I think I´m still a few posts shy of the 10 post magic limit. So I will post it here instead of the developer thread.
As I´m still very much a noob concerning android ROMS, kernels etc, I have a question regarding installation of this ROM.
More specific this line in the installation instructions:
4.Restore my CWM backup > restore system & data for Supercharger V6 optimisations full effect (don't worry, CWM backup is made after a clean restore, so data is clean except Supercharger V6 files)
What I did was reboot into recovery -> "backup and restore" -> "restore" -> choose Milan's .587 v2.1 backup.
Do I need to take additional steps to get it Supercharged?
How can I tell if its supercharged?
Run the SuperCharger script.
Sent from my CM9'd Arc
XperienceD said:
Run the SuperCharger script.
Sent from my CM9'd Arc
Click to expand...
Click to collapse
Thanks
However now we are venturing into uncharted territory for me.
According to this guide: http://forum.xda-developers.com/showthread.php?t=1334834&highlight=install+supercharge
I need to install Script Manager and run the script. Is that correct?
If it is, the problem is the Supercharged script is not placed in the root of my SD card, as the guide descripes.
If anybody who have Supercharged enabled on Milan's .587 v2.1 could post a step by step guide, I would greatly appreciate it.
Anybody?
I would very much like to Supercharge this ROM.
The only guide I can find is the above mentioned and I´m not really sure it applies to Milan's .587 v2.1.
If you do a restore in CWM it restores both the system and data parts and will already be supercharged. I checked mine by running the supercharger script and it said 100% supercharged.
Sent from my LT18i using Tapatalk 2
Thank you
I have no clue to how Supercharger works.
So just for future reference, how did you check it?
I guess you use Script Manager. But do I need to import the script to run it or is it already placed on the phone since it is Supercharged?
Silentbob78 said:
Thank you
I have no clue to how Supercharger works.
Click to expand...
Click to collapse
Well you've posted a link to ONE of the threads explaining how to install it, so you need to show some initiative, and if you had could have this figured out already.
XperienceD said:
Well you've posted a link to ONE of the threads explaining how to install it, so you need to show some initiative, and if you had could have this figured out already.
Click to expand...
Click to collapse
Thank you for being a jerk about it.
I posted a link to guide showing how to install it. It seems it is already installed on my phone. So with my minimal knowledge of android phones, it seemed to me that it was an entirely different situation. That is why I asked.
If I had the time, I would not even have posted in the Q & A section in the first place. I would have figured it out by myself. As I prefer to do it on my own. However, as my time is very limited, I thought my problem fitted the criteria of the Q & A section. Compared to a lot of the other posts, I don´t think my request is especially outrageous.
However you seem to think I´m asking for to much. Why I have no idea. Maybe you just like being an elitist jerk. Nobody forced you to answer. If you thought me being to demanding, you could just have ignored my post.
I will withdraw my question and leave the Q & A to more apparently suited questions.
Silentbob78 said:
Thank you for being a jerk about it.
Click to expand...
Click to collapse
YAWN.
http://forum.xda-developers.com/showthread.php?t=1045941
Related
Not sure as this belongs here or not, but I think this is the best place for it. This will allow you to add init.d to your phone without CWM. I got it working for me, so I hope everyone else will have the same fortune.
Requirements:
1.Root
2.Fully installed Busybox
3. Windows computer
Instructiions:
Download and run runme.bat
Credits:
keunhuvac - http://forum.xda-developers.com/showthread.php?t=1577545
Added the CWM version to the OP - Quick instructions:
Put on your SD card or somewhere you can find on your phone and flash with CWM - done!
Files from his forum - Xperia S - has been edited to remove errors
Please note this will fail if any of the Busybox symlinks are not complete!
popfan said:
Not sure as this belongs here or not, but I think this is the best place for it. This will allow you to add init.d to your phone without CWM. I got it working for me, so I hope everyone else will have the same fortune.
Requirements:
1.Root
2.Fully installed Busybox
3. Windows computer
Instructiions:
Download and run runme.bat
Credits:
keunhuvac - http://forum.xda-developers.com/showthread.php?t=1577545
Files from his forum - Xperia S - has been edited to remove errors
Please note this will fail if any of the Busybox symlinks are not complete!
Click to expand...
Click to collapse
I am not sure it works.
1. the 06dalvik script did not create /cache/dalvik-cache folder.
2. the 99test did not create any file in /data/local/tmp.
does our kernel support init.d?
ganeshbiyer said:
I am not sure it works.
1. the 06dalvik script did not create /cache/dalvik-cache folder.
2. the 99test did not create any file in /data/local/tmp.
does our kernel support init.d?
Click to expand...
Click to collapse
Mine is working, if you got some errors during the load process, I need to know.
If thing to do is check your symlinks and make sure that they are all there for busybox.
Use this to check your symlinks:https://play.google.com/store/apps/...t=W251bGwsMSwyLDEsInN0ZXJpY3Nvbi5idXN5Ym94Il0.
If any one is missing, it could stop the install process.
On the thing about our kernel supporting init.d, the answer is not currently and that is why we have to use this program. It will allow compatibility with our kernel to have init.d.
The busbox is ok.
I can run it rom my terminal on the phone as well as adb shell.
There were no errors during installation.
Edit:
I ran the script again today.
The init.d works. the 99test did create a file in /data/local/tmp.
INIT.D installed. Excellent! Now to look up some tweaks. You da man Popfan.
Here are some
http://forum.xda-developers.com/showthread.php?t=1709836
ganeshbiyer said:
Here are some
http://forum.xda-developers.com/showthread.php?t=1709836
Click to expand...
Click to collapse
Yup, that's the thread I've been reading through.
jeriku said:
Yup, that's the thread I've been reading through.
Click to expand...
Click to collapse
Post the updated build.prop and init.d scripts, when you are done verifying.
jeriku said:
INIT.D installed. Excellent! Now to look up some tweaks. You da man Popfan.
Click to expand...
Click to collapse
Thanks for the feedback. I was starting to wonder if anyone knew what this can do for their phone.
Here is another good site:
http://forum.xda-developers.com/showthread.php?t=991276
A lot of good stuff. I am going to see if I can get the tweaks to run at 100%, here in a few days. I loved it when I ran this on my cappy.
popfan said:
Thanks for the feedback. I was starting to wonder if anyone knew what this can do for their phone.
Here is another good site:
http://forum.xda-developers.com/showthread.php?t=991276
A lot of good stuff. I am going to see if I can get the tweaks to run at 100%, here in a few days. I loved it when I ran this on my cappy.
Click to expand...
Click to collapse
I'll be looking forward to hear how this goes. I was just reading over the thread and I want it.
Sent from Rooted LT28at with ICS.
jeriku said:
I'll be looking forward to hear how this goes. I was just reading over the thread and I want it.
Sent from Rooted LT28at with ICS.
Click to expand...
Click to collapse
Running it at 50% is pretty good also. The script will at least zipalign, check for proper permissions on all apps, clean the delvik-cache, and reorganize the task manager priorities and also your ram manager settings. You should try the battery calibration script that is there also, it is really nice.
popfan said:
Running it at 50% is pretty good also. The script will at least zipalign, check for proper permissions on all apps, clean the delvik-cache, and reorganize the task manager priorities and also your ram manager settings. You should try the battery calibration script that is there also, it is really nice.
Click to expand...
Click to collapse
I'm going to read it through a couple times then give it a go. Did you use script manager or just terminal?
Sent from Rooted LT28at with ICS.
jeriku said:
I'm going to read it through a couple times then give it a go. Did you use script manager or just terminal?
Sent from Rooted LT28at with ICS.
Click to expand...
Click to collapse
Script manager is easiest. Don't forget to use as root for all those scripts.
I did forget that it will also allow for a powershift, so you can change your settings on the fly if you need more multitasking capabilities than power savings or more power.
If you get v6 working please post any differences you notice. esp launcher re-draws. <that to me is one of the most annoying things ever. and would love to know that there is something that can be done about it
killerskincanoe said:
If you get v6 working please post any differences you notice. esp launcher re-draws. <that to me is one of the most annoying things ever. and would love to know that there is something that can be done about it
Click to expand...
Click to collapse
It looks like it is going to be a little tricky, but at 50% I can tell the Xperia Launcher is working better and almost never see any lag. With Nova Launcher, it just flies.
That's awesome news. What exactly do you mean by 50%... The CPU? Or what?
Sent from my HTC Flyer P510e using xda app-developers app
killerskincanoe said:
That's awesome news. What exactly do you mean by 50%... The CPU? Or what?
Sent from my HTC Flyer P510e using xda app-developers app
Click to expand...
Click to collapse
It reads like there are extra manual steps to get ICS fully super charged.
Sent from Rooted LT28at with ICS.
It does not look like the latest CWM that I put will be compatible with the extra mods, after I put the cwm together and flashed it bricked my phone. I have put my phone back to where it was before the modifications for the ICS supercharger (the service.jar and service.odex modded part) and works just fine without the additional mods, but I don't think I am going to try to mod the phone again (wife will get mad at me if I hard brick my phone).
How can I use this tweak?
well i don't personally use it, but it might be a good idea to do some research.
If you are talking about the supercharger script...there is a whole thread dedicated by the developer.
Its is not a simple click and profit situation. Do some research and give it a shot on your phone.
sjpritch25 said:
well i don't personally use it, but it might be a good idea to do some research.
Click to expand...
Click to collapse
ask nicely and i'll give you the link. Google is your friend though.
sjpritch25 said:
ask nicely and i'll give you the link. Google is your friend though.
Click to expand...
Click to collapse
Dude ffs you sound like "get on your knees and beg me for kindly giving you the link". For real? C'mon...
/edit Or maybe you are trying to get more posts?... Who knows?
Tapped with Xperia Play running AOKP 4.0.4 Milestone 6
olokos said:
Dude ffs you sound like "get on your knees and beg me for kindly giving you the link". For real? C'mon...
/edit Or maybe you are trying to get more posts?... Who knows?
Tapped with Xperia Play running AOKP 4.0.4 Milestone 6
Click to expand...
Click to collapse
I dont know if perhaps that post came off as condescending...but what is odd to me is that the OP asked about V6 tweak, and clearly has some limited knowledge about it, but chose to not read about it and instead wrote a one line post in a completely different forum.
OP should really do a quick xda search - so this way instead of pasting links for others we can test software and help debug/develop it - and maybe learn a new thing or two.
tincbtrar said:
If you are talking about the supercharger script...there is a whole thread dedicated by the developer.
Its is not a simple click and profit situation. Do some research and give it a shot on your phone.
Click to expand...
Click to collapse
That right! I've read all pages and I don't know anythings
langaking said:
That right! I've read all pages and I don't know anythings
Click to expand...
Click to collapse
Then do yourself a favor.... Go back to stock, relock your bootloader and don't look back. If you've read the thread you would need to ask about it here. The first couple posts tell you everything and no one can answer your questions about it better than the dev. Yes, it will work with any android device. Some platforms have different things that need to be done than others (last I looked at it at least) and there are instructions and links for everything in the first few posts.
Sent from Kangdemnation
WTF?
Are you talking about Andy's tweaks for Sense 3.6 ROMs?
I think this is for v6 supercharger
I've been using the v6 supercharger script on the gb energyrom for the past week or so. I've noticed a big difference...
Sent from my ADR6350 using xda premium
Jizzylax said:
WTF?
Are you talking about Andy's tweaks for Sense 3.6 ROMs?
Click to expand...
Click to collapse
no, it's a init.d script..
langaking said:
How can I use this tweak?
Click to expand...
Click to collapse
I've used it a bit. Here are the full steps to get it to work.
1. Find the thread that the dev created for it.
2. Read the instructions there.
3. Download the required files and apps.
4. Follow the instructions that you read in step 2.
Sent from my ICS Dinc2
*Edit* Come to think of it those are the instructions that I use for just about everything I find on XDA.
I've used the supercharger script on the aeroevan's unofficial CM9 rom and macrodroid's ArcticICSed rom with no issues.
Warning....., if you installed the AndyBones tweaks for the Arctic rom (or Tazz's 3.6 ICS) and then run the Supercharger script, you will end up with a blank wallpaper and a reflash is needed to fix it. The Supercharger script will modify your build.prop and init.d scripts (plus install a S99 script) will may conflict with the tweaks program (the Rosie tweaks in the tweaks program include modded winfree values which may be the cause of the conflict).
I hate bringing up an old topic but didn't want to clutter with a new post I'm running aeroeven cm10 does the v6 improve it much I've been reading the main thread and it seems like a lot of mixed emotions on it my thing is the rom I'm running is really smooth and only gets laggy when too many tasks are running a simple task killer fixes it so my question is what do you guys think of it is it worth it or not and is there any draw backs and what addons are you running with it as I saw a lot of options with it I would normally just go for it without asking but with all the options and my current schedule I don't have time to really test everything out
Sent from my Incredible 2 using xda app-developers app
Has anyone used V6 SuperCharger with TSM UKB II 1.3.1 with success?
I know one of the files were patched to work with it, but couldn't find any word of users using it within the OP.
"service.jar patched for v6 supercharger"
(i would have posted in the OP thread, but I don't have permission )
Can someone chime in that has used V6SC with the ROM in question?
Better yet... give me a "howto" for implementing it?
The V6 SuperCharger thread is pretty confusing for newcomers to that concept.
(note: I am not new to flashing and tweaking ROM's... been doing it for years :angel: )
Thanks in advance!
CalvinAMi said:
Has anyone used V6 SuperCharger with TSM UKB II 1.3.1 with success?
I know one of the files were patched to work with it, but couldn't find any word of users using it within the OP.
"service.jar patched for v6 supercharger"
(i would have posted in the OP thread, but I don't have permission )
Can someone chime in that has used V6SC with the ROM in question?
Better yet... give me a "howto" for implementing it?
The V6 SuperCharger thread is pretty confusing for newcomers to that concept.
(note: I am not new to flashing and tweaking ROM's... been doing it for years :angel: )
Thanks in advance!
Click to expand...
Click to collapse
Yes, it works. Just download the script and run it with Su using script manager (or if u want to go old school, use terminal)
Sent from viperDIX B4
Ok, I really should contribute to the community somehow So I decided to fix any little problem in my rom i'm currently using and release it, so people like me, that means people who like clean and tidy ROMs with some extra horsepower under the hood and few tweaks that increases usefulness of their device a bit will have their life a little bit easier because I'll try to implement as much awesomeness without unnecessary bloatware to this ROM and learn a bit about modding in the process
And I proudly present you PowerXperia ROM for Xperia S
It's based on official .45 ROM, with following changes:
StatusBar toggles
Percentage battery mod
^ these two were one mod, p3001ee's statusbarmod with quickpanelsettings.
krabappel2548's XperiaSSpeed Kernel V6 with stock bootlogo and "Xperia" background in recovery
serajr's xperia s customizable home launcher
ROM is debloated and some handy apps are included
Click to expand...
Click to collapse
Known issues & TODO:
- When lockscreen disabled and waking up phone with camera button, blank form appear that is canceled by any action. This is caused by Camera app.
- AROMA installer - honestly, i am aware that apps I use aren't apps that everyone want to use
Click to expand...
Click to collapse
Feel free to post suggestions/critic/bug reports/giving thanks etc.
Feel free to mirror, just let me know, ok?
DISCLAIMER: I am not responsible for any damage caused to your phone. You are using this at your own risk, and if you are not willing to take it, do not proceed. Please read carefully all the information below, It's wise to prevent problems...
Installation process:
This is currently standard recovery flashable ZIP file. If you do not have access to recovery you may want to read this thread: http://forum.xda-developers.com/showthread.php?t=1793272 there are several ways how to boot into recovery, you may use any method, the recovery will be reflashed anyway. This rom also requires unlocked bootloader.
1) Place installation package anywhere on your internal card.
2) Boot into recovery (usually with pressing vol up button when prompted by kernel)
3) Select install zip from sdcard.
4) Select choose zip from sdcard
5) Find installation package on SD Card and confirm installation
6) Wait until updater finishes his job and wipe cache partition or (optional) perform hard reset.
7) Profit
Click to expand...
Click to collapse
First boot takes a lil bit longer, don't be scared
DOWNLOAD:
Uloz.to
uploaded.to
(will add some more mirrors soon)
reserved
ladynaamah said:
Ok, I really should contribute to the community somehow So I decided to fix any little problem in my rom i'm currently using and release it, so people like me, that means people who like clean and tidy ROMs with some extra horsepower under the hood and few tweaks that increases usefulness of their device a bit will have their life a little bit easier because I'll try to implement as much awesomeness without unnecessary bloatware to this ROM and learn a bit about modding in the process
And I proudly present you PowerXperia ROM for Xperia S
It's based on official .45 ROM, with following changes:
Known issues & TODO:
Feel free to post suggestions/critic/bug reports/giving thanks etc.
Feel free to mirror, just let me know, ok?
DISCLAIMER: I am not responsible for any damage caused to your phone. You are using this at your own risk, and if you are not willing to take it, do not proceed. Please read carefully all the information below, It's wise to prevent problems...
Installation process:
First boot takes a lil bit longer, don't be scared
DOWNLOAD:
Uploading in progress... stay tuned
Click to expand...
Click to collapse
Good to have another rom... But this is more like a combination of some mods that you have done on your stock rom with krabe's kernel and made it a power rom...
Anyways one new rom for us.. Cheers
Edit : you already told these in the beginning.. My bad
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
exciting stuff!! Btw, is it overclocked by default??
Harsh7689: The point of this ROM is to ease the effort patching it up to others with similar requirements from their device. I've not said that I have done something special, I don't know java and I know very little from bash and other scripting... only thing I've learned up to today is to find a mod, test it and if it works well use it until i find better. This is my little I can do for the community... Maybe I'll learn from this baby-in-sandbox project something that will allow me to do a bit more for community than this... I agree, it's nothing much fancy, but it might help someone, that's why I posted it here.
imrock: It's kernel is krabappel2548's XperiaSSpeed Kernel V6, so yes, it is overclocked by default and can be overclocked up to 1899 MHz, which me personally finds quite hazardous Anyway default overclock is somewhere around 1,7 GHz which is safe value The package also contains Voltage Control free edition, which will allow you to alter those values to your taste
ladynaamah said:
Harsh7689: The point of this ROM is to ease the effort patching it up to others with similar requirements from their device. I've not said that I have done something special, I don't know java and I know very little from bash and other scripting... only thing I've learned up to today is to find a mod, test it and if it works well use it until i find better. This is my little I can do for the community... Maybe I'll learn from this baby-in-sandbox project something that will allow me to do a bit more for community than this... I agree, it's nothing much fancy, but it might help someone, that's why I posted it here.
imrock: It's kernel is krabappel2548's XperiaSSpeed Kernel V6, so yes, it is overclocked by default and can be overclocked up to 1899 MHz, which me personally finds quite hazardous Anyway default overclock is somewhere around 1,7 GHz which is safe value The package also contains Voltage Control free edition, which will allow you to alter those values to your taste
Click to expand...
Click to collapse
Truly said +1
I know this that's why I thanked you first thank of the rom
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
Glad you agree uploaded.to mirror nearly ready. Will add it to first post By the way, thanks for thanks
after desperate messing with aroma installer i have another idea how to contribute to community tool that generates aroma scripts
What is the difference between this "ROM"and the other ones like Eratcher and DualCore "ROMS"
It is supposed to be as much stock as possible, while getting some extra functionality, to be honest, i'm not keen using AOSP - themed rom, if i would want to, i'd bought galaxy nexus... i've bought xperia cause i like it's design... by the way, being arrogant and rude is not the best way how to support someone trying to learn something...
Could you send me the kernel only, if possible?
Sent from my LT26i with Tapatalk 2
Felimenta97 said:
Could you send me the kernel only, if possible?
Sent from my LT26i with Tapatalk 2
Click to expand...
Click to collapse
Try the search function...you will also see the kernel dev does not want people mirroring his work...
http://forum.xda-developers.com/showthread.php?t=1761778
Sent from my Xperia S using Tapatalk 2
geekygrl said:
Try the search function...you will also see the kernel dev does not want people mirroring his work...
http://forum.xda-developers.com/showthread.php?t=1761778
Sent from my Xperia S using Tapatalk 2
Click to expand...
Click to collapse
i think he(Felimenta97) is asking for the kernel because ladynaamah has the ka kernel with default sony logo.
You may extract zImage file from archive and flash it via fastboot using command
Code:
fastboot flash boot zImage
provided you have connected your device in fastboot mode
geekygrl: I'm aware of that, but what shall i do? Type here guide how to extract it, modify it, repack it and flash it separately? That's not making much sense, would excessively complicate process that is supposed to be simple...
mharckk said:
i think he(Felimenta97) is asking for the kernel because ladynaamah has the ka kernel with default sony logo.
Click to expand...
Click to collapse
Yeah, exactly. Im using SSpeed v6 right now, but those small customizations seems nice.
ladynaamah said:
You may extract zImage file from archive and flash it via fastboot using command
Code:
fastboot flash boot zImage
provided you have connected your device in fastboot mode
geekygrl: I'm aware of that, but what shall i do? Type here guide how to extract it, modify it, repack it and flash it separately? That's not making much sense, would excessively complicate process that is supposed to be simple...
Click to expand...
Click to collapse
Thanks. I asked for it only as I didn't wanted to download the entire Rom, but I will do it. Thanks
Sent from my LT26i with Tapatalk 2
sorry i can't be of more help currently, I'm at the work right now
Does anyone have the same problem ?
Icon position seems wrong
KennyCHF said:
Does anyone have the same problem ?
Icon position seems wrong
Click to expand...
Click to collapse
Lol funny screen
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
KennyCHF: It appears on my device too, I'll look into it...
ladynaamah said:
KennyCHF: It appears on my device too, I'll look into it...
Click to expand...
Click to collapse
Thanks ~ wait for your good news ~~~
This thread is meant for people with questions regarding my Kitkat ROM.
Why did I create this thread?
I want to keep my Development thread clean.
What can I ask/post about?
Almost anything, as long as it is related to me or the ROM.
Some examples;
"Does INT2EXT work with this rom?"
"Does supercharger work with this rom?"
"Where are you from?"
And so on...
Feel free to help each other out! And please, stop posting about this in the development thread.
Well I now feel officially obliged to apologize for ****ting in your development thread.
ToastnButter said:
Well I now feel officially obliged to apologize for ****ting in your development thread.
Click to expand...
Click to collapse
No worries mate, this thread was just created. I've been meaning to do this thread for a while now
Nice idea, thanks
Here's my problem: GTalk crashes when people call me (voice chat).
"Does supercharger work with this rom?"
Is this thing stable enough to use for space diving?
via xda app
Good idea starting this thread. So here's my first question :
Does Netflix app work for you w this rom (latest version)?
For me it instantly shuts down when I start the app.
Skickat från min HTC Desire via Tapatalk 2
tad_gr said:
"Does supercharger work with this rom?"
Click to expand...
Click to collapse
I had it installed on P11. You have to patch services.jar (there's a windows tool to do it for you here).
I had a lot of freezing problems before and after installing it. They weren't the same after I installed it; not necessarily better, just different. I have no way of knowing if it was supercharger or an app or some sort of interaction between two or more things.
I'm on 3.1.0p1 now and I have no intention of using supercharger because my Desire is more responsive and better at multitasking now than it ever was on Gingerbread with supercharger.
sorry to ask what exactly is/does supercharger?
phanmo said:
I had it installed on P11. You have to patch services.jar (there's a windows tool to do it for you here).
I had a lot of freezing problems before and after installing it. They weren't the same after I installed it; not necessarily better, just different. I have no way of knowing if it was supercharger or an app or some sort of interaction between two or more things.
I'm on 3.1.0p1 now and I have no intention of using supercharger because my Desire is more responsive and better at multitasking now than it ever was on Gingerbread with supercharger.
Click to expand...
Click to collapse
I tried supercharger to jb/cm10 and I had no problem at all I believe the same would be for p1 but at the moment I run without supercharge and looks that the rom doesnt need it.
kmetek said:
sorry to ask what exactly is/does supercharger?
Click to expand...
Click to collapse
SuperCharger = Speed + Multitasking
Supercharger info: http://forum.xda-developers.com/show...4#post16635544
Maximum Overdrive, 3G, Kernel info: http://forum.xda-developers.com/show...postcount=5021
:good:
stankyou said:
Is this thing stable enough to use for space diving?
via xda app
Click to expand...
Click to collapse
Well, yeah lol. You can video record!111111111111111111111
Tuborg68 said:
Good idea starting this thread. So here's my first question :
Does Netflix app work for you w this rom (latest version)?
For me it instantly shuts down when I start the app.
Skickat från min HTC Desire via Tapatalk 2
Click to expand...
Click to collapse
I can't say, I don't use my desire. But.. If someone else here were to install Netflix (No need to login, just try to start) that'd be great.
Get me a logcat and I'll see what I can do.
adb logcat -c <press enter>
adb logcat > netflix.txt <press enter> and start netflix. then upload it somewhere (like pastebin?)
I would ask for Aroma Installer with which we can be able to choose between different scripts (A2SD and INT2EXT) and misc.
And....what about trying Cyanogenmod settings to be able to customize even further?
Iryon said:
I would ask for Aroma Installer with which we can be able to choose between different scripts (A2SD and INT2EXT) and misc.
And....what about trying Cyanogenmod settings to be able to customize even further?
Click to expand...
Click to collapse
Using Aroma = more bugs. No thank you.
Well.. That's Cyanogenmod and not Evervolv.
Hi Nikez, Just curious, any reason you use a2sd and not other scripts (d2ext, int2ext etc)? Speed, stability? So people won't ask and try other alternatives as you as dev explain the benefit.
By any chance, did anyone try endomondo on the new p1 release? On p11 I had a problem that every time I tried viewing the map, the phone froze.. not sure if it was some issue with gapps. Anyone hit anything similar?
@nikez thanks for the awesome JB ROM. My Desire is still kicking along after nearly 2.5 years!
I have just installed the latest update 3.0.0p11, flashed the 4.1.2 version of google apps (gapps-jb-20121011-signed) and setup app2sd.
When I view the available space using Titanium Backup I only have 36.8kB free in System Rom partition. Is that normal on stock Hboot?
Also, I installed the latest Google Calendar update from the Play Store. I now have two calendar apps installed. Has anyone else tried this yet? Do I need to remove the other one from /system?
I would like to thank you deeply for this amazing ROM. I've been searching a perfect rom for a long time, but I think I am very close to end my search now while using your ROM. Very fast, very versatile, almost stock ROM. I love simplicity and this is absolutely perfect.
The only problem I had was a problem with camera - I know this is an annoying issue with many ROMs and it's probably not very well made in the Android itself. Do you think it will get better? I understand that it probably does not depend on you, but I believe this is the last thing that is truly missing to your ROM. (But I am no power user, just a casual user).
And again, thank you for (imho) the best Jelly Bean ROM available here, and I am seriously considering a donation. Keep up the good work!
Have anyone here got flash player working good on all webbtv sites with this ROM?
Sent from my HTC Desire using xda app-developers app
henrikht said:
Have anyone here got flash player working good on all webbtv sites with this ROM?
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
Try install flash for jelly bean from Pimp My Rom. Search here in xda.
Hey guys, does anyone have an idea how to get bluetooth-tether working? With p11 i got it randomly working by playing with settings in pimp my rom, but i can't remember.
Sent from my Nexus 7 using xda app-developers app
Hi, i have some questions, i couldn't find much in forum.
-Can init.d is used in ICS 4.0.4 (fw.50) with this guide? http://forum.xda-developers.com/showthread.php?t=1547238
-How to use Zipalign at every boot?
-v6 supergharger is useful?
- Could you give me some explanation o guides?
Ty very much every body and sorry for my English.
ps: a little guide to create a Rom?
stibuz95 said:
Hi, i have some questions, i couldn't find much in forum.
-Can init.d is used in ICS 4.0.4 (fw.50) with this guide? http://forum.xda-developers.com/showthread.php?t=1547238
-How to use Zipalign at every boot?
-v6 supergharger is useful?
- Could you give me some explanation o guides?
Ty very much every body and sorry for my English.
ps: a little guide to create a Rom?
Click to expand...
Click to collapse
Why do you need to zip align every time.Need to zipalign an app only once.
anyways here is the script.
Unzip it and copy it to /system/etc/init.d and give it executable permissions. Look at the permissions of the other script and make this one the same.
For V6 supercharge ... look into the V6 supercharg post for guide.
There are lots of ROM creating Guides. Just search in XDA forums and you will get plenty.
What you dont understand is that its not so simple to follow a guide to make your own rom, because then its not really yours. Start off with getting someones else's rom and doing little mods to it. Just think: what would make the rom better? Say for example yopu might do some speed improvements, then maybe beats audio, then maybe some android 4.2 apps, etc. Once you have enough new things then you can make your own thread.
PS: googling stuff always helps
Just adding mods to a stock rom isnt really a new rom
w3nZ said:
Just adding mods to a stock rom isnt really a new rom
Click to expand...
Click to collapse
Then what are stock based roms? Look at UHD, sparta charge, x gamer, acroniam, jelly sandwhich. They're just stock that's been modded, tweaked and rooted.
But they´re still defferent to a stock rom with some mods of the modding section.
U cant pick 5 mods and call it a new custom rom.
Check out the ROM "cyano bean" its a entirely different ROM to cm10 yet look at my quote:
JackJoeR said:
Hi, this is a ROM heavily based on the work of FXP
I wanted to share the ROM I put together for my own personal use (so I didn't have to flash lots of individual things) and wanted to share it with the community, as it is a very fast ROM (no thanks to me)
So to start with I am no developer, I have not made any of the things included in this ROM apart from adding a few tweaks to the build.prop
I merely compiled lots of different things and put them into this in the hope people in the community will enjoy
Click to expand...
Click to collapse
ganeshbiyer said:
Why do you need to zip align every time.Need to zipalign an app only once.
anyways here is the script.
Unzip it and copy it to /system/etc/init.d and give it executable permissions. Look at the permissions of the other script and make this one the same.
For V6 supercharge ... look into the V6 supercharg post for guide.
There are lots of ROM creating Guides. Just search in XDA forums and you will get plenty.
Click to expand...
Click to collapse
Thanks for the zip align! Though doesn't it require a file in system -> bin?