Originally had the default verizon black holster case, but got an aluminum back and a clear cruzerlite case to show it off.
I still wanted to holster the phone so I tryed to put it in the holster and it still fit.
I think its a good look!
very nice
that's a very good combination you got going there:good:
Very good
VZW GALAXY S 3 4G LTE
Related
I am looking for a horizontal holster that will work with my silicone case on the Captivate. I sent a note to Amzer and they replied that they don't have a compatible case. I am still using my Palm Treo holster that I have used for my Tilt and Tilt2. It fits sort of, but it can be a struggle to get it out.
Does anyone know of a holster that will hold a Captivate that has a silicone case?
Well I am looking for the same thing. I purchased the Body Glove snap on case with Holster, which is nice, but it sticks out from your side so far that I actually hit a door jam with it. Also I don't like the fact that it has my screen facing out, so I went back and put my body glove mirage case on.
I am about to head to the verizon store and look at holsters they have for the droid x. My step mother has the droid x and she got a case/holster set with it, the holster fits my phone fantastic, but its just a plastic holster. Problem of course is you would have to purchase the combo set, which means the case is useless for our phones.
Like I said, I am going to look now at the Verizon store and see what they have.
OK guys..
Need some tips for selecting which case I should get for my GN. I want my phone to be as sleek as possible with the case on. Using stock battery.
Now, not many shops are stocking accessories yet for the GN. So I have to give eBay a go this time around.
I have shortlisted these two cases:
BLACK GEL S Line TPU Hybrid Cover Case Skin for SAMSUNG GALAXY NEXUS I9250
Black Soft S TPU Silicone Case Cover Skin for Samsung i9250 Galaxy Nexus
Is there any difference between the above two cases ? They have the same pictures and description. Just the title is different. :/
How are the above cases different from the Diztronic mentioned below ?
Diztronic Samsung Galaxy Nexus Matte Back TPU Case Gel Cover & Screen Protector
Thanks
Im rocking the black and clear Andy from site listed below. Do understand any case will add some bulk but this one is very little. Also adds nice protection to the front in case you drop it to protect the screen from cracking.....it doesnt have the volume keys cut out but it doesnt bother me....plus its not rubber so no lint being stuck
http://www.amazon.com/s/ref=nb_sb_noss?url=me=A1OK9R8S7S5URY&field-keywords=galaxy+nexus&x=0&y=0
Also, he said he has a new case coming out that I will def be checking out once it comes out. You can see a preview here
http://forum.xda-developers.com/showpost.php?p=20690082&postcount=40
I have one of those first one, the S TPU case and I think it is a perfect case. The added grip at the sides make it very comfortable to hold without fear of dropping it. Go for it
Otterbox Commuter
Sent from my (GSM) Galaxy Nexus using Tapatalk
http://attachments.xda-developers.com/attachment.php?attachmentid=808558&d=1323273741
try this thin and nice
http://forum.xda-developers.com/showthread.php?t=1375202
Anyone have a side case with a solid belt clip that they are using with a Diztronic (TPU-cases)?
I have been trying the pocket and shirt pocket but so far its driving me nuts. I think I need to go back to a belt holster but I like my current case so im looking into holsters like this:
http://www.shopandroid.com/ecolife-hydro-side-case/4A120A8418.htm
The issue I have with many of this style is the poor belt clip lacking something from the bottom to keep it from sliding off.
Verizon sells one. Back before the LTE version came out, I walked into a local store with my GSM version and had them pull out whatever accessories they had that could work.
It's the biggest generic one they sell, ~$20. It's got a clip, not belt loops. I have a Diztronic TPU case on mine, and it stretched the case quite a bit, but at least it fits. The salesperson had a RAZR with a case, and her's also just barely fit (they're almost the same height).
I personally am looking now at the plastic holsters where you can snap in the cased phone.
Seidio makes really good holsters that sometimes can accept other cases on them . The draw back is Seidio is very proud of their cases and holsters . Im sure there will be cheaper alternatives coming out shortly .
There's a nice thread on this forum that summarizes 4-5 different holsters. The Seidio one is about $25 or so, without the case even. There's a real cheap $7+ one from htcpedia, which I have incoming, but reviews have not been good =P.
the siedio surface holster fits a tpu case pretty well. i added some "shims" to tighten it up some using the loop part of velcro on the bottom retainer tabs of the holster and it fits perfectly.
it's actually my current combo that i'm using.
I needed something until the Kraken is released or I decide to pull the trigger on the Seidio Active Case Combo. Stopped by TMo and picked this up to tide me over. Nice tight fit and the cover feels like sueded newborn baby butt. The ability to lay it face down exists but just barely so.
I bought one when I picked up the Galaxy III from the T-Mobile store and it seems to me to be a nice case. Will certainly do for me until the Otterbox Commuter comes out.
I bought one, its good so far Not to bulky yet adds a little something to grasp
Just wondering if anyone has tried to match the two of these together....
I purchased a Diztronic TPU case for my Nexus 5 - I would like to place it into a Seidio Surface holster while I am at work.
Does anyone know if the Diztronic and the Seidio holster work together with the Nexus 5?
Thanks
Well my Surface holster just showed up tonight and my guess is it would be a no go. The stock bumper case fits but extremely tight on the bottom. My Ringke fusion case is a little more snug then the official bumper case. Both are a little to thick. Prefect fit side to side and height wise. I had an active holster and Ringke e fusion for my N4 and was sloppy so I figured I would try the surface holster. Taking my holster in to work tomorrow and pull out the die grinder and do some trimming and I think it will fit perfectly after take a little bit out of the bottom of the holster. I hope this helps you out.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Thanks for the input and just wondering if others have found a solution. Keep me updated on your mods.....
Dekan54 said:
Thanks for the input and just wondering if others have found a solution. Keep me updated on your mods.....
Click to expand...
Click to collapse
I use a Seidio Surface holster with my cruzerlite cases without problems. see my attached pic
yocubed said:
I use a Seidio Surface holster with my cruzerlite cases without problems. see my attached pic
Click to expand...
Click to collapse
@yocubed
That is what I would like to do except with a Diztronic TPU case - Just wondering if anyone else has these two and how they work / fit together.
Thanks
Dekan54 said:
@yocubed
That is what I would like to do except with a Diztronic TPU case - Just wondering if anyone else has these two and how they work / fit together.
Thanks
Click to expand...
Click to collapse
I don't have the Diztronic case but I did have both the Cruzerlite and Diztronic cases for my EVO 4G LTE and they both worked flawlessly with the seidio surface holster for that phone. My assumption is that the Diztronic would work fine with the surface holster like the cruzerlite cases do
yocubed said:
I don't have the Diztronic case but I did have both the Cruzerlite and Diztronic cases for my EVO 4G LTE and they both worked flawlessly with the seidio surface holster for that phone. My assumption is that the Diztronic would work fine with the surface holster like the cruzerlite cases do
Click to expand...
Click to collapse
I just got the Diztronic TPU for my Verizon LG G2, and it fits PERFECTLY in the Seidio Surface holster!!!! The Nexus 5 is basically the same phone as the G2, so I am 99% sure it will be fine for you.
I would point out that the only thing that's a little awkward is that the non-slip "grip" of the TPU material is so grippy that you can't easily "pop the phone in" past the hinged clip - you have to lift the hinge back with one finger, put the phone in, and then let the clip spring back over the phone. Not a big deal, but just "different". I guess I'll have to learn a new hand motion.