Related
Just wondering if someone could clarify about this model over the rest. Am I limited to rom's just made for the M model then? or do the normal roms I see like the cm7 ones in the development section of this model work on the m model?
Check this out. It might of some help to you.
http://forum.xda-developers.com/showpost.php?p=17332208&postcount=1013
Hi I have the "m" model as well and I haven't had much luck with the majority of roms made for the euro version of our phone. Darkshado had made a ROM called ArpegGioMod ROM that is made for the m series and works quite well. I use his ROM and I'm quite happy with it versus the stock ROM.
I flashed cyanogenmod 7.1 on my phone using Odin and by leaving out the phone package which seemed to work pretty well, but after a day my phone could not connect to the network to make phone calls or use 3g so I flashed back.
Let me know how it works for you. Thanks.
Sent from my GT-S5660M using XDA App
I have the s5660m as well and I've been using cyanogenmod 7.2 rc0 build4 since it came out. Everything works except gps.
I also have the s5660m , but it is unlocked. I am able to install any firmware, once is it a GIO rom. Go to ... http://forum.xda-developers.com/showthread.php?t=1368587 It has a program to unlock your phone and also some other samsungs. Try it out.
I have an s5660m and I can download CM7 and CM9
I also have an unlocked and rooted 5660M. Has anyone been able to successfully install ClockWordMod recovery on the M? If so, please post a short how to.
Thanks
Hi. I've a related question since i've a "L" model (as in S-5660L). Am i stuck like the M models or can i do whatever i want with this?
adiboy101 said:
I have an s5660m and I can download CM7 and CM9
Click to expand...
Click to collapse
Everyone can download that even iphone users
Sent from my GT-S5830 using xda premium
Gerrydd said:
I also have an unlocked and rooted 5660M. Has anyone been able to successfully install ClockWordMod recovery on the M? If so, please post a short how to.
Thanks
Click to expand...
Click to collapse
Yes, try the ClockworkMod Recovery from this thread, and follow the instruction in the second post.
http://forum.xda-developers.com/showthread.php?t=1421650
Thanks Lypang
Gio s5560m Stuck data mode deactivated.
Hello all,
I bought a Gio M about a month ago good phone and happy so far. Problem I've had is 3g is OFF ---> power button- Phone Options menu - Network Data mode is deactivated. Push to turn ON and stays deactivated. Go into system, network, and yes data packets is checked on.
Phone is stock no tweaks no extras, did a clear cache and reset phone to OE spent 2 hours with tech support on Virgin canada and Samsung. Virgin blames phone, Samsung Blames virgin 3g network.
My question is could the phone have a bad firmware flash from factory it came with 2.3.4
I am going to go back to Best buy next weekend and see if I can test with another gio. If 3g works on test unit then I'll send this one in for repairs I guess.
Any other suggestions?
Did you try another Virgin SIM? That's one thing I'd look into.
Also if you're in the Montreal area or in the GTA (I'm not sure where else) there are Samsung Service Centres you could take this to.
Show up in person and have them diagnose the problem. You might even be able to wait while they work on it if you have a bit of spare time.
2.3.4 is the proper version number for the stock ROM on the 5660M. No updates so far.
Gio s5560m no 3g
Have not tried another virgin sim. I do have a spare that came with the phone spose I could try it although its sealed up in the packaging still.
Live in northern Alberta and the nearest city with virgin phone sales is 2hrs away hence the wait to get fixed. Surprise surprise Samsung did not phone me back today like they said they would either.
Found one other post on here of a fellow in Norway with no 3g can't enable or disable but no answers on his post to the problem. I'll wait till the weekend and go to the city and see if Bestbuy has an activated sim they can put in and try.
Thanks for the help and I will update when I get it figured out.
i had the same connection problems, try going back to your stock ROM and take note of your APN settings, once you flash back to CM you'll notice the rom made several changes!
changing the APN settings back to stock, fixed any connection issues i had
hope i helped! (i'm using CM7.2 RC1 B1 KANG on my BELL 5660M)
s550m 3g
Problem is I am using the stock rom, the rom that came with the phone is the one giving the problems. Sending the phone back for "repairs" and we will see what comes of it.
I'll keep you all updated.
wutname said:
i had the same connection problems, try going back to your stock ROM and take note of your APN settings, once you flash back to CM you'll notice the rom made several changes!
changing the APN settings back to stock, fixed any connection issues i had
hope i helped! (i'm using CM7.2 RC1 B1 KANG on my BELL 5660M)
Click to expand...
Click to collapse
I'm new here and I tried to read all the information to get a good idea around flashing the S5660M. I also have the bell version.
I'm going to put down the steps, if anybody can give me pointers or correct any mistakes. That'd be great, I want to put CM7.1 or 7.2, whichever one is stable enough for all functionality to work. Speed is not an issue as I am giving this phone to my grandpa who needs a chinese language display system which Samsung didn't include in the original ROM.
1. Root phone
2. Install ClockworkMod Recovery
3. Reboot into recovery mode, make backup using Nandroid? I heard there's other tools that can be used. I'd like to backup the original ROM.
4. Download the desired CM from recovery mode onto SD card
5. Delete cache and wipe data
6. Choose the new ROM to be flashed and wait
I think that's the general idea, is there any key steps I am missing?
Sorry again for asking but I want to make sure I got the correct steps for S5660M.
gotenk1 said:
I'm new here and I tried to read all the information to get a good idea around flashing the S5660M. I also have the bell version.
I'm going to put down the steps, if anybody can give me pointers or correct any mistakes. That'd be great, I want to put CM7.1 or 7.2, whichever one is stable enough for all functionality to work. Speed is not an issue as I am giving this phone to my grandpa who needs a chinese language display system which Samsung didn't include in the original ROM.
1. Root phone
2. Install ClockworkMod Recovery
3. Reboot into recovery mode, make backup using Nandroid? I heard there's other tools that can be used. I'd like to backup the original ROM.
4. Download the desired CM from recovery mode onto SD card
5. Delete cache and wipe data
6. Choose the new ROM to be flashed and wait
I think that's the general idea, is there any key steps I am missing?
Sorry again for asking but I want to make sure I got the correct steps for S5660M.
Click to expand...
Click to collapse
You are right. But remember after you flash CM7, then install gapps.zip wich can be found in cm7 thread, so you have google apps, then your done.
Sent from my GT-S5660 using xda premium
voetbalremco said:
You are right. But remember after you flash CM7, then install gapps.zip wich can be found in cm7 thread, so you have google apps, then your done.
Sent from my GT-S5660 using xda premium
Click to expand...
Click to collapse
Thanks for your info.
I read some more stuff yesterday(a lot of variance )
Some people mentioned titanium backup. Which one is better? nandroid or titanium backup to save up the original ROM?
Also, is Universal_GB_ROOT_v2.zip the best/safe way to root a S5660M?
gotenk1 said:
Thanks for your info.
I read some more stuff yesterday(a lot of variance )
Some people mentioned titanium backup. Which one is better? nandroid or titanium backup to save up the original ROM?
Also, is Universal_GB_ROOT_v2.zip the best/safe way to root a S5660M?
Click to expand...
Click to collapse
Yes, the gb_root.zip or superoneclick.
Superoneclick can be downloaded from shortfuse.org
Make sure you have the usb drivers, usb debugging on.
Then connect your phone via usb, wait for it to connect and press root, then your done
Sent from my GT-S5660 using xda premium
Hi Guys,
Just had my Sony Arc S, love the phone, I previously had a Samsung GS2 and Desire and fiddled about with them rooted custom firmware etc.
Problem is I'm finding the Arc quite confusing here are some questions below hopefully someone can help, btw I have done a lot of reading before posting this but I'm still confused.
1. Is the Sony Arc "S" unlocked with regards to the bootloader?, I have checked with the *#*#7378423#*#* sony give and mine says allowed "yes".
2. I would like to install a better kernel (maybe doom kernel?), can someone recommend one, also im currently on 0.42 should I be going to 0.62?
3. In what order must I unlock bootloader, root, and install kernel or custom rom also how will I get CWM on?
4. Whats the easiest method of unlocking the bootloader, and rooting I have seen zerg one click does this work?
5. Will I have to partition my sd card to use link2sd or any other app to sd app if so what ext and swap do I need?.
Basically I'm really confused the GS2 was a lot more straight forward than the arc, the 0.42, and 0.62 is that the original kernel and if so if I installed doom kernel would it just write over it?.
What I would like is to make my Arc S the best it can be in terms of free space, speed and battery, I really like the Sony OS and dont really think ill be putting a custom rom on there as I like the sony widgets also unless someone can recommend one.
Also I'm looking forward to ICS coming out in march, will I be able to officially upgrade after unlocking the bootloader and rooting?.
Thanks kindly guys for all your help
Mav
1 . Bootloader is unlockable.. but not unlocked.. you'll need to go here to unlock it.
2. Latest version of doomkernel is very good.. I'm running it overclocked to 1.6Ghz. following the instructions on his thread for that.
3. You should unlock the BL then install the the f/w you want..then install the kernel.. then if it's not pre-rooted.. root it! Think Doomkernel is pre-rooted actually!
4. Not required!
5. If you're using the Android facility to move apps to SD you don't need to partition.. you only need that for link2SD..
Hope that helps!
---------- Post added at 10:21 PM ---------- Previous post was at 10:18 PM ----------
You should also install the latest version of V6 Supercharger to make your home screen stable and smoother..
There's a few tweaked versions of the SE system on the dev pages if you fancy a try..
The SE stuff is actually dead easy once you've done it a couple of times..
You should also download x10 flashtool which makes it easy flashing roms (standard SE ones from different regions, or tweaked, or completely customised!)
and yes - you'll still be able to upgrade to ICS.. just not through the Sony update service - you'll have to wait til someone posts the new firmware on here (which will usually be within about 5 minutes of it being made live!!)..
Hi Iceman,
We only need goose now LOL.
Im Still a little confused is 0.42 and 0.62 the radio then?, does that mean I can unlock bootloader then upgrade radio to 0.62?.
also how do I install the doomkernel without having clockwork installed must it be done through adb?
with the SE roms you say there are some tweaked ones out there any good ones you have tried?
I will def take your advice and install V6 Supercharger to hopefully make it run smoother.
I came from having the GS2 which I loved but I sold it on for £310 and got a very reasonable contract with the arc s, tbh I love the look of the phone and the SE OS, it is IMO much nicer than touchwiz, but I do find it lags slightly when there are lots of widgets on screen.
Anyway thanks a lot for your help, much appreciated
Hi - I'm only using stock SE firmware, which I'm then tweaking myself - with things like v6, removing unwanted system apps etc (using titanium).
.42 and .62 are the firmware versions... there are also basebands which control the radio and they end with . numbers too.. but you needn't worry too much about that initially.
once you've unlocked the boot loader you can download the kernel and put it in your adb folder on your PC.. then type fastboot flash boot filename.img (where filename.img is the actual name of the kernel you've downloaded and stored in your adb folder).. this will flash the kernal onto your phone...
V6 is awesome.. I've selected the options make the launcher "bulletproof" and "balanced 3" for the memory management.. The only thing that holds the arc back from being as good as the SGS2 is the lack of memory (which is why V6 is so good as it sorts out the memory management really well).
---------- Post added at 10:57 PM ---------- Previous post was at 10:56 PM ----------
(PS - you can be my wing man anytime!)
Haha (you can be mine LOL!)
Right things starting to clear up slowly LOL, I've just connected my phone now and PC companion is asking me to upgrade to 0.62, should I do that first then unlock bootloader then kernel, I think i'll be like you and just tweak the stock rom rather than installing a new one as I think there's not many out there that are hugely improved.
I like the idea of removing all the crap apps though and will look into that as long as I dont **** anything up LOL.
Thanks again buddy
No worries.. go for the upgrade.. it'll be easier than doing it after you've unlocked the BL..
If you use titanium you can freeze stuff before you remove it altogether to make sure the phone works ok without it!.
Just one thing I've thought of.. is your Arc S unbranded? you may not be able to unlock the BL via the SE unlock tool if it is BRANDED..
Yes the phone is unbranded, a little worried as some peps are stressing when they upgraded to 0.62 with regards to rooting, this is really whats confusing me, dont want to upgrade then not be able to root or unlock BL etc thats why I asked
didnt know that about titanium thats handy! lets me mess about LOL
don't worry about rooting... if you unlock the BL and instlall doomkernel v18 you'll have root.. I'm running .62 and fully rooted via the kernel...
in any case you can always use flashtool to change the firmware back to .42 if you want to!.. flashtool works in the same way as SEUS or PC Companion, only it allows you to choose which firmware to install..
---------- Post added at 11:26 PM ---------- Previous post was at 11:24 PM ----------
The bootloader and kernel sit "beneath" the firmware (.42/ .62) so it's not affected by what's above it in the stack.
Brilliant thanks for clearing that up iceman, so its upgrade to 0.62 then off to unlock BL, install doomkernel v18 via adb, custom rom if wanted or remain on stock and install supercharger, then titanium backup freeze apps trial and error then time to get rid of crap apps thorugh file explorer.
Sounds good, hopefully it will all go well.
All your help was much appreciated
No problem. You can also uninstall apps through titanium too (including system apps)... It's pretty powerful!
Sent from my LT15i using xda premium
im_iceman said:
No problem. You can also uninstall apps through titanium too (including system apps)... It's pretty powerful!
Sent from my LT15i using xda premium
Click to expand...
Click to collapse
Well managed to upgrade to .62 and unlock BL, install Doom Kernel and wifi modules and have started to remove some bloatware using Flo's tut, was just wondering if the following apps could be removed?
facebook music and vids & games & apps
livewire manager
video unlimited
Also had a look at the tut for super charger v6 and looks really compilcated is it def worth having on the phone?
Finally if I was to do a full reset after removing bloatware would .62, doomkernel, root etc all still be there and would removing bloatware cause anything like bootloops etc?, just want to be on the safe side just in case I need to restart the phone.
Thanks Iceman
I'd keep the liveware manager.. the others you can get rid of..
V6 looks quite complex, but if you just step through it it's not so bad... a mate of mine did a detailed tut for it here... might help.. you probably only need section 3 though!
If you did a factory reset it would leave the kernel and .62 firmware, think the bloatware would stay gone too..
Hi iceman,
I've pretty much done everything to my phone apart from the supercharger, thanks for the link i've looked into it and it doesnt seem that hard but i've come up against a problem.
I recently bought a gold sim card number from ebay and ported it from vodafone to my current sim virgin, the number got ported so when I phone it comes up with my new gold number, but my arc keeps on displaying my old number in the contacts and its really confusing me so I've tried everything, battery out, simcard out etc etc this didnt work. So I decided to full factory reset the phone and reset everything as well, it did as you said on your previous post and kept 0.62, doom kernel and most of the junk apps were gone but not all, anyways on testing everything was ok apart from the wifi not connecting and also the home key doesnt work??.
So again i've tried factory reset, putting all the junk apps back in, battery out and even flashing doomkernel again but nothing, i'm kinda wishing I was back on stock right now LOL.
I know these may be tricky problems but do you have any advice with regards to the sim card number and also the home button and wifi problem?, ps home button does function as it works in CWM.
Thanks a lot
Mav
Hi! First I think I can help you about Wi-Fi. Did you forgot to instal MODULES for DooMKernel (v15 onwards)? Don't know what your homebuton problem might be.
And my questions:
1.Can I change baseband from -36 to -64 at any time, or must I flash whole ROM or Kernel again?
2.Will I be able to uninstall V6 Supercharger if I want to?
3.How could I made whole backup of my ROM (using arconium 6.1)?
1. Yes, just flash thecrequiered libs
2. Yes, there's an uninstall option.
3. Using clockwordmod recovery
Sent from my iPad 2 using Tapatalk
The phone number problem is an android issue - nothing to do with the phone per se... you'll need to put your new sim card into a different non-android phone and update the "my phone number" settings... (I used my old Samsung Tocco!)..
Wifi - you may need to re-install the wifi libs as per SEK610i's suggestion..
Regarding home button... mmm.. never seen that before!.. have you got root explorer or other file manager?
Have a look in here... /system/usr/keylayout/pm8058-keypad.kl
does key102 say "home wake_dropped" next to it? it should!
im_iceman said:
The phone number problem is an android issue - nothing to do with the phone per se... you'll need to put your new sim card into a different non-android phone and update the "my phone number" settings... (I used my old Samsung Tocco!)..
Wifi - you may need to re-install the wifi libs as per SEK610i's suggestion..
Regarding home button... mmm.. never seen that before!.. have you got root explorer or other file manager?
Have a look in here... /system/usr/keylayout/pm8058-keypad.kl
does key102 say "home wake_dropped" next to it? it should!
Click to expand...
Click to collapse
Hey Iceman,
Thanks for the reply, I had modules installed for wifi. Didnt know that about a ported number only problem no old phones LOL, nevermind will have to just add a new my number 2 or something.
Anyways managed to sort the home key issue, after installing arconium 7.02 beta, I installed arconium 6.01 and all works well.
I should have done this at the start rather than delete the junk apps myself as arc 6.01 works really well.
Infact I have setcpu installed the phone is on brazilian wax and it is as smooth as the GS2 now, even with a big live wallpaper for the background.
So I'm really happy now, I also installed volume + to try and sort out some sound issued im having basically the microphone is a little crackly and vibrates when listening to some songs and youtube vids, volume + has improved it a bit, I know its not my phone as my previous arc s also had it and I sent it back thinking it was faulty, although that was also restarting itself from time to time too.
Anyway thanks very much for all your help you've been a star mate!.
always happy to help a 1990's throw back top of the class, american fighter pilot, like myself!
hehehe
sorry If you drop your coffee its just me and goose doing a flyby!
Hi Iceman,
Any chance you could help please?,
Just managed to create my own Rom I know unbelievable right?, well I used bits and bobs from the Arc rom, used dooms kernel, and bits from themes and new s apps etc and tweaked a bit with lovely new themes and voila perfect.
problem is being too much of a smart arse I formatted my sd card just as I was about to install an updated leaner rom that i'd made, so i decided I would just connect the phone up to fastboot and install the rom from there.
Well I thought the system command was to install a rom, so i typed fastboot flash system "my roms name and .zip at the end it erased then wrote quite quickly and alarm bells started to ring cos I thought no way thats installed a rom.
Anyways I just get doom kernels logo now and nothing else it wont go further for me to get into CWM.
Although its allowing me into fastboot so hopefully its not bricked.
I'll post this question in main thread also, as I'm stressed LOL!
Cheers
Mate
Hello folks! As the title says I have quite a strange issue with some kernels (Franco,LeanKernel and STOCK!!). I flash the kernels after flashing a rom ,doing it clean(all the wipes) and the phone is working fine for couple hours or a day,after that it just going verry sluggish even in appdrawer or when switching desktop screens. I looked at the CPU frequencies and they change as they shouldn't,I can tell that somethig isn't right with the cpu...I have this issue only with those kernels. I tried stock roms,4.2.x roms,flashed even google images to be sure it's stock,tried them with AOKP 4.2 and 4.1 ,CNA and the list could go on...
Is someone else having the same issue??
Any fix for this? I really want to try franco's kernel!!!
1. Hmmm, are you running a live wallpaper?
2. Do you face the same issue while using Trinity Kernel?
3. Are you sure you do not have any app such as SetCPU which is controlling the speed of CPU?
4. If you set the CPU speed back to normal, does this fix the issue?
5. How much space is mostly left on your sdcard?
I hope the answers of these questions will help to identify your problem much bettER
I don't have the same issue with faux's and trinity kernels . I don't have any program,i don't use a live wallpaper, how I can speed back to normal the cpu?
calinoii said:
I looked at the CPU frequencies and they change as they shouldn't
Click to expand...
Click to collapse
I thought you have checked the CPU speed/frequency using an app like "AnTuTu CPU Master".
calinoii said:
how I can speed back to normal the cpu?
Click to expand...
Click to collapse
Using AnTuTu CPU Master, check the speed set for the CPU when the phone is sluggish and if it something other than the normal 1200 MHz then modify it back to normal. This is what I meant
The frequencies changes verry verry fast,that's when the phone becomes sluggish,i have mini freezes,lots of them
calinoii said:
The frequencies changes verry verry fast,that's when the phone becomes sluggish,i have mini freezes,lots of them
Click to expand...
Click to collapse
I think some background processes are causing this so the CPU is trying to respond to them.
I suggest that you do a full wipe, install a ROM and use Franco's kernel, but do not install any other application on your phone, only default ones installed already with the ROM, maybe Gapps as well just to have a usable phone for some time, then check after a day whether it is again sluggish although there are no applications at all or it is still running fine. At least we would be able to know that maybe one of your application is not compatible well with these kernels and causing this mess.
You may want to avoid wiping so try to force stop the applications running in the background (and cached processes as well) to see if one of them is causing this problem.
Good Luck
I did wipe the data and didn't install any application and I have the same issue :-s
calinoii said:
I did wipe the data and didn't install any application and I have the same issue :-s
Click to expand...
Click to collapse
Do you use any widgets?
Nope
I am not sure I have helpful suggestions anymore except to be sure that you are using the correct Franco kernel whether you are running a 4.1 ROM or 4.2 one.
I hope other members can solve this problem for you. Maybe you will get a bettER help if you discuss this with the Franco kernel users on the Franco kernel thread.
Thanks anyway,i'll post this issue on franco's kernel thread and hope for a fix...and be sure i flashed the correct version of kernel )
Anyone? Please?
calinoii said:
I have some others with the same problem,but thisis the latest,no one could help me this far.I already did what you suggested me...I`m sure I did the clean wipes,just installed gapps and nothing else...when it was getting little hot the freezes were starting too,I think i did all I could,many people in this forums adviced me and still nothing,maybe franco's the only one who can help me with this...
Click to expand...
Click to collapse
Carrying on from here where we were in franco's thread. If you're flashing gapps then clearly you aren't using stock ROM like I told you to try. So, my suggestion to you for troubleshooting remains the same:
osm0sis said:
Well that's really peculiar. I'd try flashing stock again using fastboot. I'd fastboot oem lock, then fastboot oem unlock to wipe, then flash the entire image set as in efrant's thread just to make sure it all gets wiped. But unfortunately, like I said, if stock kernel doesn't work over a fresh fastboot flash of Google's factory image on your device there's still something very wrong, and it's likely wrong with the device itself.
Click to expand...
Click to collapse
osm0sis said:
Use the latest Google Factory Image for your device like I suggested, then you can see if you get the OTA immediately or you can flash it yourself. Do all this before you put any apps on, and don't let it put any apps on and see if you still have the issue with a completely stock setup.
Click to expand...
Click to collapse
Please report back only when you've followed that to the letter.
Tried both,the ones from the images,and the gapps on a stock flashed rom via recovery...I'm trying to resolve this for over 2 weeks now...
L.E : Ok,I will pm you when I manage to have some time for doing this again,thanks for your kindnes
I don't care how many times you think you've done it correctly before, I want you to try it AGAIN. And make sure you've completely wiped by using fastboot oem lock and unlock, then follow efrant's thread to the letter for flashing the entire image set. Factory Images ONLY, no stock-ish kitchen garbage.
I'm happy to help you but you've got to follow my instructions, since this is what I would be doing if I had this issue on my device.
Ok,I will,is there anyguide for locking and unlockingthe bootloader ? or simply "fastboot oem lock" and after "fastboot oem unlock" ?
calinoii said:
Ok,I will,is there anyguide for locking and unlockingthe bootloader ? or simply "fastboot oem lock" and after "fastboot oem unlock" ?
Click to expand...
Click to collapse
Yeah those are the commands. That's it. :good:
I think it's mentioned in efrant's post too, but no special guide necessary. Use the adb and fastboot that he attached too if you're new to fastboot.
I'm used to fastboot,I don't even need the guide to see the commands now,I think I used them like 100 times last 2 weeks )
Fair enough. Please follow the guide anyway though, and be sure to also flash userdata.img and recovery.img to be completely stock. You can fastboot boot cwm.img if you need it to flash your OTA afterwards. We just need you at 100% stock so we can try to figure this thing out. Also maybe hold off on adding your Google account so it doesn't start forcing apps onto your device. It could very well still be a rogue app issue so we need to try and keep your device as empty as possible to see if we can rule out hardware defect. :good:
Should I install any apps?
I did everything you said,now i'm waiting for it to boot up
I'm using Snipers PACMAN, and battery just seems to drain way to fast. It is the latest push. Being newly registered on here I hate to introduce my self this way but I need advice. What tweaks are being used by people for the SPH-D710 to help with this issue? I originally started with the CM 10.1 rom and found I had no data, flashed a different modem. Still no data, switched roms and now have data....go figure! But the battery drain is killing me, I've got it throttled back as far as I can go and it still be a daily driver. So anyone have any suggestions?
Godlys Comadose Tweak pack works great:thumbup:
Give it a shot and thank him while you're over there...here's the link
http://forum.xda-developers.com/showthread.php?p=39080082
OK....now I'm lost as to which to try and use.....reading the posts to the provided links seems to give contradictory information as to where to start this journey.....
Sent from my SPH-D710 using xda premium
Most 4.2 Roms use ICS modems. As for battery us betterbatterystats found here on xda or gsam in the play store to determine if there's any rogue apps keeping the phone from sleeping. I also do manual syncing. Greenify is a great app to keep apps from running on their own. You can also use a custom kernel to limit max frequency and even undervolt. Kernels also come with different governors
Sent from my SPH-D710 using Tapatalk 2
godzilla61 said:
OK....now I'm lost as to which to try and use.....reading the posts to the provided links seems to give contradictory information as to where to start this journey.....
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Try the latest version....2.1
Anybody on this thread know anything about the pegasusq governer or how to implement it/install it?
rapman543 said:
Anybody on this thread know anything about the pegasusq governer or how to implement it/install it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=24233103&postcount=3
Read...Read...Read
After reading through the above posts you should have some useful ideas about what this governor does.Also...as for installing a governor, they will be included in the kernel that flashed with ur rom or a kernal of ur choosing(MAKE SURE IT WILL WORK WITH THE ROM YOU HAVE) Im new to this, so if there is another way I dont know about it. Do ur research... As for setting a governor.. There are many roms with built in performance controls as well as many apps to set them. I suggest (set cpu) . It has a setting that will make a zip so u can recover from ur settings if u bootloop. This is found after u install and give it root permission. Hit ur menu button and click SAFE MODE. You should have a nandroid; always and just because.I hope this helps.. Remember...Read...Read...Read..lol.. Good Luck.Also read this http://forum.xda-developers.com/showthread.php?t=2005306
Gil81 said:
http://forum.xda-developers.com/show...03&postcount=3
Read...Read...Read
After reading through the above post you should have some useful ideas about what this governor does.Also...as for installing a governor, they will be included in the kernel that flashed with ur rom or a kernal of ur choosing(MAKE SURE IT WILL WORK WITH THE ROM YOU HAVE) Im new to this, so if there is another way I dont know about it. Do ur research... As for setting a governor.. There are many roms with built in performance controls as well as many apps to set them. I suggest (set cpu) . It has a setting that will make a zip so u can recover from ur settings if u bootloop. This is found after u install and give it root permission. Hit ur menu button and click SAFE MODE. You should have a nandroid; always and just because.I hope this helps.. Remember...Read...Read...Read..lol.. Good Luck.
Click to expand...
Click to collapse
+1
You identify yourself as "new to this" but you nailed this post 110%!! Many people would do well to take what you said here to heart. If they did there would be MANY fewer "help me" threads.
CyberpodS2 said:
+1
You identify yourself as "new to this" but you nailed this post 110%!! Many people would do well to take what you said here to heart. If they did there would be MANY fewer "help me" threads.
Click to expand...
Click to collapse
Thank You...... I went ahead and added another link for him to read. I hope it helps. As to what you said, I like to think of myself as the poster child for the search button..lol..I think if you do the research it makes you feel better when it works and it is more likely to stick with you. This site is so great about that because there is just so much knowledge here to learn.I think some people get over-whelmed by it though or they are just unsure and need that go ahead push to know it works.
Ok since I can't ask a Dev a question about the kernel I want to install.....which I kinda understand, but being stuck not being able to ask questions about something specific after reading all the pages blows! (rant off) [Kernel] Lightning Zap! Phase 4 Updated 15JUN13 is causing a boot loop, I followed all the instructions to the letter, crossed every T, dotted all the I's. Thank god for backup! Since I can't ask the Dev a question I'm stuck!
godzilla61 said:
Ok since I can't ask a Dev a question about the kernel I want to install.....which I kinda understand, but being stuck not being able to ask questions about something specific after reading all the pages blows! (rant off) [Kernel] Lightning Zap! Phase 4 Updated 15JUN13 is causing a boot loop, I followed all the instructions to the letter, crossed every T, dotted all the I's. Thank god for backup! Since I can't ask the Dev a question I'm stuck!
Click to expand...
Click to collapse
Well, you're commenting on a thread about battery life, but not posting about battery life. That's not going to help you much.
I also read that you want to ask a question, but I don't see a question in your post. If you do have a question, a great place to post it would be here: [Official] One Stop FAQ Thread - Noob Friendly (All questions go here). Okay? :good:
erikalin said:
Well, you're commenting on a thread about battery life, but not posting about battery life. That's not going to help you much.
I also read that you want to ask a question, but I don't see a question in your post. If you do have a question, a great place to post it would be here: [Official] One Stop FAQ Thread - Noob Friendly (All questions go here). Okay? :good:
Click to expand...
Click to collapse
Well let me clarify it for you, it's my thread. The original question is still valid being as I was pointed this direction by a reply to my original post. Let me lessen your confusion on this matter......What other steps can I take to increase battery life......scripts didn't seem to help and a tweaked kernel put me in a boot loop....and whom do I ask if not the DEV?
godzilla61 said:
Well let me clarify it for you, it's my thread. The original question is still valid being as I was pointed this direction by a reply to my original post. Let me lessen your confusion on this matter......What other steps can I take to increase battery life......scripts didn't seem to help and a tweaked kernel put me in a boot loop....and whom do I ask if not the DEV?
Click to expand...
Click to collapse
Hey bro, easy on the tone. Because there are so many ways to ask the question, the best way is to just spell it out how you did above. Battery life depends on the apps/ROM/user all at the same time. I am on Project X ROM. It has Crossbreeder installed. Now I am not no where informative about that app other than a lot of people like it. So with that being said and it is installed on the ROM, I leave it. I also have ROM Toolbox Pro. I have adjusted my CPU control to 1000MHZ. I also have DS Battery Saver Pro set to custom and to kill all apps when the screen goes off. Last the ROM I am on comes with Greenify. A great app in saving battery. I also turn off data and only have WIFI on when I need it. No need to just let things run. With that I have had 50% battery life left after 11 hrs. That is my setup and may not work for you. The main thing is to understand that battery life for EACH phone is different no matter how many common denominators people may have. Team Venum did a comparison of ROM's and their respective battery life. I don't know the post, but if you type "battery life" in the search, then I am sure you can find it. As for you response, I was in your shoes at one time. It does help to be specific in your questions. Not saying that you weren't. Reading each and every post will get tiresome, but if you type in what you want in the search, you will get a slew of post to get info. I have only been a member for 4 months, but I have learned how to flash a ROM, Mods, push and app, setup custom home screen. I have even been given the honor of testing a ROM. If you still need help, you can PM me and I will do what I can. Have a great one.
godzilla61 said:
Ok since I can't ask a Dev a question about the kernel I want to install.....which I kinda understand, but being stuck not being able to ask questions about something specific after reading all the pages blows! (rant off) [Kernel] Lightning Zap! Phase 4 Updated 15JUN13 is causing a boot loop, I followed all the instructions to the letter, crossed every T, dotted all the I's. Thank god for backup! Since I can't ask the Dev a question I'm stuck!
Click to expand...
Click to collapse
Its fine,you can rant here...lol..Ok ,I need more info.....
rom you're try to use with lz kernal
how you went about flashing said kernel
did you have any other tweaks or mods flashed before flashing lzp_4
All of this info is important, so I can tell you what is wrong....Thanks..
Gil81 said:
Its fine,you can rant here...lol..Ok ,I need more info.....
rom you're try to use with lz kernal
how you went about flashing said kernel
did you have any other tweaks or mods flashed before flashing lzp_4
All of this info is important, so I can tell you what is wrong....Thanks..
Click to expand...
Click to collapse
Thanks Gil, this is exactly what I have done.
1. flashed from 4.03 to WILD-FOR-THE-NIGHT-07052013-d710, had no data....tried to find a fix for that...gave up after trying tweaks to help with the battery issue and no data.
2. Clean install of d710_PAC_JB_4.2.2-v23.0.0_20130719-015400, now have intermittent data, wifi works, blutooth works, flashed Fl24 modem with no apparent improvement in data connectivity, thought after reading a kernel flash might fix issues, here comes the boot loop....flashed smdk4412_p4 waited patiently for 2hrs watching Pacman chasing ghosts.....booted into recovery and ran my backup tried it 2 more times on clean flashs gave up after 5 hrs. By clean I mean wipe/reset, wipe cache, wipe dalvik, install from zip.
3. this is how I installed the kernel:
Make a backup
Download .zip to PC
Transfer .zip to sdcard
Reboot to recovery
Flash
Phone automatically rebooted after install
waited and waited......boot back into recovery. restore by backup.
everything has been done with CWM based recovery. I'm stumped....frustrated to no end......
godzilla61 said:
Thanks Gil, this is exactly what I have done.
1. flashed from 4.03 to WILD-FOR-THE-NIGHT-07052013-d710, had no data....tried to find a fix for that...gave up after trying tweaks to help with the battery issue and no data.
2. Clean install of d710_PAC_JB_4.2.2-v23.0.0_20130719-015400, now have intermittent data, wifi works, blutooth works, flashed Fl24 modem with no apparent improvement in data connectivity, thought after reading a kernel flash might fix issues, here comes the boot loop....flashed smdk4412_p4 waited patiently for 2hrs watching Pacman chasing ghosts.....booted into recovery and ran my backup tried it 2 more times on clean flashs gave up after 5 hrs. By clean I mean wipe/reset, wipe cache, wipe dalvik, install from zip.
3. this is how I installed the kernel:
Make a backup
Download .zip to PC
Transfer .zip to sdcard
Reboot to recovery
Flash
Phone automatically rebooted after install
waited and waited......boot back into recovery. restore by backup.
everything has been done with CWM based recovery. I'm stumped....frustrated to no end......
Click to expand...
Click to collapse
First off...I have had the lzp_4 boot loop on me. I pulled the battery,waited about 2 min. Put it back in and booted to recovery. Then I wiped cache and dalvik. Rebooted and it took off(booted fine). I have no idea why or how, but this worked for me. Now to my main concern. If you came straight from ics to a jb rom I think this is going to cause you issues, if you hadn't been on jb before. I suggest the one - click full restore(it wipes data,so back-up you're internal memory).This will get you're phone partition right for jb. After this. I think you should be able to flash what you want with no problems. I didn't see a problem with how you flashed. Wipe cache and dalvik on the kernal flashes you do.Here's the link for the one -click..
go to linked page and click on download ota at top of page
I would read through the page it sends you to well.Don't forget to thank those guys..Hope this helps.Hit me up if it doesn't.
.http://forum.xda-developers.com/showthread.php?t=2148072
Doing a one click restore worries me, I'm not on sprint any more and worried about losing my flash to my current carrier. Is this a concern I should have since I'm not used to working with odin? I'm more than willing to try another ROM also, I'm not locked into this by any means.....
godzilla61 said:
Doing a one click restore worries me, I'm not on sprint any more and worried about losing my flash to my current carrier. Is this a concern I should have since I'm not used to working with odin? I'm more than willing to try another ROM also, I'm not locked into this by any means.....
Click to expand...
Click to collapse
The carrier should not matter if you are on an E4GT phone. But if your trying to go to a JB ROM, you will need to aupdate to GB** for your phone. For sprint it is GB27. Have you tried RWilco12's repository to see if your carrier is listed? Also QBKing77 has a lot of videos concerning this specific phone. How to flash specific ROMs and upgrading specific build, modems and such. Something has got to work for you.
fitting toryBB
bigmike6200 said:
The carrier should not matter if you are on an E4GT phone. But if your trying to go to a JB ROM, you will need to aupdate to GB** for your phone. For sprint it is GB27. Have you tried RWilco12's repository to see if your carrier is listed? Also QBKing77 has a lot of videos concerning this specific phone. How to flash specific ROMs and upgrading specific build, modems and such. Something has got to work for you.
Click to expand...
Click to collapse
Well now I'm stuck on Sprints 4G boot screen just keeps looping.....WTH.....I've never had a phone be a pain like this....guess I let it kill the battery and see what happens. Recovery is there, not cwm so can't even restore my backup. I'm just frustrated by this phone! Gill, bigmike any idea which way to turn now?
godzilla61 said:
Well now I'm stuck on Sprints 4G boot screen just keeps looping.....WTH.....I've never had a phone be a pain like this....guess I let it kill the battery and see what happens. Recovery is there, not cwm so can't even restore my backup. I'm just frustrated by this phone! Gill, bigmike any idea which way to turn now?
Click to expand...
Click to collapse
What ROM did you flash? Was it ICS or Jellybean? What carrier are you on. That was never revealed.
Never kill the battery. I sed you tried" Wild for the night" and Pac something. Can you get to recovery?
X'ed out the game
Ok, I will start from the beginning of this debauchery.
I recently moved to a new state (Tennessee to be exact). I had 4 bars, and had great phone reception. Incoming and outgoing calls with absolutely no problems, but the web wouldn't load at all.
I am about 1 hour away from another time-zone and my phone kept changing its time, which caused my alarm to not go off and I have been late for work 4 times in the past 2 weeks because of this. This was the main reason I updated my PRL, as I thought it might fix this issue.
So, after updating it, I now have absolutely no signal. I might get a smidge of signal after walking around the house for 10 minutes, only to receive texts and maybe a voicemail if I am lucky. (I would call Boost, but I have no phone to use since this happened)
I am a total noob when it comes to android, this is my first android so please explain like I am five years old.
The phone is rooted, but only because I found a pretty easy to follow step-by-step guide.
Any help is greatly appreciated, thank you for your time.
irSteve said:
Ok, I will start from the beginning of this debauchery.
I recently moved to a new state (Tennessee to be exact). I had 4 bars, and had great phone reception. Incoming and outgoing calls with absolutely no problems, but the web wouldn't load at all.
I am about 1 hour away from another time-zone and my phone kept changing its time, which caused my alarm to not go off and I have been late for work 4 times in the past 2 weeks because of this. This was the main reason I updated my PRL, as I thought it might fix this issue.
So, after updating it, I now have absolutely no signal. I might get a smidge of signal after walking around the house for 10 minutes, only to receive texts and maybe a voicemail if I am lucky. (I would call Boost, but I have no phone to use since this happened)
I am a total noob when it comes to android, this is my first android so please explain like I am five years old.
The phone is rooted, but only because I found a pretty easy to follow step-by-step guide.
Any help is greatly appreciated, thank you for your time.
Click to expand...
Click to collapse
Need some more info.. is it on a stock ROM, do you have a custom recovery ( if so, what is it) and what modem is installed..Go to setting about phone and take a screen shot and put it up or type the info in here.. I'll do what I can to help..If the mods move this thread and you can't get help in the Q & A section..You can pm me..
Gil81 said:
Need some more info.. is it on a stock ROM, do you have a custom recovery ( if so, what is it) and what modem is installed..Go to setting about phone and take a screen shot and put it up or type the info in here.. I'll do what I can to help..If the mods move this thread and you can't get help in the Q & A section..You can pm me..
Click to expand...
Click to collapse
Sorry for the late reply, I have been pretty busy with the move.
My phone is Fi22, and I am using this kernel-
http://forum.xda-developers.com/showthread.php?t=1767421
and I don't remember installing any custom ROM (Mainly because I couldn't find any that interested me that were compatible)
I do have a recovery (clockworkmod) but the last backup is to basically factory settings. And I don't want to do that unless absolutely necessary, and I have a feeling it might not fix the issue even if I do this.
I called Boost from work, and sat on the phone for 2 hours. They had me do ##72786#. Then they told me to drive around my house until I found a spot with full bars and then update the PRL and profile and it would "drag" the signal to my house.
So I did this, and the closest place was about a mile and a half to two miles out.
Sadly, this didn't fix it.
I am still about 3 months away from my deductible on the insurance that I pay, so breaking the phone and getting a new free one is not possible.
irSteve said:
Sorry for the late reply, I have been pretty busy with the move.
My phone is Fi22, and I am using this kernel-
http://forum.xda-developers.com/showthread.php?t=1767421
and I don't remember installing any custom ROM (Mainly because I couldn't find any that interested me that were compatible)
I do have a recovery (clockworkmod) but the last backup is to basically factory settings. And I don't want to do that unless absolutely necessary.
I called Boost from work, and sat on the phone for 2 hours. They had me do ##72786# and do all that mumbo jumbo. Then they told me to drive around my house until I found a spot with full bars and then update the PRL and profile and it would "drag" the signal to my house.
So I did this, and the closest place was about a mile and a half to two miles out.
Sadly, this didn't fix it.
I am still about 3 months away from my deductible on the insurance that I pay, so breaking the phone and getting a new free one is not possible.
Click to expand...
Click to collapse
OK..from the link you gave..( a kernel update page )..I'm assuming you are on stock touch wiz with a custom kernel and cwm/agats recovery..good. Now I believe from what I read the kernel is based on modem fi27.That is a pretty new modem, the newest for ICS is fl24.. If I was you I would grab the fi27 and fl24 modems from rwilcos repository ( in zip format ) and flash one or the other, update you're PRL and profile and see which gives the best signal..This is not a direct science, you may have to try many different modems to find what works best in this new area..just be sure they are ICS modems..or you will not have data..If you need advice on how to flash a modem you can hit me back up..But its simple and there are a ton of guides around,as well as a guide in rwilcos repository page. Here is a link to the repo.. http://forum.xda-developers.com/showthread.php?t=1764210 ...just scroll down to ICS modems (zip) and click on it..It will take you to a page with the downloads....Hope this was helpful. And don't forget to thank rwilco.. He does amazing things for this phone and forum..Good Luck
Gil81 said:
OK..from the link you gave..( a kernel update page )..I'm assuming you are on stock touch wiz with a custom kernel and cwm/agats recovery..good. Now I believe from what I read the kernel is based on modem fi27.That is a pretty new modem, the newest for ICS is fl24.. If I was you I would grab the fi27 and fl24 modems from rwilcos repository ( in zip format ) and flash one or the other, update you're PRL and profile and see which gives the best signal..This is not a direct science, you may have to try many different modems to find what works best in this new area..just be sure they are ICS modems..or you will not have data..If you need advice on how to flash a modem you can hit me back up..But its simple and there are a ton of guides around,as well as a guide in rwilcos repository page. Here is a link to the repo.. http://forum.xda-developers.com/showthread.php?t=1764210 ...just scroll down to ICS modems (zip) and click on it..It will take you to a page with the downloads....Hope this was helpful. And don't forget to thank rwilco.. He does amazing things for this phone and forum..Good Luck
Click to expand...
Click to collapse
Thank you very much, I will try this immediately and post my results.
Gil81 said:
OK..from the link you gave..( a kernel update page )..I'm assuming you are on stock touch wiz with a custom kernel and cwm/agats recovery..good. Now I believe from what I read the kernel is based on modem fi27.That is a pretty new modem, the newest for ICS is fl24.. If I was you I would grab the fi27 and fl24 modems from rwilcos repository ( in zip format ) and flash one or the other, update you're PRL and profile and see which gives the best signal..This is not a direct science, you may have to try many different modems to find what works best in this new area..just be sure they are ICS modems..or you will not have data..If you need advice on how to flash a modem you can hit me back up..But its simple and there are a ton of guides around,as well as a guide in rwilcos repository page. Here is a link to the repo.. http://forum.xda-developers.com/showthread.php?t=1764210 ...just scroll down to ICS modems (zip) and click on it..It will take you to a page with the downloads....Hope this was helpful. And don't forget to thank rwilco.. He does amazing things for this phone and forum..Good Luck
Click to expand...
Click to collapse
After flashing to Fi27, FL24, Fi25, Fi03, and FH23 nothing has changed (Fi25 and FH23 wouldn't even boot). I even tried clearing the data and updating PRL/profile.
Sadly, I am stuck with 1 bar in a 1'x1' area in my home.
irSteve said:
After flashing to Fi27, FL24, Fi25, Fi03, and FH23 nothing has changed (Fi25 and FH23 wouldn't even boot). I even tried clearing the data and updating PRL/profile.
Sadly, I am stuck with 1 bar in a 1'x1' area in my home.
Click to expand...
Click to collapse
Well..you didn't need to clear the data..Just clear cache and dalvik cache( under advanced ). Then reboot and update prl and profile.. This order for each modem you flash. But if you did this and still no service I'm afraid it is probably a location problem. You might look into putting a custom prl in..this will allow you to roam on different carriers. I have never tried it as I have good service in the windy city.But there are quite a few threads about it..seems always sprint people doing it. By the way..if you're on boost..I thought I seen that you are... You could try a boost modem..not sure how it would mesh with custom kernel..couldn't hurt though to try. Let me know. I'll dig around and see if I can come up with anything else.
Gil81 said:
Well..you didn't need to clear the data..Just clear cache and dalvik cache( under advanced ). Then reboot and update prl and profile.. This order for each modem you flash. But if you did this and still no service I'm afraid it is probably a location problem. You might look into putting a custom prl in..this will allow you to roam on different carriers. I have never tried it as I have good service in the windy city.But there are quite a few threads about it..seems always sprint people doing it. By the way..if you're on boost..I thought I seen that you are... You could try a boost modem..not sure how it would mesh with custom kernel..couldn't hurt though to try. Let me know. I'll dig around and see if I can come up with anything else.
Click to expand...
Click to collapse
I did wipe the cache and dalvik. I will look into custom PRL's tomorrow I guess.
irSteve said:
After flashing to Fi27, FL24, Fi25, Fi03, and FH23 nothing has changed (Fi25 and FH23 wouldn't even boot).
Sadly, I am stuck with 1 bar in a 1'x1' area in my home.
Click to expand...
Click to collapse
Think I might of found something..read through it. Looks promising. I would think it would work for our boost phones since we really are sprint customers.. http://www.sprintusers.com/forum/showthread.php?t=231596 ...also check to see what you're roaming settings are set for in your phone. I have mine set to roam when ever..unlimited plan and I plan on holding them to it..lol
---------- Post added at 02:58 AM ---------- Previous post was at 02:41 AM ----------
irSteve said:
I did wipe the cache and dalvik. I will look into custom PRL's tomorrow I guess.
Click to expand...
Click to collapse
I just re-read you're op to see if I missed any info..I see that the web wouldn't load ..you know it might be that kernel...if I was you I would flash a stock kernel with Mobil Odin lite ( apk in xda somewhere, just search it ) You need the kernel to be in TAR Format for mobile Odin...Make sure its for boost and not sprint.. I believe this is where we messed up. You see. When you flashed that kernel before it was fine, but when you did the update it gave you a sprint prl. Now you have a sprint prl on stock boost ROM and a custom kernel built for a stock sprint ROM..See where I'm going with this.. Actually..if I was you I would down load a touch wiz ROM from the android development thread..make sure its ICS because you're not set up yet for jb..the blue Kuban ICS is awesome..follow the op in that thread to flash..I use Mobil Odin and the direct boot el29 kernel to flash Roms. If you want to go this route hit me back and I will post a step by step guide for you..
---------- Post added at 03:30 AM ---------- Previous post was at 02:58 AM ----------
. THIS IS FOR THE BLUE KUBAN ICS FL24
step one - download ROM , format all x 2 , fl24 modem , direct boot el29 kernel ..... Place on internel storage/root of sdcard
two. - install mobile Odin( lite or paid version ) lite version can be found http://forum.xda-developers.com/showthread.php?t=1347899
three. - use mobile Odin to flash direct boot kernel. It will boot to recovery on its own.
four. - push volume up , volume down , volume up ....this will enable the power button to select you're choices.
five. - wipe data , wipe cache , wipe dalvik cache
six. - flash format all x 2 zip
seven. - flash ROM..reboot..( el29 will not flash modems ) so flash it before hand or after the Kuban boots up..
.... You will need to flash a MMS fix zip for boost to get you MMS working after this or go into apn 's and change them manually..I can tell you how if you decide on this route..
Gil81 said:
[/COLOR]
. THIS IS FOR THE BLUE KUBAN ICS FL24
step one - download ROM , format all x 2 , fl24 modem , direct boot el29 kernel ..... Place on internel storage/root of sdcard
two. - install mobile Odin( lite or paid version ) lite version can be found http://forum.xda-developers.com/showthread.php?t=1347899
three. - use mobile Odin to flash direct boot kernel. It will boot to recovery on its own.
four. - push volume up , volume down , volume up ....this will enable the power button to select you're choices.
five. - wipe data , wipe cache , wipe dalvik cache
six. - flash format all x 2 zip
seven. - flash ROM..reboot..( el29 will not flash modems ) so flash it before hand or after the Kuban boots up..
.... You will need to flash a MMS fix zip for boost to get you MMS working after this or go into apn 's and change them manually..I can tell you how if you decide on this route..
Click to expand...
Click to collapse
I am going to try this, but I cant seem to find the kernel. I found GB - Direct Boot CWM, but not ICS. Is that the one I'm looking for?
irSteve said:
I am going to try this, but I cant seem to find the kernel. I found GB - Direct Boot CWM, but not ICS. Is that the one I'm looking for?
Click to expand...
Click to collapse
I'm sorry...yes it is a gingerbread kernel..We couldn't flash from ICS back in the day, unless its a safe version like what you have now.. The emmc brick bug will brick you're device..So they made the el29 and el26 kernels for flashing. Most new kernels for ICS are safe now,unless specified in that kernels thread. And like I said..flash the modem now because el 29 will not flash modems. Let the ROM boot and chill for awhile before you flash anything else(if you decide too)..you can update you're prl as soon as the ROM boots.. If this doesn't get you home I'm afraid a custom prl is the next step..Sorry I couldn't be more helpful.. Let me know how it goes..
Gil81 said:
I'm sorry...yes it is a gingerbread kernel..We couldn't flash from ICS back in the day, unless its a safe version like what you have now.. The emmc brick bug will brick you're device..So they made the el29 and el26 kernels for flashing. Most new kernels for ICS are safe now,unless specified in that kernels thread. And like I said..flash the modem now because el 29 will not flash modems. Let the ROM boot and chill for awhile before you flash anything else(if you decide too)..you can update you're prl as soon as the ROM boots.. If this doesn't get you home I'm afraid a custom prl is the next step..Sorry I couldn't be more helpful.. Let me know how it goes..
Click to expand...
Click to collapse
I went ahead and did everything that you said, and sadly it hasn't changed a thing.
I'm currently on PRL version 31104, which I believe is the most recent but I cant find any lists or information regarding boost PRL.
How do I fix my MMS?
irSteve said:
I went ahead and did everything that you said, and sadly it hasn't changed a thing.
I'm currently on PRL version 31104, which I believe is the most recent but I cant find any lists or information regarding boost PRL.
How do I fix my MMS?
Click to expand...
Click to collapse
I'm up loading a zip to my drop box..will post the link and directions shortly..Sorry about you're signal..wish I had more info.
irSteve said:
I went ahead and did everything that you said, and sadly it hasn't changed a thing.
I'm currently on PRL version 31104, which I believe is the most recent but I cant find any lists or information regarding boost PRL.
How do I fix my MMS?
Click to expand...
Click to collapse
Can't find the zip..must be on home computer..I'm at work..,but
You can use the msl way, which involves a terminal emulator and the dialer code ##data# or you can use an APN shortcut app from play store or even Nova launcher.I use nova launcher because its the launcher I use anyway.. Long press the screen and pick shortcuts then activities. Scroll to settings any pick it. Then scroll down to APN..pick it. Back at home screen pick new shortcut..when APN screen pops up hit menu and pick add new APN. Then put in what I have in screen shots..save APN pick the circle beside new APN so its lit up and exit.send one to you're self to jump start it and make sure its working..Let me know if you have trouble.. I'm about to leave work and can give you a better guide in an hour,if you can't find anything else online..might need to do a reboot for it to work.
Gil81 said:
Can't find the zip..must be on home computer..I'm at work..,but
You can use the msl way, which involves a terminal emulator and the dialer code ##data# or you can use an APN shortcut app from play store or even Nova launcher.I use nova launcher because its the launcher I use anyway.. Long press the screen and pick shortcuts then activities. Scroll to settings any pick it. Then scroll down to APN..pick it. Back at home screen pick new shortcut..when APN screen pops up hit menu and pick add new APN. Then put in what I have in screen shots..save APN pick the circle beside new APN so its lit up and exit.send one to you're self to jump start it and make sure its working..Let me know if you have trouble.. I'm about to leave work and can give you a better guide in an hour,if you can't find anything else online..might need to do a reboot for it to work.
Click to expand...
Click to collapse
Well, this didn't seem to work. But I'll try and find another guide online.
As a token of my appreciation, I have made this signature for you.
Thanks for all of the help :]
Let me know what size you are stretching it to and I'll fix it so it doesn't lose the quality.
irSteve said:
Well, this didn't seem to work. But I'll try and find another guide online.
As a token of my appreciation, I have made this signature for you.
Thanks for all of the help :]
Click to expand...
Click to collapse
Hey man...Thanks for the SIG.. I put it up,with a little side note to you for making it.. If you can't find a MMS fix let me know and I'll walk you through it..shouldn't be more than just changing you're mmsc url.. But this phone can have gremlin's sometimes....
irSteve said:
I went ahead and did everything that you said, and sadly it hasn't changed a thing.
I'm currently on PRL version 31104, which I believe is the most recent but I cant find any lists or information regarding boost PRL.
How do I fix my MMS?
Click to expand...
Click to collapse
OK I'm home..let's fix you're MMS..The zip I have is for asop roms, so nogo there and some ROMs won't let you edit apns in list..So I believe this is the way to go...First you need you're msl number..you can get it by typing '' su '' into a terminal emulator,no quotations. Then hit enter. Next type '' getprop ril.MSL '' just how it looks, no quotations. This should give you a 6 digit number. If it doesn't you can go the dialer and type ##data# then click edit and enter any 6 digit number. It will give you an error. This is OK. Now go back to terminal emulator and repeat above steps. If none of this works..call boost. They will eventually give it to you. After you get the msl..go back to you're dialer and put the code back in(##data#). Click edit and enter msl. Then scroll down and click on others. Then click mmsc url and click on the url.. Then edit it '' http://myboostmobile.com '' hit OK..and exit this screen. Now send one to yourself..should work..
Gil81 said:
OK I'm home..let's fix you're MMS..The zip I have is for asop roms, so nogo there and some ROMs won't let you edit apns in list..So I believe this is the way to go...First you need you're msl number..you can get it by typing '' su '' into a terminal emulator,no quotations. Then hit enter. Next type '' getprop ril.MSL '' just how it looks, no quotations. This should give you a 6 digit number. If it doesn't you can go the dialer and type ##data# then click edit and enter any 6 digit number. It will give you an error. This is OK. Now go back to terminal emulator and repeat above steps. If none of this works..call boost. They will eventually give it to you. After you get the msl..go back to you're dialer and put the code back in(##data#). Click edit and enter msl. Then scroll down and click on others. Then click mmsc url and click on the url.. Then edit it '' http://myboostmobile.com '' hit OK..and exit this screen. Now send one to yourself..should work..
Click to expand...
Click to collapse
Ok, so I did as you said but sending pics is just stuck on "Sending..."
irSteve said:
Ok, so I did as you said but sending pics is just stuck on "Sending..."
Click to expand...
Click to collapse
Reboot you're phone..also remember that this phone uses mobile data to send MMS..so with you're weak signal it might take awhile..you could use you're WiFi just to see if its working. And I think you will need to go into you're APN settings and pick the circle on the right of listed APN.It will probably say sprint but that doesn't matter. Then reboot..Sorry man, my brain is not working today. I should have told you that earlier.
Gil81 said:
Reboot you're phone..also remember that this phone uses mobile data to send MMS..so with you're weak signal it might take awhile..you could use you're WiFi just to see if its working. And I think you will need to go into you're APN settings and pick the circle on the right of listed APN.It will probably say sprint but that doesn't matter. Then reboot..Sorry man, my brain is not working today. I should have told you that earlier.
Click to expand...
Click to collapse
I actually did that, but what fixed this for me was that in the paragraph you wrote "http://myboostmobile.com" (which I used). In the picture, yours said "http://mm.myboostmobile.com" and switching to that seemed to fix it after I rebooted again. Ok, so atleast im back to square one now lol.
But I do have this nice rom now, and Nova is awesome.