Related
Hi Guys,
Sorry to be such a noob, but i really need some help...
I have tried flashing this: http://forum.xda-developers.com/showthread.php?t=1526717
using the Xperia version of CWM recovery, follwing the instructions on screen t the letter, i still cannot get this to work. Can someone please shed some light on my problem???
I have no issues with re-flashing 2.3.4 again, phone is rooted with unlocked bootloader, flashed on 4.0.2.A..0.42/.62 and still only end up with a non working ICS, please help
If you're trying to flash this rom from gingerbread you'll end up with troubles. Flash first a stock ics with flashtools /pc companyon /seus and then you can flash this one.
garisan said:
If you're trying to flash this rom from gingerbread you'll end up with troubles. Flash first a stock ics with flashtools /pc companyon /seus and then you can flash this one.
Click to expand...
Click to collapse
Thanks for this, but stock ics is not yet available in nz, any links you could share for download will be greatly appreciated
Started from gingerbread too.
Hy, i have also upgraded from Gingerbread and i have had some issues with some Roms. But now it`s done and working like a charm. Here are the stept i folowed :
1. Unlock bootloader.
2. Check baseband (mine was 64, so no more stept necesary for performing step 3)
3. Flash kernel via fastboot (cmd command on android sdk/platform tools, with v4 usb drivers), Doom Kernel (1.6GHz) ARC-DooMKernel-ICS-BETA-v04-lower-boot.img
4. Flashed multiple Roms, but the best, for me is JJHybrid Rom v2.2
5. Flashed ARC-DooMKernel-ICS-v04-modules_CWM.zip (WIFI module)
6. Flashed GAPS
When flashing Rom i have notice that not everibody tells all the procedure :
- Boot in flash mode (Press Back key when blue led light on)
- Perform a wipe
- Perform a reset
- advanced/ wipe dalvik cache
- mount and root/ format /system
- install from zip, first rom, then modules.
Hope that you can find sommething you missed (probably the format /system) and my answer helped you !
Marmalux said:
Hy, i have also upgraded from Gingerbread and i have had some issues with some Roms. But now it`s done and working like a charm. Here are the stept i folowed :
1. Unlock bootloader.
2. Check baseband (mine was 64, so no more stept necesary for performing step 3)
3. Flash kernel via fastboot (cmd command on android sdk/platform tools, with v4 usb drivers), Doom Kernel (1.6GHz) ARC-DooMKernel-ICS-BETA-v04-lower-boot.img
4. Flashed multiple Roms, but the best, for me is JJHybrid Rom v2.2
5. Flashed ARC-DooMKernel-ICS-v04-modules_CWM.zip (WIFI module)
6. Flashed GAPS
When flashing Rom i have notice that not everibody tells all the procedure :
- Boot in flash mode (Press Back key when blue led light on)
- Perform a wipe
- Perform a reset
- advanced/ wipe dalvik cache
- mount and root/ format /system
- install from zip, first rom, then modules.
Hope that you can find sommething you missed (probably the format /system) and my answer helped you !
Click to expand...
Click to collapse
Thanks for this friend, i was only using a stock rom, will find dwnloads for the kernel mentioned above.
I did all of these instruction except I have no idea how to roo once i boot into recovery as the xperia CWM does not have this function and for some reason no other recovery will work on my arc.
Will download DoomLoords kernel and see how that goes...Cheers
reignzy said:
Thanks for this, but stock ics is not yet available in nz, any links you could share for download will be greatly appreciated
Click to expand...
Click to collapse
Here you have the download links for the rom and flashtool
http://forum.xda-developers.com/showthread.php?t=1598072
Thanks to all who helped with my problem, turns out my phone was in fact "not boot loader unlocked" but it is now
Found out where I was going wrong with flashing kernels as well
Once again, a very big thanks to all that helped
Sent from my LT15i using XDA
hello
sorry for bad english
will i've follow the steps to install pacman ROM on my sl
" nozomi_PAC_JB_4.2.2-v20.1.0_Themed v2 "
now i wont to install " XZXperience_2_3 "
i've downloaded it and copy the zip file to sdcard ,, open recovery mode in CWM and install it
the problem that when i started the phone the pacman logo appers and after that give me black screen and nothain happen
tried also the stock 6.a.2.55 as zip in the same way and give me the same thing
help plzzzzzzzzz
what can i do to restore my phone ?!?!?!?!!
Pull the boot.Img from the pac zip and fastboot it. Then install the zip via twrp recovery. Make sure you wipe cache, dvalik, android secure, and data (everything but internal storage)
Then flash.
Then boot up.
Then reboot back to recovery and flash gapps
Then boot up again
Sent from my 4.2.2 Xperia S via Tapatalk
now you want to install XZXperince yeah?
try this
1.Backup all your data
2.Flash Stock ICS ROM(6.1.A.2.50) or custom ICS Kernel(Like XSX or Advanced ICS Kernel
3.Go to recovery(If no,try custom ics kernel
4.Wipe Data,Cache ,then Flash XZXperince
5.Reboot
6.Enjoy
Ben36 said:
Pull the boot.Img from the pac zip and fastboot it. Then install the zip via twrp recovery. Make sure you wipe cache, dvalik, android secure, and data (everything but internal storage)
Then flash.
Then boot up.
Then reboot back to recovery and flash gapps
Then boot up again
Sent from my 4.2.2 Xperia S via Tapatalk
Click to expand...
Click to collapse
Speka-3- said:
now you want to install XZXperince yeah?
try this
1.Backup all your data
2.Flash Stock ICS ROM(6.1.A.2.50) or custom ICS Kernel(Like XSX or Advanced ICS Kernel
3.Go to recovery(If no,try custom ics kernel
4.Wipe Data,Cache ,then Flash XZXperince
5.Reboot
6.Enjoy
Click to expand...
Click to collapse
thank you both
i've soved it myself
with flash tool
flash the orgnial ICS .55 and install recovery ics14.elf by fastboot and the installed the ROM
thanks ^_^
Hi all, I also want to try the PAC 4.2.2 Rom, so like a good little noob I've been searching everywhere to find out if I need to open the zip in my pc & fastboot the .img first as I have a different/wrong kernel, I've got cm10 fxp 212 on my xperia s.
So far this is the only place I've seen it mentioned.
Could anybody confirm it please?
& the run command if you know it.
Thanks.
Noobs of the world unite!
Memethecat said:
Hi all, I also want to try the PAC 4.2.2 Rom, so like a good little noob I've been searching everywhere to find out if I need to open the zip in my pc & fastboot the .img first as I have a different/wrong kernel, I've got cm10 fxp 212 on my xperia s.
So far this is the only place I've seen it mentioned.
Could anybody confirm it please?
& the run command if you know it.
Thanks.
Noobs of the world unite!
Click to expand...
Click to collapse
1. Open zip file and copy boot.img to fastboot folder
2. Right click and select " Open cmd here" (Win7)
3. Type these commands
- fastboot flash boot boot.img (Wait when its done after few sec)
- fastboot reboot ( or unplug the cable and turn on your phone)
4. Now, boot into CWM to flash Rom
Take notice that you have to install fastboot driver first. Good luck :fingers-crossed:
Memethecat said:
Hi all, I also want to try the PAC 4.2.2 Rom, so like a good little noob I've been searching everywhere to find out if I need to open the zip in my pc & fastboot the .img first as I have a different/wrong kernel, I've got cm10 fxp 212 on my xperia s.
So far this is the only place I've seen it mentioned.
Could anybody confirm it please?
& the run command if you know it.
Thanks.
Noobs of the world unite!
Click to expand...
Click to collapse
if you have a CWM Recovery in your kernel(like FXP's CM9 or CM10 kernel)
just copy the zip(you download from the PAC thread) to the internal storage
then boot into CWM, wipe,flash the zip,enjoy
recovery will flash boot.img automatically
if no work, try flash the boot.img manually, like the way on 6# reply
Lilude & Speca, thank you both for a quick reply, btw, your English is perfect.
Wow! So a different kernel can be flashed with the rest of the packet from recovery/cwm without needing a pc, (except for copying to sd card) .
A new bit of knowledge for me!
I'd click your thanks buttons if I knew how, but as you can see I'm new to the forum & still finding my way about.
Noobs of the world unite.
Both ways are fine but better flash separately in such situation. It definitely helps you avoid a broken CWM happening after that such as : can't backup the current Rom, can't mount system as well as can't flash anything, etc.. aside from having to reflash Stock Rom,otherwise the phone gonna get stuck on boot . How terrible !
Make your choice and do not mess up your phone, huh ?
Sent from my Xperia S using Tapatalk 2
If you say flashing the boot.img from my pc first is the safest option then I'll use that method.
I've already messed up several times when I was in stock, without a recovery, luckily EMMA came to the rescue.
Since custom rom cm10 I can't flash updates or anything else without a factory reset, partition & dalvic wipe is never enough.
So taking my time for this rom, download tonight, fingers crossed
______
Xperia s : fxp 212 nozomi
++++++++++++++++++
OK!
flashed boot.img
wiped everything
fixed permissions
mounted system
flashed PAC
rebooted
went back to recovery
flashed gapps
rebooted.
Works perfectly so far!
also I reinstalled my own apps manually instead of using titanium back up. I read this hint in the PAC v22 thread / dev section.
maybe this is 1 of the reasons I'm not having the odd problem that a few others are experiencing. who knows?
thanx all for helping
......................
Xperia S : PAC v22
hi
this is the first time i am trying to install a custom rom. after reading a lot i never tried to actualy modify my arc s, but today was the day!
i tried with this one: http://forum.xda-developers.com/showthread.php?t=1920207
now i have some specific questions to find out why i am getting a bootloop (screen gets black and shows "SONY" over and over again).
right now i am on stock rom and kernel again: model: LT18i / android 4.0.4 / kernel 2.6.32.9-perf [email protected] #1 / build 4.1.B.0.587
i followed the how-to in the thread in every step besides one: "For Locked Bootloaders: Root your phone using this tutorial, than install CWM using this app" i did not use the linked tutorial because at first i just wanted root and found this "one click" method: http://forum.xda-developers.com/showthread.php?t=2219711
this method worked for me and i already was able to use superuser. having a working superuser app i decided to go on with the tutorial and used x-parts to install CWM.
after that i did everything like in the how-to, going through the aroma installer, successfully installed the rom, reboot through the recovery menu -> bootloop.
after many hours and tries i decided to open a thread and hope that someone can help me to solve my problem.
thanks!
EDIT: about the bootloader. on my device it says "bootloader unlock allowed: yes" and the number that is mentioned here: http://forum.xda-developers.com/showthread.php?t=2375463 for me is 12W20
can i unlock the bootloader or not? i am realy confused with everything right now...
genesis86 said:
EDIT: about the bootloader. on my device it says "bootloader unlock allowed: yes" and the number that is mentioned here: http://forum.xda-developers.com/showthread.php?t=2375463 for me is 12W20
can i unlock the bootloader or not? i am realy confused with everything right now...
Click to expand...
Click to collapse
Yes, you can still unlock the bootloader, by using the official method at unlockbootloader.sonymobile.com.
thanks for your reply. in the roms thread it says that it can be installed with locked bootloader.
i have root and superuser works. next i used this: (imagine a link to google play x-parts :laugh to install cwm and then i continued with the how-to as it says:
...
Place ROM on SD-Card
Back up user apps and data. (Various apps available, search Google Play. This is a popular one)
Power off phone.
Boot to CWM (Keep pressing the Volume Down key after the Sony logo appears)
Wipe Data/Factory Reset
Mounts and Storage --> Format /System
Advanced > Wipe Battery Stats
Install zip from SD card > Choose Xperia Ultimate HD
Follow on screen instructions on AROMA.
After Complete Installation untick "reboot" and select reboot in CWM
any idea why i get a bootloop after installing the rom? oh...and i still don't get it how to start my phone directly in cwm recovery. i tried to push or hold different buttons. right now i saw the recovery menu only because i chose to reboot to recovery in the x-parts app. sorry, if similar questions have been already asked, but i don't get it
EDIT: is the kernel and/or stock rom a problem maybe? can i install the custom rom starting from: model: LT18i / android 4.0.4 / kernel 2.6.32.9-perf [email protected] #1 / build 4.1.B.0.587?
Did you flash this? I never tried install any kernel or ROM on locked bootloader, so my phone is unlocked. I read this tutorial and i succesfully installed this ROM on my ARC without bootloop. BTW i using LuPuS v16 kernel, not vengeance...
genesis86 said:
thanks for your reply. in the roms thread it says that it can be installed with locked bootloader.
i have root and superuser works. next i used this: (imagine a link to google play x-parts :laugh to install cwm and then i continued with the how-to as it says:
...
Place ROM on SD-Card
Back up user apps and data. (Various apps available, search Google Play. This is a popular one)
Power off phone.
Boot to CWM (Keep pressing the Volume Down key after the Sony logo appears)
Wipe Data/Factory Reset
Mounts and Storage --> Format /System
Advanced > Wipe Battery Stats
Install zip from SD card > Choose Xperia Ultimate HD
Follow on screen instructions on AROMA.
After Complete Installation untick "reboot" and select reboot in CWM
any idea why i get a bootloop after installing the rom? oh...and i still don't get it how to start my phone directly in cwm recovery. i tried to push or hold different buttons. right now i saw the recovery menu only because i chose to reboot to recovery in the x-parts app. sorry, if similar questions have been already asked, but i don't get it
EDIT: is the kernel and/or stock rom a problem maybe? can i install the custom rom starting from: model: LT18i / android 4.0.4 / kernel 2.6.32.9-perf [email protected] #1 / build 4.1.B.0.587?
Click to expand...
Click to collapse
Flash stock again
Root
And try again
Do a full wipe i.e wipe data, battery stats, and system then flash again, plz pick right options in aroma like locked bootloader, and then untick reboot in aroma and reboot thru CWM
Sent from my LT18i
HUD 4.0 boot loop on xperia arc s
Hi,
I have same problem, when I upgrade my xperia arc s from UHD 3.0.2 to 4.0 I get boot loop.
I have locked boot loader and UHD3.0.2 installs fine and don't get any boot loop. I tried both option upgrade and complete install for UHD 4.0 but no luck.
Any one can help me out?
thanks
imcupid said:
Hi,
I have same problem, when I upgrade my xperia arc s from UHD 3.0.2 to 4.0 I get boot loop.
I have locked boot loader and UHD3.0.2 installs fine and don't get any boot loop. I tried both option upgrade and complete install for UHD 4.0 but no luck.
Any one can help me out?
thanks
Click to expand...
Click to collapse
Tried full wipe? Which phone, kernel? If ARC or ARC S, try flash .ftf file, kernel and try install UHD 4.0. Look my previous post in this thread.
Sahaab said:
Flash stock again
Root
And try again
Do a full wipe i.e wipe data, battery stats, and system then flash again, plz pick right options in aroma like locked bootloader, and then untick reboot in aroma and reboot thru CWM
Sent from my LT18i
Click to expand...
Click to collapse
thanks for trying to help. after doing the same thing over and over again i decided to try a different rom and it works. i just wiped everything you need to wipe for installing a new rom and i am now on jelly dream 4.5 and the kernel from the step by step tutorial (Kernel_Vengeance_Ayame.zip).
offtopic: i could not find a support thread for jelly dream and i can't post in the mainthread. is there a q&a thread for this rom or should i open a new topic?
Kepta Duona said:
Tried full wipe? Which phone, kernel? If ARC or ARC S, try flash .ftf file, kernel and try install UHD 4.0. Look my previous post in this thread.
Click to expand...
Click to collapse
thanks for the tft file, I flashed that one and after install UHD 4.0. It worked fine.
thanks for helping me out.
Hiii
You can use the Flashtool Version 0.9.11.0 [Thanks to Androxyde :good:]
There are things in this application. Include: Root device, Bootloader Unlock, Flash kernel and Flash ROM.
By fastboot mode in Flashtool you can install any kernel and after turn on your device using CWM and install any ROM.
In here you can find many ROMs and Kernels [Thanks to Xerxin :good:]
Hi,
I have tried everything I've read so far and I still can't get the phone to boot into recovery.
I flashed the latest Stock ROM using Sony Ericsson 'Emma' flashtool.
Then I rooted using eroot and I have confirmed the root with the app Root Checker.
I installed ROM Manager but it says my device isn't recognised.
Also installed X-Parts and even though that said ClockWorkMod install was successful it still won't boot into recovery.
I have tried holding down various combination of keys whilst powering up but I don't even see a blue light appearing.
Is there any way to get CWM onto my Xperia Arc (LT15i) please?
Thanks for any advice
Flash a kernel that has CWM using fastboot.
僕のLT18iから送られてきた
popthosegaskets said:
Flash a kernel that has CWM using fastboot.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Hi popthosegaskets, thanks for replying. How would I go about finding the right kernal and how do I flash the phone if I can't get into recovery please?
I did flash my phone before with CM 9 but I've completely forgotten how to do it.
Thanks again
GoodGosh said:
Hi popthosegaskets, thanks for replying. How would I go about finding the right kernal and how do I flash the phone if I can't get into recovery please?
I did flash my phone before with CM 9 but I've completely forgotten how to do it.
Thanks again
Click to expand...
Click to collapse
The kernel will depend on your ROM, so if you're using stock ROM you can flash a stock kernel with CWM on it. LuPuS stock kernel and Advanced stock kernel are two examples of stock kernel that have CWM.
Most custom ROM kernel should have CWM installed. Custom ROM will also come with its kernel so flash that and you should have CWM on your phone.
僕のLT18iから送られてきた
popthosegaskets said:
The kernel will depend on your ROM, so if you're using stock ROM you can flash a stock kernel with CWM on it. LuPuS stock kernel and Advanced stock kernel are two examples of stock kernel that have CWM.
Most custom ROM kernel should have CWM installed. Custom ROM will also come with its kernel so flash that and you should have CWM on your phone.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
Hi popthosegaskets, thanks very much for helping me. I was wondering if you could tell me where I'm going wrong trying to install a CM Rom please. I've tried both CM 9 and CM 10 but the former caused the boot screen to flicker and flash and when I tried to install CM 10 I just got an error in CMW saying error in sdcard/cm10.zip (status 7).
The problem stems from me experimenting and putting on the Jellybeanv4 Rom. I found that the Settings button didn't function and overal performance was slow so that is why I'm trying to flash back to a Stable CM Rom.
These are the instructions I followed using flashtool.
1. Download rom, patch and gapps from Downloads and put in SD card
2. Flash Xperia Arc S 4.1.B.1.13 Vodafone DE firmware via flashtool (For increasing system and data memory for Arc user and latest BB) Must
3. Flash included FXP kernel or any CM10 based kernel using fastboot
4. Boot into CWM
5. Wipe factory reset (Data & Cache)
6. Go mounts and storage
7. Format /system
8. Flash rom then patch and at last gapps
9. Reboot
10. After booting 1 time you can flash addons if you want
Is it a problem with a conflict with the Vodafone DE Firmware and CM Rom?
Thanks again for your help and advice
I have same problem...
Same rom and same instalation guide...
Any solution to get in CWM?
GoodGosh said:
Hi popthosegaskets, thanks very much for helping me. I was wondering if you could tell me where I'm going wrong trying to install a CM Rom please. I've tried both CM 9 and CM 10 but the former caused the boot screen to flicker and flash and when I tried to install CM 10 I just got an error in CMW saying error in sdcard/cm10.zip (status 7).
The problem stems from me experimenting and putting on the Jellybeanv4 Rom. I found that the Settings button didn't function and overal performance was slow so that is why I'm trying to flash back to a Stable CM Rom.
These are the instructions I followed using flashtool.
1. Download rom, patch and gapps from Downloads and put in SD card
2. Flash Xperia Arc S 4.1.B.1.13 Vodafone DE firmware via flashtool (For increasing system and data memory for Arc user and latest BB) Must
3. Flash included FXP kernel or any CM10 based kernel using fastboot
4. Boot into CWM
5. Wipe factory reset (Data & Cache)
6. Go mounts and storage
7. Format /system
8. Flash rom then patch and at last gapps
9. Reboot
10. After booting 1 time you can flash addons if you want
Is it a problem with a conflict with the Vodafone DE Firmware and CM Rom?
Thanks again for your help and advice
Click to expand...
Click to collapse
Sorry for very late reply, but it should not be a problem with DE firmware. Download the file again and try to install it following the steps.
iggy1974 said:
I have same problem...
Same rom and same instalation guide...
Any solution to get in CWM?
Click to expand...
Click to collapse
僕のLT18iから送られてきた
Solved boot in CWM
popthosegaskets said:
Sorry for very late reply, but it should not be a problem with DE firmware. Download the file again and try to install it following the steps.
僕のLT18iから送られてきた
Click to expand...
Click to collapse
I've found solutions for LT18i
downloaded kernel
http://goo.im/devs/nAa/kernels/3.4.x/jb/anzu/3.4.45-nAa-03_LT18.img
i try to root me z1 compact (i have unlocked the bootloader) but i forget to save th superuser zip into sd card....i wwant in fastboot mode and i didn t innstall the zip.........and now i am stuck on fastboot mode...and i haven t do backup..what can i do ?plz help
Could you use an external SD card reader and plug to your PC to copy the file you need? then reinsert into your phone.
how?
mkhairym said:
Could you use an external SD card reader and plug to your PC to copy the file you need? then reinsert into your phone.[/QUOTE
man i copy the supersu in the sd card but when i choose zip i press update superSU and it writes ......done
and when i prees reboot system now it gets me into recovery mode again
Click to expand...
Click to collapse
thanos kary said:
mkhairym said:
Could you use an external SD card reader and plug to your PC to copy the file you need? then reinsert into your phone.[/QUOTE
man i copy the supersu in the sd card but when i choose zip i press update superSU and it writes ......done
and when i prees reboot system now it gets me into recovery mode again
Click to expand...
Click to collapse
well a bit more info would help, like on what rom you were on, and what steps you followed? At least you're able to boot into recovery, which lets you flash other roms since you've unlocked the BL
Click to expand...
Click to collapse
listen
darkmystel said:
thanos kary said:
well a bit more info would help, like on what rom you were on, and what steps you followed? At least you're able to boot into recovery, which lets you flash other roms since you've unlocked the BL
Click to expand...
Click to collapse
listen ...i haven t done buckup and i haven t flash my rom......my phone can get in to the recovery mode ONLY....can i get out from the recovery mode ?:crying:
Click to expand...
Click to collapse
Well if you have access to your recovery you should be able to mount your SD card there and then connect it to your PC. From there you can transfer a zip file to your phone and flash it.
I don't see anything mentioned about which custom recovery he flashed.
Could this be a stock recovery that he is in? (that may not allow mounting etc.)
.....
LaZiODROID said:
I don't see anything mentioned about which custom recovery he flashed.
Could this be a stock recovery that he is in? (that may not allow mounting etc.)[/QUOTE
i have done this....... and then what? i have 4.4.4 android
This is a CWM-Based Recovery 6.0.4.6 Touch Recovery for Xperia Z1 Compact!
Credits and special thanks to Koush and everyone else involved in Cyanogenmod project!
[ info ]
This Recovery is built from CWM 6.0.4.6 sources!
I dont have this device with me and I dont intend to buy one... my friend wanted root on his phone so I created this to help him out...
all the testing was done remotely on users devices...
[ PROOF ]
[ credits / special thanks ]
Koush - for the brilliant work & coding on CWM recovery
CyanogenMod and FreeXperia Team (especially jerpelea) for too many things *
special thanks to @swedan for helping out with testing and risking his devices for the sake of development!!! and NO, his phone was NOT damaged during testing
ME for creating this for u guys!
[ Requirements ]
Bootloader unlocked
working fastboot
STOCK ROM FW:
4.4.2
14.3.A.0.757 - v04
14.3.A.0.681 - v03
4.3
14.2.A.1.142 - v02
14.2.A.1.114 - v01
or ROMS BASED ON THAT FIRMWARE
[ features ]
standard CWM recovery 6.0.4.6 - TOUCH RECOVERY!
kernel is insecure (ro.secure=0)
adb debugging is enabled by default in OS
TIP: if u are experiencing very slow backup in CWM do this
[ WARNING ]
for flashing this kernel you WILL NEED TO UNLOCK BOOTLOADER! Check this thread for more info (same steps as Xperia Z1 are used for Xperia Z1 Compact)
UNLOCKING BOOTLOADER WITHOUT TA BACKUP WILL LEAD TO IRREVERSIBLE LOSS OF DRM KEYS!!!
AND YES CAMERA STILL WORKS AFTER UNLOCKING BOOTLOADER!!!
[ known issues ]
adb is not working in recovery (can be fixed later)
[ how to flash this kernel ] (via fastboot)
download the kernel image
save the boot.img to the folder containing fastboot binary
flash the boot.img using fastboot:
Code:
fastboot flash boot boot.img
reboot from fastboot
Code:
fastboot reboot
the device should now start booting
enjoy!
Click to expand...
Click to collapse
....
darkmystel said:
thanos kary said:
well a bit more info would help, like on what rom you were on, and what steps you followed? At least you're able to boot into recovery, which lets you flash other roms since you've unlocked the BL
Click to expand...
Click to collapse
yes i get into recovery and then what i must do?
Click to expand...
Click to collapse
thanos kary said:
darkmystel said:
yes i get into recovery and then what i must do?
Click to expand...
Click to collapse
I think a little more studying should have been done before flashing things. Now that we know you can get into CWM Recovery, you can flash a custom ROM. Note that doing so will involve wiping your data/cache/system - so whatever apps you were using on your phone will be gone (along with the data for each app, like your preferences etc.)
And since your bootloader is unlocked, you can flash pretty much any ROM you like because the unlocked bootloader allows custom kernels to be flashed.
As an example, you can flash SlimKat. It is a custom ROM with a custom kernel. The page is here: http://forum.xda-developers.com/showthread.php?t=2700456. You can find the download links in post #3. There will be a ZIP file for the ROM, and then optionally, another ZIP for the Google Apps (aka GAPPS), which would allow you to sign in to your Google account, use Play Store, etc. SlimKat offers 3 gapps (which I will link here because the GAPPS link on that thread seems to take me to a login page): They have mini, normal, and full. Take your pick..
http://www.slimroms.net/index.php/downloads/dlsearch/viewcategory/1150-addons4-4
Once you've downloaded them, copy the Slimkat ZIP to your external SD card. Also copy the GAPPS zip that you chose (if you wanted that).
Put the external card back into the phone and power it up, and get back into recovery like you did earlier. In recovery, before flashing the zips, you should do your wipes (this is where it wipes your apps/data/system). But as a precaution, maybe go into "install zip from sdcard", navigate through your external card to make sure the ZIP files are available to you.
I think that most ROM install zips take care of these wipes for you, but it's a good habit to get into when flashing custom ROMs.
You're going to:
1) Wipe data/factory reset (this will wipe the data and cache)
2) Go into Advanced and wipe Dalvik cache
3) Go into Mounts and Storage and format /system
Once that's done, you're going to go to "install zip from sdcard", choose your external card, and choose the SlimKat ZIP. That will flash the ROM and kernel. Once that's done, you're going to do one more flash - which is the GAPPS zip (if you decided that you wanted it).
Once that flash is done, you should be able to just reboot and the phone will start to boot into the new ROM. Note that on first boot, it will take some time - so you may be staring at the boot animation for a few minutes.
Click to expand...
Click to collapse
root?
LaZiODROID said:
thanos kary said:
I think a little more studying should have been done before flashing things. Now that we know you can get into CWM Recovery, you can flash a custom ROM. Note that doing so will involve wiping your data/cache/system - so whatever apps you were using on your phone will be gone (along with the data for each app, like your preferences etc.)
And since your bootloader is unlocked, you can flash pretty much any ROM you like because the unlocked bootloader allows custom kernels to be flashed.
As an example, you can flash SlimKat. It is a custom ROM with a custom kernel. The page is here: http://forum.xda-developers.com/showthread.php?t=2700456. You can find the download links in post #3. There will be a ZIP file for the ROM, and then optionally, another ZIP for the Google Apps (aka GAPPS), which would allow you to sign in to your Google account, use Play Store, etc. SlimKat offers 3 gapps (which I will link here because the GAPPS link on that thread seems to take me to a login page): They have mini, normal, and full. Take your pick..
http://www.slimroms.net/index.php/downloads/dlsearch/viewcategory/1150-addons4-4
Once you've downloaded them, copy the Slimkat ZIP to your external SD card. Also copy the GAPPS zip that you chose (if you wanted that).
Put the external card back into the phone and power it up, and get back into recovery like you did earlier. In recovery, before flashing the zips, you should do your wipes (this is where it wipes your apps/data/system). But as a precaution, maybe go into "install zip from sdcard", navigate through your external card to make sure the ZIP files are available to you.
I think that most ROM install zips take care of these wipes for you, but it's a good habit to get into when flashing custom ROMs.
You're going to:
1) Wipe data/factory reset (this will wipe the data and cache)
2) Go into Advanced and wipe Dalvik cache
3) Go into Mounts and Storage and format /system
Once that's done, you're going to go to "install zip from sdcard", choose your external card, and choose the SlimKat ZIP. That will flash the ROM and kernel. Once that's done, you're going to do one more flash - which is the GAPPS zip (if you decided that you wanted it).
Once that flash is done, you should be able to just reboot and the phone will start to boot into the new ROM. Note that on first boot, it will take some time - so you may be staring at the boot animation for a few minutes.
Click to expand...
Click to collapse
man i haven t done root yet.....i have 4.4.4 android can you give instructios? and slimkat it is not support my z1 compact
Click to expand...
Click to collapse
thanos kary said:
man i haven t done root yet.....i have 4.4.4 android can you give instructios? and slimkat it is not support my z1 compact
Click to expand...
Click to collapse
When you say you want to root, it means that you want to root the current system that you are on. But from what you have described in this thread, you are currently having a problem with your phone, where it does not boot normally into the system/ROM. You boot straight into Clockworkmod Recovery, every time. Correct? If this is correct, then rooting your current ROM probably won't help your situation (because you are not able to boot normally into the system).
Slimkat is a ROM that has root access included. I believe that pretty much any custom rom has root included. I'm not sure what you mean when you say that slimkat does not support your Z1 compact. You should be able to flash Slimkat to your Z1 Compact. The link from my previous post points to the Slimkat thread, which is in the Z1 Compact Original Android Development forum, so it is made for Z1 Compact.
That said, you don't need to choose Slimkat - I provided that just as an example of a custom rom that has a custom kernel included. Look through the Xperia Z1 Compact Original Android Development forum for custom roms that use custom kernels. Most of those roms have the custom kernel included in their ZIP. Whichever custom rom you choose, make sure to READ the original post (and other posts if necessary) to get the information you need on how to install it, or to find out what files you will need for that ROM (as some roms have add-ons and stuff you may find interesting).
There are also ROMs that are stock-based. Those can be found in the Xperia Z1 Compact Android Development forum. These roms also have root included, and are built to run on the standard stock Sony kernel. Some of them may be based on a specific stock Sony kernel version, so pay attention to that.
If you want to start over, and flash a pure stock Sony ROM to your phone (also known as an FTF), you can do that at any time by downloading an appropriate FTF for your phone, and flashing it by loading the FTF with FlashTool. It will then ask you to put your phone into FlashMode (which is done by making sure the phone is OFF, then holding the VolDown button, and connecting the USB cable while still holding the VolDown button. Once the flash begins, you can let go of the VolDown button) But !! Please note that if you haven't used FlashTool before, you will need to install some drivers. They are included with FlashTool, in a folder called Drivers. You would choose the driver specific to your phone, plus the FlashMode driver, plus the Fastboot driver. If you are using Windows8, you will have to do some extra work to get those drivers to install correctly. It involves booting Win8 into a mode where Driver Signature Enforcement is disabled, then installing the drivers found in the drivers folder of FlashTool. You can easily find out how to do that by searching online.
Hope this helps... don't make any risky flashing moves if you aren't certain about them - just keep reading and searching and you will eventually find the answers you need.
zoom out
LaZiODROID said:
When you say you want to root, it means that you want to root the current system that you are on. But from what you have described in this thread, you are currently having a problem with your phone, where it does not boot normally into the system/ROM. You boot straight into Clockworkmod Recovery, every time. Correct? If this is correct, then rooting your current ROM probably won't help your situation (because you are not able to boot normally into the system).
Slimkat is a ROM that has root access included. I believe that pretty much any custom rom has root included. I'm not sure what you mean when you say that slimkat does not support your Z1 compact. You should be able to flash Slimkat to your Z1 Compact. The link from my previous post points to the Slimkat thread, which is in the Z1 Compact Original Android Development forum, so it is made for Z1 Compact.
That said, you don't need to choose Slimkat - I provided that just as an example of a custom rom that has a custom kernel included. Look through the Xperia Z1 Compact Original Android Development forum for custom roms that use custom kernels. Most of those roms have the custom kernel included in their ZIP. Whichever custom rom you choose, make sure to READ the original post (and other posts if necessary) to get the information you need on how to install it, or to find out what files you will need for that ROM (as some roms have add-ons and stuff you may find interesting).
There are also ROMs that are stock-based. Those can be found in the Xperia Z1 Compact Android Development forum. These roms also have root included, and are built to run on the standard stock Sony kernel. Some of them may be based on a specific stock Sony kernel version, so pay attention to that.
If you want to start over, and flash a pure stock Sony ROM to your phone (also known as an FTF), you can do that at any time by downloading an appropriate FTF for your phone, and flashing it by loading the FTF with FlashTool. It will then ask you to put your phone into FlashMode (which is done by making sure the phone is OFF, then holding the VolDown button, and connecting the USB cable while still holding the VolDown button. Once the flash begins, you can let go of the VolDown button) But !! Please note that if you haven't used FlashTool before, you will need to install some drivers. They are included with FlashTool, in a folder called Drivers. You would choose the driver specific to your phone, plus the FlashMode driver, plus the Fastboot driver. If you are using Windows8, you will have to do some extra work to get those drivers to install correctly. It involves booting Win8 into a mode where Driver Signature Enforcement is disabled, then installing the drivers found in the drivers folder of FlashTool. You can easily find out how to do that by searching online.
Hope this helps... don't make any risky flashing moves if you aren't certain about them - just keep reading and searching and you will eventually find the answers you need.
Click to expand...
Click to collapse
ooooohhh man i love you ,....it works with slimkat....thank you ...thank you...but i don t like this rom ..tell me if you know......how to get back to the officil from sony?
and if you can give a guide to root 4.4 android z1c
thanos kary said:
ooooohhh man i love you ,....it works with slimkat....thank you ...thank you...but i don t like this rom ..tell me if you know......how to get back to the officil from sony?
and if you can give a guide to root 4.4 android z1c
Click to expand...
Click to collapse
You could try to flash Kitslim (http://forum.xda-developers.com/showthread.php?t=2743177)
It is a slightly optimized rom based on the original Sony stock rom.
I use it and ist awesome. You have the stock feeling with this.
.....
Schlengge said:
You could try to flash Kitslim (http://forum.xda-developers.com/showthread.php?t=2743177)
It is a slightly optimized rom based on the original Sony stock rom.
I use it and ist awesome. You have the stock feeling with this.
Click to expand...
Click to collapse
i will flash this rom...but first i want to go in official rom and then i will root the rom
how to root?
thanos kary said:
i will flash this rom...but first i want to go in official rom and then i will root the rom
Click to expand...
Click to collapse
can anyone tell me how to root....i can not root with easy towel root