plzzz help .... i had a camera failure .... i turned off my wonder and opened it again the camera works fine but this is a repeated problem ..... plz give me the link of best latest official firmware for wonder
angoma said:
plzzz help .... i had a camera failure .... i turned off my wonder and opened it again the camera works fine but this is a repeated problem ..... plz give me the link of best latest official firmware for wonder
Click to expand...
Click to collapse
First, Typing "plzzzzz", does not help at all, it would be better if you tell about your phone, such as :
-Firmware Version
-Apps you've installed
-Maybe mods that you've installed
-Your Region
About the "Best" Firmware, it varies for each person, try looking at the Firmware collection at the Development section.
I myself uses Stock Firmware i8150DXLA2 (Asia Region) and I have no problem.
Sent from my Modded Stock DXLA2 (Didn't have the mood to update)
Normally this problem shouldn't be appearing frequently, I just experienced it once or twice along the usage of the phone, maybe you can try to get assist from the Samsung Service Centre or maybe you can try to do a factory reset if you are convenient, but it will involve a lot of works such as backuping, anyway good luck to you and hope it helps.
ps please give more details if possible (eg mod, hack, situation-when did this problem started to occur, etc)
i also experience this once i just do a factory reset and it fix my problem..
also what is the main problem??
stopped working?
full memory even you have memory left?
well best asia FW for me is I8150DXLM3 I8150OLBLD1
Man, have u installed the Smart Stay app from Google Play. It makes yr camera fail when its scanning your face
Hope this will help.
I had the same problem using the Value Pack ROM.
IT shows a "camera failed" message sometimes, but it works again after killing the camera process OR rebooting the phone.
Hugs
rbaker91 said:
I had the same problem using the Value Pack ROM.
IT shows a "camera failed" message sometimes, but it works again after killing the camera process OR rebooting the phone.
Hugs
Click to expand...
Click to collapse
I installed an app that made the camera fail Go through your apps and uninstall them trying to figure out which one is doing this
For me it was installing google talk with video
Related
Hello people,
I just updated my Wave 525(S5253) with KIES 2.0 to firmware S5253DDKC1/S5253ODDKA1.
But after updating I am unable to use my camera. It gives "Camera failed" error.
Any help? Is this firmware buggy? If so why did Samsung release it, that too on KIES??
Anyone else tried updating to this firmware?
Thanks
Even I had got same problem in my wave s8500, I had ddjh1 and i tried flashing malaysian bada 1.2 which was not a full FW and my camera was messed up. after flashing xxjid i still had the same problem, so i went to phone's internal menu(*#197328460#>video>camera firmware>Phone/CAM ver check... it was SESBDF21:SESBDF21....... this is mostly similar to wave 525
Then after Flashing it was SESBDG01:SESBDF21 then i selected phone to CAM write
and CAM was updated to SESBDG01... then my camera came back to normal...( i found this in Badadev forum)
First reboot ur phone once then Try selecting option Phone to CAM write in case there is differance of CAM FW.. DO AT YOUR OWN RISK!
If you have flashed FW unofficially try this, if through kies before doing above steps use ur warranty ......GO TO SERVICE CENTER!
Thanks jake for the quick reply. I tried the above steps, the menu layout was a little different, but yeah i found the right options...but it did not work..
As I had updated it via KIES.....so I am gonna use my warranty....
dj2tusk said:
Thanks jake for the quick reply. I tried the above steps, the menu layout was a little different, but yeah i found the right options...but it did not work..
As I had updated it via KIES.....so I am gonna use my warranty....
Click to expand...
Click to collapse
IS bug of the KC1 firmware... Flash KC2 with multiloader..(KC1 isn't official updato so Kies doesn't update the phone)
sorry for my bad english,
xmannox
xmannox said:
IS bug of the KC1 firmware... Flash KC2 with multiloader..(KC1 isn't official updato so Kies doesn't update the phone)
sorry for my bad english,
xmannox
Click to expand...
Click to collapse
Your english is ok.......but i updated to KC3, again with KIES, but still no camera...
Also there are lot of string errors in the main menu...like Orkut is replaced with "Mes Contenus" and Voice recorder with "360 My Web"...
Hi everyone
I'm surprise to see the new official 4.2.2 firmware of i9082 with the name I9082LVJUBMJ1 in Samsung website and it's so happy for i9082"L" version like me. Can I flash this ROM (of course through Odin) with my i9082L THW ? (I bought my phone in Thailand) ?
Does anyone flash this rom on your i9082L ? Is it Good ?
If somebody downloaded this ROM and flashed to your phone, please leak the link for any ppl can download it. I hate Hotfile and Uploaded ! IT's very slow
Thank you very much!
abc_x3 said:
Hi everyone
I'm surprise to see the new official 4.2.2 firmware of i9082 with the name I9082LVJUBMJ1 in Samsung website and it's so happy for i9082"L" version like me. Can I flash this ROM (of course through Odin) with my i9082L THW ? (I bought my phone in Thailand) ?
Does anyone flash this rom on your i9082L ? Is it Good ?
If somebody downloaded this ROM and flashed to your phone, please leak the link for any ppl can download it. I hate Hotfile and Uploaded ! IT's very slow
Thank you very much!
Click to expand...
Click to collapse
brother you have to download from only these two sites i know they are slow but that is what we have
i will inform if i flash it
abc_x3 said:
Hi everyone
I'm surprise to see the new official 4.2.2 firmware of i9082 with the name I9082LVJUBMJ1 in Samsung website and it's so happy for i9082"L" version like me. Can I flash this ROM (of course through Odin) with my i9082L THW ? (I bought my phone in Thailand) ?
Does anyone flash this rom on your i9082L ? Is it Good ?
If somebody downloaded this ROM and flashed to your phone, please leak the link for any ppl can download it. I hate Hotfile and Uploaded ! IT's very slow
Thank you very much!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2517418
I downloaded n flashed it on my Grand immediately after opening this thread.
No problem happened but u should reset factory default after flashed it to have pure stock rom
This rom booted up wit Brazil (Portuguese) language and u can easy change it to English
Also it included many TIM's and other bundled application, u should remove all by using Clean Master or Titanium BU
GUI is slightly different to 4.1.2, especially Setting, and i like this GUI more than 4.1.2
(However no more Development in Setting)
Unfortunately, i'm now facing to a small problem after installing Philz CWM & rooting this device & deleting unwanted applications : whenever the phone reboot, language automatically turns back to Brazil ) Don't know how to solve this ^_^
I confirm this Brazil ROM can update with THW version (through Odin)
Other issues: in stock 4.2.2, SSG is hotter than 4.1.2 though it's smoother. After changing launcher to Nova, temperature seems become better
Sent from my GT-I9082L using xda app-developers app
abc_x3 said:
I downloaded n flashed it on my Grand immediately after opening this thread.
No problem happened but u should reset factory default after flashed it to have pure stock rom
This rom booted up wit Brazil (Portuguese) language and u can easy change it to English
Also it included many TIM's and other bundled application, u should remove all by using Clean Master or Titanium BU
GUI is slightly different to 4.1.2, especially Setting, and i like this GUI more than 4.1.2
(However no more Development in Setting)
Unfortunately, i'm now facing to a small problem after installing Philz CWM & rooting this device & deleting unwanted applications : whenever the phone reboot, language automatically turns back to Brazil ) Don't know how to solve this ^_^
I confirm this Brazil ROM can update with THW version (through Odin)
Other issues: in stock 4.2.2, SSG is hotter than 4.1.2 though it's smoother. After changing launcher to Nova, temperature seems become better
Sent from my GT-I9082L using xda app-developers app
Click to expand...
Click to collapse
in about phone menu click on build number 7-8 times it will enable development settings.
abc_x3 said:
I downloaded n flashed it on my Grand immediately after opening this thread.
No problem happened but u should reset factory default after flashed it to have pure stock rom
This rom booted up wit Brazil (Portuguese) language and u can easy change it to English
Also it included many TIM's and other bundled application, u should remove all by using Clean Master or Titanium BU
GUI is slightly different to 4.1.2, especially Setting, and i like this GUI more than 4.1.2
(However no more Development in Setting)
Unfortunately, i'm now facing to a small problem after installing Philz CWM & rooting this device & deleting unwanted applications : whenever the phone reboot, language automatically turns back to Brazil ) Don't know how to solve this ^_^
I confirm this Brazil ROM can update with THW version (through Odin)
Other issues: in stock 4.2.2, SSG is hotter than 4.1.2 though it's smoother. After changing launcher to Nova, temperature seems become better
Sent from my GT-I9082L using xda app-developers app
Click to expand...
Click to collapse
The language change issue is due to the new update of SuperSU, ver 1.69. Just uninstall the update reboot and it should fix the problem. I am back to ver 1.25 that came the root zip. You can probably find ver 1.65 somewhere. But, the old version works for me. Chainfire said on his Google + that he is aware of the problem and will fix it on the next update.
Thanks to k2wl & hunter0389, confirm the language problem solved by changing to older SuperSU ( I used 1.34)
Btw, do you use Motion : go on top by tapping 2 times on top of your Samsung phone in Setting> My Device> Motion & Gesture > Motion. I didn't see this motion in new 4.2.2 ( I used to use this motion in 4.1.2)
I also feel the Smart Stay doesn't work "Smart" as 4.1.2 ^_^
Motion : go on top
Thanks to k2wl & hunter0389, confirm the language problem solved by changing to older SuperSU ( I used 1.34)
Btw, do you use Motion : go on top by tapping 2 times on top of your Samsung phone in Setting> My Device> Motion & Gesture > Motion. I didn't see this motion in new 4.2.2 ( I used to use this motion in 4.1.2)
I also feel the Smart Stay doesn't work "Smart" as 4.1.2 ^_^
Motion only works on Contact. It is pretty useless in my opinion. 4.2.2 does not have it. Smart Stay has never really worked well on 4.1.2 or 4.2.2 for me. So, i turned it off.
Hello
I'm new here so they wouldn't allow me to post on the Dev section, anyways, I bought my Xperia S with Android GB in it and it has been with me for a while so i keep updating it. I installed the last software Sony has (JB .96) before i started flashing custom ROMs, however, i noticed that the WiFI stopped working in all the JB versions (.200, .211, .96) and when i did some research i found that Sony has activated its restriction program on some countries these are Sudan, Iran and Syria, as far as i know. me, i'm from Sudan, i figured that the the device shuts down the wifi ONLY when it detects the SIM card, as when i try to remove the SIM of turn on AirPlane mode (then restart the Device to start on AirPlane mode) the wifi works just fine.
when the wifi is locked, i can still turn it on, but the device starts to get very slow and it keeps searching for networks forever, and when i turn it of it take a loooong time to do so. installing custom ROMs did not fix this problem as most of the ROMs are based on the JB builds. i tried other solutions like trying to change the country code and so, but still, no luck. i might have tried lots of things here but frankly i'm not a developer, but i succeed to flash ROMs and Kernels by following your instruction, which u do very well on it .
I though that you guys did not encounter this issue before because you are not is a in a country that is under "US sanction" , but i'm sure you would have fixed this problem if you have heard of it
sorry for the loooong post hehe.
just one last thing, I LOOOOOVE what you guys are doing and i really do appreciate it, i WANT to donate but, there we (guys from Sudan)
can't create a PayPal account or so, again "US sanction".
oooooooooooookay i guess i'm not welcomed here
BMBcin said:
oooooooooooookay i guess i'm not welcomed here
Click to expand...
Click to collapse
Can,t u just flash for example PureSlim KitKat rom? Im using it now, it's working 100% fine and much faster than JB or any modded JB. Im 100% there will not be any wifi restrictions here.
UlvarinPL said:
Can,t u just flash for example PureSlim KitKat rom? Im using it now, it's working 100% fine and much faster than JB or any modded JB. Im 100% there will not be any wifi restrictions here.
Click to expand...
Click to collapse
hey body, thx for replying, i tried every possible rom u could think of, im now using OpenSEMC-U-R2c, i've been searching of a solution forever.
Where are u now? r u in Sudan? using Sudanese network operator?
same problem here
Hi There
I'm from Sudan too and I'm facing the same problem as @BMBcin I've tried Zillions of ROM's to solve the problem (I don't know about the restriction thing but putting the phone in flight mode didn't help either , my friend have Xperia Z and WiFi is working fine for him ) if someone come up with a solution please post it here
my phone is xperia ion, I have this problem and solve that
refer this link http://forum.xda-developers.com/showthread.php?p=52532781
Solved
Thank you @feri_sh problem solved
feri_sh said:
my phone is xperia ion, I have this problem and solve that
refer this link http://forum.xda-developers.com/showthread.php?p=52532781
Click to expand...
Click to collapse
Hi all, I'm a new user here, it is nice to meet u all.
So straight to the point, currently I'm suffering a few problems with my Xperia ZL.
To make it clear, at first, I send my phone to a shop to replace my damaged sim tray.
At that time, there is no any problem with my ZL except the sim tray (therefore no signal, cannot makes call etc)
But when I received my phone, it comes with these problems:
-no sound from speaker, there is sound if I plug in earphone/earpiece
-no vibration
-no secondary camera function in the camera software
-mic is not working
I've entered the code *#*#7378423#*#* to confirm the problem and yes, the problem exist. In addition, when I try to test my secondary camera in the test menu, it shows ''this device does not support this function''.
The sim tray problem is solved, but disappointingly other problems rise.
I try to call the shop (online service) and they refuse to fix these problems even they are the one who cause it!
They said it is a root problem (it is my first time to hear the term).
PLEASE GUYS, I NEED HELP, WHAT I AM SUPPOSED TO DO IF THIS IS A SOFTWARE PROBLEM...? :crying: :crying:
additional data:
============
model number C6502
android 4.3
baseband 9x15A-ACEFWMAZQ-30110082-51
kernel 3.4.0-g1b44cd5
build number 10.4.B.0.569
Update 2/7/14...
I have updated my phone to KitKat 4.4.2 but sadly the update doesn't fix my phone problems...
Please anyone I need your help here :crying:
Hi
Please download the 4.3 FTF from the xda thread and flash it back using Flash tool.
I faced the same issue with 4.4.2(US version) and reverted back to 4.3 and it worked
Hopefully the issue is now fixed with new indian update
regards
Hitesh Pande
hitesh.pande said:
Hi
Please download the 4.3 FTF from the xda thread and flash it back using Flash tool.
I faced the same issue with 4.4.2(US version) and reverted back to 4.3 and it worked
Hopefully the issue is now fixed with new indian update
regards
Hitesh Pande
Click to expand...
Click to collapse
Hello Hitesh, thanks for your reply.
I just want to double confirm, do u faced the same problems like me? I mean the problem with no vibration, no front camera and no sound from speaker?
How do u get the problems? Is it from the kitkat update?
I just want to clarify that my problems didnt arise from kitkat update. Its already there before i update to kitkat. I'm afraid downgrading to 4.3 wont solve the problems.
I had only problems with speaker and not the front camera and other things
one of my collegue had issue with camera and it was fixed by giving it to sony service centre
I think you might have to go back to Sony service centre
all the best!!
hitesh.pande said:
I had only problems with speaker and not the front camera and other things
one of my collegue had issue with camera and it was fixed by giving it to sony service centre
I think you might have to go back to Sony service centre
all the best!!
Click to expand...
Click to collapse
Thanx mate.
I am trying my best to solve the problem first by myself. I would as much as possible from xda forum and let say there is nothing i can do rather than sending it to the expert, then i will send it.
I really hope i can save my money by fixing the software by myself. Haha :laugh:
Q&A for [ROM][UB][Linaro][KitKat][4.4.4]Carbon Rom[Unofficial]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Camera app replacement
Hey guys, thanks for the Carbon Rom - looks real good, is nice & fast.
I have one question.
I've installed Google Camera and I liked it better than default CM one. I tried to freeze CM camera so that Google Camera would be default everywhere, but pressing hardware camera button doesn't work (there is only a one-time vibro, camera doesn't launch, when CM is defrost it launches, obviously).
Is there any way I can set Google Camera to launch via hardware button? I'd like to delete CM camera to keep everything neat & tidy.
Thank you guys in advance!
Problem with Carbon rom
Hi, I'm new at this and I had a problem when I installed your rom on my Xperia S. I managed to root it and install CWM perfectly... But when I flashed your rom, without any problems, and tried to reboot, the phone never rebooted. I just stays with the screen off and when I press the power on button for a while it only vibrates and that's it. I used to have the official Xperia 4.1.2 rom. HELP!!!!
If unlocked bootloader, maybe you should flash tft.
You can have a look at the main thread someone has the same problem....
I'm trying to build carbon rom for aoba (Ion), I have ths error :
out/target/product/aoba/obj/SHARED_LIBRARIES/libOmxVenc_intermediates/venc/src/omx_video_base.o] Erreur 1
Anyone knows about you this problem ?
Please help
please help me, my earphones cannot be detected after clean install. but is working with the stock rom,
lexjay said:
please help me, my earphones cannot be detected after clean install. but is working with the stock rom,
Click to expand...
Click to collapse
I think this problem is known.
Which earphones are you using?
I think newer ones are not supported because of missing drivers but i am not sure.
HDMI
Is it hard to make hdmi support? I use 4.1 only for hdmi. There are another 4.4 roms with hdmi, but carbon is best.
Akimov said:
Is it hard to make hdmi support? I use 4.1 only for hdmi. There are another 4.4 roms with hdmi, but carbon is best.
Click to expand...
Click to collapse
Yes it is hard to support hdmi since, afaik, there was no proper support built for it in the sources used by carbon.
build fails on OMX codec
Hi all!
Has anyone tried to build the ROM from sources?.. well I have and it fails while building the obj for OMXCodec --> OMXCodec.cpp:4569 --> frameworks/av/media/libstagefright/OMXCodec.cpp:4569:11: error: 'OMX_AUDIO_PARAM_FLACTYPE' has no member named 'nBitsPerSample'
If anyone met the same problem and fixed it, please share the fix/work-around.
So far i've edited OMX_Audio.h and inserted an OMX_U32 nBitsPerSample var in the OMX_AUDIO_PARAM_FLACTYPE struct.
It compiles on, but i'm not sure this is Ok.
Thanks!
negreamp said:
Hi all!
Has anyone tried to build the ROM from sources?.. well I have and it fails while building the obj for OMXCodec --> OMXCodec.cpp:4569 --> frameworks/av/media/libstagefright/OMXCodec.cpp:4569:11: error: 'OMX_AUDIO_PARAM_FLACTYPE' has no member named 'nBitsPerSample'
If anyone met the same problem and fixed it, please share the fix/work-around.
So far i've edited OMX_Audio.h and inserted an OMX_U32 nBitsPerSample var in the OMX_AUDIO_PARAM_FLACTYPE struct.
It compiles on, but i'm not sure this is Ok.
Thanks!
Click to expand...
Click to collapse
Yeah well I tried to build it too yesterday evening, but I'm not getting any error nor the output zip file! Where did You find the error?
Mmmm... I don't really remember.
I was building the project just like in the 'how to' (I mean literally, step-by-step), and it just crashed at that point.
However, it turns out that there is another external module that is not supported and should not even be in the sources. Let me know if you encounter the same problems.
I have been using this rom for about a month now, good so fare.
But since a couple of days I'm starting to have some bugs (like the music lagging and even stopping when I'm doing other things on my phone) and some lags from time to time. Sometimes it's really smooth, but most of the time it's very slow and not confortable to use.
Any ideas how I could speed it up and make it smoother ? I already overcloked it
help the stock launcher keeps reseting after reboot
VoIP issue
hi all,
i am ussing carbon rom 4.4.4 on my xperia s lt26i, every thing is good but viber does not work!!!!
Changelog of today built?
thx
thx for the new build
is viber work on this last build!!!!!
Sync contact
Hi, how can i sync my contact from google accounts?
And is able to use Google Play on this rom?
Thanks!
Carbon 0808
Hello,
can anyone please upload Carbon version 0808. On link is not any more for download.
Thanks in advance.
@Darth Inferno can you please upload previous kernel from previous build