Related
help guys, i did everything the procedure of bypassing the activation like: tap 4 corner, safe mode, cdma workshop, cancel the *228 upon calling on them and non of them work on me.
i'm here in philippines and verizon network provider is not here.
my phone is htc incredible, android 2.3.3 and just a stock rom no mod just a fresh stock rom.
thank you
Sent from my MT11i using Tapatalk
gaiger said:
help guys, i did everything the procedure of bypassing the activation like: tap 4 corner, safe mode, cdma workshop, cancel the *228 upon calling on them and non of them work on me.
i'm here in philippines and verizon network provider is not here.
my phone is htc incredible, android 2.3.3 and just a stock rom no mod just a fresh stock rom.
thank you
Sent from my MT11i using Tapatalk
Click to expand...
Click to collapse
If none of the other options work about your only other choice would be to try and root it and get s-off, then you could remove the activation from a rom zip and then flash it.
cmlusco said:
If none of the other options work about your only other choice would be to try and root it and get s-off, then you could remove the activation from a rom zip and then flash it.
Click to expand...
Click to collapse
can you give some information how to do that and what is s-off?
how can i remove the activation from rom zip and flash it?
and last how risky is this procedure?
thanks for responding my question
Sent from my MT11i using Tapatalk
did u cancel the *228 activation several times in a row? canceling once only will not work. you must cancel it like 3 or 4 times in a row.
i did it in several times not only 3 to 4 times i did it as many as i can but still doesn't bypass the activation.
many user out their have a same problem as mine and *228 cancel the call works for them, but in my case it doesn't :'(
Sent from my MT11i using Tapatalk
gaiger said:
can you give some information how to do that and what is s-off?
how can i remove the activation from rom zip and flash it?
and last how risky is this procedure?
thanks for responding my question
Sent from my MT11i using Tapatalk
Click to expand...
Click to collapse
If your on a gingerbread rom ie 2.3.* then this is the only known method to root and get s-off. http://forum.xda-developers.com/showthread.php?t=1306400 S-off turns off the bootloaders security and allows editing of system files and flashing things thru hboot like radios and different versions of hboot.
Dissabling the activation is fairly easy. It just requires a build.prop edit, either in a rom zip before flashing or on the rom you are currently on. This requires you to be rooted and s-off though. If you can get your self rooted come back here and i will tell you exactly how.
There is always some danger when modifying your phone from its factory intended state, however thousands do it every day without issues. Just go slow and read carefully, if you follow instructions you should have no issues.
cmlusco said:
If your on a gingerbread rom ie 2.3.* then this is the only known method to root and get s-off. http://forum.xda-developers.com/showthread.php?t=1306400 S-off turns off the bootloaders security and allows editing of system files and flashing things thru hboot like radios and different versions of hboot.
Dissabling the activation is fairly easy. It just requires a build.prop edit, either in a rom zip before flashing or on the rom you are currently on. This requires you to be rooted and s-off though. If you can get your self rooted come back here and i will tell you exactly how.
There is always some danger when modifying your phone from its factory intended state, however thousands do it every day without issues. Just go slow and read carefully, if you follow instructions you should have no issues.
Click to expand...
Click to collapse
Ok ill be back as soon as i've done on rooting and s-off my htc device
gaiger said:
help guys, i did everything the procedure of bypassing the activation like: tap 4 corner, safe mode, cdma workshop, cancel the *228 upon calling on them and non of them work on me.
i'm here in philippines and verizon network provider is not here.
my phone is htc incredible, android 2.3.3 and just a stock rom no mod just a fresh stock rom.
thank you
Sent from my MT11i using Tapatalk
Click to expand...
Click to collapse
Try these instructions carefully:
1. On the Welcome screen with the touch the android to begin icon, do the following:
2. Tap the top left corner of the screen then
3. Tap the top right corner of the screen then
4. Tap the bottom right corner of the screen ( just above the grey bar along the bottom with emergency dial and change language in it) then
5. Tap the bottom left corner of the screen ( just above the grey bar along the bottom with emergency dial and change language in it).
6. That’s it, should pop up the home screen shortly, if not retry. Remember not to drag your finger, simple tap top left, top right, bottom right, bottom left.
OR This:
When you see the screen that tells you to call to activate just hit call to activate end call, back activate again, end call and repeat 4 times and then it will bypass activation.
Let us know how it goes. Cheers...
ok i'm stuck
I follow what cmlusco say http://forum.xda-developers.com/showthread.php?t=1306400
and now i'm stuck on turning my usb debugging because i'm still stuck on activation screen.
is their other way to turn on the usb debugging?
gaiger said:
ok i'm stuck
I follow what cmlusco say http://forum.xda-developers.com/showthread.php?t=1306400
and now i'm stuck on turning my usb debugging because i'm still stuck on activation screen.
is their other way to turn on the usb debugging?
Click to expand...
Click to collapse
Crap i didnt even think about that. I dont think there is a way to turn it on without booting to the os.
I'm Doom!!!
Huhuhuh... if their is no way to enable the usb debugging i guest this is the end.
And yes i already enable the usb debugging in another way
here how it done. http://forum.xda-developers.com/showthread.php?t=1486529
1)when the phone calls to *228 tap contacts icon,right to the "end call"
2)try to add a new contact and enter facebook or other socialnet dialog.
phone asks you to enable wifi, do this and connect your wifi network
3)next hold the search button and (via voice search) search in google "market"
4)tap to the official market page, phone asks you about opening this page,choose market app.login in the google accounts,if you need.
5)search in market "usb debug" app. install it and tap "open' in the market app
6)enable usb debugging and enjoy)
thanks to ramazancik94
this is just accidentally
another way if you didn't downgrade to 2.2
1. call *228 and tap the contact on the right side of end call.
2. add contact and put any information.
3. try to connect it in facebook to prompt the setting window.
4. tap setting.
5. tap search softkey and type application.
6. finally you can enable usb debugging without any problem.
now what should i do cmlusco told me to change the build.prop before flashing so it will bypass the actication screen. but i don't know how to do it, please help me.
ohhh... by the way i already root, s-off and install cwm .
Thanks
gaiger said:
And yes i already enable the usb debugging in another way
here how it done. http://forum.xda-developers.com/showthread.php?t=1486529
1)when the phone calls to *228 tap contacts icon,right to the "end call"
2)try to add a new contact and enter facebook or other socialnet dialog.
phone asks you to enable wifi, do this and connect your wifi network
3)next hold the search button and (via voice search) search in google "market"
4)tap to the official market page, phone asks you about opening this page,choose market app.login in the google accounts,if you need.
5)search in market "usb debug" app. install it and tap "open' in the market app
6)enable usb debugging and enjoy)
thanks to ramazancik94
this is just accidentally
another way if you didn't downgrade to 2.2
1. call *228 and tap the contact on the right side of end call.
2. add contact and put any information.
3. try to connect it in facebook to prompt the setting window.
4. tap setting.
5. tap search softkey and type application.
6. finally you can enable usb debugging without any problem.
now what should i do cmlusco told me to change the build.prop before flashing so it will bypass the actication screen. but i don't know how to do it, please help me.
ohhh... by the way i already root, s-off and install cwm .
Thanks
Click to expand...
Click to collapse
Ok your probably going to hate me but the build.prop edit dosent work as i thought it did. I decided to try it my self before i took the time to write it out, and it does bypass setting up the phone (ie. google setup, location service setup), but not the ota programing as i had thought it did. Sorry
However now that your rooted have you tried flashing another rom and then see if you can use one of the tricks like 4 corners, access epst (##778), or call and hang up? The 4 corners trick, call and hang up, and selecting emergency call and typing ##778# choose edit mode and enter 000000, works on my rom, and on several other roms. Note it may not be ##778 on your rom, it could be ##data#, *#*#program#*#*, *#*#data#*#*, ##prog#, ##program#. I saw this which i have never seen before, turn the phone off then back on to get to the language select screen, press volume up, volume down, back, and search one at a time in quick succession
The only other way i know (and tested) to bypass it would be to rename /system/app/Phone.apk to Phone.apk.bak and then reboot. This will bypass ota programing. However by renaming the Phone.apk you can no lonher access EPST which you would need to enter your local carriers info.
You could also look in to QPST, a windows program that can be used to program a phone.
cmlusco said:
Ok your probably going to hate me but the build.prop edit dosent work as i thought it did. I decided to try it my self before i took the time to write it out, and it does bypass setting up the phone (ie. google setup, location service setup), but not the ota programing as i had thought it did. Sorry
However now that your rooted have you tried flashing another rom and then see if you can use one of the tricks like 4 corners, access epst (##778), or call and hang up? The 4 corners trick, call and hang up, and selecting emergency call and typing ##778# choose edit mode and enter 000000, works on my rom, and on several other roms. Note it may not be ##778 on your rom, it could be ##data#, *#*#program#*#*, *#*#data#*#*, ##prog#, ##program#. I saw this which i have never seen before, turn the phone off then back on to get to the language select screen, press volume up, volume down, back, and search one at a time in quick succession
The only other way i know (and tested) to bypass it would be to rename /system/app/Phone.apk to Phone.apk.bak and then reboot. This will bypass ota programing. However by renaming the Phone.apk you can no lonher access EPST which you would need to enter your local carriers info.
You could also look in to QPST, a windows program that can be used to program a phone.
Click to expand...
Click to collapse
Its ok sir cmlusco, you're really a great help for me. i just want to know what am i going to edit in EPST after i access it, and is QPST is cdma workshop.
Sent from my MT11i using Tapatalk
gaiger said:
Its ok sir cmlusco, you're really a great help for me. i just want to know what am i going to edit in EPST after i access it, and is QPST is cdma workshop.
Sent from my MT11i using Tapatalk
Click to expand...
Click to collapse
Are you trying to activate it on a local network? If so you need to enter that carriers info in epst, you need to get that info from them.
If your just trying to use it as a mp3 player etc with no service, just change everything in nam settings to zeros. If it says 0004564 change it to 0000000.
Qpst and cdma workshop are similar type programs, but not the same program. Im not very familiar with cdma workshop and if it would work or not.
cmlusco said:
Are you trying to activate it on a local network? If so you need to enter that carriers info in epst, you need to get that info from them.
If your just trying to use it as a mp3 player etc with no service, just change everything in nam settings to zeros. If it says 0004564 change it to 0000000.
Qpst and cdma workshop are similar type programs, but not the same program. Im not very familiar with cdma workshop and if it would work or not.
Click to expand...
Click to collapse
thank you sir im going to use my phone as mp3, picture taking, video recording and gaming. Because i can't use verizon carrier, there's no verizon carrier here in philippines. Thanks a lot sir cmlusco you are really a great help for me
gaiger said:
thank you sir im going to use my phone as mp3, picture taking, video recording and gaming. Because i can't use verizon carrier, there's no verizon carrier here in philippines. Thanks a lot sir cmlusco you are really a great help for me
Click to expand...
Click to collapse
Here is some info on what exactly to change. http://forum.xda-developers.com/showthread.php?t=1475303
First things first. I unlocked my R800x' bootloader today!! :highfive:
Now comes the tricky part!
I'm using R800x in India with a different carrier. I have got 2 questions
1) Now, in case of factory reset, i can get to work my carrier settings by dumping the PRL and NVdump by using CDMA workshop tool. But, when my friend who also have a similar R800x with same carrier, can't do it after settings reset(factory reset no worries). What do in this case?
2)If I flash a new rom and/or a kernel will my call and data settings go away?
Thanks in advance for any help!
actually u can try re-activate the service by dialing *228 1st,
it work in my country,
but it still depends on your carrier..
btw, for the stuff about QPST which u ask in DM, u need to make sure u know all the informatiuon u need about your carrier config to make it work.
run4jit said:
First things first. I unlocked my R800x' bootloader today!! :highfive:
Now comes the tricky part!
I'm using R800x in India with a different carrier. I have got 2 questions
1) Now, in case of factory reset, i can get to work my carrier settings by dumping the PRL and NVdump by using CDMA workshop tool. But, when my friend who also have a similar R800x with same carrier, can't do it after settings reset(factory reset no worries). What do in this case?
2)If I flash a new rom and/or a kernel will my call and data settings go away?
Thanks in advance for any help!
Click to expand...
Click to collapse
I cant say with any certainty about your call settings, carrier settings ,etc as I am on VZ. But I would think just flashing a new kernel would be fine, I dont think that would wipe any carrier settings (if I am wrong can someone correct me)
I use Doomkernel V2 - http://forum.xda-developers.com/showthread.php?t=1368636
Make sure to also download the wifi modules and save those on a place in your sdcard.
To flash the DoomKernel type the following command once you are in fastboot mode (blue light on power button, via pressing the search button while powered off)
fastboot flash boot "whatever name doomkernel is title, I titled mine DKv2-CDMA.zip
So again for reference with mine:
fastboot flash boot DKv2-CDMA.zip (then press enter, and it should start to flash, only takes a couple seconds at most)
Then power on device and when yo usee the blue light on your power button with the DoomKernel screen press the back button and you will be in the recovery, using the on screen arrows I use Recovery version 4. Then scroll down to "Backup/Restore" and select backup using the on screen button on the bottom right, then make a nandroid backup. Once its done making a backup. Press the back button on the screen, bottom left, until you are back on the main menu. Then scroll down to "Install zip from Sdcard". And then scroll through to the DoomKernel wifi modules, and once you see it highlight it and select it to install. This will install the correct modules for DoomKernel so your wifi will work. After all is said and done parhaps you should make a nandroid after you flash wifi modules not before. Anyways once all is done reboot your phone and you will be golden. I use no frills from the market to OC my phone to 1.2ghz on Performance & BFQ. But thats personal preference.
Anyways good luck and if you have more issues and or questions post here.,
Thanks ozzmanj1(earlier name was cool ) for your valuable inputs. Also, will this work with 2.3.2 as my phone is running on that? Also, after overclocking do i need to change voltage levels, as you mentioned in private chat that at 1.4 GHz you mobile back was getting hot. Maybe, it has something do with the processor demanding more current from the battery(I'm not sure). Whats BFQ? Anyways, thanks!!
run4jit said:
Thanks ozzmanj1(earlier name was cool ) for your valuable inputs. Also, will this work with 2.3.2 as my phone is running on that? Also, after overclocking do i need to change voltage levels, as you mentioned in private chat that at 1.4 GHz you mobile back was getting hot. Maybe, it has something do with the processor demanding more current from the battery(I'm not sure). Whats BFQ? Anyways, thanks!!
Click to expand...
Click to collapse
If you use No Frills CPU you dont have to mess with the voltages, there are advantages to using other CPU overclock apps where you can take over what the voltages are but I have never messed with them, and simply use No Frills as its quick and easy. BFQ tells the phone how to perform, such as running at a constatn speed for quick high perfoirmance or use a different I/O scheduler to keep better battery life.
For definitions of what each Governor does and what each I/O does read this thread:
http://forum.xda-developers.com/showthread.php?t=1369817
otonieru said:
actually u can try re-activate the service by dialing *228 1st,
it work in my country,
but it still depends on your carrier..
btw, for the stuff about QPST which u ask in DM, u need to make sure u know all the informatiuon u need about your carrier config to make it work.
Click to expand...
Click to collapse
Can you elaborate a bit more on this? Thanks!
ozzmanj1, Since my R800x is running on 2.3.2, can you please guide me step-by-step as to how I would start about flashing doom kernel v2 as well as that timescape from UK firmware thread?
Sorry for asking a lot. But, i really don't know where to start!
I would really be happy if i get timescape+mediascape plus overclocking running on my phone. Just dunno where to begin
Anyways, thanks in advance
Flashing new kernel sometimes causing bootloop if u didn't do wipes to system n userdata
Also some kernel bring in different baseband, and changing baseband cause ur phone to lost it network setting, thus u need to re-activating it later..
Sent from my R800x using xda app-developers app
---------- Post added at 11:47 AM ---------- Previous post was at 11:45 AM ----------
To flash new kernel u can use fastboot or flashtool
Find a thread that give u download link for both tools, those thread will show u how to use it as well
Sent from my R800x using xda app-developers app
Well I've flashed 2.3.3 firmware with timescape and doomkernel and supercharged as well. And I'm loving it. :thumbup:
Hey everyone I've been searching the whole entire internet and xda to find out what I need to do exactly to get back LTE. I lost my IMEI after upgrading Cyanogenmod NIghtly without backup of efs folder. I was able to get the IMEI injected manually with NV writer/reader so I can connect to edge but only edge network 2g mode. What do I need or install or do to get back lte. The thread that people point to others that ive searched is deleted thanks
Try a touchwiz stock Rom, then:
Dial: *#197328640#, then select the numbers from the menu in the order: 11865.
Then from the dial pad:
Dial *#2263#
Select WCDMA
Select Wcdma all
Back (or go back to the dial pad again and dial *#2263#)
Select LTE
Select LTE all
Back (or go back to the dial pad again and dial *#2263#)
Select Automatic
Back key on the phone
Reboot
See what happens.
anything evewsfu
shortydoggg said:
Try a touchwiz stock Rom, then:
Dial: *#197328640#, then select the numbers from the menu in the order: 11865.
Then from the dial pad:
Dial *#2263#
Select WCDMA
Select Wcdma all
Back (or go back to the dial pad again and dial *#2263#)
Select LTE
Select LTE all
Back (or go back to the dial pad again and dial *#2263#)
Select Automatic
Back key on the phone
Reboot
See what happens.
Click to expand...
Click to collapse
thanks alot man
I had the same issue, this method didn't work for me.
So far I haven't seen a for sure fix . I tried everything uprooting back to stock , every method , even put the s3 in the factory box for 4months lmao . For real I have been beside my self not a noob my imei went , then reinjected. Still lost , there is post somewhere that a guy does fix them but have to ship it off .. hopefully there got to be a way dude . Good luck
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
ebubbastew said:
So far I haven't seen a for sure fix . I tried everything uprooting back to stock , every method , even put the s3 in the factory box for 4months lmao . For real I have been beside my self not a noob my imei went , then reinjected. Still lost , there is post somewhere that a guy does fix them but have to ship it off .. hopefully there got to be a way dude . Good luck
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I'm in the same boat. I managed to inject the IMEI, but can't get to 4G. After I reboot, I start out on LTE and get knocked back to EDGE within five minutes. Also, Samsung KIES does not recognize the firmware (even after I restore to a stock system).
I thought playing with the CSC to ensure that it matches the rest of the software might have an impact, but I get an error when I try the CSC changer software.
t.s.eliot said:
I'm in the same boat. I managed to inject the IMEI, but can't get to 4G. After I reboot, I start out on LTE and get knocked back to EDGE within five minutes. Also, Samsung KIES does not recognize the firmware (even after I restore to a stock system).
I thought playing with the CSC to ensure that it matches the rest of the software might have an impact, but I get an error when I try the CSC changer software.
Click to expand...
Click to collapse
I'm having the same problem as you. Were you able to find a solution???
shortydoggg said:
Try a touchwiz stock Rom, then:
Dial: *#197328640#, then select the numbers from the menu in the order: 11865.
Then from the dial pad:
Dial *#2263#
Select WCDMA
Select Wcdma all
Back (or go back to the dial pad again and dial *#2263#)
Select LTE
Select LTE all
Back (or go back to the dial pad again and dial *#2263#)
Select Automatic
Back key on the phone
Reboot
See what happens.
Click to expand...
Click to collapse
damn I was hoping this would fix my issue - but it didn't. Been stuck on edge for 3 days now. At first I lost my imei number, but was able to inject it back into the phone - now I can't get away from edge network. I want my 4G back lol
http://forum.xda-developers.com/showthread.php?t=2374063
Sent from my SAMSUNG-SGH-I747 using xda premium
No one comments on this person's suggestion.
The solution
Guys here is the solution (attached)
inject this items using NV reader/writer
was perfect for me
umar4u said:
Guys here is the solution (attached)
inject this items using NV reader/writer
was perfect for me
Click to expand...
Click to collapse
I failed to inject it to my device.
This worked.
umar4u said:
Guys here is the solution (attached)
inject this items using NV reader/writer
was perfect for me
Click to expand...
Click to collapse
umar4u, I can't thank you enough. I have been paying AT&T for 2 months for a phone that didn't even work as a phone. This fixed it. Download his file and refer to the video in this post to inject his file.
http://forum.xda-developers.com/showthread.php?t=1804117
This just saved my day... Thanks!
Although it says it failed on 3 things, it works!
Life Saver!!!
Everyone, this works!!!
umar4u said:
Guys here is the solution (attached)
inject this items using NV reader/writer
was perfect for me
Click to expand...
Click to collapse
Thank you so much! This is great! It worked! I tried every other possible fix and no avail. Then i came across this and boom! Thanks again! :victory:
you can try entering this menu * # * # 4636 # * # * into the first option on the telephony information and down to where it says set preferred network type and change it to LTE / GSM / CDMA auto (PRL)
umar4u said:
Guys here is the solution (attached)
inject this items using NV reader/writer
was perfect for me
Click to expand...
Click to collapse
Thank you for the solution Umar, but how did you figure out that these are the only NV Items needed? BTW, are you who I think you are?
maxqas said:
Thank you for the solution Umar, but how did you figure out that these are the only NV Items needed? BTW, are you who I think you are?
Click to expand...
Click to collapse
You are welcome. i found this file on internet, someone posted it. Basically it is NV items for 3g or 4g, I think.
And I don't know who you think I am.
Nice to see this worked for people.
---------- Post added at 01:14 AM ---------- Previous post was at 01:05 AM ----------
RayZhang said:
I failed to inject it to my device.
Click to expand...
Click to collapse
Hove you done this:
Connect phone to computer.
In Stock Dialer, enter *#7284#
A PhoneUtil Menu Should open
Press Qualcomm USB Settings button
select RMNET + DM + MODEM and press OK.
Open Device Manager and expand "Ports"
Note the COM Port # listed next to "Samsung Mobile USB Serial Port (COM#)
Ensure both boxes in Top bar are checked.
Click Connect in the Top Bar
Later you can write NV items
dont forget to Go back into the PhoneUtil menu and switch back to MTP + ADB
Thanks!
umar4u said:
Guys here is the solution (attached)
inject this items using NV reader/writer
was perfect for me
Click to expand...
Click to collapse
I registered just to say Thanks!!
I was trying different methods for hours, and this worked perfectly for me.
I searched for weeks for a solution!!! Thank you so much!! *___*
When I navigate to the APN settings, no APNs are visible.
The following message displays:
Access Point Name settings are not available for this user.
Question: What type of user do I need to activate so I can see the APN settings?
(Or is this the wrong question to be asking? Need to see APN settings.)
My hardware, software and network:
Phone: Samsung Galaxy S III (Sprint) - SPH-L710
Software: cm-12.1-20150619-NIGHTLY-d2spr.zip
Network: Ting (Sprint)
themanwest2000 said:
When I navigate to the APN settings, no APNs are visible.
The following message displays:
Access Point Name settings are not available for this user.
Question: What type of user do I need to activate so I can see the APN settings?
(Or is this the wrong question to be asking? Need to see APN settings.)
My hardware, software and network:
Phone: Samsung Galaxy S III (Sprint) - SPH-L710
Software: cm-12.1-20150619-NIGHTLY-d2spr.zip
Network: Ting (Sprint)
Click to expand...
Click to collapse
Did you enable developer options and root?
lvpre said:
Did you enable developer options and root?
Click to expand...
Click to collapse
Yup. I have root access for apps and ADB from the Developer Options menu.
themanwest2000 said:
When I navigate to the APN settings, no APNs are visible.
The following message displays:
Access Point Name settings are not available for this user,
Click to expand...
Click to collapse
I am having this same exact issue! I been looking all over Google and XDA the last week or two without any luck.
Most sources say install APN Backup and Restore app, but it still doesn't work. It gives some other permission error. Then when using /system/mover app to move APN Backup and Restore to system, it fails and gives some other error in turn breaking the app, which then has to be reinstalled to be back in the same situation as before.
Some say install a flashable APN fix, if you are lucky to find one for your carrier. I am using this Sprint S3 flashed to Pageplus, and I can not find a Pageplus or Verizon APN file to flash anywhere. Perhaps you will get lucky and find one Ting? or a custom rom with a Ting variant? I have not seen any of these yet, but not sure if they exist somewhere. If not I think we are screwed? There has to be a way...
I have experienced this on all 5.x and some 4.4.x roms for this device, and I have not found a solution anywhere yet. I highly believe it is related to this: link If anyone is able to shed some light on this issue (or the solution) would be greatly appreciated.
Saafir said:
You don't HAVE to have a flashable zip. You can manually place your APNs. system>etc>apn-config.xml
Click to expand...
Click to collapse
I don't see the system folder or the file you mention (system>etc>apn-config.xml) Saafir.
I have created two APNs needed for Ting, but I need to remove any APNs that may cause any problems. Right now I don't see any APNs, even tho I have created and saved two APNs (which helped bring data to my phone).
So back to my original question, what type of user do I need to activate so I can see the APN settings? Thanks for your time and help.
themanwest2000 said:
I don't see the system folder or the file you mention (system>etc>apn-config.xml) Saafir.
I have created two APNs needed for Ting, but I need to remove any APNs that may cause any problems. Right now I don't see any APNs, even tho I have created and saved two APNs (which helped bring data to my phone).
So back to my original question, what type of user do I need to activate so I can see the APN settings? Thanks for your time and help.
Click to expand...
Click to collapse
The settings are only there if you already have apn installed. That setting doesn't allow you to create apn there, it only allows you to choose between installed APNs. If you have none, then it will say unavailable for this user.
Saafir said:
You don't HAVE to have a flashable zip. You can manually place your APNs. system>etc>apn-config.xml
Click to expand...
Click to collapse
I have them listed in system>etc>apn-config.xml, but it still not viewable in the APN section of settings. MMS definitely isnt working and mobile data isnt always working. Im using the 0714 nightly for on my Sprint GS3 that im using with boost.
MACscr said:
I have them listed in system>etc>apn-config.xml, but it still not viewable in the APN section of settings. MMS definitely isnt working and mobile data isnt always working. Im using the 0714 nightly for on my Sprint GS3 that im using with boost.
Click to expand...
Click to collapse
You have to flash the boost apn fix.
madbat99 said:
You have to flash the boost apn fix.
Click to expand...
Click to collapse
I thought someone said it wasn't required. I have flashed the universal boost fix r2 that I used with the nightly from about 2 months ago. Doesn't make a. Difference. Even re flashed it. I'm assuming that's e only way that setting xml got there in the first place. Is there another fix that I'm unaware of?
MACscr said:
I thought someone said it wasn't required. I have flashed the universal boost fix r2 that I used with the nightly from about 2 months ago. Doesn't make a. Difference. Even re flashed it. I'm assuming that's e only way that setting xml got there in the first place. Is there another fix that I'm unaware of?
Click to expand...
Click to collapse
Full wipe, flash rom, gapps and boost apn fix. Boot up fully once, then back to recovery and flash rom and gapps again (no wipe, no apn fix this time).
madbat99 said:
Full wipe, flash rom, gapps and boost apn fix. Boot up fully once, then back to recovery and flash rom and gapps again (no wipe, no apn fix this time).
Click to expand...
Click to collapse
Just reflashed the rom and gapps, no diff.
I have h815 model with damaged wifi chip -there's no wifi, hpotspot and bluetooth on MM. I tried to install 10e firmware. Everything is ok till phone is starting and i have to choose language and type of transmittion. I can choose cellphone data transfer but I can't press 'next' button - it's not active. What should I done?
100h_SOT said:
I have h815 model with damaged wifi chip -there's no wifi, hpotspot and bluetooth on MM. I tried to install 10e firmware. Everything is ok till phone is starting and i have to choose language and type of transmittion. I can choose cellphone data transfer but I can't press 'next' button - it's not active. What should I done?
Click to expand...
Click to collapse
google stuck on configuring phone lgg3 follow that method.
its like shut off wifi start over hold vol up or down while tapping the greyed out home key or something like that i cant rmeber
its something stupid like that
Simply put a valad SIM card in it and tick the box for cellular phone and then put in Google account details and it will ask if you want to restore from a back up or not then it will ask if you want to put in a pin number all of this you can change later if needed.
stinka318 said:
Simply put a valad SIM card in it and tick the box for cellular phone and then put in Google account details and it will ask if you want to restore from a back up or not then it will ask if you want to put in a pin number all of this you can change later if needed.
Click to expand...
Click to collapse
Lol. I didnt even think of that. that works most of the time unless ures a gsm unlocked cdma device. Sometimes apn settings not correct and no data. cant edit them till device is configured.
TheMadScientist420 said:
Lol. I didnt even think of that. that works most of the time unless ures a gsm unlocked cdma device. Sometimes apn settings not correct and no data. cant edit them till device is configured.
Click to expand...
Click to collapse
Well the g4 h815 I have uses LTE network so it is no problem for me the only thing I can think of is if it supported 3g or something like that then you may be able to get wcdma or something........
TheMadScientist420 said:
google stuck on configuring phone lgg3 follow that method.
its like shut off wifi start over hold vol up or down while tapping the greyed out home key or something like that i cant rmeber
its something stupid like that
Click to expand...
Click to collapse
Could you find this solution? It may work...
100h_SOT said:
Could you find this solution? It may work...
Click to expand...
Click to collapse
https://forum.xda-developers.com/sprint-lg-g3/help/sprint-lg-g3-ls990-stuck-configuring-t2883294
TheMadScientist420 said:
https://forum.xda-developers.com/sprint-lg-g3/help/sprint-lg-g3-ls990-stuck-configuring-t2883294
Click to expand...
Click to collapse
Almost OK.
I've got note that I can skip network configuration but after pressing SKIP ANYWAY... I have to choose type of network. I'm still at the same moment.