Develop Bugs

[RECOVERY][ROM]Huawei U8500

Hey,
I recently bought this phone Huawei U8500, and I had a long search on the net where can I get a working recovery, finally I found a modified clockworkmod recovery.
It seems that this phone is highly unpopular.
I just wanted to share my finding.
Here you can download this modified version: Download
Steps to install recovery:
1. Download the clockworkmod
2. Unrar it somewhere on your computer
3. Turn off your phone
4. Press & Hold volume down key + call end (red) key and then press power key.
5. Launch the .bat file on your computer + connect your phone via USB
6. When it's finished, take out the battery and wait 5 seconds before putting it back in
7. Then you can access the recovery by holding volume up key + call(green) key
---------------------------------------------------------------------------------------
One thing I can recommend If your phones android build version doesn't end with "712", I suggest you to update it to the beta release, you'll have more functional dual-touch.
Here is the beta froyo update: Download
To install it:
1. Unrar it to your computer, and find a folder named "dload" with the biggest size.
2. Copy that "dload" filder to root of your SD card
3. turn off phone
4. Hold volume up key + end call (red) key and the press power key. Wait for it to load, it will say something like "Updating system" Wait for it to finish, if it says fail, just try again
5. After it says "Update complete" or "Update successful" just restart your phone and you'll have the new beta firmware.
--------------------------------------------------------------------------------------
In the Russian site I found some unofficial ROM's too.
I haven't tried them yes but if someone is willing here you can download them:
Firmware 2.2 29.01.2011 by Pavlo78
u8500_mao_rls7b2
u8500_mao_rls7++by_march_2
u8500_mao_rls8_by_march
u8500_mao_rls8_by_march
To install one of these ROM's do the following:
1. Copy the ZIP file on root of your SD card, the ZIP file, not RAR.
2. Boot up your phone in recovery mode (by holding volume up key + call(green) key)
3. With your optical trackpad select "Install zip from sd card"
4. From the list choose your ZIP file
5. And then just wait till the installation is complete and then just restart the phone!
------------------------------------------------------------------------------------------
I highly recommend you to back up the original firmware before installing new ROM's
You can do that in recovery mode, just click on nandroid and follow the on screen instructions it will backup your current firmware + your currently installed apps.
I'm not responsible for bricking your phone, if something doesn't go well. By doing the things I wrote, you may void your phones warranty.
Don't forget to thank me
Kind regards
xcoder_123

Bro, may i have to wipe all data via recovery like slash,cache and dalvik cache before i install froyo beta?

This is really helpful...a lot of Bangladeshis will be needing this. Telenor just launched this phone here.

I am using Huawei U8500 (Local branded as GrameenPhone Crystal). I have backed up my current ROM using ROM Manager. Can anyone confirm that the back-up ROM contains all the information including the Customized Branding???

Grameenphone Crystal Firmware U8500
In case You messed up
U8500 V100R001BGDC128B277 (Bengal GP)
Code:
//huaweidevice.com/worldwide/downloadCenter.do?method=downloadFile&flay=software&fileName=38766&attachmentName=U8500V100R001BGDC128B277.zip

monirr said:
In case You messed up
U8500 V100R001BGDC128B277 (Bengal GP)
Code:
//huaweidevice.com/worldwide/downloadCenter.do?method=downloadFile&flay=software&fileName=38766&attachmentName=U8500V100R001BGDC128B277.zip
Click to expand...
Click to collapse
Hi Monirr,
Can u confirm whether the link u provided is for only software upgrade or I can use it as a complete ROM backup (So that I can use it later in case of any failure to Upgrade the OS)

SAJUSIGMA said:
Hi Monirr,
Can u confirm whether the link u provided is for only software upgrade or I can use it as a complete ROM backup (So that I can use it later in case of any failure to Upgrade the OS)
Click to expand...
Click to collapse
Yah This one is the complete stock rom. I checked and found gps preloaded rom and this one is identical.
So no worry about Warranty. just load it when you need to go to gps Customer care.

monirr said:
In case You messed up
U8500 V100R001BGDC128B277 (Bengal GP)
Code:
//huaweidevice.com/worldwide/downloadCenter.do?method=downloadFile&flay=software&fileName=38766&attachmentName=U8500V100R001BGDC128B277.zip
Click to expand...
Click to collapse
10x a lot, monirr, I waz searchin this stock rom ... & do u kno if itz upgradeable 2 Android 2.3.4 or any1 upgraded?

hey im thinking bout buying this phone as i live in bangladesh... can anyone confirm me about the froyo upgrade does it work???

I did download the beta firmware.
And updated the phone's firmware a few minutes ago.
I have the dual touch now, yay (and a little better keyboard).
Many thanks from a Droid noob.

This should be enough for all your stock rom needs.
http://wiki.modaco.com/index.php/Huawei_Firmware_U8500
BTW: If you install the clockwordmod, you will lose the GP stock bootup screen (not the boot animation). So if you are going to claim warranty make sure you flash the GP firmware before you go to the GP centre.
Someone was asking how this phone is...the only issue I have is knowing that I'll never have flash on this thanks to the arm6 processor.

monirr said:
In case You messed up
U8500 V100R001BGDC128B277 (Bengal GP)
Code:
//huaweidevice.com/worldwide/downloadCenter.do?method=downloadFile&flay=software&fileName=38766&attachmentName=U8500V100R001BGDC128B277.zip
Click to expand...
Click to collapse
To upgrade my gp crystal to 2.2 , which one is best rom to download?
or can this model is upgradable to 2.3?pl help.

taavu said:
I did download the beta firmware.
And updated the phone's firmware a few minutes ago.
I have the dual touch now, yay (and a little better keyboard).
Many thanks from a Droid noob.
Click to expand...
Click to collapse
which version you download in which model

taavu said:
I did download the beta firmware.
And updated the phone's firmware a few minutes ago.
I have the dual touch now, yay (and a little better keyboard).
Many thanks from a Droid noob.
Click to expand...
Click to collapse
which beta firmware you download in which model?

ROBINGAZI said:
This should be enough for all your stock rom needs.
http://wiki.modaco.com/index.php/Huawei_Firmware_U8500
BTW: If you install the clockwordmod, you will lose the GP stock bootup screen (not the boot animation). So if you are going to claim warranty make sure you flash the GP firmware before you go to the GP centre.
Someone was asking how this phone is...the only issue I have is knowing that I'll never have flash on this thanks to the arm6 processor.
Click to expand...
Click to collapse
in gp crystal, through rom manager, if i install clockwordmod then a phone list appear , but there no option of this model(u8500). How can i install?

mostafiztuhin said:
in gp crystal, through rom manager, if i install clockwordmod then a phone list appear , but there no option of this model(u8500). How can i install?
Click to expand...
Click to collapse
see the first post of this thread.

mostafiztuhin said:
To upgrade my gp crystal to 2.2 , which one is best rom to download?
or can this model is upgradable to 2.3?pl help.
Click to expand...
Click to collapse
There is a thread in the port section of the Cyanogenmod forum. It started with a lame question but later a lot was discussed about gingerbread 2.3.4. There is a Chinese developer (Slax) who has been working on the rom. However, this rom does have a few issues.
I don't know Chinese and google translate is incomprehensible. You should be able to find all the links needed in the cyanogenmod forum.
here is the link.
http://forum.cyanogenmod.com/topic/21467-huawei-u8500/
for froyo try trial and error with all the official roms. if you don't like one change it. eventually you will find one that meets your need.

monirr said:
In case You messed up
U8500 V100R001BGDC128B277 (Bengal GP)
Code:
//huaweidevice.com/worldwide/downloadCenter.do?method=downloadFile&flay=software&fileName=38766&attachmentName=U8500V100R001BGDC128B277.zip
Click to expand...
Click to collapse
Dear bro,
This link doesn't work. Pls, help me with a active link.
Thanks in advance.

Hello XCoder, and all!
I try this steps, but i stopped after 4th step...
I get a boot logo, and the XP can't recognize droid, unknown device.
than the .bat file just wait for connection.
i try lot of drivers (original U8500, Original Android, and the SDK's driver too) and still "unknown Andoid device"
If i get out battery, take back, and standard Power On, the XP recognize the "Android Composite ADB" device, and bind the SD card, and CDROM image, and works perfectly.
but i can't upgrade in Standard Mode
can anyone have an idea, how i can access the Droid under Recovery Mode?
and all links of huaweidevice.com are unavailable
have new link?
regards, QSoft

qsoft73 said:
Hello XCoder, and all!
I try this steps, but i stopped after 4th step...
I get a boot logo, and the XP can't recognize droid, unknown device.
than the .bat file just wait for connection.
i try lot of drivers (original U8500, Original Android, and the SDK's driver too) and still "unknown Andoid device"
If i get out battery, take back, and standard Power On, the XP recognize the "Android Composite ADB" device, and bind the SD card, and CDROM image, and works perfectly.
but i can't upgrade in Standard Mode
can anyone have an idea, how i can access the Droid under Recovery Mode?
and all links of huaweidevice.com are unavailable
have new link?
regards, QSoft
Click to expand...
Click to collapse
I have same problem here

[Q] Failed Cyanogenmod installation / Can't get Backup on phone via USB

Hello,
Yes I am noob, I hate myself, I used the search button and still didn't come up with a fitting/helpful thread to my problem. So I decided to just go ahead and test the statement „don't worry we're actually nice people “
Got the Xperia Play (rooted, su, cwm5, cwm xperia recovery, busybox / eu version)
Today I tried to Install cyanogenmod 7.2
As told on their page I perfomed a backup of my current Rom (Stock) backup was about 700mb.
Formated and performed a factory reset (did not delete data on sd)
and then tried to install the mod via the update.zip from the recovery screen.
Instalation got aborted Status 7
tried it also with cyanogenmod 7.1
same result, aborted cause of Status 7
This wouldn't be that much of a problem. But now when I want to connect my phone via usb I can't do anything. Shows me Removable disk (m and when I click it, it says insert disc.
Also can't connect it via pc compenian aswell...
Has anyone got a solution for me? If there are open question just ask and I will clearify anything. Thanks for taking the time and reading my thread (thank you if you are going to try and help )
PS: Only Idea I now have left is using fastboot and flashtool and get the backup I did back on the phone... will that work ?

Issue fixed !
Problem
-------------
No Unlucked bootloader
Solution
-------------
Sony Ericsson Firmware via Flashtool -> Phone working
Preventation
-------------
Read Instructions carefully
Thread can be closed, lesson learned

sashake said:
Issue fixed !
Problem
-------------
No Unlucked bootloader
Solution
-------------
Sony Ericsson Firmware via Flashtool -> Phone working
Preventation
-------------
Read Instructions carefully
Thread can be closed, lesson learned
Click to expand...
Click to collapse
I had that issue with my X10Mini
Also, when flashing a Rom its best to "apply zip from sdcard" instead of "install update.zip"...I had nothing but issues with that :S
Sent from my sexy, sultry, suave Xperia Play sporting this season's Ice Cream Sony swimwear

[Q] Bricked my Defy + Please help! [fixed] But network issue now!

I tried to patch my phone with CM9-ICS-MR0-111207-jordan-KERNEL-2.3.4-Quarx build and when I rebooted I get this
bootloader
09.10
err:A5,70,00,00,23
battery ok
ok to program
connect USB
data cable
Now I have googled this and found many options.
So far I have tried these.
droidforums.net/forum/droid-x-hacks/68222-unbricking-your-droid-x.html
When I do this I get a error (in linux ATM so cant tell you the name will get it ASAP) and I have got rsd lite 5.7 and the latest drivers from the motorola site. I have tried many roms and placed it in C:, My documents, in the RSD folder, on the desktop, in the download folder. Always open the program in admin.
Also this:
droidxforums.com/forum/droid-x-sbf/23638-linux-solution-your-windows-rsd-lite-problems.html
I have tried many of there ISO images and all boot and say they start to do something, then it says failed! rebooting and then it reboots and says to remove battery and go into these option (which I cant as it will only boot on the boot loader screen I tried to get into recovery and no luck) so it was a fail also.
I hope there is a solution as this is a pain, I may of put a to high rom on and cant revert back??
I am sick of googling and alot of the links come back to this site and have tried many but all seem to be repetitive and what I have tried.
Thanks in advance

Ok Fixed this site is the best!!! All I done was read the all in one beginners guide and it linked to a rom for the defy plus (all the other defy plus ones I found where folders not RSD files like this one)
So loaded the file into rsd lite and sure enough it went threw.
YAY! I cant believe I recovered my phone! I knew it was something but to find the right image was the trick I guess.
I did install the defy + CM9 image but I am not sure what happened there.
Thanks to all (more so walter79 for the image)
Hope this helps some one out in the future

Ok I got the phone to work with the image posted in the defy + section but when I boot I get no service.
I have tried to do a factory reset and had to input all the accounts again but that did not help.
what can I do?

kelbygreen said:
Ok I got the phone to work with the image posted in the defy + section but when I boot I get no service.
I have tried to do a factory reset and had to input all the accounts again but that did not help.
what can I do?
Click to expand...
Click to collapse
Get the baseband switcher app It changes the network related files to the ones correct for your country/network! You need to set it manually, though, so, it may take a couple of tries to figure out which one is the best choice
http://forum.xda-developers.com/showthread.php?t=1052745

thank you heaps it had telstra in the settings selected it and looks like I have service now. Thank you so much I cant belive I was just about to give up and get a new phone now I have a working phone with 2.3.6 and rooted now I got the network to work again . Super happy, now to see what I was missing out on since I have been pulling my hair out the last few days thinking I got a bricked phone.

kelbygreen said:
Ok Fixed this site is the best!!! All I done was read the all in one beginners guide and it linked to a rom for the defy plus (all the other defy plus ones I found where folders not RSD files like this one)
So loaded the file into rsd lite and sure enough it went threw.
YAY! I cant believe I recovered my phone! I knew it was something but to find the right image was the trick I guess.
I did install the defy + CM9 image but I am not sure what happened there.
Thanks to all (more so walter79 for the image)
Hope this helps some one out in the future
Click to expand...
Click to collapse
Do you have a link for the beginners guide?

ryangus said:
Do you have a link for the beginners guide?
Click to expand...
Click to collapse
[GUIDE] All-in-One Defy Beginner's guide

TCL P600 / Alcatel One Touch Snap 7025D Root and GAPPS

Root and GAPPS instruction for TCL P600
Since TCL P600, TCL P606 and Alcatel One Touch Snap 7025D are the same phones I just write about TCL P600 now. But it's working for both.
TCL P600 root package: http://www.4shared.com/zip/3HRtqraE/TCL_P600_Root.html
HowTo Root TCL P600:
- Extract the file
- Start the flash tool in extracted folder
- Make sure under options it is choosen “with battery”
- In FlashTool load scatter file contained in folder
- Click checkboxes of BOOTIMG and RECOVERY
- Doubleclick on BOOTIMG and refer to TCL-P600_130417__boot_patched_130508-162244.img
- Doubleclick on RECOVERY and refer to TCL-P600_130417__recovery_130508-162244.img
- Switch off mobile and unplug it from usb
- Click “download” in flash tool
- Plug in usb in phone
- If you get a green circle from flash tool saying OK you’re ready with root shell
- Unplug phone and reboot into CWM
- Start Droidtools and plugin usb to phone again
- Install superuser of your choice into phone.
- Ready – you have full root to phone.
If you experience any problems please check if you used the right drivers. Please check drivers attached in folders. Only use them.
Here is the JB gapps zip for flashing with CWM: http://goo.im/gapps/gapps-jb-20121011-signed.zip
Full instruction of getting a well working TCL P600:
1. First of all I updated the phone with TCL updater to the latest firmware.
2. I rooted it as I described before.
3. I deleted lots of China Apps and also under system/media bootup sounds and some - for me - other stuff not needed in order to get more space on system partition.
4. I installed GAPPS through CWM. I did it with this one: http://goo.im/gapps/gapps-jb-20121011-signed.zip
After rebooting I got crash of google search. I ignored it and added my google account. After opening playstore then I got update for google search. After updating there is no crashing anymore.
All other gapps are working quite well. I tested GPS for the TCL P600 and was really suprised it works quite fast and accurate.
The only thing: There is no A-GPS setting. Let's say: There is no GPS setting at all. You can only switch GPS on and off. Settings are not included. Maybe this will be unlocked with a modded rom.
I'm now testing all functions in detail but up to now it works really great.
Hope you got it also up to this point. After all steps this phone is really perfect.
------------------
If you brick your phone you have a brick Not my fault. I don't take responsibility of that my instruction will work for you. It worked for me. So now it's up to you.

I tried what you say but no thing happened .
I have alcatel one touch snap

Where can i buy
Mr.Mahmoud.Pro said:
I tried what you say but no thing happened .
I have alcatel one touch snap
Click to expand...
Click to collapse
Hi Mahmoud,
I want to know where you bought the mobile.. i was searching a lot over the internet and local stores to buy "alcatel one touch snap 7025D" mobile but i couldn't find it anywhere in my area (Andhra pradesh, India.) can you please tell a place or online website where i can find the mobile?

internal memory
hey i'm want to know if the root is swap bet. internal & external memory
that for games over 3 Gega

Custom Recovery
Hey i want to know if this recovery can be ported to my phone the alcatel one touch fierce it is the same as th one touch snap/7025d just without the 8mp camera and splash water proofing everything else is the same i had tried the aoutomatic port for CRR recovery but when it flashed the recovery i got a security error on my alcatel that says "error 101 unaouthorized software installed "it would not boot upand was bricked i bought the same phone again and i am wondering how y'all ported it to the fierces sister phone the one touch snap .thanks and have a great day

I don't know about porting possibility. I guess there is no way. This thread is not about changing the ROM but just how to root the TCL. There is no custom ROM out actually. So I don't see chances to port. Why should this be necessary? Is the stock ROM having problems?
Gesendet von meinem GT-N8000 mit Tapatalk

hello weimerd
my problem is that I have rooted the phone but when i delete Chinese applications to install gapps I deleted the app that handles the notification bar and other things, don't have notifications bar
the keyboard works, after loading another
google search don't work
Do I have to reload the firmware? Where do I can download the stock rom P606 TCL? to star again.
or
How I can recover this app? Can you pass me the app that has that control?
Can you say that apps I have to delete?
sorry by my english

weimerd said:
I don't know about porting possibility. I guess there is no way. This thread is not about changing the ROM but just how to root the TCL. There is no custom ROM out actually. So I don't see chances to port. Why should this be necessary? Is the stock ROM having problems?
Gesendet von meinem GT-N8000 mit Tapatalk
Click to expand...
Click to collapse
NO i just want to see if thos recovery could work in the case that ne2w rom development would occur and to create a backup for people who need it that is why i wanted to see if it could be ported

Solved the problems
Solved the problems.
I was able to upgrade wiht "TCL 2.7.4 Updater Setup.exe" the mobile software, I had the "TCL 2.7.9 Updater Setup.exe" version and this version told me it was updated. When I tested with 2.7.4 has recharged my sw and have gone back to the top, I rooted again with wiemerd instructions and now everything has worked correctly.
Thank you for your instructions and weimerd Sixpenny by spend "TCL S 2.7.4 Updater Setup.exe" saved me.
:laugh::laugh::laugh::laugh::good::good::good::good::good:

Hi all.
Is possible to port or create any custom rom for this device?
Thanks

Hi,
i have Snap 7025X, can this root steps bee used for that version too? Looks like OS is same, i have SIM management even i have 1 sim card.

root ^^^^^
Yeah this root will work if not try kingo root its great plus its one click just t urn on debugging. And make sure that your pc recognizes the phone also try motochopper

angort14 said:
Yeah this root will work if not try kingo root its great plus its one click just t urn on debugging. And make sure that your pc recognizes the phone also try motochopper
Click to expand...
Click to collapse
Thank you, i will try. I must install some other version of OS, official is fully bugged. After i used ROMs from xda for last 2 years, on my old phone, i forgot how bugged is official android.
There are so much crashes with official version, corupted SD card and so on...

please help me. after reflashing of my rom with flash tool. i have lost my imei and i have not done backup of my efs. my alcatel ot 7025d can't recognize any sim. i need efs backup or way to solve of my problem. i live in ivory coast there are not alcatel sav in this country.

I used kingo for root. Its really one click root tool. If your phone is rooted, you can restore to default. You can try to restore it with that tool.
Anyone know where to download Custom Boot Loader and Newer version of OS?
I have huge problem with this phone. There is all the time problem with memory card. I am using kingston class 10, 16gb memory but from time to time, after i take some picture or use default gallery, i get message that my memory card is corrupted. I need to restart phone and everything is ok, but sometimes it require even 3-5-7 restarts and its really anoying. Cant take pictures, use ringtone from memory cartd etc.
I tried with official updater but still use 4.2.1 version. Anyone have any newer custom rom?
Sorry for off topic but i am sure that this problems can be solved with some newer OS.

Pavankumar1889 said:
Hi Mahmoud,
I want to know where you bought the mobile.. i was searching a lot over the internet and local stores to buy "alcatel one touch snap 7025D" mobile but i couldn't find it anywhere in my area (Andhra pradesh, India.) can you please tell a place or online website where i can find the mobile?
Click to expand...
Click to collapse
You have a credit card to buy online ????

EmptySD said:
I used kingo for root. Its really one click root tool. If your phone is rooted, you can restore to default. You can try to restore it with that tool.
Anyone know where to download Custom Boot Loader and Newer version of OS?
I have huge problem with this phone. There is all the time problem with memory card. I am using kingston class 10, 16gb memory but from time to time, after i take some picture or use default gallery, i get message that my memory card is corrupted. I need to restart phone and everything is ok, but sometimes it require even 3-5-7 restarts and its really anoying. Cant take pictures, use ringtone from memory cartd etc.
I tried with official updater but still use 4.2.1 version. Anyone have any newer custom rom?
Sorry for off topic but i am sure that this problems can be solved with some newer OS.
Click to expand...
Click to collapse
I have the same problem, did you get any solution?
Regards

jobenja5 said:
I have the same problem, did you get any solution?
Regards
Click to expand...
Click to collapse
I mentored few problems, i dont know what do you mean.

EmptySD said:
I mentored few problems, i dont know what do you mean.
Click to expand...
Click to collapse
Have you solved the problem with the SD error?

jobenja5 said:
Have you solved the problem with the SD error?
Click to expand...
Click to collapse
Yes, buy new card I tried million things, formatted card using computer, phone, different phone etc. At the end, i bought new card and there is no problems at all. I give my card to my gf and she is using card without problem for last half year.

$10 via Paypal to who help me to solve a bad issue!!!

Hello everybody. I am in a complete bad situation with my phone. I am really thinking to donate 10 dollars to who help me with this! To help me please consider ALL the following facts:
1) I am a complete newbie
2) I have a Samsung Galaxy Note 2 GT-N7100 (from outside USA)
3) I learned how to root the phone from a tutorial on Youtube
4) I've got insterested about having MIUI OS applied to my phone instead of the original Android 4.1.2 that came with my phone.
5) I've made the download of the MIUI zip file from en. miui. com /download-35. html
6) I've installed MIUI using ROM Manager free downloaded from PlayStore
7) I didn't like MIUI.
8) I've tried to come back to original Android downloading the "original" firmware of my phone from SamMobile website
9) I've downloaded the only ROM for GT-N7100 wich didnt have a carrier in it's description
10) I've used Odin to install the "original" Android ROM downloaded from SamMobile
11) The installation from Odin was succeded but my phone never starts!! It keep looping between the Samsung logo and the description of the model of the phone in the screen (it never starts!!)
WHAT DO I DO, PLEASE?!?!?!? I NEED MY PHONE WORKING! I AM DESPERETED!

Bipenett said:
Hello everybody. I am in a complete bad situation with my phone. I am really thinking to donate 10 dollars to who help me with this! To help me please consider ALL the following facts:
1) I am a complete newbie
2) I have a Samsung Galaxy Note 2 GT-N7100 (from outside USA)
3) I learned how to root the phone from a tutorial on Youtube
4) I've got insterested about having MIUI OS applied to my phone instead of the original Android 4.1.2 that came with my phone.
5) I've made the download of the MIUI zip file from en. miui. com /download-35. html
6) I've installed MIUI using ROM Manager free downloaded from PlayStore
7) I didn't like MIUI.
8) I've tried to come back to original Android downloading the "original" firmware of my phone from SamMobile website
9) I've downloaded the only ROM for GT-N7100 wich didnt have a carrier in it's description
10) I've used Odin to install the "original" Android ROM downloaded from SamMobile
11) The installation from Odin was succeded but my phone never starts!! It keep looping between the Samsung logo and the description of the model of the phone in the screen (it never starts!!)
WHAT DO I DO, PLEASE?!?!?!? I NEED MY PHONE WORKING! I AM DESPERETED!
Click to expand...
Click to collapse
Hmm...Try booting into the stock recovery and clearing cache and do a factory reset. Everything Check out okay while flashing?

betoishly said:
Hmm...Try booting into the stock recovery and clearing cache and do a factory reset. Everything Check out okay while flashing?
Click to expand...
Click to collapse
wow...I am a newbie, man. SOrry!!! How do I boot into the stock recovery
I've tried to install back MIUI or even the original android version (both in a zip file) from the SD card inside the phone after I hold VOLUME UP + HOME BUTTON + POWER (then I a choose "update from SD card").. Is that stock recovery?? If "yes", when I tried to make the installation thru this way, my phone replied the following error message "E: signature verification failed".

Don't install yet. Clear everything first then boot. If all goes well go ahead with the update.
Sent from my Nexus 5 using XDA Premium 4 mobile app

Samsung Help Center...
If you are ready to spend $10/- , why dont you go to Samsung help centre ??!!

Resolved
Hello everybody! I've resolved this all by myself.
Using Odin, I installed to my phone a non-official Android Jelly Bean OS (catched on the MIUI official website offered as a "backup"). After that I could install the original Android version for my phone with no problems at all.
My phone's working perfect right now.
Special thank's to betoishly and masterprotocol0097!!!