Hi all, ..
I'm going to flash my first custom ROM on my One X but I want to ask some questions first ..
Before asking I'd like to tell you that ..
• My phone's CID is 1.29.708.15 (from Hong Kong)
• I know that we could flash any custom ROM even it wasn't based on the same CID
• I know that we couldn't downgrade the FW except when the phone is S-OFFed
1- Now if I flashed a ROM based on the latest Europe version (2.17.401.2) that means that my CID has changed and I could flash the latest stock RUU of Europe ??
2- If the answer of question 1 is NO then could I return back to my stock ROM even it's older than the custom ROM based on version ?? or my phone will brick ??
I want your help as soon as possible
And thanks to every one who had helped me before and thanks to that great forum
omar_bazaraa said:
Hi all, ..
I'm going to flash my first custom ROM on my One X but I want to ask some questions first ..
Before asking I'd like to tell you that ..
• My phone's CID is 1.29.708.15 (from Hong Kong)
• I know that we could flash any custom ROM even it wasn't based on the same CID
• I know that we couldn't downgrade the FW except when the phone is S-OFFed
1- Now if I flashed a ROM based on the latest Europe version (2.17.401.2) that means that my CID has changed and I could flash the latest stock RUU of Europe ??
2- If the answer of question 1 is NO then could I return back to my stock ROM even it's older than the custom ROM based on version ?? or my phone will brick ??
I want your help as soon as possible
And thanks to every one who had helped me before and thanks to that great forum
Click to expand...
Click to collapse
1.29.708.15 is not your CID. It's your software version.
If you flash a custom ROM based on 2.17.401.2, your CID will not change.
To return to stock, you can flash any 708 RUU that is the same or newer than 1.29.708.15, or restore the backup you make before installing the custom ROM.
BenPope said:
1.29.708.15 is not your CID. It's your software version.
If you flash a custom ROM based on 2.17.401.2, your CID will not change.
To return to stock, you can flash any 708 RUU that is the same or newer than 1.29.708.15, or restore the backup you make before installing the custom ROM.
Click to expand...
Click to collapse
thats means that I could return back to my old RUU
Thanks very mush & sorry for my annoying questions
Related
So here is a question that I cannot find the answer to. If a ROM like Android Revolution HD is based off the 1.29.401.12 Firmware and I have a 1.29.707.11 based phone, can I install the ROM? I know I would have to unlock and install a custom recovery, but is it possible? I ask because I thought I read somewhere you cant mix firmware updates (ie x.xx.401.xx and x.xx.707.xx) without S-Off or it would cause problems.
Thanks in advance!!
toonhead85
There should be no problem to install latest ARHD ROM. I did it many times coming from stock with different numbers. Any way most of your stock files are reflashed by ROM files. ARHD is universal ROM for any HOX Internatioanal versions.
Since you are replacing the whole firmware, the version of the one you are replacing should not matter.
However, make sure that the new ROM has support for your specific hardware!
/Croaton
Thanks, I shall try the ROM this weekend or next!!
hi guys
i have ONE X Middle East version ( rooted / CWM / unlocked by HTCdev )... and i wanna install
new European update 2.17.XXX . l found it flash by recovery HERE
My question is can i install odexed version on my device normally without problems
or i should be install De-Odexed version .. and why that ?
Sorry for bad my english
That ROM both odexed or deodexed can be flashed via recovery on any One X on any region. It is a custom stock rom.
And don't forget to fastboot flash the boot.img
ckpv5 said:
That ROM both odexed or deodexed can be flashed via recovery on any One X on any region. It is a custom stock rom.
And don't forget to fastboot flash the boot.img
Click to expand...
Click to collapse
OK thanks .. but why With odexed version you can download and flash OTA from HTC
(you need stock boot.img and recovery.img as well) ..and not with De-Odexed version
Because the OTA itself is an odexed version.
ckpv5 said:
Because the OTA itself is an odexed version.
Click to expand...
Click to collapse
so if HTC release a new update via WiFi . i can download it ? right ?
AL PRINCE- said:
so if HTC release a new update via WiFi . i can download it ? right ?
Click to expand...
Click to collapse
someone answering me plz :crying:
If u use stock ROM you will receive OTA when it released
if you use custom ROM You WILL NOT RECEIVE any ota (odexed or deodexed)
If you use custom ROM odexed + ORGINAL Recovery +ORGINAL boot.img + THE ROM VER MATCH YOUR CID
then you may receive the OTA when HTC Release it
but in your case there is none custom ROM has ver x.xx.415.x which is Middle east ver
salman saso said:
If u use stock ROM you will receive OTA when it released
if you use custom ROM You WILL NOT RECEIVE any ota (odexed or deodexed)
If you use custom ROM odexed + ORGINAL Recovery +ORGINAL boot.img + THE ROM VER MATCH YOUR CID
then you may receive the OTA when HTC Release it
but in your case there is none custom ROM has ver x.xx.415.x which is Middle east ver
Click to expand...
Click to collapse
thanks aloooooot :fingers-crossed:
How can I know that?
salman saso said:
If u use stock ROM you will receive OTA when it released
if you use custom ROM You WILL NOT RECEIVE any ota (odexed or deodexed)
If you use custom ROM odexed + ORGINAL Recovery +ORGINAL boot.img + THE ROM VER MATCH YOUR CID
then you may receive the OTA when HTC Release it
but in your case there is none custom ROM has ver x.xx.415.x which is Middle east ver
Click to expand...
Click to collapse
Hi,
Sorry if my questions would seem silly but I am new to Android
How can I kniw the below from my phone?
1. how can I know if my custom ROM is odexed or deodexed?
2. how to know if I have the ORGINAL Recovery +ORGINAL boot.img?
3. How to know if the ROM version matches my CID? or where to find my CID?
thanks.
1. If it's not the ROM the phone came on chances are it's deodexed
2. If you can flash a custom, it's not the stock recovery
3. CID Getter on the Play Store
Reinstall stock ROM
EddyOS said:
1. If it's not the ROM the phone came on chances are it's deodexed
2. If you can flash a custom, it's not the stock recovery
3. CID Getter on the Play Store
Click to expand...
Click to collapse
Thanks for your reply. I will restore to a ROM following the link below is it ok?
http://forum.xda-developers.com/wik...very_-_what_to_do_in_the_event_of_a_bad_flash
(Total recovery - flashing a RUU to completely restore your phone)
My region is Middle East CID is HTC__044 and I will use this file RUU_ENDEAVOR_U_ICS_40_HTC_ARA_1.28.415.9_Radio_1.1204.103.14_release_25679_signed.exe
is that ok? can I start?
I am doing all that as I need to receive FOTA
thanks
Hey guyss, so i just bought this awesome phone on craigslist and it is already rooted and idk if the guy did anything else beside that ,so is there a way i can check everything like firmware, cid, and all the stuff ?
And also , do i need to convert to gpe if i want to install lollipop roms like SkyDragon gpe , blisspop , or cm12 or do i just need to flash it through recovery?
Sent from my Nexus 5 using XDA Free mobile app
1: update the softwar/firmware to the latest (hboot 3.19).
2: no need to convert to gpe. Skydragon works on sense firmware so it's not mandatory.
3: i know in the backup thread is being talked about s-off and such but it's not necessarily needed, only if you wish but i recommend to read up on what s-off is and can do if you don't know that yet.
3.16 is indeed the oldest firmware. But you can check that also in the at&t section. This section is for the international devices actually.
Since its the AT&T version (from your other posts), there is currently no official update to hboot 3.19 and associated firmware. So you will need to s-off by sunshine in order to update firmware (required to run current ROMs).
You can check the hboot screen to see s-on or s-off. You can check for other details (including CID) with fastboot getvar all (if you post the getvar info, delete your serial number and IMEI as they are personal info).
redpoint73 said:
Since its the AT&T version (from your other posts), there is currently no official update to hboot 3.19 and associated firmware. So you will need to s-off by sunshine in order to update firmware (required to run current ROMs).
You can check the hboot screen to see s-on or s-off.
Click to expand...
Click to collapse
Yes sir , I just a off using sunshine , what should I do next ? Supercid ?
P/s I used to have this phone then solve it ( bis mistake)
Sent from my HTC One_M8 using XDA Free mobile app
kevintran.98 said:
Yes sir , I just a off using sunshine , what should I do next ? Supercid ?
Click to expand...
Click to collapse
If using the phone on AT&T's network, I would recommend the firmware included with the following ROM: http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
Flashing this firmware, you do not need to alter CID.
This is the 4.4.4 (software 3.28) firmware package from the US Developer's Edition, which is intended for use on AT&T. Some folks (myself included) have had issues using the WWE firmware on AT&T's network. In particular, broken Google services while on LTE.
redpoint73 said:
If using the phone on AT&T's network, I would recommend the firmware included with the following ROM: http://forum.xda-developers.com/att...-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
Flashing this firmware, you do not need to alter CID.
This is the 4.4.4 (software 3.28) firmware package from the US Developer's Edition, which is intended for use on AT&T. Some folks (myself included) have had issues using the WWE firmware on AT&T's network. In particular, broken Google services while on LTE.
Click to expand...
Click to collapse
After I flash that, I'll be good to go with any Rom right? Or just sense Rom and I have to convert to gpe for gpe Roms
Sent from my HTC One_M8 using XDA Free mobile app
kevintran.98 said:
After I flash that, I'll be good to go with any Rom right? Or just sense Rom and I have to convert to gpe for gpe Roms
Click to expand...
Click to collapse
You don't need to fully convert to run GPE ROMs. Just flash them.
Full conversion to GPE only gains you the GPE partitioning (smaller system partition, and larger user accessible storage) as well as enables official GPE OTAs. But you need to convert back to Sense partitioning to run any Sense ROMs. I don't recommend full conversion to GPE for most folks, unless you really want the GPE partition scheme and/or OTAs.
I won't say "any ROM", but the previously linked firmware will enable you to run most or all the current ROMs. Older ROMs might not play well with the newer firmware.
redpoint73 said:
You don't need to fully convert to run GPE ROMs. Just flash them.
Full conversion to GPE only gains you the GPE partitioning (smaller system partition, and larger user accessible storage) as well as enables official GPE OTAs. But you need to convert back to Sense partitioning to run any Sense ROMs. I don't recommend full conversion to GPE for most folks, unless you really want the GPE partition scheme and/or OTAs.
I won't say "any ROM", but the previously linked firmware will enable you to run most or all the current ROMs. Older ROMs might not play well with the newer firmware.
Click to expand...
Click to collapse
Thank you so much, you've been very helpful like always !
Sent from my HTC One_M8 using XDA Free mobile app
You're welcome, and happy to help.
I would also recommend you check out the AT&T M8 specific forum section, mentioned by Mr Hofs. It contains a lot of info specific to the AT&T variant. This "international" section has lots of good info too, as well as more traffic overall. Neither is really "better", and I actually find it best to read both forum sections:
http://forum.xda-developers.com/att-htc-one-m8
redpoint73 said:
You're welcome, and happy to help.
I would also recommend you check out the AT&T M8 specific forum section, mentioned by Mr Hofs. It contains a lot of info specific to the AT&T variant. This "international" section has lots of good info too, as well as more traffic overall. Neither is really "better", and I actually find it best to read both forum sections:
http://forum.xda-developers.com/att-htc-one-m8
Click to expand...
Click to collapse
thank you , i sure will
1 very last question thou, im just read the link you gave me and understand the procedure but which file is the lastest and which one do i download ? , it kinda confusing
Download:
M8 - 2.23.502.3
http://goo.gl/3DiIQz FULL WIPE REQUIRED
Mirror: http://goo.gl/9wNs1J (Thanks krazyace35)
ATT 1.16 Radio fix (Thanks runsoverfrogs)
** S-OFF IS MANDATORY **
Radio Download: ONLY For 2.23.502.3
http://goo.gl/vB9dA7
Copy radio-1.16.zip to adb/fastboot loacation
Open cmd
Run commands as shown below
fastboot oem rebootRUU
fastboot flash zip radio-1.16.zip
fastboot reboot-bootloader
Make sure radio has flashed correctly reboot...
Modded Hboot(Thanks santod040):
M8 - 2.23.502.3
No Red Text: http://goo.gl/ins3or
Download:
M8 - 2.22.1540.3
http://goo.gl/uoRz8X
Download:
M8 - 2.22.1540.4
http://goo.gl/yE6s5V
Download:
M8 - 3.28.1540.5 (Read flashing instructions included in download)11-11-2014 Update
http://goo.gl/S5hpMC
Blinkfeed update 11-11-2014
http://goo.gl/iYYAEp
Blinkfeed update 12-10-2014
http://goo.gl/FHpxlV
For those who want to update to newest versions for developer build,you must have stock operating system and recovery and soff to run any of these files
Download:
2.22.1540.4 ota
http://goo.gl/7mec4o (Upgrade original stock device,not for custom roms)
Download:
3.28.1540.5 ota
http://goo.gl/MHF4ie(Upgrade original stock device,not for custom roms)
Download:
3.28.1540.5 Firmware only unmodified (Latest 4.4.4 Update,S-OFF REQUIRED)
http://goo.gl/tyhRRZ
Download:
2.22.1540.4 firmware only unmodified(Latest 4.4.3Update,S-OFF REQUIRED)
http://goo.gl/FJ7Hhv
Mirrors for ROM's(Thanks tarund)
http://goo.gl/7AuuJf
Click to expand...
Click to collapse
3.28.1540.5 Firmware only unmodified
redpoint73 said:
3.28.1540.5 Firmware only unmodified
Click to expand...
Click to collapse
hey , so i flashed the 3.28 firmware and everything is fine but i want to flash ARHD rom but , it just got updated to 30.1 with 4.16.1540.8 firmware, so my question is , do i have to flash any 4.16 firmware or just leave it like that and flash the rom ?
kevintran.98 said:
hey , so i flashed the 3.28 firmware and everything is fine but i want to flash ARHD rom but , it just got updated to 30.1 with 4.16.1540.8 firmware, so my question is , do i have to flash any 4.16 firmware or just leave it like that and flash the rom ?
Click to expand...
Click to collapse
You need to update the firmware again to 4.16.
Simple rule, you need to have firmware that corresponds to the custom ROM you want to flash.
Hi everyone, enjoying my awesome M9 like everyone else =D
and its time to move on to the custom rom goodness.
I can't seem to find an answer to the question. (maybe its too obvious? coming from s3)
Mine is a M9 (hong kong), with 1.32.708.15 (s-On) and all the custom roms are 1.32.401.17 based.
Is it safe to Flash it?
This is the only info i managed to find at the ARHD 5.0 OP with regards to the question.
"- If your current firmware version doesn't match ROM firmware version, wiping data inside AROMA is highly recommended!"
Would be nice if I can get some confirmation from you guys.
Yes it is fine right now since it is the same base. Get soff while you can so flashing firmware in the future is easy. Remember always backup first. Use twrp 2864
ratratrat said:
Hi everyone, enjoying my awesome M9 like everyone else =D
and its time to move on to the custom rom goodness.
I can't seem to find an answer to the question. (maybe its too obvious? coming from s3)
Mine is a M9 (hong kong), with 1.32.708.15 (s-On) and all the custom roms are 1.32.401.17 based.
Is it safe to Flash it?
This is the only info i managed to find at the ARHD 5.0 OP with regards to the question.
"- If your current firmware version doesn't match ROM firmware version, wiping data inside AROMA is highly recommended!"
Would be nice if I can get some confirmation from you guys.
Click to expand...
Click to collapse
I did this on the M8 before, I had problems with the wifi and it took ages to boot until I found out that my firmware is old and different from the rom.
Anyway, I did what you are trying to do yesterday, (firmware 15/ rom 17) for a couple of minutes, didnt find any problems.
Before you flash any ROM, BACKUP your system and move it to your PC and use the latest TWRP
Thats good to hear! I'm gonna give it a try once i'm back in town! Thx!
Please Help me!
I have a HTC (M9) Verizon, and base is 1.33.605.15, it is advisable to downgrade the base to 1.32.401.17?? (for install customs roms with this base)
Fito_Tito said:
I have a HTC (M9) Verizon, and base is 1.33.605.15, it is advisable to downgrade the base to 1.32.401.17?? (for install customs roms with this base)
Click to expand...
Click to collapse
ONLY. use firmware for your phone. if you flash a gsm firmware on a cdma phone you are asking for trouble, big time.
Hello guys,
i'm an owner of HTC one M8, with unlocked bootloader from htcdev but with S-ON.
I just want to go back to stock rom, because every custom rom i try has some issues (battery life mainly too short! I dont know if this is because of firmware, i
dont know how to update it or even how to see what is my one now).
But, the only guides i see are with S-OFF devices. Is this possible to to it with s-on?
Also, i would be s-off if there is a still working method, i've seen firewater one doesnt work anymore so there are no other solutions.
EDIT: at least guys, can you tell me how to check and/or update my firmware?
You post this on wrong section .. should be in Q&A ... I'm asking a mod to move this thread to Q&A
Read this thread, it is for both S-On and S-Off to get back to stock - http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
First thing to check is fastboot getvar all result (delete serial & imei no.) then we will know what you need to do
Try MIUI7 rom
Valenz45 said:
Hello guys,
i'm an owner of HTC one M8, with unlocked bootloader from htcdev but with S-ON.
I just want to go back to stock rom, because every custom rom i try has some issues (battery life mainly too short! I dont know if this is because of firmware, i
dont know how to update it or even how to see what is my one now).
But, the only guides i see are with S-OFF devices. Is this possible to to it with s-on?
Also, i would be s-off if there is a still working method, i've seen firewater one doesnt work anymore so there are no other solutions.
EDIT: at least guys, can you tell me how to check and/or update my firmware?
Click to expand...
Click to collapse
listen you can try MIUI based rom for htc it have great battery backup compare to the other marshmallow based roms,
so you first try miui rom(4.4.4) for htc , it have some bugs like google text to speech isnt working but battery backup is awesome. rom is stable though. and you cannot rollback to stock using ruu when your device is S-ON , use sunshine for S-OFF, lol pay $25
saiyansection said:
listen you can try MIUI based rom for htc it have great battery backup compare to the other marshmallow based roms,
so you first try miui rom(4.4.4) for htc , it have some bugs like google text to speech isnt working but battery backup is awesome. rom is stable though. and you cannot rollback to stock using ruu when your device is S-ON , use sunshine for S-OFF, lol pay $25
Click to expand...
Click to collapse
Ok i would like to not pay lel.
THE PROBLEM in using custom roms is, i think, the firmware, because i just flashed trough fastboot the roms, without updating any firmware.
I tryed Android revolution HD and Skydragon but booth had battery problems, i mean the battery was going down too quickly also with screen off (from stats, in 6 hours i say 3 hours deep sleep, 3 hours 300 mhz cpu so it didnt "relax"!
I really want top say thanks to ckpv5 that helped me in PM's and linked me his own guide to restore to stock rom, it worked and it's all perfect! Thanks man!
Just a last question: now i have the stock htc one rom, so i'm doing OTA's. This means my firmware is automatically updated with them?
So if in future i want to install a custom rom MM based, i won't need to flash firmware?
Yes firmware is updated with the OTA .. after the latest OTA 6.12.401.4, you can install latest TWRP and install MM custom ROMs .. no need firmware update anymore
Very well, thanks mate.
for the moment i'll leave the stock rom.
I will use a MM custom rom when they will be based on official MM rom for htc one m8, and not porting from M9/A9
Valenz45 said:
Very well, thanks mate.
for the moment i'll leave the stock rom.
I will use a MM custom rom when they will be based on official MM rom for htc one m8, and not porting from M9/A9
Click to expand...
Click to collapse
There have been MM based Sense custom ROMs since before the new year (Viper, Skydragon Sense, Wolla, ARHD).
S.ROM is the only A9 port.