I switched from dark to normal theme and I can read the quick settings again, but my main problem is now that I reflashed v6, im not able to watch any videos. I'm using burning series which gets links from streamcloud. It worked fine till I reflashed v6. Does annoy know why this could be? I tried with es video player and the stock one as well as in Chrome. Nothing.
Click to expand...
Click to collapse
hello thanks for feed back if you could give me a link to the app being used or link at all i will see whats going on and il try reflashing it again to see if it makes a difference thanks
Hi,
First of all thanks for the great work. I switched from the seal ROM to yours, and I have to say your ROM flies so far, keep up the great work.
Second I do have one issue with this ROM. I use tasker to power off my tablet, since it dies if I drain the battery complete. To do that I just use the reboot command as shellscript "reboot -p". That doesn't do anything. I took a look at my logs and found this error "03:21:11.237 ActivityManager(27125)
Permission Denial: get/set setting for user asks to run as user -2 but is calling from user 0; this requires android.permission.INTERACT_ACROSS_USERS_FULL"
Seems to me like a doable fix, but I know just a tiny bid of programming. Would love to help any way I can.
hello
kickurd said:
Hi,
First of all thanks for the great work. I switched from the seal ROM to yours, and I have to say your ROM flies so far, keep up the great work.
Second I do have one issue with this ROM. I use tasker to power off my tablet, since it dies if I drain the battery complete. To do that I just use the reboot command as shellscript "reboot -p". That doesn't do anything. I took a look at my logs and found this error "03:21:11.237 ActivityManager(27125)
Permission Denial: get/set setting for user asks to run as user -2 but is calling from user 0; this requires android.permission.INTERACT_ACROSS_USERS_FULL"
Seems to me like a doable fix, but I know just a tiny bid of programming. Would love to help any way I can.
Click to expand...
Click to collapse
Hello thanks for your feedback I will get to see what's going on with it thanks
google calender not syncing
Hi dsilx,
just for your information - google sync isnt working properly here. It constantly says sync error. This means my calender is not updated. My contact are however.
And i just want to give props again.. dont know what u mean with laggy in ur post on the regular thread, but my tab is flying. Fastest rom i ever tried! So whatever your doing: keep up the good work!
Problem downloading
Anyone else having problems downloading?
hello
xX_Lost said:
Anyone else having problems downloading?
Click to expand...
Click to collapse
New link is up and working just downloaded it
Nicely Done
I hope this is being posted in the correct place. On my SM-T210R this rom performs very smooth. Flashing it was in and out of recovery done. I've flashed a many a rom and have never posted a comment. Until today. Appreciate your work.
power off charge FAIL..
?
colby87 said:
power off charge FAIL..
Click to expand...
Click to collapse
hello thanks but what you mean that im aware of it charges perfect while off
excuse me if im not understanding you right
HI.
Work this rom with samsung T210? (not "R").
Cool gonne try it on next update
Sent from my SM-T210R using xda premium?
Sandisk USB Dual USB Drive
My wife bought me a Sandisk USB Dual Drive and I want to use it with my tablet however it is not reading/detecting the device. I have been searching online but can't find a clear answer about this issue. From what I read, the SM-T210r has the hardware to read OTG drives but requires a proper kernel to allow this feature to work. Does anyone know a way for my tablet to read the dual drive?

custom rom or timur? in car.

Delete. Found my answer.
butwhydoitalk2u said:
Delete. Found my answer.
Click to expand...
Click to collapse
What was your solution?
I am also looking for a car based rom but don't want to pay to get timur's
I bought into the timurs but when I tried to go back to stock - I cleared the rom and wiped the tablet to go to stock- I wiped everything and bricked the tablet. My computer didnt recognize the tablet in bootloader or twrp mode...Oh well. I am waiting for my other tablet to arrive to see if I can finally do it. As far as the question"...to timur or not to timur?" I couldn't tell you but the biggest complaint that I see while using the experimentalx is the recognition of the dac Which in my application makes the world of difference since everything is going to go through the dac - as far as audio. Another cool feature is its ability to recognize the reverse input through my camera. It switches to your backup camera app once the kernel detects power on the camera. Again, I have yet to test ANY of it out. Sorry I couldnt help anymore. it really all depends on what features you are looking for. Just as a comparision, I am gonna run the following: dac, 2 hubs, fm, back up cam, extra usb extension, flash drive for music, flash drive for video, and mic. Still trying to see if I can find a usb fan that is controllable via an app If it plugged into one of the hubs. Good luck...let me know what works for you.
Let's hope someone could share the Timur Kernel.
He said with his words that it is completely legit to share his source and kernel. He was just not willing to do it.
As the nexus is getting old. People who would like to donate has already done.
BTW, can you please share if you can get OTG & Charge to work together under elementalX without having to re-plug the mini-usb everytime?
Thanks.
There is a torrent for the 2012 version:
https://thepiratebay.se/torrent/11774515/Timur_acute_s_USBROM_and_Kernels_for_Nexus_7_2012
Hoka-Hey said:
There is a torrent for the 2012 version:
https://thepiratebay.se/torrent/11774515/Timur_acute_s_USBROM_and_Kernels_for_Nexus_7_2012
Click to expand...
Click to collapse
Wait that's for 2012 nexus though thought it was 2013 flo edition... Close call
@ butwhydoitalk2u: can you please share the Timur USB rom and kernel with us so we can experiment too?

Categories

Resources