Hi all, I'm new here (well, not to XDA) as I just purchased this phone 2 days ago. I love it so far. It's such and upgrade from my LG Optimus that I almost considered not rooting or flashing ROM's. Of course, I caved in last night.
Anyway, I have a couple questions regarding Odin and the process around flashing different kernels/modems, etc. Any help would be great. I successfully flashed Blue Kuban without issues as I'm familiar with CWM and all that great stuff.
1. Is there a good tutorial that I can use to do more research on Odin? I see there's a mobile version and a PC version, so I'm not sure which to use.
2. I see in some ROM's, the install instructions state to first flash a specific kernel with Odin. Is this to prevent bricks from flashing from ICS to ICS ROM's?
3. Hypothetically, if I wanted to switch from Blue Kuban to CM9 (or any other ICS ROM), couldn't I just restore my stock GB back up and then flash CM9 (or any other ICS ROM)? If not, what is the most user friendly method you use?
Thanks all, really glad I chose this phone, it looks like there's awesome development for it! Any help is greatly appreciated!
mjs2011 said:
Hi all, I'm new here (well, not to XDA) as I just purchased this phone 2 days ago. I love it so far. It's such and upgrade from my LG Optimus that I almost considered not rooting or flashing ROM's. Of course, I caved in last night.
Anyway, I have a couple questions regarding Odin and the process around flashing different kernels/modems, etc. Any help would be great. I successfully flashed Blue Kuban without issues as I'm familiar with CWM and all that great stuff.
1. Is there a good tutorial that I can use to do more research on Odin? I see there's a mobile version and a PC version, so I'm not sure which to use.
2. I see in some ROM's, the install instructions state to first flash a specific kernel with Odin. Is this to prevent bricks from flashing from ICS to ICS ROM's?
3. Hypothetically, if I wanted to switch from Blue Kuban to CM9 (or any other ICS ROM), couldn't I just restore my stock GB back up and then flash CM9 (or any other ICS ROM)? If not, what is the most user friendly method you use?
Thanks all, really glad I chose this phone, it looks like there's awesome development for it! Any help is greatly appreciated!
Click to expand...
Click to collapse
1. OK for Odin, you can try searching for a tutorial on qbkings YouTube channel. Basically all you need to know is that the PDA slot is for kernels and such where as phone slot is for modems. Only have auto reboot checked in top right settings. Mobile Odin works the same way. You can flash kernels from there and can save you time and when you're away from a computer. It currently has problems flashing modems however. There is a paid and lite version which you can find here in xda if you search a bit.
2. Yes this is to prevent bricking which has been happening when wiping data/factory rest in custom recoveries repackaged in ICS kernels. This is why its recommended to go back to el26 because this is the last true source (we don't have ICS source yet) we had.
Whenever changing roms, you must Odin/mobile Odin the el26 cwm kernel and do any rom flashing, restoring, backing up from there. So if you want to switch to CM9 from the ICS version of Blue Kuban I'm assuming, Odin el26 cwm kernel and flash cm9+gapps there.
Anymore questions let me know
Sent from my SPH-D710 using Tapatalk
Awesome, great info and I'll definitely pick up the mobile version. So it looks like I only need to flash the kernel, not actually flast a GB Rom?
The only other thing I'm wondering is if you recommend using the Rogue CWM Recovery. I have it installed right now. Are all ROMS compatible with this recovery?
Thanks again for your quick and helpful answer!
I personally use the rouge 1.4.1 kernel to do all my flashing. Rouge recovery is built from tweaking the cwm recovery. In essence, they are the same thing. Rouge has less "no's" and the menus are better organized, so I use it.
mjs2011 said:
Awesome, great info and I'll definitely pick up the mobile version. So it looks like I only need to flash the kernel, not actually flast a GB Rom?
The only other thing I'm wondering is if you recommend using the Rogue CWM Recovery. I have it installed right now. Are all ROMS compatible with this recovery?
Thanks again for your quick and helpful answer!
Click to expand...
Click to collapse
Yea all you need is the kernel. If you're on an ICS rom when you flash the el26 cwm kernel, it won't boot your phone but you can go into recovery still.
I really wouldn't recommend any custom recovery at this time for ICS. I mean it takes maybe an extra minute odining the el26 cwm kernel or so instead of directly booting into rogue recovery. From there you can flash mods, tweaks, etc and then just reflash a compatible ICS kernel. What do you really need rogue for? Not worth the risk IMO.
Sent from my SPH-D710 using Tapatalk
slick_rick said:
Yea all you need is the kernel. If you're on an ICS rom when you flash the el26 cwm kernel, it won't boot your phone but you can go into recovery still.
I really wouldn't recommend any custom recovery at this time for ICS. I mean it takes maybe an extra minute odining the el26 cwm kernel or so instead of directly booting into rogue recovery. From there you can flash mods, tweaks, etc and then just reflash a compatible ICS kernel. What do you really need rogue for? Not worth the risk IMO.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Interesting. I'll have to read up more regarding Odin. So I could literally open Odin and plug my phone in and then flash the el26 kernel and flash whatever ROM I want from Odin as well? Sorry, a little confused there. Just not sure how I'd flash a ROM without a custom recovery.
Thanks again, I'll also check out some tutorials. I'm guessing it will feel like 2nd nature in a week, just learning the new process.
The recovery is built into the kernel for this device. I use odin, flash the el29 rouge kernel v1.4.1, when the phone resets after the flash, boot into recover using volume up and power, wipe, flash, whatever you want, make sure you reinstall ics rom or kernel if you are on ics and reboot.
Ah, so if I flash the EL26 Kernel, will that overwrite my Rogue Recovery?
mjs2011 said:
Interesting. I'll have to read up more regarding Odin. So I could literally open Odin and plug my phone in and then flash the el26 kernel and flash whatever ROM I want from Odin as well? Sorry, a little confused there. Just not sure how I'd flash a ROM without a custom recovery.
Thanks again, I'll also check out some tutorials. I'm guessing it will feel like 2nd nature in a week, just learning the new process.
Click to expand...
Click to collapse
Well download whatever rom+mods/etc and put the files on your phone. Then just odin/mobile Odin the el26 cwm kernel and flash whatever you want from there, ICS or GB without no chance of a brick.
On our phone and I think most Samsung's for that matter, the recovery isnt separate from any other partition like with HTC. It must be packed into the kernel. So whenever you flash a rom, whatever recovery is packed in with that kernel included with the rom is what you're getting. Most devs are packing in stock Android recovery to cut down on bricks and instead recommend always flashing from el26 cwm kernel.
So yea that's what makes mobile Odin so great. Have el26 on your storage and you can switch roms very fast, easy, and safe.
Anymore questions just ask.
Edit: are you on GB or ICS Blue Kuban and what rogue also?
Sent from my SPH-D710 using Tapatalk
Thanks, really good info. I'm on Blue Kuban ICS right now with Rogue CWM 5.0.2.7. Looks like Odin will be a very easy way once I get comfortable with it.
So basically, I'll put the kernel zip in the PDA slot in Odin and let it do its thing, then my phone will auto reboot into the kernel's recovery where I can flash the ROM? Or do I flash the kernel in Odin, and also flash the ROM in Odin as well?
mjs2011 said:
Thanks, really good info. I'm on Blue Kuban ICS right now with Rogue CWM 5.0.2.7. Looks like Odin will be a very easy way once I get comfortable with it.
So basically, I'll put the kernel zip in the PDA slot in Odin and let it do its thing, then my phone will auto reboot into the kernel's recovery where I can flash the ROM? Or do I flash the kernel in Odin, and also flash the ROM in Odin as well?
Click to expand...
Click to collapse
Odin is just used to flash the safe el26 cwm kernel onto your phone. It will auto reboot and just hang at the Galaxy S II screen since the GB kernel can't boot an ICS rom so just power+volume up into it. Hold it for maybe up to 15 seconds but it'll come around. You then flash the rom in recovery from there. So put you rom files, etc on your phone before you Odin the kernel.
Sent from my SPH-D710 using Tapatalk
slick_rick said:
Odin is just used to flash the safe el26 cwm kernel onto your phone. It will auto reboot and just hang at the Galaxy S II screen since the GB kernel can't boot an ICS rom so just power+volume up into it. Hold it for maybe up to 15 seconds but it'll come around. You then flash the rom in recovery from there. So put you rom files, etc on your phone before you Odin the kernel.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
oh ok sweet. That sounds pretty easy, actually! LOL! One last question hopefully, do I need to extract the kernel zip or do I just place the zip in the PDA slot?
Thanks again for your help today. It really cleared a bunch of questions I had.
mjs2011 said:
oh ok sweet. That sounds pretty easy, actually! LOL! One last question hopefully, do I need to extract the kernel zip or do I just place the zip in the PDA slot?
Thanks again for your help today. It really cleared a bunch of questions I had.
Click to expand...
Click to collapse
Kernels flashed through PDA slot in Odin will be in either .tar or tar.md5 format, .zips are for cwm recovery only. You can find the el26 cwm kernel in the kernel repository sticky in dev section, its the first kernel listed. No problem, glad to help.
Sent from my SPH-D710 using Tapatalk
or u can use the 34gt auto
http://forum.xda-developers.com/showthread.php?t=1342728
Thanks again everyone. I successfully switched roms today with no issues.
Sent from my SPH-D710 using XDA
Related
Been running Blend from Team Noc for a bit and having a lot of core crashes, as well as some issues with notifications, etc. So I installed Blend 6.0 this morning and still had problems so wanted to try something else while those issues get fixed.
I went into recovery and this is a new recov I have never seen. It simply shows the android, then the following;
Android System Recovery <3e>
I was going to wipe using Caulk's and install another ICS ROM, so went to apply update from external storage (since that was the only option that made sense). Went to the folder they were, selected the format all and it took me back to the android guy on his back with a triangle!
So I am kinda stuck with this ROM unless I can get cqm back on (I guess). There are just so many threads that are out there, some old, some new, the sg2 has 5 flavors it seems based on the carrier (I am on sprint) so from what I can tell, it's the 4G touch.
Thanks to all read/replies.
use odin, instructions here
http://forum.xda-developers.com/showthread.php?t=1609255
Just use mobile odin and select the tar file w/recovery. You tried to boot into recovery without a recovery installed which is why it looked funny.
Thanks guys. I followed the 1st post (as I didn't see the 2nd) and ran the step's using a windows machine. Odin saw the device, flashed it, all green, success, and restarted.
Followed up with the quick root/CWM app and worked like a charm. I am back to square one now, did install Venum Ice RC3.1.1 which looked pretty clean, but 1st thing I noticed was anything that uses the media card doesn't work (camera for example). You hit it, returns you to the app drawer.
So, with what's out there right now, what seems to be the most stable with the basic's, (phone, data, camera, etc.)
Thanks again, was well worth the wait to do it correctly!
I've been using CM9A3 as my everyday from. Solid as a rock. I have 0 issue.
Sent from my SPH-D710 using XDA
I'd say it was official if I did not know any better.
Sent from my SPH-D710 using XDA
I am also on Team Noc's The Goodness Version 6 without a custom recovery, and have a similar question. In that thread they were discussing using Odin to flash a kernel with CM, and they posted two kernals one that is the FD02 (ICS) and the other is EL29 (GB). I am currently on an ICS rom that works with the newly flashed FD02 kernal. However, my question is while on ICS can I odin to the GB recovery kernal so that I can flash a different GB rom? I am nervous to try because I have heard of people bricking going from ICS to GB, but if this works it would make my life easier as a flashaholic
Mastershake725 said:
I am also on Team Noc's The Goodness Version 6 without a custom recovery, and have a similar question. In that thread they were discussing using Odin to flash a kernel with CM, and they posted two kernals one that is the FD02 (ICS) and the other is EL29 (GB). I am currently on an ICS rom that works with the newly flashed FD02 kernal. However, my question is while on ICS can I odin to the GB recovery kernal so that I can flash a different GB rom? I am nervous to try because I have heard of people bricking going from ICS to GB, but if this works it would make my life easier as a flashaholic
Click to expand...
Click to collapse
Use Mobile Odin to flash EL26+cwm kernel( http://db.tt/0QJkleJR ), hold volume^+power to boot into cwm wipe data/factory reset, wipe cache, wipe dalvick, flash rom, flash gapps, and reboot. People brick from using a ICS recovery to go back from certain ROMs. EL26+cwm is always the safest choice to flash with.
Sent from my SPH-D710 using Tapatalk 2 Beta-5
Mastershake725 said:
I am also on Team Noc's The Goodness Version 6 without a custom recovery, and have a similar question. In that thread they were discussing using Odin to flash a kernel with CM, and they posted two kernals one that is the FD02 (ICS) and the other is EL29 (GB). I am currently on an ICS rom that works with the newly flashed FD02 kernal. However, my question is while on ICS can I odin to the GB recovery kernal so that I can flash a different GB rom? I am nervous to try because I have heard of people bricking going from ICS to GB, but if this works it would make my life easier as a flashaholic
Click to expand...
Click to collapse
Yes you can mobile odin the el26 repack with cwm (not the rogue one) I believe its still at the top of the Nocturnal Venum rom thread. Flash in cwm and as it boots hold down the volume and power buttons. It should boot into the blue cwm. Flash whatever you want. Or mobile odin the el26 repack cwm and as it reboots hold the same buttons down to boot into recovery and flash away. El29 doesnt have a cwm repack (its rogue and not what you need). Keep in mind that mobile odin WILL NOT flash modem so dont try it.
Edit: The post above says basically the same thing. DO NOT use el29 kernel. Just reminding you...
VeNuM said:
Yes you can mobile odin the el26 repack with cwm (not the rogue one) I believe its still at the top of the Nocturnal Venum rom thread. Flash in cwm and as it boots hold down the volume and power buttons. It should boot into the blue cwm. Flash whatever you want. Or mobile odin the el26 repack cwm and as it reboots hold the same buttons down to boot into recovery and flash away. El29 doesnt have a cwm repack (its rogue and not what you need). Keep in mind that mobile odin WILL NOT flash modem so dont try it.
Edit: The post above says basically the same thing. DO NOT use el29 kernel. Just reminding you...
Click to expand...
Click to collapse
Thanks for the quick response! Just a clarification, I do have the el26+CWM (el29 was a typo). Lets say I want to leave ICS for another rom, and a use mobile odin to go back to el26 and accidentally boot into my ICS sandwich rom. Is there any potential risk of bricking there? Also, what is the significance of flashing a modem? I already have an EL29 modem and I am happy with the current setup, do most roms/kernals have baked in modems? And if so should I avoid them when using odin?
Mastershake725 said:
Thanks for the quick response! Just a clarification, I do have the el26+CWM (el29 was a typo). Lets say I want to leave ICS for another rom, and a use mobile odin to go back to el26 and accidentally boot into my ICS sandwich rom. Is there any potential risk of bricking there? Also, what is the significance of flashing a modem? I already have an EL29 modem and I am happy with the current setup, do most roms/kernals have baked in modems? And if so should I avoid them when using odin?
Click to expand...
Click to collapse
You can't boot into a ICS ROM on el26 it is a GB kernel. Every ROM I have used has baked in kernel but no modem. Any modem for e4gt will work with any ROM. Kernels are GB and ICS specific.
Edit:el26+cwm is juts safer to flash ICS ROMs/kernels. When you flash a ROM it will replace the kernel. Just use mobile odin to flash back to el26+cwm to flash new ROMs/modems(wiping like usuall). If changing modem just flash el26+cwm, wipe cache/dalvik, flash modem of choice, and flash ICS kernel of choice. Reboot.
Sent using Tapatalk 2 Beta-5 on AOKP 32 ROM
killaphatboy said:
You can't boot into a ICS ROM on el26 it is a GB kernel. Every ROM I have used has baked in kernel but no modem. Any modem for e4gt will work with any ROM. Kernels are GB and ICS specific.
Edit:el26+cwm is juts safer to flash ICS ROMs/kernels. When you flash a ROM it will replace the kernel. Just use mobile odin to flash back to el26+cwm to flash new ROMs/modems(wiping like usuall). If changing modem just flash el26+cwm, wipe cache/dalvik, flash modem of choice, and flash ICS kernel of choice. Reboot.
Sent using Tapatalk 2 Beta-5 on AOKP 32 ROM
Click to expand...
Click to collapse
Thanks for the tips that makes a lot of sense! I am gaining confidence of going between ICS & GB. Now is it the same process for roms like AOKP, MIUI, and CM7/9? I have heard they also need specific recoveries to operate correctly.
Yes, el26cwm only and they only use aosp kernels. I believe T.C.P. has them on one of his threads.
Sent on Slim-n-Trim 1.9 using Tapatalk 2
I know this is a silly question, but Ive Googled and searched here on XDA and no luck.
Every AOSP based ROM says to flash EL26 kernel in order to flash the ROM (CM9, AOKP, CNA). I already have AOKP installed.
Traditionally, I just use Sfhubs EL26 one-click, then I will install CWM via Sfhubs Autoroot, boot into recovery, then I'll flash.
My question is, can I just flash the EL26 kernel (via Odin because I am on ICS ROMs) instead of that whole lengthy process I just described above? In other words, is it safe to have a Gingerbread/EL26 kernel on top of an ICS rom just so I can use CWM to flash another ICS ROM?
I understand my original, longer method is much safer. Just curious.
Also: what is the obsession with the EL26 kernel? It was never even an OTA build, why do all developers check for EL26?
Sorry for the noob questions. Thanks in advance.
rpnunez said:
I know this is a silly question, but Ive Googled and searched here on XDA and no luck.
Every AOSP based ROM says to flash EL26 kernel in order to flash the ROM (CM9, AOKP, CNA). I already have AOKP installed.
Traditionally, I just use Sfhubs EL26 one-click, then I will install CWM via Sfhubs Autoroot, boot into recovery, then I'll flash.
My question is, can I just flash the EL26 kernel (via Odin because I am on ICS ROMs) instead of that whole lengthy process I just described above? In other words, is it safe to have a Gingerbread/EL26 kernel on top of an ICS rom just so I can use CWM to flash another ICS ROM?
I understand my original, longer method is much safer. Just curious.
Also: what is the obsession with the EL26 kernel? It was never even an OTA build, why do all developers check for EL26?
Sorry for the noob questions. Thanks in advance.
Click to expand...
Click to collapse
You are safe flashing the EL26 CWM kernel through Odin. There's no need to return to an actual GB ROM with every flash. However, I'd suggest investing in Mobile Odin to make the process easier.
The reason everyone insists in EL26 is that it is the original custom recovery for our phones and us also the safest.
Good luck!
Mobile odin is the way to go, it's what I use it won't boot rom just into recovery and wipe and flash away. It's on the market and so is the link to the free one. You also need to install the flash apk if you use the fee one both are here on xda.
Sent from my SPH-D710 using XDA
Please make sure you are using the recommended StockCWM-EL26.TAR file found here:
http://chris41g.devphone.org/index.php?dir=EpicTouch/Stock+Repack/EL26/
This kernel uses the STOCK cwm recovery. There has been a lot of concern about using any of the other repacked recoveries so this one has been deemed safe where ICS is involved.
Like the other user said, using ODIN (mobile or PC based) is far easier than using the one click root (which takes like 20-30 minutes each time).
You guys are all awesome. Really answered all my questions. Thanks to you all. !!!
What if I am on an ICS rom and I want to do a nandroid restore back to a gingerbread rom? Can I just flash the el26 kernal then go and do the restore? Also just to double check i put the kernal in the pda slot of odin correct?
rbtrucking said:
What if I am on an ICS rom and I want to do a nandroid restore back to a gingerbread rom? Can I just flash the el26 kernal then go and do the restore? Also just to double check i put the kernal in the pda slot of odin correct?
Click to expand...
Click to collapse
That's what they say.
But I love my phone too much and I'm kinda paranoid about it so I do it the original way and use Sfhub one-click back to Gingerbread, then I restore the nandroid.
As far as which slot to use, I usually refer to this just to be safe if I can't remember:
http://forum.xda-developers.com/showthread.php?t=1274337
Somewhere on that OP it tells you what the slots are used for too:
•PIT Button: This is for the partition structure when flashing an entire ROM
•BOOTLOADER Button: This is for uploading a new bootloader (we don't have, and have never used this - IGNORE!)
•PDA Button: This is for flashing kernels and ROMs (in .tar format)
•PHONE Button: This is for the phone's RADIO/MODEM ONLY!!!!!!
•CSC Button: Not sure - don't use.
tdunham said:
That's what they say.
But I love my phone too much and I'm kinda paranoid about it so I do it the original way and use Sfhub one-click back to Gingerbread, then I restore the nandroid.
As far as which slot to use, I usually refer to this just to be safe if I can't remember:
http://forum.xda-developers.com/showthread.php?t=1274337
Somewhere on that OP it tells you what the slots are used for too:
•PIT Button: This is for the partition structure when flashing an entire ROM
•BOOTLOADER Button: This is for uploading a new bootloader (we don't have, and have never used this - IGNORE!)
•PDA Button: This is for flashing kernels and ROMs (in .tar format)
•PHONE Button: This is for the phone's RADIO/MODEM ONLY!!!!!!
•CSC Button: Not sure - don't use.
Click to expand...
Click to collapse
Thank you I love ICS but it might be too buggy at the moment. Half the time my capacitive keys dont light up I cant send or receive picture messages and I cant acess my sd card when I connect the phone to the pc
rbtrucking said:
Thank you I love ICS but it might be too buggy at the moment. Half the time my capacitive keys dont light up I cant send or receive picture messages and I cant acess my sd card when I connect the phone to the pc
Click to expand...
Click to collapse
I've been hearing more and more about the MMS problem. I don't use it much so everything is working fine for me as far as I can tell. But, it's nice when it ALL works.
rbtrucking said:
Thank you I love ICS but it might be too buggy at the moment. Half the time my capacitive keys dont light up I cant send or receive picture messages and I cant acess my sd card when I connect the phone to the pc
Click to expand...
Click to collapse
As far as the mms issue have you tried the fix out there. Also I believe sfhub has a fix for your sdcard showing up when you connect to a pc as part of his 1-click. I am on Codename now and I do not have any of these issues you speak of fortunately. Actually everything I need the rom for works quite well
I have combed through the entire thread (☼[ROM] Frankenstein's Ego 4.5 (FE16 ICS)(S Voice Patch)☼ 5/21/2012) and i did NOT find my answer, in fact, i saw two posts discussing something similar, but it didn't seem to help my situation at all.
Anywho. I am LOVING this ROM, but I seem to have lost CWM? I rooted, flashed CWM, then i bought Mobile Odin to flash the EL26_StockCWM Kernel, did that successfully. I then watched QBKing77's video to install Ego (PS - i watch his videos EVERY TIME i'm doing something to my phone, they are AMAZING.) And ta da! I'm running the rom
But then I wanted to put the Rapps on and the S_Voice_Patch_v4, and I couldn't find anywhere in that thread on WHEN i'm supposed to do this (yes, as i said, i combed through the thread) so I thought, well let's flash through CWM. But I don't HAVE CWM anymore. Now I have Android system recovery? When I try to install zip from there, it errors out because of signatures. So what should I do? Should I flash back the EL26 Stock Kernel, flash the two patches, and then flash the FE16 kernel?
I'm so lost, please be kind!
I'm pretty syre I put this in the thread before but no worries we're here to help.
1. ODIN/mobile ODIN el26 w/CWM
2. Flash ROM in CWM
3. Flash Rapps
4. Flash S-voice Patch
5. Reboot and enjoy
All you have to do now though since you flashed the ROM is:
1. DL the FE16 + Kernel (Or whatever kernel you prefer)
2. ODIN/mobil ODIN el26 CWM
3. Flash Rapps
4. Flash s-voice patch
5. Flash kernel
6. Reboot and enjoy
You will always lose CWM on all ICS Kernels as I do not know of any that contain CWM. I know there is an ACS kernel out there with there recovery but that's it, no CWM. I hope this helps
danidiva said:
I have combed through the entire thread (☼[ROM] Frankenstein's Ego 4.5 (FE16 ICS)(S Voice Patch)☼ 5/21/2012) and i did NOT find my answer, in fact, i saw two posts discussing something similar, but it didn't seem to help my situation at all.
Anywho. I am LOVING this ROM, but I seem to have lost CWM? I rooted, flashed CWM, then i bought Mobile Odin to flash the EL26_StockCWM Kernel, did that successfully. I then watched QBKing77's video to install Ego (PS - i watch his videos EVERY TIME i'm doing something to my phone, they are AMAZING.) And ta da! I'm running the rom
But then I wanted to put the Rapps on and the S_Voice_Patch_v4, and I couldn't find anywhere in that thread on WHEN i'm supposed to do this (yes, as i said, i combed through the thread) so I thought, well let's flash through CWM. But I don't HAVE CWM anymore. Now I have Android system recovery? When I try to install zip from there, it errors out because of signatures. So what should I do? Should I flash back the EL26 Stock Kernel, flash the two patches, and then flash the FE16 kernel?
I'm so lost, please be kind!
Click to expand...
Click to collapse
Yea, you have to re-flash EL26 kernel then flash what you want then reflash the FE16 or 20 kernel and then reboot
CWM won't work most proper till we have kernel source
stormglove said:
I'm pretty syre I put this in the thread before but no worries we're here to help.
1. ODIN/mobile ODIN el26 w/CWM
2. Flash ROM in CWM
3. Flash Rapps
4. Flash S-voice Patch
5. Reboot and enjoy
All you have to do now though since you flashed the ROM is:
1. DL the FE16 + Kernel (Or whatever kernel you prefer)
2. ODIN/mobil ODIN el26 CWM
3. Flash Rapps
4. Flash s-voice patch
5. Flash kernel
6. Reboot and enjoy
You will always lose CWM on all ICS Kernels as I do not know of any that contain CWM. I know there is an ACS kernel out there with there recovery but that's it, no CWM. I hope this helps
Click to expand...
Click to collapse
AJC9000 said:
Yea, you have to re-flash EL26 kernel then flash what you want then reflash the FE16 or 20 kernel and then reboot
CWM won't work most proper till we have kernel source
Click to expand...
Click to collapse
Thank you guys so much for replying so quickly! I kind of thought that's what I might have to do, but i didn't wanna go around flashing kernels without knowing for sure that's what i was supposed to do. I really appreciate your help!!!!
danidiva said:
Thank you guys so much for replying so quickly! I kind of thought that's what I might have to do, but i didn't wanna go around flashing kernels without knowing for sure that's what i was supposed to do. I really appreciate your help!!!!
Click to expand...
Click to collapse
Just don't shoot yer eye out and you'll b good
ok one more question - the repacked kernel on the Frankenstein post is a .zip file, so Mobile Odin doesn't pull it. Is there something I should do with that file or should I just pull a kernel from this thread? [KERNELS][CWM][ODIN] Kernel Repository - Download Them All Here
And if so, which one?
AJC9000 said:
Just don't shoot yer eye out and you'll b good
Click to expand...
Click to collapse
it's so tempting tho!
danidiva said:
ok one more question - the repacked kernel on the Frankenstein post is a .zip file, so Mobile Odin doesn't pull it. Is there something I should do with that file or should I just pull a kernel from this thread? [KERNELS][CWM][ODIN] Kernel Repository - Download Them All Here
And if so, which one?
Click to expand...
Click to collapse
he repacked kernels are all zips, you Odin the el26 CWM kernels and flash all other kernels after.
stormglove said:
he repacked kernels are all zips, you Odin the el26 CWM kernels and flash all other kernels after.
Click to expand...
Click to collapse
Okay, thanks. sorry, just never want to assume!
EDIT: and now I see that you said "FLASH kernel" *sigh* sorry!!
danidiva said:
ok one more question - the repacked kernel on the Frankenstein post is a .zip file, so Mobile Odin doesn't pull it. Is there something I should do with that file or should I just pull a kernel from this thread? [KERNELS][CWM][ODIN] Kernel Repository - Download Them All Here
And if so, which one?
Click to expand...
Click to collapse
the FE16 repack zip?
Flash that after you patch up everything in CWM then reboot don't worry about unzipping it
Okay, so I tried to Mobile Odin the EL26 Stock CWM and it said it flashed, but then it didn't reboot. I was going through the Odin thread where someone else had this problem, so they force stopped the app and rebooted manually, and it worked. Well, i did that, and now I'm stuck on the Samsung Galaxy boot up screen. I pulled the battery, and put it into recovery mode, and there was CWM, but it wouldn't install the files (said they were bad). tried to restart the phone again, and back to the Samsung Galaxy screen.
Did i f*** it all up?!
danidiva said:
Okay, so I tried to Mobile Odin the EL26 Stock CWM and it said it flashed, but then it didn't reboot. I was going through the Odin thread where someone else had this problem, so they force stopped the app and rebooted manually, and it worked. Well, i did that, and now I'm stuck on the Samsung Galaxy boot up screen. I pulled the battery, and put it into recovery mode, and there was CWM, but it wouldn't install the files (said they were bad). tried to restart the phone again, and back to the Samsung Galaxy screen.
Did i f*** it all up?!
Click to expand...
Click to collapse
your probably either going to have to odin from pc, or redownload the rom/kernel files to your sd card and flash from sd thru cwm if it says the files are bad. What is the exact error cwm is giving you? as long as you make sure you are using el26 cwm to flash ics roms you will be fine and wont brick.
Success100 said:
your probably either going to have to odin from pc, or redownload the rom/kernel files to your sd card and flash from sd thru cwm if it says the files are bad. What is the exact error cwm is giving you? as long as you make sure you are using el26 cwm to flash ics roms you will be fine and wont brick.
Click to expand...
Click to collapse
Well I'm already on the ICS rom. i was trying to load the patches (S Voice and Rapps). it says:
E:Can't open /sdcard/Rapps_RemovedAppsV4.zip (bad)
But the other issue is that my phone is stuck in the bootloop of the Samsung Galaxy screen. So even tho I'm on CWM right now, nothing else is working.
Sounds like bad downloads of the files getting that error in CWM. For some reason FE16 does not reboot when Mobile odin is run so for future reference just flash it and manually reboot into CWM. If both of you have CWM you are still good, just flash the FE16 Kernel and should boot back to ROM and you can retry after redownloading the files. If you cannot get to CWM you might have to PC Odin. Sorry this didn't work for you guys. hopefully we can get you up and running.
stormglove said:
Sounds like bad downloads of the files getting that error in CWM. For some reason FE16 does not reboot when Mobile odin is run so for future reference just flash it and manually reboot into CWM. If both of you have CWM you are still good, just flash the FE16 Kernel and should boot back to ROM and you can retry after redownloading the files. If you cannot get to CWM you might have to PC Odin. Sorry this didn't work for you guys. hopefully we can get you both up and running.
Click to expand...
Click to collapse
Okay PHEW! I flashed the FE16 Kernel and it booted back up, so I'm gonna do what you suggested and re-download the files and whatnot.
(PS - i'm the same user as the OP, i just added a pic, sorry for the confusion LOL)
yeah I realized that after i posted, haha.
WOOOOOO! Okay, I'm good! Thank you everyone! I've got the patches, the FE16 and i'm flying through this rom!
I love when people help people, thanks guys :beer:
Sent from my SPH-D710 using XDA
heres anorher way to do it. extract the zimage inside the zip of the kernel. now use mobile odin to flash rhe zimage and all is well. i recommend calkulins fe22 kernel becuzz it has rogue recovery which basically is cwm recovery
Sent from my SPH-D710 using xda premium
Back around may i flashed my gf's gs2 to ics akop and it was an ordeal with odin and recovery and whatnot. At the time my friend had one too and helped walk me through it, but hes moved onto the gs3. Im used to htcs where i just need to flash a recovery and rom and im good to go, and i see some talk of safe recovery so it looks like things have gotten better. Shes having all kinds of problems with this akop build and id like to get her on something new, hopefully something cm10 based, but have no idea what all that entails. It looks like her kernel is fe07, if someone could let me know what i need to do to get her on a better rom id greatly appreciate it
Us in mobile Odin or desktop Odin to flash a kernel. I would highly recommend el26+cwm5 its a kernel with recovery built in because that's how our phone does the recovery. After you have el26 kernel installed it won't boot. Its OK. This just means you have an ics rom trying to use a gb kernel. Just push and hold both the power button and volume up until you get in recovery. This is the safest kernel to flash from. Then once in recovery go ahead and flash your cm10.
Things you will need.
1. el26kernel with cwm5.
2. Rom you want to flash.
3. Either mobile Odin by chain fire or desktop Odin with drivers already installed.
4. Calkulins format all.zip is highly recommended to use so you don't have traces of hour last rom messing things up.
sent from my BAD A$$ Epic touch
Thanks for the detail. So with having a gb kernel whats going to allow it to boot once i install cm10? Once cm is installed, do i have to go through that whole process again to flash another rom if i want?
kellybrf said:
Thanks for the detail. So with having a gb kernel whats going to allow it to boot once i install cm10? Once cm is installed, do i have to go through that whole process again to flash another rom if i want?
Click to expand...
Click to collapse
Cm10 should have a safe recovery, but you can if you want to be doubly sure. When you install cm it will have the jb kernel with it so all you have to do is rom gapps and boot. Highly recommend mobile Odin for going to el26 recovery because it makes it soo much faster and easier.
When you flash a rom from that el26 kernel, it will be overwritten. The kernel is packed into the rom. So by flashing cm10 you will now have a new kernel.
sent from my BAD A$$ Epic touch
I need some tips on flashing EL26 or EL29 recovery kernals from GB27 rom.
When flashed (odin, mobile odin, and zip) my phone gets stuck on the first Samsung E4GT logo. No recovery is added, volume up and power only reboots device to same logo.
Ive done this flash before and never had an issue. I dont know what could be the issue.
Would flashing a stock GB or ICS rom and pretty much starting from scratch be a good idea?
I guess my question is are there issues with flashing from GB27 to EL26/29? Do I need to be on a specific kernal? My only fear is if I flash a stock GB rom I wont have a kernal to flash anything else.
Could there be something wrong with my phone? It really seems to me flashing from my current rom isnt compatable.
Please send me some tips and advice on what roms to flash to get back to an el26 so I can proceed with my goal in all this which is flashing the new SHOstock rom with multi window.
Thank you and I appreciate any help!
Sent from my SPH-D710 using xda app-developers app
It wouldn't hurt starting from scratch. It sounds like your current Rom is having some sort of conflict with the EL26/EL29 CWM kernels. Have you tried flashing a gb27 cwm recovery? That will allow you to flash a new rom. They are stable as dd's now and I use them all the time. Try Garwynn or Agat's gb27, they both come with Agat's custom recovery which has cwm. If that doesn't take, might as well save all your important stuff and give a fresh start a try . Good luck.
Sent from my SPH-D710BST using xda premium
I have agats gb27 loaded and can flash from it. I need chris 44g el26 or 29 kernel to flash a specific rom. Rom does not load correctly in agats. Many people had issues and per instructions, user 26/29. I will try to start from scratch.
Sent from my SPH-D710 using xda app-developers app
You can use the stock rooted restore gb08 that's what I used to fix that problem. Try following ny guide to get it running perfect after you Odin the stock rooted.
Sent from my SPH-D710 using Tapatalk 4
FuMMoD said:
You can use the stock rooted restore gb08 that's what I used to fix that problem. Try following ny guide to get it running perfect after you Odin the stock rooted.
Sent from my SPH-D710 using Tapatalk 4
Click to expand...
Click to collapse
I gave flashing stock GB08 rooted a shot. I then flashed EL29 and EL26. Still does the same thing.
Doesnt boot to CWM.
If I flash a Gingerbread rom, since my EL26/29 isnt working, will I be able to access my current GB27 state I am in now without issue?
My AGAT GB27 is doing me well to retrieve all my current backups.
I dont want to go back to Gingerbread and not have a recovery to use because it uses EL26/29. So I would be screwed, correct?
Thanks!
I am trying to flash EL29 Gingerbread Stock Rom with Root.
This doesnt work as well. Odin freezes on the flash at FactoryFS.img.
Does anyone know why it would freeze on this file?
I've tried multiple tar files, different ports, different cords, two versions of odin.
I let it sit for 30 minutes and nothing. What caused the factoryfs.img file to freeze?
What hardware in the phone could cause this issue?
Any help wouldbe appreciated. All I want is EL26/[email protected]#$ WHYYYY!
If you flash el26 or 29 over ICS or JB your phone will not boot past splash screen. I always use el26 with odin from PC, kernel is flashed from pda slot. Reboot the phone and hold then keep holding power +vol up for like 30 seconds and you will boot into el26 recovery.
If you want to switch from from Touchwiz JB to AOSP or older GB/ICS rom you need to flash a ICS 1 click first like FI27 then flash el26 kernel and flash rom. If you are trying to flash the rooted el29 one click rom it should work. Maybe bad cable. I only flash with blackberry microusb cables.
el26 el29
IM stuck in flash screen. I have el26/el29 in tar.md5 I need them in zip format to flash on Odin. I don't have computer access. Stock cwm-El26.tar and El29 direct boot cwm.tar ?? Any way to get them in zip so I can flash in Odin.
Rehv said:
IM stuck in flash screen. I have el26/el29 in tar.md5 I need them in zip format to flash on Odin. I don't have computer access. Stock cwm-El26.tar and El29 direct boot cwm.tar ?? Any way to get them in zip so I can flash in Odin.
Click to expand...
Click to collapse
You are confused my friend. Odin uses .tar or .tar.md5 files and CWM recovery uses .zip files. And if you're stuck at splash screen after flashing el29 it's because you can't boot el26 or el29 unless you have that build rom on your phone. They are used for recovery only. Pull battery, reinsert, reboot into recovery, and flash the rom of your choice from there!(e4gt only of course)
Sent from my SPH-L710 using XDA Premium 4 mobile app
Ok I will try that. I flashed the el26 then flash flashed jb_28_ 2x.zip and it put me in Android system recovery<3e> gonna post a pic.thank u for it help.
This is what I see now.
Rehv said:
This is what I see now.
Click to expand...
Click to collapse
Did you get everything sorted out?
Sent from my SPH-L710 using Tapatalk
It looks like the situation I was in last time, I most likely know how to fix that?
? Powered By My Moga Pro ?
I never got it fixed. Bought a HTC one sv boost mobile. Thinking about trying to root it. But got to do my reading first don't want to brick this one. Sorry for late response.