Related
hello,
I have installed XDandroid on my htc touch pro2. But i can't connect to my network (provider). I search for many days now, but i can't find any solution.
i have the manila version on my htc.
Thnx in advance.
dubbelr said:
hello,
I have installed XDandroid on my htc touch pro2. But i can't connect to my network (provider). I search for many days now, but i can't find any solution.
i have the manila version on my htc.
Thnx in advance.
Click to expand...
Click to collapse
#1 reason is probably the force CDMA command in the startup.txt. If you're CDMA, you need it to =1, if you're GSM you need it to =0. Check that & get back to us.
thnx for helping
that was the problem
i am having ths same issue with sprint. Ive tried to check and uncheck the force cdma and neither work. Where do i actually look to see it its set to 0?
swaters3 said:
i am having ths same issue with sprint. Ive tried to check and uncheck the force cdma and neither work. Where do i actually look to see it its set to 0?
Click to expand...
Click to collapse
startup.txt. Perhaps you need to read the FAQ my friend.
swaters3 said:
i am having ths same issue with sprint. Ive tried to check and uncheck the force cdma and neither work. Where do i actually look to see it its set to 0?
Click to expand...
Click to collapse
You are on Sprint, so Force CDMA=1. Also probably the number one reason you have no service is the SIM card is still in. Remove the SIM and re-try Android.
arrrghhh said:
startup.txt. Perhaps you need to read the FAQ my friend.
Click to expand...
Click to collapse
I read throught the faq and tried everything but it still doesnt connect. Im gonna download it again and try again.
thanks
demonlordoftheround said:
You are on Sprint, so Force CDMA=1. Also probably the number one reason you have no service is the SIM card is still in. Remove the SIM and re-try Android.
Click to expand...
Click to collapse
I have tried removing the sim card in the past and i tried again. now what happens is that with force cdma checked it keeps trying to connect and then disconnects 20 seconds later over and over. I try to access the wireless networks settings but because it keeps disconnecting it goes back so it doesnt have achance to search for wireless networks.
If i dont force cdma then nothing happens and when i search for wireless networks it just keeps and searching but nothing happens. any help would be appreciated.
So wifi has nothing to do with CDMA/GSM... Typically wifi gets hosed from people who update their zImage but not their modules - they go hand-in-hand and while you can run without the modules, stuff like wifi won't work at all.
arrrghhh said:
So wifi has nothing to do with CDMA/GSM... Typically wifi gets hosed from people who update their zImage but not their modules - they go hand-in-hand and while you can run without the modules, stuff like wifi won't work at all.
Click to expand...
Click to collapse
sorry i wasnt clear. i read through the faq and one suggestion is to go to settings and search for wireless networks meaning sprint atat etc. i actually do connect via wifi but i want to connect via sprint so i can use android as my operating system and play with it. any help would be appreciated.
swaters3 said:
sorry i wasnt clear. i read through the faq and one suggestion is to go to settings and search for wireless networks meaning sprint atat etc. i actually do connect via wifi but i want to connect via sprint so i can use android as my operating system and play with it. any help would be appreciated.
Click to expand...
Click to collapse
Ok you're still not being clear.
I assume your issue is you can't connect to the internet via the cell radio? Thru Sprint's network instead of wifi?
Can you make/receive calls? If so, data *should* just connect, assuming you're using relatively new stuff. A while ago you had to create an APN manually to connect, but that shouldn't be the case any more...
arrrghhh said:
Ok you're still not being clear.
I assume your issue is you can't connect to the internet via the cell radio? Thru Sprint's network instead of wifi?
Can you make/receive calls? If so, data *should* just connect, assuming you're using relatively new stuff. A while ago you had to create an APN manually to connect, but that shouldn't be the case any more...
Click to expand...
Click to collapse
i cant make phone calls. i can connect to wifi. any help would be app. thanks.
swaters3 said:
i cant make phone calls. i can connect to wifi. any help would be app. thanks.
Click to expand...
Click to collapse
Force cdma needs to =1 in your startup.txt CMDLINE section.
arrrghhh said:
Force cdma needs to =1 in your startup.txt CMDLINE section.
Click to expand...
Click to collapse
How do i access the force cdma. I use some sort of booting app that allows me to check or uncheck force cdma and to choose overclock speeds and update to newer versions. I dont see any place where i can access any stratup.txtThanks for your help. I would really love to try out android. Sprint wont let me update to any other smart phone but the tp2 (not that that is a bad thing) unless i upgrade my plan. I pay 5$ for unlimited data
swaters3 said:
How do i access the force cdma. I use some sort of booting app that allows me to check or uncheck force cdma and to choose overclock speeds and update to newer versions. I dont see any place where i can access any stratup.txtThanks for your help. I would really love to try out android. Sprint wont let me update to any other smart phone but the tp2 (not that that is a bad thing) unless i upgrade my plan. I pay 5$ for unlimited data
Click to expand...
Click to collapse
You don't want to know what I pay...
So I'm not sure how to explain this. Your startup.txt is a file you edit - where you run haret.exe from?
It sounds like you installed the cab, which unfortunately means you probably know nothing about how the system is put together, even at a high-level. Which is a shame...
With that said, assuming you're running v1.3 of the startup app, it should work fine. I cannot, and will not support that app. If you need support for that app, please go to sov's thread on the application.
If you want help on XDAndroid, then we can help... but we encourage you to search, read, research, search again, read some more, do a little more research, and then you may be ready to post. Maybe.
. .. fg
arrrghhh said:
You don't want to know what I pay...
So I'm not sure how to explain this. Your startup.txt is a file you edit - where you run haret.exe from?
It sounds like you installed the cab, which unfortunately means you probably know nothing about how the system is put together, even at a high-level. Which is a shame...
With that said, assuming you're running v1.3 of the startup app, it should work fine. I cannot, and will not support that app. If you need support for that app, please go to sov's thread on the application.
If you want help on XDAndroid, then we can help... but we encourage you to search, read, research, search again, read some more, do a little more research, and then you may be ready to post. Maybe.
Click to expand...
Click to collapse
can you direct me to where i can learn how to simply install android without the cab file. My research brought me originally to the cab file. I dint realize there was another way to install android.
Thanks for your help
swaters3 said:
. .. fg
can you direct me to where i can learn how to simply install android without the cab file. My research brought me originally to the cab file. I dint realize there was another way to install android.
Thanks for your help
Click to expand...
Click to collapse
There's CAB and RAR download's on Reef's download page...
arrrghhh said:
There's CAB and RAR download's on Reef's download page...
Click to expand...
Click to collapse
thanks for your help. I am in the middle of search and researching it.
Hopefuly ill get it to work.
What radio version do you have on your device?
gamescan said:
What radio version do you have on your device?
Click to expand...
Click to collapse
..
running stock sprint 6.5 update radio version 2.32.00wf. Please help me if you can im ready to give up. I am no expert just know how to download cab files and install them to my phone. Im very good at using the phone but not good at any type of programming. I do enjoy using all the great programs that have made the tp2 great and would love to use android without changing plans and moving from a resistive touc screen which i prefer.
thanks
help guys, i did everything the procedure of bypassing the activation like: tap 4 corner, safe mode, cdma workshop, cancel the *228 upon calling on them and non of them work on me.
i'm here in philippines and verizon network provider is not here.
my phone is htc incredible, android 2.3.3 and just a stock rom no mod just a fresh stock rom.
thank you
Sent from my MT11i using Tapatalk
gaiger said:
help guys, i did everything the procedure of bypassing the activation like: tap 4 corner, safe mode, cdma workshop, cancel the *228 upon calling on them and non of them work on me.
i'm here in philippines and verizon network provider is not here.
my phone is htc incredible, android 2.3.3 and just a stock rom no mod just a fresh stock rom.
thank you
Sent from my MT11i using Tapatalk
Click to expand...
Click to collapse
If none of the other options work about your only other choice would be to try and root it and get s-off, then you could remove the activation from a rom zip and then flash it.
cmlusco said:
If none of the other options work about your only other choice would be to try and root it and get s-off, then you could remove the activation from a rom zip and then flash it.
Click to expand...
Click to collapse
can you give some information how to do that and what is s-off?
how can i remove the activation from rom zip and flash it?
and last how risky is this procedure?
thanks for responding my question
Sent from my MT11i using Tapatalk
did u cancel the *228 activation several times in a row? canceling once only will not work. you must cancel it like 3 or 4 times in a row.
i did it in several times not only 3 to 4 times i did it as many as i can but still doesn't bypass the activation.
many user out their have a same problem as mine and *228 cancel the call works for them, but in my case it doesn't :'(
Sent from my MT11i using Tapatalk
gaiger said:
can you give some information how to do that and what is s-off?
how can i remove the activation from rom zip and flash it?
and last how risky is this procedure?
thanks for responding my question
Sent from my MT11i using Tapatalk
Click to expand...
Click to collapse
If your on a gingerbread rom ie 2.3.* then this is the only known method to root and get s-off. http://forum.xda-developers.com/showthread.php?t=1306400 S-off turns off the bootloaders security and allows editing of system files and flashing things thru hboot like radios and different versions of hboot.
Dissabling the activation is fairly easy. It just requires a build.prop edit, either in a rom zip before flashing or on the rom you are currently on. This requires you to be rooted and s-off though. If you can get your self rooted come back here and i will tell you exactly how.
There is always some danger when modifying your phone from its factory intended state, however thousands do it every day without issues. Just go slow and read carefully, if you follow instructions you should have no issues.
cmlusco said:
If your on a gingerbread rom ie 2.3.* then this is the only known method to root and get s-off. http://forum.xda-developers.com/showthread.php?t=1306400 S-off turns off the bootloaders security and allows editing of system files and flashing things thru hboot like radios and different versions of hboot.
Dissabling the activation is fairly easy. It just requires a build.prop edit, either in a rom zip before flashing or on the rom you are currently on. This requires you to be rooted and s-off though. If you can get your self rooted come back here and i will tell you exactly how.
There is always some danger when modifying your phone from its factory intended state, however thousands do it every day without issues. Just go slow and read carefully, if you follow instructions you should have no issues.
Click to expand...
Click to collapse
Ok ill be back as soon as i've done on rooting and s-off my htc device
gaiger said:
help guys, i did everything the procedure of bypassing the activation like: tap 4 corner, safe mode, cdma workshop, cancel the *228 upon calling on them and non of them work on me.
i'm here in philippines and verizon network provider is not here.
my phone is htc incredible, android 2.3.3 and just a stock rom no mod just a fresh stock rom.
thank you
Sent from my MT11i using Tapatalk
Click to expand...
Click to collapse
Try these instructions carefully:
1. On the Welcome screen with the touch the android to begin icon, do the following:
2. Tap the top left corner of the screen then
3. Tap the top right corner of the screen then
4. Tap the bottom right corner of the screen ( just above the grey bar along the bottom with emergency dial and change language in it) then
5. Tap the bottom left corner of the screen ( just above the grey bar along the bottom with emergency dial and change language in it).
6. That’s it, should pop up the home screen shortly, if not retry. Remember not to drag your finger, simple tap top left, top right, bottom right, bottom left.
OR This:
When you see the screen that tells you to call to activate just hit call to activate end call, back activate again, end call and repeat 4 times and then it will bypass activation.
Let us know how it goes. Cheers...
ok i'm stuck
I follow what cmlusco say http://forum.xda-developers.com/showthread.php?t=1306400
and now i'm stuck on turning my usb debugging because i'm still stuck on activation screen.
is their other way to turn on the usb debugging?
gaiger said:
ok i'm stuck
I follow what cmlusco say http://forum.xda-developers.com/showthread.php?t=1306400
and now i'm stuck on turning my usb debugging because i'm still stuck on activation screen.
is their other way to turn on the usb debugging?
Click to expand...
Click to collapse
Crap i didnt even think about that. I dont think there is a way to turn it on without booting to the os.
I'm Doom!!!
Huhuhuh... if their is no way to enable the usb debugging i guest this is the end.
And yes i already enable the usb debugging in another way
here how it done. http://forum.xda-developers.com/showthread.php?t=1486529
1)when the phone calls to *228 tap contacts icon,right to the "end call"
2)try to add a new contact and enter facebook or other socialnet dialog.
phone asks you to enable wifi, do this and connect your wifi network
3)next hold the search button and (via voice search) search in google "market"
4)tap to the official market page, phone asks you about opening this page,choose market app.login in the google accounts,if you need.
5)search in market "usb debug" app. install it and tap "open' in the market app
6)enable usb debugging and enjoy)
thanks to ramazancik94
this is just accidentally
another way if you didn't downgrade to 2.2
1. call *228 and tap the contact on the right side of end call.
2. add contact and put any information.
3. try to connect it in facebook to prompt the setting window.
4. tap setting.
5. tap search softkey and type application.
6. finally you can enable usb debugging without any problem.
now what should i do cmlusco told me to change the build.prop before flashing so it will bypass the actication screen. but i don't know how to do it, please help me.
ohhh... by the way i already root, s-off and install cwm .
Thanks
gaiger said:
And yes i already enable the usb debugging in another way
here how it done. http://forum.xda-developers.com/showthread.php?t=1486529
1)when the phone calls to *228 tap contacts icon,right to the "end call"
2)try to add a new contact and enter facebook or other socialnet dialog.
phone asks you to enable wifi, do this and connect your wifi network
3)next hold the search button and (via voice search) search in google "market"
4)tap to the official market page, phone asks you about opening this page,choose market app.login in the google accounts,if you need.
5)search in market "usb debug" app. install it and tap "open' in the market app
6)enable usb debugging and enjoy)
thanks to ramazancik94
this is just accidentally
another way if you didn't downgrade to 2.2
1. call *228 and tap the contact on the right side of end call.
2. add contact and put any information.
3. try to connect it in facebook to prompt the setting window.
4. tap setting.
5. tap search softkey and type application.
6. finally you can enable usb debugging without any problem.
now what should i do cmlusco told me to change the build.prop before flashing so it will bypass the actication screen. but i don't know how to do it, please help me.
ohhh... by the way i already root, s-off and install cwm .
Thanks
Click to expand...
Click to collapse
Ok your probably going to hate me but the build.prop edit dosent work as i thought it did. I decided to try it my self before i took the time to write it out, and it does bypass setting up the phone (ie. google setup, location service setup), but not the ota programing as i had thought it did. Sorry
However now that your rooted have you tried flashing another rom and then see if you can use one of the tricks like 4 corners, access epst (##778), or call and hang up? The 4 corners trick, call and hang up, and selecting emergency call and typing ##778# choose edit mode and enter 000000, works on my rom, and on several other roms. Note it may not be ##778 on your rom, it could be ##data#, *#*#program#*#*, *#*#data#*#*, ##prog#, ##program#. I saw this which i have never seen before, turn the phone off then back on to get to the language select screen, press volume up, volume down, back, and search one at a time in quick succession
The only other way i know (and tested) to bypass it would be to rename /system/app/Phone.apk to Phone.apk.bak and then reboot. This will bypass ota programing. However by renaming the Phone.apk you can no lonher access EPST which you would need to enter your local carriers info.
You could also look in to QPST, a windows program that can be used to program a phone.
cmlusco said:
Ok your probably going to hate me but the build.prop edit dosent work as i thought it did. I decided to try it my self before i took the time to write it out, and it does bypass setting up the phone (ie. google setup, location service setup), but not the ota programing as i had thought it did. Sorry
However now that your rooted have you tried flashing another rom and then see if you can use one of the tricks like 4 corners, access epst (##778), or call and hang up? The 4 corners trick, call and hang up, and selecting emergency call and typing ##778# choose edit mode and enter 000000, works on my rom, and on several other roms. Note it may not be ##778 on your rom, it could be ##data#, *#*#program#*#*, *#*#data#*#*, ##prog#, ##program#. I saw this which i have never seen before, turn the phone off then back on to get to the language select screen, press volume up, volume down, back, and search one at a time in quick succession
The only other way i know (and tested) to bypass it would be to rename /system/app/Phone.apk to Phone.apk.bak and then reboot. This will bypass ota programing. However by renaming the Phone.apk you can no lonher access EPST which you would need to enter your local carriers info.
You could also look in to QPST, a windows program that can be used to program a phone.
Click to expand...
Click to collapse
Its ok sir cmlusco, you're really a great help for me. i just want to know what am i going to edit in EPST after i access it, and is QPST is cdma workshop.
Sent from my MT11i using Tapatalk
gaiger said:
Its ok sir cmlusco, you're really a great help for me. i just want to know what am i going to edit in EPST after i access it, and is QPST is cdma workshop.
Sent from my MT11i using Tapatalk
Click to expand...
Click to collapse
Are you trying to activate it on a local network? If so you need to enter that carriers info in epst, you need to get that info from them.
If your just trying to use it as a mp3 player etc with no service, just change everything in nam settings to zeros. If it says 0004564 change it to 0000000.
Qpst and cdma workshop are similar type programs, but not the same program. Im not very familiar with cdma workshop and if it would work or not.
cmlusco said:
Are you trying to activate it on a local network? If so you need to enter that carriers info in epst, you need to get that info from them.
If your just trying to use it as a mp3 player etc with no service, just change everything in nam settings to zeros. If it says 0004564 change it to 0000000.
Qpst and cdma workshop are similar type programs, but not the same program. Im not very familiar with cdma workshop and if it would work or not.
Click to expand...
Click to collapse
thank you sir im going to use my phone as mp3, picture taking, video recording and gaming. Because i can't use verizon carrier, there's no verizon carrier here in philippines. Thanks a lot sir cmlusco you are really a great help for me
gaiger said:
thank you sir im going to use my phone as mp3, picture taking, video recording and gaming. Because i can't use verizon carrier, there's no verizon carrier here in philippines. Thanks a lot sir cmlusco you are really a great help for me
Click to expand...
Click to collapse
Here is some info on what exactly to change. http://forum.xda-developers.com/showthread.php?t=1475303
Im trying to help a friend switch from sprint to boost and i read the forum on here about how to do it and it seemed fairly straight forward. I just cant seem to get the *#197328640# (service mode) menu to come up. i punch it in and nothing happens. Every other menu works fine, im at a loss. i need unlock it so it reads correctly in DFS.
Thanks in advance
D
Dmoss090 said:
Im trying to help a friend switch from sprint to boost and i read the forum on here about how to do it and it seemed fairly straight forward. I just cant seem to get the *#197328640# (service mode) menu to come up. i punch it in and nothing happens. Every other menu works fine, im at a loss. i need unlock it so it reads correctly in DFS.
Thanks in advance
D
Click to expand...
Click to collapse
If you're trying to write values to it in DFS, don't you just need the MSL (SPC) and Samsung password? I assume you're trying to "flash" it to Boost?
LordLugard said:
If you're trying to write values to it in DFS, don't you just need the MSL (SPC) and Samsung password? I assume you're trying to "flash" it to Boost?
Click to expand...
Click to collapse
Yes i am but when i plug the phone in DFS only reads the phone as a modem and not as a device.
Did you first ##3424#, choose CDMA MODEM, tap below on Qualcomm Diagnostics, choose last option (DM+ADB...etc) ?
LordLugard said:
Did you first ##3424#, choose CDMA MODEM, tap below on Qualcomm Diagnostics, choose last option (DM+ADB...etc) ?
Click to expand...
Click to collapse
that i did not do... thanks
LordLugard said:
Did you first ##3424#, choose CDMA MODEM, tap below on Qualcomm Diagnostics, choose last option (DM+ADB...etc) ?
Click to expand...
Click to collapse
so i got the device to show up on in dfs but when i try to read any info off of it i get an error and it aborts the process.
GET SEC_CODE CPS_ERROR BAD_PARAM
OK, now did you input and send MSL and Samsung password, first?
LordLugard said:
OK, now did you input and send MSL and Samsung password, first?
Click to expand...
Click to collapse
yes i did.
Dmoss090 said:
so i got the device to show up on in dfs but when i try to read any info off of it i get an error and it aborts the process.
GET SEC_CODE CPS_ERROR BAD_PARAM
Click to expand...
Click to collapse
The only time i get that error is if i absentmindedly input either a wrong password. I know you said you did but check again if you put in the correct SPC/MSL and correct Samsung password (possible try all CAPS for the alphabets).
Also, your com ports connecting/showing OK?
LordLugard said:
The only time i get that error is if i absentmindedly input either a wrong password. I know you said you did but check again if you put in the correct SPC/MSL and correct Samsung password (possible try all CAPS for the alphabets).
Also, your com ports connecting/showing OK?
Click to expand...
Click to collapse
okay i got the phone to switch over but i dont have 3g and i get an error when i call i get an error 16
3G issues usually have to do with profile user information not set properly. Your profile 0 info needs to match.
LordLugard said:
3G issues usually have to do with profile user information not set properly. Your profile 0 info needs to match.
Click to expand...
Click to collapse
kool, got it thanks for you help. i appreciate it.
Hey everyone I've been searching the whole entire internet and xda to find out what I need to do exactly to get back LTE. I lost my IMEI after upgrading Cyanogenmod NIghtly without backup of efs folder. I was able to get the IMEI injected manually with NV writer/reader so I can connect to edge but only edge network 2g mode. What do I need or install or do to get back lte. The thread that people point to others that ive searched is deleted thanks
Try a touchwiz stock Rom, then:
Dial: *#197328640#, then select the numbers from the menu in the order: 11865.
Then from the dial pad:
Dial *#2263#
Select WCDMA
Select Wcdma all
Back (or go back to the dial pad again and dial *#2263#)
Select LTE
Select LTE all
Back (or go back to the dial pad again and dial *#2263#)
Select Automatic
Back key on the phone
Reboot
See what happens.
anything evewsfu
shortydoggg said:
Try a touchwiz stock Rom, then:
Dial: *#197328640#, then select the numbers from the menu in the order: 11865.
Then from the dial pad:
Dial *#2263#
Select WCDMA
Select Wcdma all
Back (or go back to the dial pad again and dial *#2263#)
Select LTE
Select LTE all
Back (or go back to the dial pad again and dial *#2263#)
Select Automatic
Back key on the phone
Reboot
See what happens.
Click to expand...
Click to collapse
thanks alot man
I had the same issue, this method didn't work for me.
So far I haven't seen a for sure fix . I tried everything uprooting back to stock , every method , even put the s3 in the factory box for 4months lmao . For real I have been beside my self not a noob my imei went , then reinjected. Still lost , there is post somewhere that a guy does fix them but have to ship it off .. hopefully there got to be a way dude . Good luck
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
ebubbastew said:
So far I haven't seen a for sure fix . I tried everything uprooting back to stock , every method , even put the s3 in the factory box for 4months lmao . For real I have been beside my self not a noob my imei went , then reinjected. Still lost , there is post somewhere that a guy does fix them but have to ship it off .. hopefully there got to be a way dude . Good luck
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I'm in the same boat. I managed to inject the IMEI, but can't get to 4G. After I reboot, I start out on LTE and get knocked back to EDGE within five minutes. Also, Samsung KIES does not recognize the firmware (even after I restore to a stock system).
I thought playing with the CSC to ensure that it matches the rest of the software might have an impact, but I get an error when I try the CSC changer software.
t.s.eliot said:
I'm in the same boat. I managed to inject the IMEI, but can't get to 4G. After I reboot, I start out on LTE and get knocked back to EDGE within five minutes. Also, Samsung KIES does not recognize the firmware (even after I restore to a stock system).
I thought playing with the CSC to ensure that it matches the rest of the software might have an impact, but I get an error when I try the CSC changer software.
Click to expand...
Click to collapse
I'm having the same problem as you. Were you able to find a solution???
shortydoggg said:
Try a touchwiz stock Rom, then:
Dial: *#197328640#, then select the numbers from the menu in the order: 11865.
Then from the dial pad:
Dial *#2263#
Select WCDMA
Select Wcdma all
Back (or go back to the dial pad again and dial *#2263#)
Select LTE
Select LTE all
Back (or go back to the dial pad again and dial *#2263#)
Select Automatic
Back key on the phone
Reboot
See what happens.
Click to expand...
Click to collapse
damn I was hoping this would fix my issue - but it didn't. Been stuck on edge for 3 days now. At first I lost my imei number, but was able to inject it back into the phone - now I can't get away from edge network. I want my 4G back lol
http://forum.xda-developers.com/showthread.php?t=2374063
Sent from my SAMSUNG-SGH-I747 using xda premium
No one comments on this person's suggestion.
The solution
Guys here is the solution (attached)
inject this items using NV reader/writer
was perfect for me
umar4u said:
Guys here is the solution (attached)
inject this items using NV reader/writer
was perfect for me
Click to expand...
Click to collapse
I failed to inject it to my device.
This worked.
umar4u said:
Guys here is the solution (attached)
inject this items using NV reader/writer
was perfect for me
Click to expand...
Click to collapse
umar4u, I can't thank you enough. I have been paying AT&T for 2 months for a phone that didn't even work as a phone. This fixed it. Download his file and refer to the video in this post to inject his file.
http://forum.xda-developers.com/showthread.php?t=1804117
This just saved my day... Thanks!
Although it says it failed on 3 things, it works!
Life Saver!!!
Everyone, this works!!!
umar4u said:
Guys here is the solution (attached)
inject this items using NV reader/writer
was perfect for me
Click to expand...
Click to collapse
Thank you so much! This is great! It worked! I tried every other possible fix and no avail. Then i came across this and boom! Thanks again! :victory:
you can try entering this menu * # * # 4636 # * # * into the first option on the telephony information and down to where it says set preferred network type and change it to LTE / GSM / CDMA auto (PRL)
umar4u said:
Guys here is the solution (attached)
inject this items using NV reader/writer
was perfect for me
Click to expand...
Click to collapse
Thank you for the solution Umar, but how did you figure out that these are the only NV Items needed? BTW, are you who I think you are?
maxqas said:
Thank you for the solution Umar, but how did you figure out that these are the only NV Items needed? BTW, are you who I think you are?
Click to expand...
Click to collapse
You are welcome. i found this file on internet, someone posted it. Basically it is NV items for 3g or 4g, I think.
And I don't know who you think I am.
Nice to see this worked for people.
---------- Post added at 01:14 AM ---------- Previous post was at 01:05 AM ----------
RayZhang said:
I failed to inject it to my device.
Click to expand...
Click to collapse
Hove you done this:
Connect phone to computer.
In Stock Dialer, enter *#7284#
A PhoneUtil Menu Should open
Press Qualcomm USB Settings button
select RMNET + DM + MODEM and press OK.
Open Device Manager and expand "Ports"
Note the COM Port # listed next to "Samsung Mobile USB Serial Port (COM#)
Ensure both boxes in Top bar are checked.
Click Connect in the Top Bar
Later you can write NV items
dont forget to Go back into the PhoneUtil menu and switch back to MTP + ADB
Thanks!
umar4u said:
Guys here is the solution (attached)
inject this items using NV reader/writer
was perfect for me
Click to expand...
Click to collapse
I registered just to say Thanks!!
I was trying different methods for hours, and this worked perfectly for me.
I searched for weeks for a solution!!! Thank you so much!! *___*
Hello,
I have question about my phone which can't boot futher provider logo and it cant go to recovery mod (when i try it vibrates couple of times and phone just restarts). The phone has non-removable back side so i can't remove battery.
Please help.
markokolic said:
Hello,
I have question about my phone which can't boot futher provider logo and it cant go to recovery mod (when i try it vibrates couple of times and phone just restarts). The phone has non-removable back side so i can't remove battery.
Please help.
Click to expand...
Click to collapse
you need to use flashtool to flash stock rom
But now my mobile data doesn't work
Yeah,I've done that and it fixed my phone. but i can't activate my mobile data doesn't some reason. I read something about setting APN but i don't know how to do it. Do you maybe know reason why my mobile data doesn't work? Thank you.
But now my mobile data doesn't work
mbskylian said:
you need to use flashtool to flash stock rom
Click to expand...
Click to collapse
Yeah,I've done that and it fixed my phone. but i can't activate my mobile data doesn't some reason. I read something about setting APN but i don't know how to do it. Do you maybe know reason why my mobile data doesn't work? Thank you.
markokolic said:
Yeah,I've done that and it fixed my phone. but i can't activate my mobile data doesn't some reason. I read something about setting APN but i don't know how to do it. Do you maybe know reason why my mobile data doesn't work? Thank you.
Click to expand...
Click to collapse
you can connect wifi and go to setting to update the apn setting
But now my mobile data doesn't work
mbskylian said:
you can connect wifi and go to setting to update the apn setting
Click to expand...
Click to collapse
I can connect ti wi fi, but i don't know how to update APN settings(Xperia T3)
markokolic said:
I can connect ti wi fi, but i don't know how to update APN settings(Xperia T3)
Click to expand...
Click to collapse
now i am not use this phone .
i forget it .sorry
may in network setting
But now my mobile data doesn't work
mbskylian said:
now i am not use this phone .
i forget it .sorry
may in network setting
Click to expand...
Click to collapse
I'ts okey thank you anyway.
mbskylian said:
now i am not use this phone .
i forget it .sorry
may in network setting
Click to expand...
Click to collapse
good