Related
I have a question:
I'm presently runningthe Nocturnal Venum AOKP rom (which is awesome
I might add) but this question actually has impications on all the
ICS 4.03 & 4.04 roms. After Flashing the rom and whatever else you
flash through the EL26 CWM(5.027) based kernel and rebooting you
loose that CWM and must get CWM from the Play Store.
My question is this; Say I want to flash a new modem must I Odin
the EL26 kernel http://forum.xda-developers.com/showthread.php?t=1514665
using the method per kbizzle and then flash new modem and reflash
ICS kernel? This is important to know as the only unrecoverable brick I
have manufactured is with the flashing that goes between gingerbread
based recovery to ICS rom and attenpting to go back. I admit I'm a 50
something year old noob with building pc's as my experience before
getting into the android game so I wont pretend I'm something I'm
not! I have flased better than 100 roms and am learning more with
each possible bricking roll of the dice flashing I do and I have
bricked my share. Is their a CWM in the works for flashing modems
and so on in the works? Any help will be greatly appreciated!
to flash a modem, simply flash the .bin file in Odin. no need to use recovery and it doesn't add to the Odin count.
DO NOT USE CWM FROM THE PLAY STORE!!!!
Odin el26 cwm, clear dalvik cache, flash whatever mod you're wanting to flash, flash AOSP ICS kernel, reboot.
worked like a charm
I was having the same problem flashing modems on Nocturnal Venum. Didnt know we had to flash the kernel along with it. Needless to say working great now
It would be in your best interest to flash using ODIN. You won't have to go back to a GB kernel to flash a modem with ODIN.
You can flash with CWM, but I wouldn't in the AOKP/AOSP situation you're in.
Flashing new ICS modem
OK cnstarz,
That's what I needed to know and appreciate your prompt response! You raise another question which is was using or wanting to use CWM for nandroid backup but as it wouldn't flash modem, the nandroid backup is also out of the question. I plan on using the rom I'm on now as a daily driver but like to try others out and know that I have to basically Odin back to gingerbread to either try another gingerbread rom or to do another ICS rom. So, my guess is I have no nandroid option or is there?
Again thanks for your help.
Hi all, I'm new here (well, not to XDA) as I just purchased this phone 2 days ago. I love it so far. It's such and upgrade from my LG Optimus that I almost considered not rooting or flashing ROM's. Of course, I caved in last night.
Anyway, I have a couple questions regarding Odin and the process around flashing different kernels/modems, etc. Any help would be great. I successfully flashed Blue Kuban without issues as I'm familiar with CWM and all that great stuff.
1. Is there a good tutorial that I can use to do more research on Odin? I see there's a mobile version and a PC version, so I'm not sure which to use.
2. I see in some ROM's, the install instructions state to first flash a specific kernel with Odin. Is this to prevent bricks from flashing from ICS to ICS ROM's?
3. Hypothetically, if I wanted to switch from Blue Kuban to CM9 (or any other ICS ROM), couldn't I just restore my stock GB back up and then flash CM9 (or any other ICS ROM)? If not, what is the most user friendly method you use?
Thanks all, really glad I chose this phone, it looks like there's awesome development for it! Any help is greatly appreciated!
mjs2011 said:
Hi all, I'm new here (well, not to XDA) as I just purchased this phone 2 days ago. I love it so far. It's such and upgrade from my LG Optimus that I almost considered not rooting or flashing ROM's. Of course, I caved in last night.
Anyway, I have a couple questions regarding Odin and the process around flashing different kernels/modems, etc. Any help would be great. I successfully flashed Blue Kuban without issues as I'm familiar with CWM and all that great stuff.
1. Is there a good tutorial that I can use to do more research on Odin? I see there's a mobile version and a PC version, so I'm not sure which to use.
2. I see in some ROM's, the install instructions state to first flash a specific kernel with Odin. Is this to prevent bricks from flashing from ICS to ICS ROM's?
3. Hypothetically, if I wanted to switch from Blue Kuban to CM9 (or any other ICS ROM), couldn't I just restore my stock GB back up and then flash CM9 (or any other ICS ROM)? If not, what is the most user friendly method you use?
Thanks all, really glad I chose this phone, it looks like there's awesome development for it! Any help is greatly appreciated!
Click to expand...
Click to collapse
1. OK for Odin, you can try searching for a tutorial on qbkings YouTube channel. Basically all you need to know is that the PDA slot is for kernels and such where as phone slot is for modems. Only have auto reboot checked in top right settings. Mobile Odin works the same way. You can flash kernels from there and can save you time and when you're away from a computer. It currently has problems flashing modems however. There is a paid and lite version which you can find here in xda if you search a bit.
2. Yes this is to prevent bricking which has been happening when wiping data/factory rest in custom recoveries repackaged in ICS kernels. This is why its recommended to go back to el26 because this is the last true source (we don't have ICS source yet) we had.
Whenever changing roms, you must Odin/mobile Odin the el26 cwm kernel and do any rom flashing, restoring, backing up from there. So if you want to switch to CM9 from the ICS version of Blue Kuban I'm assuming, Odin el26 cwm kernel and flash cm9+gapps there.
Anymore questions let me know
Sent from my SPH-D710 using Tapatalk
Awesome, great info and I'll definitely pick up the mobile version. So it looks like I only need to flash the kernel, not actually flast a GB Rom?
The only other thing I'm wondering is if you recommend using the Rogue CWM Recovery. I have it installed right now. Are all ROMS compatible with this recovery?
Thanks again for your quick and helpful answer!
I personally use the rouge 1.4.1 kernel to do all my flashing. Rouge recovery is built from tweaking the cwm recovery. In essence, they are the same thing. Rouge has less "no's" and the menus are better organized, so I use it.
mjs2011 said:
Awesome, great info and I'll definitely pick up the mobile version. So it looks like I only need to flash the kernel, not actually flast a GB Rom?
The only other thing I'm wondering is if you recommend using the Rogue CWM Recovery. I have it installed right now. Are all ROMS compatible with this recovery?
Thanks again for your quick and helpful answer!
Click to expand...
Click to collapse
Yea all you need is the kernel. If you're on an ICS rom when you flash the el26 cwm kernel, it won't boot your phone but you can go into recovery still.
I really wouldn't recommend any custom recovery at this time for ICS. I mean it takes maybe an extra minute odining the el26 cwm kernel or so instead of directly booting into rogue recovery. From there you can flash mods, tweaks, etc and then just reflash a compatible ICS kernel. What do you really need rogue for? Not worth the risk IMO.
Sent from my SPH-D710 using Tapatalk
slick_rick said:
Yea all you need is the kernel. If you're on an ICS rom when you flash the el26 cwm kernel, it won't boot your phone but you can go into recovery still.
I really wouldn't recommend any custom recovery at this time for ICS. I mean it takes maybe an extra minute odining the el26 cwm kernel or so instead of directly booting into rogue recovery. From there you can flash mods, tweaks, etc and then just reflash a compatible ICS kernel. What do you really need rogue for? Not worth the risk IMO.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
Interesting. I'll have to read up more regarding Odin. So I could literally open Odin and plug my phone in and then flash the el26 kernel and flash whatever ROM I want from Odin as well? Sorry, a little confused there. Just not sure how I'd flash a ROM without a custom recovery.
Thanks again, I'll also check out some tutorials. I'm guessing it will feel like 2nd nature in a week, just learning the new process.
The recovery is built into the kernel for this device. I use odin, flash the el29 rouge kernel v1.4.1, when the phone resets after the flash, boot into recover using volume up and power, wipe, flash, whatever you want, make sure you reinstall ics rom or kernel if you are on ics and reboot.
Ah, so if I flash the EL26 Kernel, will that overwrite my Rogue Recovery?
mjs2011 said:
Interesting. I'll have to read up more regarding Odin. So I could literally open Odin and plug my phone in and then flash the el26 kernel and flash whatever ROM I want from Odin as well? Sorry, a little confused there. Just not sure how I'd flash a ROM without a custom recovery.
Thanks again, I'll also check out some tutorials. I'm guessing it will feel like 2nd nature in a week, just learning the new process.
Click to expand...
Click to collapse
Well download whatever rom+mods/etc and put the files on your phone. Then just odin/mobile Odin the el26 cwm kernel and flash whatever you want from there, ICS or GB without no chance of a brick.
On our phone and I think most Samsung's for that matter, the recovery isnt separate from any other partition like with HTC. It must be packed into the kernel. So whenever you flash a rom, whatever recovery is packed in with that kernel included with the rom is what you're getting. Most devs are packing in stock Android recovery to cut down on bricks and instead recommend always flashing from el26 cwm kernel.
So yea that's what makes mobile Odin so great. Have el26 on your storage and you can switch roms very fast, easy, and safe.
Anymore questions just ask.
Edit: are you on GB or ICS Blue Kuban and what rogue also?
Sent from my SPH-D710 using Tapatalk
Thanks, really good info. I'm on Blue Kuban ICS right now with Rogue CWM 5.0.2.7. Looks like Odin will be a very easy way once I get comfortable with it.
So basically, I'll put the kernel zip in the PDA slot in Odin and let it do its thing, then my phone will auto reboot into the kernel's recovery where I can flash the ROM? Or do I flash the kernel in Odin, and also flash the ROM in Odin as well?
mjs2011 said:
Thanks, really good info. I'm on Blue Kuban ICS right now with Rogue CWM 5.0.2.7. Looks like Odin will be a very easy way once I get comfortable with it.
So basically, I'll put the kernel zip in the PDA slot in Odin and let it do its thing, then my phone will auto reboot into the kernel's recovery where I can flash the ROM? Or do I flash the kernel in Odin, and also flash the ROM in Odin as well?
Click to expand...
Click to collapse
Odin is just used to flash the safe el26 cwm kernel onto your phone. It will auto reboot and just hang at the Galaxy S II screen since the GB kernel can't boot an ICS rom so just power+volume up into it. Hold it for maybe up to 15 seconds but it'll come around. You then flash the rom in recovery from there. So put you rom files, etc on your phone before you Odin the kernel.
Sent from my SPH-D710 using Tapatalk
slick_rick said:
Odin is just used to flash the safe el26 cwm kernel onto your phone. It will auto reboot and just hang at the Galaxy S II screen since the GB kernel can't boot an ICS rom so just power+volume up into it. Hold it for maybe up to 15 seconds but it'll come around. You then flash the rom in recovery from there. So put you rom files, etc on your phone before you Odin the kernel.
Sent from my SPH-D710 using Tapatalk
Click to expand...
Click to collapse
oh ok sweet. That sounds pretty easy, actually! LOL! One last question hopefully, do I need to extract the kernel zip or do I just place the zip in the PDA slot?
Thanks again for your help today. It really cleared a bunch of questions I had.
mjs2011 said:
oh ok sweet. That sounds pretty easy, actually! LOL! One last question hopefully, do I need to extract the kernel zip or do I just place the zip in the PDA slot?
Thanks again for your help today. It really cleared a bunch of questions I had.
Click to expand...
Click to collapse
Kernels flashed through PDA slot in Odin will be in either .tar or tar.md5 format, .zips are for cwm recovery only. You can find the el26 cwm kernel in the kernel repository sticky in dev section, its the first kernel listed. No problem, glad to help.
Sent from my SPH-D710 using Tapatalk
or u can use the 34gt auto
http://forum.xda-developers.com/showthread.php?t=1342728
Thanks again everyone. I successfully switched roms today with no issues.
Sent from my SPH-D710 using XDA
I'm currently on Calkulin's GB ROM and am ready to finally make the jump to ICS, likely the Blazer ROM. That ROM hasn't been updated for a few weeks, which has obviously been a pretty eventful period of time. So I'm assuming, after I flash this from my existing CWM custom recovery, and because this ROM includes the stock kernel, that I'll need to additionally flash something like agat63's kernel and recovery to be considered "safe"? And because I'll be initially using the stock recovery with the ROM, that means I'll need to do it through ODIN or Mobile ODIN? Trying to make sure I've got all of my ducks in a row before I attempt the upgrade.
And I suppose I should ask this too, even though I know it will be speculation... I'm not in a huge hurry to make the jump to ICS, so would you guess that the Blazer ROM will eventually be upgraded to include an updated/safe kernel and recovery, thereby saving myself this small effort (which in my amateur hands still has the chance to go wrong)?
Thanks for the feedback.
Yes using the stock kernel can cause bricks. You can use mobile Odin to flash agat kernel with recovery. I did. Then from there you should be safe.
So wipe, flash ICS rom you want, then flash the agat kernel (this way you don't have to do it in mobile Odin or Odin) then from there you should be good to go
Sent from my SPH-D710 using xda app-developers app
1. Odin the touchwiz kernel by chris41g which has a safe CWM recovery
2. Boot into said recovery and wipe data
3. Flash Blazer ICS
4. Enjoy
So perhaps this speaks to some basic misunderstanding of how this works, but since I'm on an EL29 GB ROM and kernel/recovery (Rogue kernel & recovery), can I not flash to Blazer ICS directly? And if I flash that new ROM, won't I end up with the stock kernel/recovery included in that ROM? And therefore still be "unsafe" at the end?
I hope that if I'm dead wrong that at least the question makes sense.
Thanks.
gg_99 said:
So perhaps this speaks to some basic misunderstanding of how this works, but since I'm on an EL29 GB ROM and kernel/recovery (Rogue kernel & recovery), can I not flash to Blazer ICS directly? And if I flash that new ROM, won't I end up with the stock kernel/recovery included in that ROM? And therefore still be "unsafe" at the end?
I hope that if I'm dead wrong that at least the question makes sense.
Thanks.
Click to expand...
Click to collapse
I just did what your asking. Make a back up. Flash the calks wipe all and then flash the rom. Read the blazer OP before you doing anything. I had no issues running like a champ
Sent from my SPH-D710 using xda app-developers app
And what was the resulting kernel/recovery *after* the flash? That seems to be the trick in my mind. Want to make sure I end up with a safe kernel/recovery after flashing the ROM.
I just went back to calks. im not sure on the kernel but the recovery was Agats tREC v0.2.0 sorry for the late response and lack of info.
Hi all,
I just got a replacement E4GT from Sprint, I had planned on staying stock but after the hardware issues of my first iteration of this device and the somewhat lackluster update, I decided to take control and root/flash.
I used to do this on the EVO but it's been a while.
so I followed QBKing77's videos to the best of my ability. I have Rogue Recovery installed (pretty sure it's the latest, I downloaded from the official thread and ran the exe to install less than an hour ago). It's doing NAND backup and recovery just fine, so I assume Rogue is working but I can't install AOKP or MIUI.
From the video, it seems like I use the zipped file on the phone's memory, do I need to unzip first?
Can I flash directly from a EL29 Rogue to an AOSP ICS ROM?
Use Chris 41g's EL26 CWM kernel for initial AOSP flashes. Though if your stock now are you not on FF18 ICS yet?
El26 rogue for flashing.
Sent from my SPH-D710 using xda app-developers app
rovar said:
El26 rogue for flashing.
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
No, No rogue for AOSP. Custom CWM bricks. Rogue was the popular one at the time, pretty sure there was another one that was not working as well.
EL26 with bone stock CWM.
RainMotorsports: I am on EL29, I've had the replacement for 3 days and it has not updated. I could follow the manual update but I hear most people like to flash from GB ROMs because they're stable?
also, I'm sorry, I don't understand flashing kernels. Don't we have to flash an ICS rom before we flash a kernel? And I thought the AOSP kernel was stock with Milestone 6?
rovar: So should I Odin back to EL26, re-root and install a recovery? Does that have a better recovery?
I'm wondering if I should just unzip the files and try again...
You can flash the EL26 cwm kernel on to the phone as is. If its rooted sfhubs auto root tool can do it for you http://forum.xda-developers.com/showthread.php?t=1342728. If its not rooted you can flash the tar for it in odin. http://chris41g.devphone.org/index.php?dir=EpicTouch/Stock+Repack/EL26/
As far as FF18 goes the leak was the OTA you can NoData one click for an OTA like experience where things are not perfect or wipe the phone with full data. http://forum.xda-developers.com/showthread.php?t=1721229
I can approach the rom/kernel question from 100 angles. But you need a kernel with the proper recovery to flash the rom, when you flash the rom the kernel is overwritten with the kernel in that rom. To get another kernel you once again have to flash a kernel. I do not keep up with AOKP. CM9 since alpha 6 has a safe cwm5 based recovery and it + the nightlies use a repacked stock kernel. Chris 41g is testing some from source kernels for both, the AOKP one requires his version of milestone 6 and thats my extent of knowledge on the state of AOKP kernels.
AOSP roms flashed with EK02 through EL29 rogue brick. Chris41gs EL26 CWM has been the tried and true kernel. You could flash the kernel of a TW or AOSP rom, the phone will not boot until a matching rom is installed but we did the reverse (EL26 kernel while the rom was still ICS) all the time.
Thank you. I found a video that showed how to get stock EL26 CWM Kernel installed via Mobile Odin. I am trying to make a second backup because I'm not sure the Rogue Nandroid is compatible but it's having trouble making a backup from here. It seems that it's only recognizing 200mb of free space and I know there's a lot more.
It seems that the EL29 Rogue backup I made won't restore to the EL26 kernel/EL29Rom I'm now running. I'm going to delete the old backup and try to make a new one.
Anyway, sounds like I'm pretty close!
And I'm now running AOKP. Thanks so much! You guys were fast and helped a ton!
JeremyMundell said:
And I'm now running AOKP. Thanks so much! You guys were fast and helped a ton!
Click to expand...
Click to collapse
Nice. I bet the addiction is already setting in. I just went from CM9 Nightly 7-22 to an early 4.1.1 AOSP build back to TCP's 7-28 CM9 which i had no clue what to expect from but I am on it now. Must must must flash them all!
Edit - I just flashed FF18 forgot I wanted to PRL update and fix my boot image while I was at it.
I have been looking around for about an hour or two trying to find a solid tutorial on how to install a custom recovery to install new Roms. I flashed my phone onto Virgin Mobile on FH13. It seems to me that there is more than meets the eye to installing a recovery on this phone. I really don't want to mess anything up at all. Could anyone guide me the right way as to how I can get CWM on my phone? I appreciate any help you can give me. Thanks!
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
RainMotorsports said:
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
Click to expand...
Click to collapse
Also new to the e4gt, im currently rooted on fh13.
say i want to flash paranoidandroid, which kernel (which includes recovery?) would you recommend?
also this is either flashed from odin (pc) or can be done through mobile odin?
then once kernel is flashed, i can then reboot into recovery, wipe and flash rom/gapps?
sorry for all the questions, just want to make sure!
bongzilla said:
Also new to the e4gt, im currently rooted on fh13.
say i want to flash paranoidandroid, which kernel (which includes recovery?) would you recommend?
also this is either flashed from odin (pc) or can be done through mobile odin?
then once kernel is flashed, i can then reboot into recovery, wipe and flash rom/gapps?
sorry for all the questions, just want to make sure!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1953783
RainMotorsports said:
Recovery is packed into the kernel on this phone. Flash a kernel tar through ODIN if you want, it will trigger the yellow triangle though. If your already rooted you could use Mobile ODIN. If you already have some form of custom recovery and are just trying to switch up you can flash the kernel zip in recovery.
rwilco has pretty much every kernel for every purpose but since your on stock you will either want a repacked stock or custom tw kernel - http://rwilco12.androidfilehost.com/?dir=Kernels/Recovery Kernels/ICS
If your unfamiliar then keep asking questions. Our phone has a bug in its eMMC firmware triggered during format operations on the stock kernel as of Android 4.0. The specifics are detailed but all you really need to know is grab a kernel with a safe recovery, or even going as far as AGAT's custom kernel which has more work around in place to prevent a factory reset or rom install from turning your phone into a super brick.
Click to expand...
Click to collapse
My phone already has root. Everything else is stock. 4.0.4, build FH13, with no custom recoveries.
I don't understand what you mean in your second paragraph with "repacked stock" or "custom tw kernel".
I am completely lost as to where I should be going. My plan is to install this rom: http://goo.im/devs/Shabbypenguin/E4GT-Nightlies
How would I go around to getting this on my phone?
Also, what about this rom: http://forum.xda-developers.com/showthread.php?t=1810315
I am not sure which rom runs the fastest and most efficient. There are so many kernels for so many things, I have absolutely no idea which kernel to flash and how to flash it.
EDIT: So I have done some more reading up and I THINK I can starting to understand some of it. I assume the steps are to:
1. Install Mobile Odin Lite on my phone.
2. Flash the EL26 kernel on Odin Lite. Link to kernel: http://forum.xda-developers.com/showthread.php?t=1662295 (first kernel on the page)
3. This part I am kinda lost. Not sure if that kernel installed a new recovery or not. I assume I just reboot and go into recovery.
4. Nandroid a backup of my ICS stock that is on now? Can I even go back to this stock backup after putting on a new Rom? Which kernel would I need to install backup of stock?
5. Wipe data, dalvic, and install new Rom using instruction it came with. My problem is I want to run this Rom: http://goo.im/devs/Shabbypenguin/E4GT-Nightlies and it has no instructions. I assume you just wipe data and dalvic?
6. flash Rom, then flash Gapp? It doesn't have a link for any of the Gapps, so either I have to find a link to download Gapp or that rom already comes with it? Not sure.
7. Reboot into new Rom? Not sure if I missed a step or not.
Another question I have is with the kernels. Can I just leave it on the EL26 kernel for daily use of the phone? Say I want to install maybe cm10 next, do I just keep it on EL26?
Sorry for the spam of questions. I like to be 100% certain.
Best bet if your trying to install CM9 is to go to the EL26 CWM kernel as all of the AOSP rom instructions dictate. Using the EL26 kernel means your phone will only boot to Download and Recovery as it will only boot gingerbread roms.
Download the nightly you want to the device and then flash the EL26 CWM kernel in Mobile ODIN. After its all over with you might need to battery pull if you messed up booting into recovery and then boot into recovery (power + vol up). Install the rom. Install gapps. Wipe cache/dalvik but as I will recommend below you should just backup everything and a full wipe.
You can nandroid if you want but it will be making a copy of the ICS rom you have with the EL26 kernel on it so it is literally a restore to the point your starting from not where you were just before that. Its still a good idea if your afraid of losing things. I would use Super Backup from the market to backup your Contacts, Call Logs and MMS. Wipe cache and dalvik and all that. But realisticly you should backup your apps and data if you have Titanium Backup and start fresh just factory reset after your on CM9. Restore your apps with data (no system data) after that. A clean install will present the least of issues, even the Samsung updates from one rom to another are not without issues.
You can not boot anything but gingerbread with EL26 and once you install a rom you will be on the kernel with that rom. So you will have a Linux 3 android kernel with cwm 6 if you go with a CM9 nightly. From there you can flash the next nightly or the next beta etc. Older stuff will not flash from your new setup as AOSP roms have switched to a new device name in the build.prop.
As far as gapps here it is - http://goo.im/gapps/gapps-ics-20120429-signed.zip and don't forget to put this on the device ahead of time or you will have to mount usb and transfer using the pc in recovery.
RainMotorsports said:
Best bet if your trying to install CM9 is to go to the EL26 CWM kernel as all of the AOSP rom instructions dictate. Using the EL26 kernel means your phone will only boot to Download and Recovery as it will only boot gingerbread roms.
Download the nightly you want to the device and then flash the EL26 CWM kernel in Mobile ODIN. After its all over with you might need to battery pull if you messed up booting into recovery and then boot into recovery (power + vol up). Install the rom. Install gapps. Wipe cache/dalvik but as I will recommend below you should just backup everything and a full wipe.
You can nandroid if you want but it will be making a copy of the ICS rom you have with the EL26 kernel on it so it is literally a restore to the point your starting from not where you were just before that. Its still a good idea if your afraid of losing things. I would use Super Backup from the market to backup your Contacts, Call Logs and MMS. Wipe cache and dalvik and all that. But realisticly you should backup your apps and data if you have Titanium Backup and start fresh just factory reset after your on CM9. Restore your apps with data (no system data) after that. A clean install will present the least of issues, even the Samsung updates from one rom to another are not without issues.
You can not boot anything but gingerbread with EL26 and once you install a rom you will be on the kernel with that rom. So you will have a Linux 3 android kernel with cwm 6 if you go with a CM9 nightly. From there you can flash the next nightly or the next beta etc. Older stuff will not flash from your new setup as AOSP roms have switched to a new device name in the build.prop.
As far as gapps here it is - http://goo.im/gapps/gapps-ics-20120429-signed.zip and don't forget to put this on the device ahead of time or you will have to mount usb and transfer using the pc in recovery.
Click to expand...
Click to collapse
Ah, I read it twice and now it makes more sense. I have a pretty good idea of what to do now.
Put rom and gapp on phone, install EL26, backup, full wipe, flash rom and gapp, rom will install new kernel for me, then just reboot.
Last question, I just want to make sure. What exactly is a full wipe on this phone. I have done plenty of full wipes on the evo 4g. I am just asking because I hear some people have problems when they do a full wipe.
I really appreciate your help. Thank you!
Sorry if I jumbled everything together in my post by the I was running out the door. But this Hurricanne has stopped that and I regret not taking my time.
Well what I mean is a factory reset which formats /Cache and /Data. When you install the rom its going to format /System prior to writing the new firmware/rom. /Data has all your user apps, their data and your information etc. This does not wipe the Internal SD or the External SD though at times a line saying it was does come up in CWM.
Just don't do a Factory reset on the stock kernel you are on now, its fine on EL26 its fine on the kernels that come with the CM9 nightlies. Super Backup apparently does app's now too. I have never used it since I have Titanium Backup Pro but figured its also worth mentioning.
A note on turning back. As I said before if you flash the EL26 CWM kernel you wont be able to boot the ICS rom installed on the phone. At that point to go back instead of forward you can flash the FH13 kernel in desktop ODIN or the zip in CWM and you will have the FH13 kernel instead of EL26 and be back where you were. But once you flash the EL26 CWM kernel your goal at that point is flashing your rom of choice in CWM and not things like booting the phone.
You should be "okay" coming from a dirty install just wiping cache. But you may never know if a problem your having is the rom or some left over data unless you go clean and factory reset. Its a choice and its also a choice you can make later as you can always reset later. I would back up anything important first before doing any of this. Not so much a worry about bricking, as just about any normal situation will be recoverable, but more so to the point of if you have to wipe the phone and start from scratch.
RainMotorsports said:
Sorry if I jumbled everything together in my post by the I was running out the door. But this Hurricanne has stopped that and I regret not taking my time.
Well what I mean is a factory reset which formats /Cache and /Data. When you install the rom its going to format /System prior to writing the new firmware/rom. /Data has all your user apps, their data and your information etc. This does not wipe the Internal SD or the External SD though at times a line saying it was does come up in CWM.
Just don't do a Factory reset on the stock kernel you are on now, its fine on EL26 its fine on the kernels that come with the CM9 nightlies. Super Backup apparently does app's now too. I have never used it since I have Titanium Backup Pro but figured its also worth mentioning.
A note on turning back. As I said before if you flash the EL26 CWM kernel you wont be able to boot the ICS rom installed on the phone. At that point to go back instead of forward you can flash the FH13 kernel in desktop ODIN or the zip in CWM and you will have the FH13 kernel instead of EL26 and be back where you were. But once you flash the EL26 CWM kernel your goal at that point is flashing your rom of choice in CWM and not things like booting the phone.
You should be "okay" coming from a dirty install just wiping cache. But you may never know if a problem your having is the rom or some left over data unless you go clean and factory reset. Its a choice and its also a choice you can make later as you can always reset later. I would back up anything important first before doing any of this. Not so much a worry about bricking, as just about any normal situation will be recoverable, but more so to the point of if you have to wipe the phone and start from scratch.
Click to expand...
Click to collapse
That clarified a lot, thanks.
So I did it all. I did a factory reset from the new kernel. did dalvic also. I installed the new rom and gapp. Problem is that once I reboot, it shows the Galaxy SII screen, then goes into a black screen. I can't turn it back on again, so I remove the battery and it can restart. Does the same thing though. I followed your instruction and http://e4gtcm.blogspot.com/p/cm9-install-guide.html
What did I do wrong? I am worried I messed up my phone completely.
EDIT: So I went back into recovery and it was now a new version of CWM. I did everything over again; factory reset, cache, dalvic, and it is doing the same thing. Boots up "Galaxy SII" screen, then a black screen. It seems to still be on in the black screen seeing that it doesn't "turn" on again. I can hold if for 15 second or so for it to reset and does the same thing. Why is there a black screen?
Sorry for not checking back. Your probably freaking right now lol but relax your at a good point everything is fine.
Either a bad download or the nightly you went with happens to be a baddy. I am still on 10/20 I was gonna flash 10/28 today but the weather is screwing with me. goo.im seems pretty slow today.
Download another, battery pull and hold vol up + power until it hits recovery then go into mounts and mount usb storage hook a usb cable to the pc and copy over another build. I would say try 10/20 just because it works pretty good but that won't stop another bad download in which case you have to try try again.
Worst case from here we can just odin you back to stock rooted FH13 or your choice of other. Your phone is fine from what you have told me so far. I can upload one of the builds I have if you think ti would help any.
RainMotorsports said:
Sorry for not checking back. Your probably freaking right now lol but relax your at a good point everything is fine.
Either a bad download or the nightly you went with happens to be a baddy. I am still on 10/20 I was gonna flash 10/28 today but the weather is screwing with me.
Download another, battery pull and hold vol up + power until it hits recovery then go into mounts and mount usb storage hook a usb cable to the pc and copy over another build. I would say try 10/20 just because it works pretty good but that won't stop another bad download in which case you have to try try again.
Worst case from here we can just odin you back to stock rooted FH13 or your choice of other. Your phone is fine from what you have told me so far.
Click to expand...
Click to collapse
Phew! I was pretty positive that I could still get back to something working, just my paranoid self was getting tense. I got 10/28. I guess I will do 10/20. Do you know what the other updates have? I would hate to install something that isn't working its most efficient.
Again, thank you so much. You were of great help! Good luck with the weather issue. Hope you're safe!
I stopped following chris's experimentals so i am not sure what the most recent focuses have been. The Nightlies have whatever code was commited. They are built automatically and can range from very stable to not booting at all. I dont have any of the links on me but someone can get it to you. Reading commits is not exactly 100% user friendly especially if your not a developer. But they often have clues. I would follow the CM9 Beta thread and the CM9 User Support Threads - http://forum.xda-developers.com/showthread.php?t=1874374 and http://forum.xda-developers.com/showthread.php?t=1720771
I used to DL nightlies from work over 3g or 4g all the time and would get a bad dl and end up in situations where even my experienced self felt like I couldn't fix it till I got home and always got the phone running within an hour without the assistance of a near by pc.
I am uploading 10/20 to my server just in case its in Chicago so if your away from the weather it should be unaffected for the most part. Glad its not in NY anymore.
EDIT - http://android.rainmotorsports.net/10-20-CM9-d710-KANG.zip the md5 hash as I have it is 66246125ACDBEF2EBF2144E0CBFEBB7B and it matches the md5 listed on goo.im
RainMotorsports said:
I stopped following chris's experimentals so i am not sure what the most recent focuses have been. The Nightlies have whatever code was commited. They are built automatically and can range from very stable to not booting at all. I dont have any of the links on me but someone can get it to you. Reading commits is not exactly 100% user friendly especially if your not a developer. But they often have clues. I would follow the CM9 Beta thread and the CM9 User Support Threads - http://forum.xda-developers.com/showthread.php?t=1874374 and http://forum.xda-developers.com/showthread.php?t=1720771
I used to DL nightlies from work over 3g or 4g all the time and would get a bad dl and end up in situations where even my experienced self felt like I couldn't fix it till I got home and always got the phone running within an hour without the assistance of a near by pc.
I am uploading 10/20 to my server just in case its in Chicago so if your away from the weather it should be unaffected for the most part. Glad its not in NY anymore.
EDIT - http://android.rainmotorsports.net/10-20-CM9-d710-KANG.zip the md5 hash as I have it is 66246125ACDBEF2EBF2144E0CBFEBB7B and it matches the md5 listed on goo.im
Click to expand...
Click to collapse
I just got it downloaded. It is now up and running perfectly. I appreciate all your help man, thanks a bunch. I live in Washington state. So the weather wont affect me.
Good evening all. I hope this is the right forum to post my question about recovery for my e4g touch. I recently rooted my phone and my phone is currently on the fi27 build. Is there a recovery i can put on there now to go ahead and start flashing ruins, or will i have to wait for qbkng77 to post his video on you tube on putting cwm recovery on fi27 rooted e4g touch? Thanks in advance for the help!
Sent from my SPH-D710 using xda app-developers app
n1stunna84 said:
Good evening all. I hope this is the right forum to post my question about recovery for my e4g touch. I recently rooted my phone and my phone is currently on the fi27 build. Is there a recovery i can put on there now to go ahead and start flashing ruins, or will i have to wait for qbkng77 to post his video on you tube on putting cwm recovery on fi27 rooted e4g touch? Thanks in advance for the help!
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
I assume you do the same thing as I did. Get the EL26 kernel and flash it with Mobile Odin. I would wait on someone else to confirm that though.
Another really quick question. I want to overclock my phone. I tried using setcpu and the overclocker it came with. It only goes to a max of 1200 but I know it can go higher. I am guessing I need another kernel. What kernel can I use?
joshlete said:
Another really quick question. I want to overclock my phone. I tried using setcpu and the overclocker it came with. It only goes to a max of 1200 but I know it can go higher. I am guessing I need another kernel. What kernel can I use?
Click to expand...
Click to collapse
You either need a kernel with built in over clock support(you'd see the CPU slider go up to 1400-1600 automatically if it was). Or a kernel that supports over locking in tegrak, which you "load over clock module" with in tegrak.
Both Kuban kernel and some of Agats kernels have built in support, mine you need to use tegrak as I have not added built in yet
You can get them all in rwilco's (awesome) kernel repository stickied in development
Sent from my SPH-D710 using xda premium