Related
Hey all. today I decided to try the blazer 4.0 rom. Im currently on Senzation 2.3 . I followed the instructions completely but the phone got stuck on the galaxy logo screen after rebooting. It would not boot into recovery either. I had to go into download mode and use odin to get it working again. can someone please help me out? would it be an issue with the kernel? Im attaching a screen shot so hopefully it would help. Any kind of help, suggestions, flaming or trolling is much appreciated!!!
Make sure you follow the install instructions in Blazer's OP. My experience with fresh Blazer installs:
-Nandroid
-Wipe /system, /data, /cache
-Install Blazer ROM
-Reboot and let phone site for 10 minutes
-Reboot recovery and install kernel of choice (if different from packaged Blazer kernel)
-Reboot
Good luck. Feel free to poll the large user community for help in the Blazer ROM thread in the Dev section
Make sure you are NOT flashing with the hitman touch recovery that has given allot of people problems including myself.
rbtrucking said:
Make sure you are NOT flashing with the hitman touch recovery that has given allot of people problems including myself.
Click to expand...
Click to collapse
Hi. No Im not running Hitman. I followed his post exactly. I guess i will try it again today after work. I will let you know how it went.
nibrwr said:
Make sure you follow the install instructions in Blazer's OP. My experience with fresh Blazer installs:
-Nandroid
-Wipe /system, /data, /cache
-Install Blazer ROM
-Reboot and let phone site for 10 minutes
-Reboot recovery and install kernel of choice (if different from packaged Blazer kernel)
-Reboot
Good luck. Feel free to poll the large user community for help in the Blazer ROM thread in the Dev section
Click to expand...
Click to collapse
Hi. Your procedures are just like what i did but no dice for me. will trying doing it again today. Thank you for your help.
If you have not flashed EL29 modem, do so... Then follow steps. After Manuel wipe, I would flash format all zip too. Btw, first boot could take up to 5mins...
I have the same problem when I went from blazer 3.8 to blazer 4.0. It just won't boot pass the galaxy logo. I have since flash a couple if different recoveries (cwm,rogue,etc). I was finally able to make it work blazer 4.0 with I've of them recoveries (but I forgot which one). Only problem now is that it won't work with the blazer 3.8 ROM.
I like the Blazer roms but they are very tricky/troublesome to flash. I don't have a problem with any of the recoveries with the other roms.
Blazer rom install
I've been using Rogue Recovery 1.1.2 (CWM v5.o.2.7) flash blazer roms 3.7. to 4.0 with out a problem also Caulkins roms might try that if your on a different version.
If you get stuck on SGS2 screen after flashing the new ROM, reboot to recovery (volume up + power). Flash the ROM again without wiping anything, then reboot.
shahin26 said:
Hey all. today I decided to try the blazer 4.0 rom. Im currently on Senzation 2.3 . I followed the instructions completely but the phone got stuck on the galaxy logo screen after rebooting. It would not boot into recovery either. I had to go into download mode and use odin to get it working again. can someone please help me out? would it be an issue with the kernel? Im attaching a screen shot so hopefully it would help. Any kind of help, suggestions, flaming or trolling is much appreciated!!!
Click to expand...
Click to collapse
You're flashing calkulins format all zip, after wipe, and before flashing the rom....right?
1brainsurgeon said:
You're flashing calkulins format all zip, after wipe, and before flashing the rom....right?
Click to expand...
Click to collapse
I didn't flash calkulins format all zip at first, just did nano, wipe and flash and I was running into the same issue. I finally did a complete format, then flashed calkulins format, then flashed Blazer..worked perfect.
I can Only go into download mode after flashing blazer. it will not let boot into recovery at all.
shahin26 said:
I can Only go into download mode after flashing blazer. it will not let boot into recovery at all.
Click to expand...
Click to collapse
Yeah that happens to me too. You have to use odin to flash a recovery tar file to the phone. I use the cwm 5.0 tar file.
Hi guys, I have one question. When flashing the rom, should I select wipe data/factory reset option before flash calkulins format all zip or just flashing calkulins format all zip is going to be enough? Also, should I select wipe cache partition option too? I am on stock and this is gonna be my first rom.
Hi all, I'm new here (well, not to XDA) as I just purchased this phone 2 days ago. I love it so far. It's such and upgrade from my LG Optimus that I almost considered not rooting or flashing ROM's. Of course, I caved in last night.
Anyway, I have a couple questions regarding Odin and the process around flashing different kernels/modems, etc. Any help would be great. I successfully flashed Blue Kuban without issues as I'm familiar with CWM and all that great stuff.
1. Is there a good tutorial that I can use to do more research on Odin? I see there's a mobile version and a PC version, so I'm not sure which to use.
2. I see in some ROM's, the install instructions state to first flash a specific kernel with Odin. Is this to prevent bricks from flashing from ICS to ICS ROM's?
3. Hypothetically, if I wanted to switch from Blue Kuban to CM9 (or any other ICS ROM), couldn't I just restore my stock GB back up and then flash CM9 (or any other ICS ROM)? If not, what is the most user friendly method you use?
Thanks all, really glad I chose this phone, it looks like there's awesome development for it! Any help is greatly appreciated!
mjs2011 said:
Hi all, I'm new here (well, not to XDA) as I just purchased this phone 2 days ago. I love it so far. It's such and upgrade from my LG Optimus that I almost considered not rooting or flashing ROM's. Of course, I caved in last night.
Anyway, I have a couple questions regarding Odin and the process around flashing different kernels/modems, etc. Any help would be great. I successfully flashed Blue Kuban without issues as I'm familiar with CWM and all that great stuff.
1. Is there a good tutorial that I can use to do more research on Odin? I see there's a mobile version and a PC version, so I'm not sure which to use.
2. I see in some ROM's, the install instructions state to first flash a specific kernel with Odin. Is this to prevent bricks from flashing from ICS to ICS ROM's?
3. Hypothetically, if I wanted to switch from Blue Kuban to CM9 (or any other ICS ROM), couldn't I just restore my stock GB back up and then flash CM9 (or any other ICS ROM)? If not, what is the most user friendly method you use?
Thanks all, really glad I chose this phone, it looks like there's awesome development for it! Any help is greatly appreciated!
Click to expand...
Click to collapse
1. OK for Odin, you can try searching for a tutorial on qbkings YouTube channel. Basically all you need to know is that the PDA slot is for kernels and such where as phone slot is for modems. Only have auto reboot checked in top right settings. Mobile Odin works the same way. You can flash kernels from there and can save you time and when you're away from a computer. It currently has problems flashing modems however. There is a paid and lite version which you can find here in xda if you search a bit.
2. Yes this is to prevent bricking which has been happening when wiping data/factory rest in custom recoveries repackaged in ICS kernels. This is why its recommended to go back to el26 because this is the last true source (we don't have ICS source yet) we had.
Whenever changing roms, you must Odin/mobile Odin the el26 cwm kernel and do any rom flashing, restoring, backing up from there. So if you want to switch to CM9 from the ICS version of Blue Kuban I'm assuming, Odin el26 cwm kernel and flash cm9+gapps there.
Anymore questions let me know
Sent from my SPH-D710 using Tapatalk
Awesome, great info and I'll definitely pick up the mobile version. So it looks like I only need to flash the kernel, not actually flast a GB Rom?
The only other thing I'm wondering is if you recommend using the Rogue CWM Recovery. I have it installed right now. Are all ROMS compatible with this recovery?
Thanks again for your quick and helpful answer!
I personally use the rouge 1.4.1 kernel to do all my flashing. Rouge recovery is built from tweaking the cwm recovery. In essence, they are the same thing. Rouge has less "no's" and the menus are better organized, so I use it.
mjs2011 said:
Awesome, great info and I'll definitely pick up the mobile version. So it looks like I only need to flash the kernel, not actually flast a GB Rom?
The only other thing I'm wondering is if you recommend using the Rogue CWM Recovery. I have it installed right now. Are all ROMS compatible with this recovery?
Thanks again for your quick and helpful answer!
Click to expand...
Click to collapse
Yea all you need is the kernel. If you're on an ICS rom when you flash the el26 cwm kernel, it won't boot your phone but you can go into recovery still.
I really wouldn't recommend any custom recovery at this time for ICS. I mean it takes maybe an extra minute odining the el26 cwm kernel or so instead of directly booting into rogue recovery. From there you can flash mods, tweaks, etc and then just reflash a compatible ICS kernel. What do you really need rogue for? Not worth the risk IMO.
Sent from my SPH-D710 using Tapatalk
slick_rick said:
Yea all you need is the kernel. If you're on an ICS rom when you flash the el26 cwm kernel, it won't boot your phone but you can go into recovery still.
I really wouldn't recommend any custom recovery at this time for ICS. I mean it takes maybe an extra minute odining the el26 cwm kernel or so instead of directly booting into rogue recovery. From there you can flash mods, tweaks, etc and then just reflash a compatible ICS kernel. What do you really need rogue for? Not worth the risk IMO.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Interesting. I'll have to read up more regarding Odin. So I could literally open Odin and plug my phone in and then flash the el26 kernel and flash whatever ROM I want from Odin as well? Sorry, a little confused there. Just not sure how I'd flash a ROM without a custom recovery.
Thanks again, I'll also check out some tutorials. I'm guessing it will feel like 2nd nature in a week, just learning the new process.
The recovery is built into the kernel for this device. I use odin, flash the el29 rouge kernel v1.4.1, when the phone resets after the flash, boot into recover using volume up and power, wipe, flash, whatever you want, make sure you reinstall ics rom or kernel if you are on ics and reboot.
Ah, so if I flash the EL26 Kernel, will that overwrite my Rogue Recovery?
mjs2011 said:
Interesting. I'll have to read up more regarding Odin. So I could literally open Odin and plug my phone in and then flash the el26 kernel and flash whatever ROM I want from Odin as well? Sorry, a little confused there. Just not sure how I'd flash a ROM without a custom recovery.
Thanks again, I'll also check out some tutorials. I'm guessing it will feel like 2nd nature in a week, just learning the new process.
Click to expand...
Click to collapse
Well download whatever rom+mods/etc and put the files on your phone. Then just odin/mobile Odin the el26 cwm kernel and flash whatever you want from there, ICS or GB without no chance of a brick.
On our phone and I think most Samsung's for that matter, the recovery isnt separate from any other partition like with HTC. It must be packed into the kernel. So whenever you flash a rom, whatever recovery is packed in with that kernel included with the rom is what you're getting. Most devs are packing in stock Android recovery to cut down on bricks and instead recommend always flashing from el26 cwm kernel.
So yea that's what makes mobile Odin so great. Have el26 on your storage and you can switch roms very fast, easy, and safe.
Anymore questions just ask.
Edit: are you on GB or ICS Blue Kuban and what rogue also?
Sent from my SPH-D710 using Tapatalk
Thanks, really good info. I'm on Blue Kuban ICS right now with Rogue CWM 5.0.2.7. Looks like Odin will be a very easy way once I get comfortable with it.
So basically, I'll put the kernel zip in the PDA slot in Odin and let it do its thing, then my phone will auto reboot into the kernel's recovery where I can flash the ROM? Or do I flash the kernel in Odin, and also flash the ROM in Odin as well?
mjs2011 said:
Thanks, really good info. I'm on Blue Kuban ICS right now with Rogue CWM 5.0.2.7. Looks like Odin will be a very easy way once I get comfortable with it.
So basically, I'll put the kernel zip in the PDA slot in Odin and let it do its thing, then my phone will auto reboot into the kernel's recovery where I can flash the ROM? Or do I flash the kernel in Odin, and also flash the ROM in Odin as well?
Click to expand...
Click to collapse
Odin is just used to flash the safe el26 cwm kernel onto your phone. It will auto reboot and just hang at the Galaxy S II screen since the GB kernel can't boot an ICS rom so just power+volume up into it. Hold it for maybe up to 15 seconds but it'll come around. You then flash the rom in recovery from there. So put you rom files, etc on your phone before you Odin the kernel.
Sent from my SPH-D710 using Tapatalk
slick_rick said:
Odin is just used to flash the safe el26 cwm kernel onto your phone. It will auto reboot and just hang at the Galaxy S II screen since the GB kernel can't boot an ICS rom so just power+volume up into it. Hold it for maybe up to 15 seconds but it'll come around. You then flash the rom in recovery from there. So put you rom files, etc on your phone before you Odin the kernel.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
oh ok sweet. That sounds pretty easy, actually! LOL! One last question hopefully, do I need to extract the kernel zip or do I just place the zip in the PDA slot?
Thanks again for your help today. It really cleared a bunch of questions I had.
mjs2011 said:
oh ok sweet. That sounds pretty easy, actually! LOL! One last question hopefully, do I need to extract the kernel zip or do I just place the zip in the PDA slot?
Thanks again for your help today. It really cleared a bunch of questions I had.
Click to expand...
Click to collapse
Kernels flashed through PDA slot in Odin will be in either .tar or tar.md5 format, .zips are for cwm recovery only. You can find the el26 cwm kernel in the kernel repository sticky in dev section, its the first kernel listed. No problem, glad to help.
Sent from my SPH-D710 using Tapatalk
or u can use the 34gt auto
http://forum.xda-developers.com/showthread.php?t=1342728
Thanks again everyone. I successfully switched roms today with no issues.
Sent from my SPH-D710 using XDA
I just upgraded my E4GT Sprint from GB to ICS using the oneclick installer. I am trying to install the CODENAME rom from CWM but havng issues getting CWM installed. I used the the E4GT auto but FE16 isnt listed so i tried FE15 but it wont load into CWM. So i tried this link "http://forum.xda-developers.com/showthread.php?t=1390393" and flashed from ODIN and it goes into CWM but before it boots it says my phone is a gt-i9100 and has a ! on the bottom. It appears to boot though so i booted back into CWM and tried to flash the ZIP for CODENAME and the gapps file and it jsut gets stuck at the boot screen with the transformer logo. I cant get into CWM after that point and have to ODIN back to ICS. I am on ICS now and its working fine. Does anyone have any instructions on getting CWM installed and the codename rom from a fresh odin ICS install?
mazdaspeed6 said:
I just upgraded my E4GT Sprint from GB to ICS using the oneclick installer. I am trying to install the CODENAME rom from CWM but havng issues getting CWM installed. I used the the E4GT auto but FE16 isnt listed so i tried FE15 but it wont load into CWM. So i tried this link "http://forum.xda-developers.com/showthread.php?t=1390393" and flashed from ODIN and it goes into CWM but before it boots it says my phone is a gt-i9100 and has a ! on the bottom. It appears to boot though so i booted back into CWM and tried to flash the ZIP for CODENAME and the gapps file and it jsut gets stuck at the boot screen with the transformer logo. I cant get into CWM after that point and have to ODIN back to ICS. I am on ICS now and its working fine. Does anyone have any instructions on getting CWM installed and the codename rom from a fresh odin ICS install?
Click to expand...
Click to collapse
You really should read more before hopping around like that without checking. Real risk for a brick here.
-Flash EL26 stock CWM kernel via the PDA option in ODIN/Mobile ODIN
-When phone begins reboot, Hold Power + Volume up until boots into recovery.
-Wipe data/factory, cache and dalvik cache
-Flash ROM
-Flash Gapps
-Reboot
Those are the instructions right from the developer's thread. This is an AOSP rom and it sounds like you're trying to install TW kernels.
http://forum.xda-developers.com/showthread.php?t=1662295
This is the kernel repository. It links to each kernel where you can read further and find out if they are safe for flashing things.
Seems like you've done a bunch of stuff. But you really should do a whole bunch of reading first or you will brick your phone.
My suggestion would be to use sfhub's one-click http://forum.xda-developers.com/showthread.php?t=1705730 to get to a fully stock rooted device. Then use his autoroot package http://forum.xda-developers.com/showthread.php?t=1342728 to add CWM (the lates in the package is FF11+CWM Agat I believe) then you can add Agat's latest kernel with CWM http://forum.xda-developers.com/showthread.php?t=1721065
But I would be very careful when flashing ANY ROM; use the developers prefered method. Some recommend using EL26 CWM. Some a different recovery or procedure. Be especially careful with CM9 and AOKP builds to follow the directions there.
Good luck
So while i was waiting for a response i just went back to the stock GB using the one click install. I then used the autoroot package to install CWM and then restored my nandroid backup before i made in the very beginning. So my phone is back to a perfect state with GB and CWM installed. Can i just flash the ROM from CWM as is then? For some reason i thought it had to be "converted" to ICS and thats what started this whole mess. Things have changed since my old Evo
I just noticed that im running EL29 not 26...does that matter? When i try to flash that CMW EL26 stock root is when it gave me that gt-i9100 on boot and the ! at the bottom. Using the autoroot and choosing the EL29 Rogue is the only way i got it installed.
mazdaspeed6 said:
So while i was waiting for a response i just went back to the stock GB using the one click install. I then used the autoroot package to install CWM and then restored my nandroid backup before i made in the very beginning. So my phone is back to a perfect state with GB and CWM installed. Can i just flash the ROM from CWM as is then? For some reason i thought it had to be "converted" to ICS and thats what started this whole mess. Things have changed since my old Evo
I just noticed that im running EL29 not 26...does that matter? When i try to flash that CMW EL26 stock root is when it gave me that gt-i9100 on boot and the ! at the bottom. Using the autoroot and choosing the EL29 Rogue is the only way i got it installed.
Click to expand...
Click to collapse
My friend some good suggestions above your post. Give yourself a day or two and do some reading prior to flashing. This way you may not end up at Sprint making up stories about why your phone wont boot up.
Let me just echo what everybody else has said, you're gotta read more. A lot more! If you're one goal is to get CNA in your phone I would recommend reading all of the very first post on that thread. They give step by step instructions.
If you need CWM there are several options to get it on your phone. Both sfhub and I have put together several one-click and automated options to get it on your phone.
One thing that hasn't been suggested yet but I would strongly encourage you to do is to read the "How Not To Brick Your E4GT" thread. It's sticked in the General section.
Good luck!
Two more things.
1) If you're going to ask for help give it a few minutes before trying something new. It takes people a minute to reply. Sometimes waiting that extra minute or two is all you need to be saved from bricking.
2) Don't be afraid to hit your thanks button for everyone who has offered advice already. I got them once for you but it might not hurt to do it again.
I have been looking around for about an hour or two trying to find a solid tutorial on how to install a custom recovery to install new Roms. I flashed my phone onto Virgin Mobile on FH13. It seems to me that there is more than meets the eye to installing a recovery on this phone. I really don't want to mess anything up at all. Could anyone guide me the right way as to how I can get CWM on my phone? I appreciate any help you can give me. Thanks!
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
RainMotorsports said:
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
Click to expand...
Click to collapse
Also new to the e4gt, im currently rooted on fh13.
say i want to flash paranoidandroid, which kernel (which includes recovery?) would you recommend?
also this is either flashed from odin (pc) or can be done through mobile odin?
then once kernel is flashed, i can then reboot into recovery, wipe and flash rom/gapps?
sorry for all the questions, just want to make sure!
bongzilla said:
Also new to the e4gt, im currently rooted on fh13.
say i want to flash paranoidandroid, which kernel (which includes recovery?) would you recommend?
also this is either flashed from odin (pc) or can be done through mobile odin?
then once kernel is flashed, i can then reboot into recovery, wipe and flash rom/gapps?
sorry for all the questions, just want to make sure!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1953783
RainMotorsports said:
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
Click to expand...
Click to collapse
My phone already has root. Everything else is stock. 4.0.4, build FH13, with no custom recoveries.
I don't understand what you mean in your second paragraph with "repacked stock" or "custom tw kernel".
I am completely lost as to where I should be going. My plan is to install this rom: http://goo.im/devs/Shabbypenguin/E4GT-Nightlies
How would I go around to getting this on my phone?
Also, what about this rom: http://forum.xda-developers.com/showthread.php?t=1810315
I am not sure which rom runs the fastest and most efficient. There are so many kernels for so many things, I have absolutely no idea which kernel to flash and how to flash it.
EDIT: So I have done some more reading up and I THINK I can starting to understand some of it. I assume the steps are to:
1. Install Mobile Odin Lite on my phone.
2. Flash the EL26 kernel on Odin Lite. Link to kernel: http://forum.xda-developers.com/showthread.php?t=1662295 (first kernel on the page)
3. This part I am kinda lost. Not sure if that kernel installed a new recovery or not. I assume I just reboot and go into recovery.
4. Nandroid a backup of my ICS stock that is on now? Can I even go back to this stock backup after putting on a new Rom? Which kernel would I need to install backup of stock?
5. Wipe data, dalvic, and install new Rom using instruction it came with. My problem is I want to run this Rom: http://goo.im/devs/Shabbypenguin/E4GT-Nightlies and it has no instructions. I assume you just wipe data and dalvic?
6. flash Rom, then flash Gapp? It doesn't have a link for any of the Gapps, so either I have to find a link to download Gapp or that rom already comes with it? Not sure.
7. Reboot into new Rom? Not sure if I missed a step or not.
Another question I have is with the kernels. Can I just leave it on the EL26 kernel for daily use of the phone? Say I want to install maybe cm10 next, do I just keep it on EL26?
Sorry for the spam of questions. I like to be 100% certain.
Best bet if your trying to install CM9 is to go to the EL26 CWM kernel as all of the AOSP rom instructions dictate. Using the EL26 kernel means your phone will only boot to Download and Recovery as it will only boot gingerbread roms.
Download the nightly you want to the device and then flash the EL26 CWM kernel in Mobile ODIN. After its all over with you might need to battery pull if you messed up booting into recovery and then boot into recovery (power + vol up). Install the rom. Install gapps. Wipe cache/dalvik but as I will recommend below you should just backup everything and a full wipe.
You can nandroid if you want but it will be making a copy of the ICS rom you have with the EL26 kernel on it so it is literally a restore to the point your starting from not where you were just before that. Its still a good idea if your afraid of losing things. I would use Super Backup from the market to backup your Contacts, Call Logs and MMS. Wipe cache and dalvik and all that. But realisticly you should backup your apps and data if you have Titanium Backup and start fresh just factory reset after your on CM9. Restore your apps with data (no system data) after that. A clean install will present the least of issues, even the Samsung updates from one rom to another are not without issues.
You can not boot anything but gingerbread with EL26 and once you install a rom you will be on the kernel with that rom. So you will have a Linux 3 android kernel with cwm 6 if you go with a CM9 nightly. From there you can flash the next nightly or the next beta etc. Older stuff will not flash from your new setup as AOSP roms have switched to a new device name in the build.prop.
As far as gapps here it is - http://goo.im/gapps/gapps-ics-20120429-signed.zip and don't forget to put this on the device ahead of time or you will have to mount usb and transfer using the pc in recovery.
RainMotorsports said:
Best bet if your trying to install CM9 is to go to the EL26 CWM kernel as all of the AOSP rom instructions dictate. Using the EL26 kernel means your phone will only boot to Download and Recovery as it will only boot gingerbread roms.
Download the nightly you want to the device and then flash the EL26 CWM kernel in Mobile ODIN. After its all over with you might need to battery pull if you messed up booting into recovery and then boot into recovery (power + vol up). Install the rom. Install gapps. Wipe cache/dalvik but as I will recommend below you should just backup everything and a full wipe.
You can nandroid if you want but it will be making a copy of the ICS rom you have with the EL26 kernel on it so it is literally a restore to the point your starting from not where you were just before that. Its still a good idea if your afraid of losing things. I would use Super Backup from the market to backup your Contacts, Call Logs and MMS. Wipe cache and dalvik and all that. But realisticly you should backup your apps and data if you have Titanium Backup and start fresh just factory reset after your on CM9. Restore your apps with data (no system data) after that. A clean install will present the least of issues, even the Samsung updates from one rom to another are not without issues.
You can not boot anything but gingerbread with EL26 and once you install a rom you will be on the kernel with that rom. So you will have a Linux 3 android kernel with cwm 6 if you go with a CM9 nightly. From there you can flash the next nightly or the next beta etc. Older stuff will not flash from your new setup as AOSP roms have switched to a new device name in the build.prop.
As far as gapps here it is - http://goo.im/gapps/gapps-ics-20120429-signed.zip and don't forget to put this on the device ahead of time or you will have to mount usb and transfer using the pc in recovery.
Click to expand...
Click to collapse
Ah, I read it twice and now it makes more sense. I have a pretty good idea of what to do now.
Put rom and gapp on phone, install EL26, backup, full wipe, flash rom and gapp, rom will install new kernel for me, then just reboot.
Last question, I just want to make sure. What exactly is a full wipe on this phone. I have done plenty of full wipes on the evo 4g. I am just asking because I hear some people have problems when they do a full wipe.
I really appreciate your help. Thank you!
Sorry if I jumbled everything together in my post by the I was running out the door. But this Hurricanne has stopped that and I regret not taking my time.
Well what I mean is a factory reset which formats /Cache and /Data. When you install the rom its going to format /System prior to writing the new firmware/rom. /Data has all your user apps, their data and your information etc. This does not wipe the Internal SD or the External SD though at times a line saying it was does come up in CWM.
Just don't do a Factory reset on the stock kernel you are on now, its fine on EL26 its fine on the kernels that come with the CM9 nightlies. Super Backup apparently does app's now too. I have never used it since I have Titanium Backup Pro but figured its also worth mentioning.
A note on turning back. As I said before if you flash the EL26 CWM kernel you wont be able to boot the ICS rom installed on the phone. At that point to go back instead of forward you can flash the FH13 kernel in desktop ODIN or the zip in CWM and you will have the FH13 kernel instead of EL26 and be back where you were. But once you flash the EL26 CWM kernel your goal at that point is flashing your rom of choice in CWM and not things like booting the phone.
You should be "okay" coming from a dirty install just wiping cache. But you may never know if a problem your having is the rom or some left over data unless you go clean and factory reset. Its a choice and its also a choice you can make later as you can always reset later. I would back up anything important first before doing any of this. Not so much a worry about bricking, as just about any normal situation will be recoverable, but more so to the point of if you have to wipe the phone and start from scratch.
RainMotorsports said:
Sorry if I jumbled everything together in my post by the I was running out the door. But this Hurricanne has stopped that and I regret not taking my time.
Well what I mean is a factory reset which formats /Cache and /Data. When you install the rom its going to format /System prior to writing the new firmware/rom. /Data has all your user apps, their data and your information etc. This does not wipe the Internal SD or the External SD though at times a line saying it was does come up in CWM.
Just don't do a Factory reset on the stock kernel you are on now, its fine on EL26 its fine on the kernels that come with the CM9 nightlies. Super Backup apparently does app's now too. I have never used it since I have Titanium Backup Pro but figured its also worth mentioning.
A note on turning back. As I said before if you flash the EL26 CWM kernel you wont be able to boot the ICS rom installed on the phone. At that point to go back instead of forward you can flash the FH13 kernel in desktop ODIN or the zip in CWM and you will have the FH13 kernel instead of EL26 and be back where you were. But once you flash the EL26 CWM kernel your goal at that point is flashing your rom of choice in CWM and not things like booting the phone.
You should be "okay" coming from a dirty install just wiping cache. But you may never know if a problem your having is the rom or some left over data unless you go clean and factory reset. Its a choice and its also a choice you can make later as you can always reset later. I would back up anything important first before doing any of this. Not so much a worry about bricking, as just about any normal situation will be recoverable, but more so to the point of if you have to wipe the phone and start from scratch.
Click to expand...
Click to collapse
That clarified a lot, thanks.
So I did it all. I did a factory reset from the new kernel. did dalvic also. I installed the new rom and gapp. Problem is that once I reboot, it shows the Galaxy SII screen, then goes into a black screen. I can't turn it back on again, so I remove the battery and it can restart. Does the same thing though. I followed your instruction and http://e4gtcm.blogspot.com/p/cm9-install-guide.html
What did I do wrong? I am worried I messed up my phone completely.
EDIT: So I went back into recovery and it was now a new version of CWM. I did everything over again; factory reset, cache, dalvic, and it is doing the same thing. Boots up "Galaxy SII" screen, then a black screen. It seems to still be on in the black screen seeing that it doesn't "turn" on again. I can hold if for 15 second or so for it to reset and does the same thing. Why is there a black screen?
Sorry for not checking back. Your probably freaking right now lol but relax your at a good point everything is fine.
Either a bad download or the nightly you went with happens to be a baddy. I am still on 10/20 I was gonna flash 10/28 today but the weather is screwing with me. goo.im seems pretty slow today.
Download another, battery pull and hold vol up + power until it hits recovery then go into mounts and mount usb storage hook a usb cable to the pc and copy over another build. I would say try 10/20 just because it works pretty good but that won't stop another bad download in which case you have to try try again.
Worst case from here we can just odin you back to stock rooted FH13 or your choice of other. Your phone is fine from what you have told me so far. I can upload one of the builds I have if you think ti would help any.
RainMotorsports said:
Sorry for not checking back. Your probably freaking right now lol but relax your at a good point everything is fine.
Either a bad download or the nightly you went with happens to be a baddy. I am still on 10/20 I was gonna flash 10/28 today but the weather is screwing with me.
Download another, battery pull and hold vol up + power until it hits recovery then go into mounts and mount usb storage hook a usb cable to the pc and copy over another build. I would say try 10/20 just because it works pretty good but that won't stop another bad download in which case you have to try try again.
Worst case from here we can just odin you back to stock rooted FH13 or your choice of other. Your phone is fine from what you have told me so far.
Click to expand...
Click to collapse
Phew! I was pretty positive that I could still get back to something working, just my paranoid self was getting tense. I got 10/28. I guess I will do 10/20. Do you know what the other updates have? I would hate to install something that isn't working its most efficient.
Again, thank you so much. You were of great help! Good luck with the weather issue. Hope you're safe!
I stopped following chris's experimentals so i am not sure what the most recent focuses have been. The Nightlies have whatever code was commited. They are built automatically and can range from very stable to not booting at all. I dont have any of the links on me but someone can get it to you. Reading commits is not exactly 100% user friendly especially if your not a developer. But they often have clues. I would follow the CM9 Beta thread and the CM9 User Support Threads - http://forum.xda-developers.com/showthread.php?t=1874374 and http://forum.xda-developers.com/showthread.php?t=1720771
I used to DL nightlies from work over 3g or 4g all the time and would get a bad dl and end up in situations where even my experienced self felt like I couldn't fix it till I got home and always got the phone running within an hour without the assistance of a near by pc.
I am uploading 10/20 to my server just in case its in Chicago so if your away from the weather it should be unaffected for the most part. Glad its not in NY anymore.
EDIT - http://android.rainmotorsports.net/10-20-CM9-d710-KANG.zip the md5 hash as I have it is 66246125ACDBEF2EBF2144E0CBFEBB7B and it matches the md5 listed on goo.im
RainMotorsports said:
I stopped following chris's experimentals so i am not sure what the most recent focuses have been. The Nightlies have whatever code was commited. They are built automatically and can range from very stable to not booting at all. I dont have any of the links on me but someone can get it to you. Reading commits is not exactly 100% user friendly especially if your not a developer. But they often have clues. I would follow the CM9 Beta thread and the CM9 User Support Threads - http://forum.xda-developers.com/showthread.php?t=1874374 and http://forum.xda-developers.com/showthread.php?t=1720771
I used to DL nightlies from work over 3g or 4g all the time and would get a bad dl and end up in situations where even my experienced self felt like I couldn't fix it till I got home and always got the phone running within an hour without the assistance of a near by pc.
I am uploading 10/20 to my server just in case its in Chicago so if your away from the weather it should be unaffected for the most part. Glad its not in NY anymore.
EDIT - http://android.rainmotorsports.net/10-20-CM9-d710-KANG.zip the md5 hash as I have it is 66246125ACDBEF2EBF2144E0CBFEBB7B and it matches the md5 listed on goo.im
Click to expand...
Click to collapse
I just got it downloaded. It is now up and running perfectly. I appreciate all your help man, thanks a bunch. I live in Washington state. So the weather wont affect me.
Good evening all. I hope this is the right forum to post my question about recovery for my e4g touch. I recently rooted my phone and my phone is currently on the fi27 build. Is there a recovery i can put on there now to go ahead and start flashing ruins, or will i have to wait for qbkng77 to post his video on you tube on putting cwm recovery on fi27 rooted e4g touch? Thanks in advance for the help!
Sent from my SPH-D710 using xda app-developers app
n1stunna84 said:
Good evening all. I hope this is the right forum to post my question about recovery for my e4g touch. I recently rooted my phone and my phone is currently on the fi27 build. Is there a recovery i can put on there now to go ahead and start flashing ruins, or will i have to wait for qbkng77 to post his video on you tube on putting cwm recovery on fi27 rooted e4g touch? Thanks in advance for the help!
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I assume you do the same thing as I did. Get the EL26 kernel and flash it with Mobile Odin. I would wait on someone else to confirm that though.
Another really quick question. I want to overclock my phone. I tried using setcpu and the overclocker it came with. It only goes to a max of 1200 but I know it can go higher. I am guessing I need another kernel. What kernel can I use?
joshlete said:
Another really quick question. I want to overclock my phone. I tried using setcpu and the overclocker it came with. It only goes to a max of 1200 but I know it can go higher. I am guessing I need another kernel. What kernel can I use?
Click to expand...
Click to collapse
You either need a kernel with built in over clock support(you'd see the CPU slider go up to 1400-1600 automatically if it was). Or a kernel that supports over locking in tegrak, which you "load over clock module" with in tegrak.
Both Kuban kernel and some of Agats kernels have built in support, mine you need to use tegrak as I have not added built in yet
You can get them all in rwilco's (awesome) kernel repository stickied in development
Sent from my SPH-D710 using xda premium
So, I have flashed CWM Recovery and CWM Touch Recovery onto my Epic 4G Touch. Rom Manager says both are installed. However, when I boot into recovery, I get the stock recovery. I've searched and searched and all I have found are people who aren't pushing the right buttons and others with junk answers that are no help at all, like instructions on how to flash the recovery.
Even if I reflash using Rom Manager or any other recovery installer, it boots to the stock recovery. It's as if any changes to the file system are being completely ignored.
The weird thing is, if I flash StockCWM-EL26 or rogue_ET-recovery-1.2.2-FB27-rc0 using Odin/Mobile Odin and get to whichever one I flashed once, then either the phone won't boot at all or subsequent reboots result in the stock recovery once again.
To reiterate, I have *no* problem booting the phone and I have *no* problem getting to recovery... it's the wrong recovery, but still.
Oh, and I'm using HyDrA ROM.
Wrong forum. Report your post & ask mods to move your thread here.
MistahBungle said:
Wrong forum. Report your post & ask mods to move your thread here.
Click to expand...
Click to collapse
That forum is for the Epic 4G. My phone is not the Epic 4G, it is the Epic 4G Touch.
Try here then (doesn't belong here regardless).
WARNING do not use rom manager. Use odin or mobile odin. You have a high risk of bricking using rom manager. Take a look at some how-to's in this section.
sent from MY BAD A$$ ET4G
patrao_n said:
WARNING do not use rom manager. Use odin or mobile odin. You have a high risk of bricking using rom manager. Take a look at some how-to's in this section.
sent from MY BAD A$$ ET4G
Click to expand...
Click to collapse
^^^^^ this been there done that
patrao_n said:
WARNING do not use rom manager. Use odin or mobile odin. You have a high risk of bricking using rom manager. Take a look at some how-to's in this section.
sent from MY BAD A$$ ET4G
Click to expand...
Click to collapse
As I said, it either works once and never again or never at all no matter what I use to flash it.
Venum's Hydra rom? Wow, talk about a flash back..
Anyway, have you tried the el26 kernel one click?
No, but I don't imagine it would be any different than the Odin flash.
At any rate, I have an addendum. Flashing Rogue 1.2.2, the one that works - I can't get 1.5.0 to work at all (no boot, no recovery, only download mode), doesn't magically disappear, but it doesn't mount my external SD card and I can't open System Settings/Storage - I just can't win.
Would you mind listing the steps of flashing and items being flashed?
Only reason a custom won't stick is that you're flashing something behind it. In my mind at least..
First Time
<Download Mode>
Flash EL26 CWM Recovery - Phone no longer boots to OS. Can only get to CWM Recovery or Download Mode.
<Recovery Mode>
Wipe.
Flash HyDrA twice as per instructions.
Flash GApps.
Flash Multi-DPI Play Market while I'm at it.
Reboot.
Setup ROM.
Attempt to get to Recovery - got stock recovery.
Decided to try again without wiping. Same results.
Decided to try something:
<Download Mode>
Flash EL26 CWM Recovery - Phone no longer boots to OS. Can only get to CWM Recovery or Download Mode.
<Recovery Mode>
Made a NAND backup of /system and /data.
Flash HyDrA twice as per instructions.
Flash CWM Touch Recovery - Recovery takes effect immediately.
Restore the NAND backups.
Reboot.
Attempt to get to Recovery - got stock recovery.
Another thing:
<Download Mode>
Flash Rogue recovery.
Reboot.
Attempt to get to Recovery - got Rogue recovery - So far so good.
Flash CWM Touch Recovery - Recovery takes effect immediately.
Reboot.
Attempt to get to Recovery - got Rogue recovery - Interesting, but I can only access the external SD card from Recovery.
Flashed back to EL26.
Reinstalled HyDrA.
Restored the NAND backups.
(The Touch Recovery version is 5.8.1.5).
ROM Manager
Attempt to flash either CWM Recovery or CWM Touch Recovery.
Reboot.
Attempt to get to Recovery - got stock recovery.
Here is a list of my apps if you want that, too.
https://www.dropbox.com/s/k67l6mb294ruyug/apps-list.txt
I'm hesitant on trying anything else because it's a pain to restore it if I can't boot to the OS.
Just went back to Venums thread.
:edit: Briefly reading the thread, you'll need to have and AOSP kernel to run the Rom, so no, EL26 will not work.
:2d edit: This is out of the second post in that thread. - *If you are restoring a nandroid that you backed up via the above process, you will need to wipe cache and dalvik, then flash an AOSP ICS kernel or the ROM wont boot because it is backed up with the EL26 kernel. Then reboot.
Hydra comes with FD26 kernel. As per the OP.
I don't know, and haven't tested, if Hydra will run with EL26 cwm. But you need to add that to the last step.
But that's why you're going back to stock. It's part of the package.
Please, please, please; STOP using Rom Manager to flash a recovery.
I see a AOSP/TWRP repack by Times Infinity in the Kernel Repo that you could try, But I have not read the Hydra thread to see if Venum had tested this prior to discontinuing support.
egingell said:
No, but I don't imagine it would be any different than the Odin flash.
At any rate, I have an addendum. Flashing Rogue 1.2.2, the one that works - I can't get 1.5.0 to work at all (no boot, no recovery, only download mode), doesn't magically disappear, but it doesn't mount my external SD card and I can't open System Settings/Storage - I just can't win.
Click to expand...
Click to collapse
The easiest thing to do is find the EL29 auto boot recovery... goes straight into recovery after you flash it thru Odin.. check RWilco's repository
bilgerryan said:
The easiest thing to do is find the EL29 auto boot recovery... goes straight into recovery after you flash it thru Odin.. check RWilco's repository
Click to expand...
Click to collapse
From what I'm gathering from his OP, he wants to have a custom after flashing Hydra.. Gonna have to be an AOSP repack to run with a custom. I didn't really gather that until he listed the flashing steps he's doing.
MoHoGalore said:
I see a AOSP/TWRP repack by Times Infinity in the Kernel Repo that you could try, But I have not read the Hydra thread to see if Venum had tested this prior to discontinuing support.
Click to expand...
Click to collapse
I downloaded one, I haven't tried it.
I take it back, I did try it, but it wouldn't install. FF18 Rev2, for the record.
MoHoGalore said:
bilgerryan said:
The easiest thing to do is find the EL29 auto boot recovery... goes straight into recovery after you flash it thru Odin.. check RWilco's repository
Click to expand...
Click to collapse
From what I'm gathering from his OP, he wants to have a custom after flashing Hydra.. Gonna have to be an AOSP repack to run with a custom. I didn't really gather that until he listed the flashing steps he's doing.
Click to expand...
Click to collapse
Right. And I would have no problem just reflashing EL26 /w CWM if it would actually boot into the OS.
egingell said:
I downloaded one, I haven't tried it.
Right. And I would have no problem just reflashing EL26 /w CWM if it would actually boot into the OS.
Click to expand...
Click to collapse
Yeah, anything that's not an AOSP kernel/recovery isn't gonna work. So, if Time's aosp repack doesn't work, you'll have to run the included kernel.
MoHoGalore said:
Yeah, anything that's not an AOSP kernel/recovery isn't gonna work. So, if Time's aosp repack doesn't work, you'll have to run the included kernel.
Click to expand...
Click to collapse
Odin wouldn't install it, if that makes a difference. It's not that the install failed and I had to start over, again.
Well, since my touch isn't my daily use phone at the moment, I'll test that setup tonight.
I decided to try the One-Click of the FF18 v2 kernel and it flashed successfully.
However, as with Rogue, I only have no external SD card and no access to Settings/Storage. TWRP is pretty, but if I can't use my SD card, I'd rather use the stock kernel.
egingell said:
I decided to try the One-Click of the FF18 v2 kernel and it flashed successfully.
However, as with Rogue, I only have no external SD card and no access to Settings/Storage. TWRP is pretty, but if I can't use my SD card, I'd rather use the stock kernel.
Click to expand...
Click to collapse
My apologies on not getting back with you on this last night.
But the SD issue is also seen on the repacks with JB. Depending on when and how FF18 v2 was built (without source at the time?) could be similar to the issues with current repacks.
I'd have to refer those issues/questions to Agat or Garwynn..