I just got a htc touch pro2 (t.mobile)...actually it's used so when I booted it asked for password which I don't know and it has stock windows os 6.5........
So tell me guys how can I bypass the password....since the person from whom I got it has no idea of it...
You need to do a hard reset. This will wipe all the personal info also.
Press and hold the talk/hangup/power all at the same time with the phone is off.
Then follow the on screen directions.
http://www.youtube.com/watch?v=Ea2S4iA3H1k Starting at 2:25
Be sure that your battery is charged up just in case.
Related
i locked my dash and i thought i knew the code but i guess i dont because it wont work, wht should i do?
How did you lock your phone, with a device lock or SIM PIN? Are you prompted that you have 10 tries (SIM) or do you see "Unlock" over the left soft key when the device turns on? If the second, a hard reset will clear the password.
Procedure to make a HARD RESET
Hello,
Which is the procedure to make a Hard Reset to the phone HTC S620 ?
Thanks
Hi guys, I have a question, normally i killed my diamond, it doesn't tzrn on anymore, how i can get it back to life, i have experience so i do not know what went wrong
any help
hi
are you able to get into the bootloader? done via holding the volume button down and pressing the reset button?
Just for tech information.
If Im not able to get into bootloader, any solutions to restor it or reflash it?
megahenebi said:
Just for tech information.
If Im not able to get into bootloader, any solutions to restor it or reflash it?
Click to expand...
Click to collapse
If you can't do that, it's pretty much over. Prepare to ship the device back to HTC for warranty purposes. If they charge you more then your willing to pay for the repairs, tell them that they can keep it.
Who knows, they might fix it for free if warranty isn't void..
Hope this will work for you
do u have olipro hardspl already installed on you diamond...if u do, try holding the power button, volume down and hard reset button the same time...you can see the bootloader again and (you hv to quickly flashed it becaused it will only sync for few sec)quickly flashed a fresh copy of olipro hardspl and it will be back to life..now u can flashed your new rom as a you did before...i hv face the same problem power button not working, bootloader cannot sync with pc...my diamond is totaly dead.. i did send my diamond to HTC for repair..they ask me USD 320 the replace the motherboard..and at last i tried the solution found on xda and my diamond is back to life again...hope it will work for u to...gud luck
holding the power button, volume down and hard reset button the same time...you can see the bootloader again and (you hv to quickly flashed it becaused it will only sync for few sec)quickly flashed a fresh copy of olipro hardspl and it will be back to life..now u can flashed your new rom as a you did before
Click to expand...
Click to collapse
Would love to see this work for him and others in this spot.
Good Luck...
Unfortunately nothing happened, i have full battery but diamond does nothing, dead. how can it be that a flashing caused to kill device that it will never turn on???, i would know what to do if it can turn on, but now is a question HOW to turn it on?
dubravk0 said:
Unfortunately nothing happened, i have full battery but diamond does nothing, dead. how can it be that a flashing caused to kill device that it will never turn on???, i would know what to do if it can turn on, but now is a question HOW to turn it on?
Click to expand...
Click to collapse
Dear dubrak0 would u spare us a bit more detail on how did you bricked your diamond..wat did you flash to get your diamond bricked and wat happened if you connect your diamond to your pc as you mentioned earlier in the post you cannot enter bootloader..and yes bad flashing can caused you to kill your device and it will never turn on...
As for me, i flash a rom doing all the normal steps but i dont know what went wrong just after the flashing my device cannot be turn on..i tried to enter the bootloader by pressing volume down and reset button but the bootloader stay only for 2 sec and cannot sync with my pc..when i try to charge the bootloader keep poping up a few sec and repeat it self and it wont charge the phone....nothing is workin all the button dead accept for the repeating bootloader and the device cannot sync with pc for flashing...then only i sent my diamond to htc as i mentioned earlier..
The solution is a bit tricky actually...you hv to press and hold the power and volume down button the same time then press the reset button and lift but still holding the 2 button for few more sec till the bootloader appear.. when the bootloader appear it will sync to your pc and stay there few more sec a bit longer then before...therefore u must quickly flash the new hardspl again...if you succeed with that then only it will be back to life...
If you say that your device is dead as in nothing happens even if u connect it to your pc then nothing can be done...if your device is still under warranty then send it to htc as they informed me that if they could not detect any third party hardspl installed (which is in your case the device is totally dead and no chance to even check wats installed on the device) they`ll fix it for u without any charged..but if u hv your warranty expire then to bad..your device is totally unuseable unless u pay usd 320 for the board replacement or do jtag..
if you have hardspl then you cannot kill it from a rom flash, so im assuming you didnt!
Folks i bought an incite off of ebay and it came with wm6.1 played with it for a couple of days and was happy. i then went ahead and upgraded it to 6.5 from spocky and was not very happy as it was causing problems when the g-alarm was trying to wake up in lock mode so i decided to go backwards.
i downloaded the 10xi rom and tried to install it back to the phone... not sure what happened but my xp-sp3 rebooted in the middle of the upgrade with a blue screen of death.
and now i think i bricked it...
phone was 100% charged before the excercise... and now it wont respond to the hard-reset (vols down + camera+ power on) and wont respond to the emergency download (vol down+lock+usb connection)
any suggestions how to try revive this
Same Problem
Same problem...I had not messed with WM but was just trying to upgrade the ROM to v10. I got the BSOD at about 25% completed. BSOD indicated problem with LG usb driver. I was able to restart the upgrade after computer reboot - same thing happened again. Now screen on phone is dark and nothing will respond. I still have a little time before I have to decide to send this thing back. I would like to keep it - any ideas.
rc said:
Folks i bought an incite off of ebay and it came with wm6.1 played with it for a couple of days and was happy. i then went ahead and upgraded it to 6.5 from spocky and was not very happy as it was causing problems when the g-alarm was trying to wake up in lock mode so i decided to go backwards.
i downloaded the 10xi rom and tried to install it back to the phone... not sure what happened but my xp-sp3 rebooted in the middle of the upgrade with a blue screen of death.
and now i think i bricked it...
phone was 100% charged before the excercise... and now it wont respond to the hard-reset (vols down + camera+ power on) and wont respond to the emergency download (vol down+lock+usb connection)
any suggestions how to try revive this
Click to expand...
Click to collapse
You were probably still OK.
Did you get it working? It's been 2 weeks...
Hi, i need know how to do a hard reset, because i put a password, but i forgot it, can you help me???
I can enter in download mode (hold-green-red) but no in emergency mode(v down-hold-red) :-(
i can see Owner: my name and a key pad to put the password, no more, i cant enter to emergency mode :-( when u pushh and hold the vdown-camera-power on, the phone power on :-(
Help me pleaseee
thank you
Hi Guyz, Just bought a Touch HD and 1st thing i did was configure a 4 digit password. Since i live in china and Chinese for texting, i went on to try to install a old version of CE-Star (wm2003) on it, installation went fine, finally was prompted to do soft-reset, i did so, and then things went haywire, after coming out of reset the device diasplayed the initial password screen came up, realized that i cannot type in screen (totally un-responsive) and nor clicking on below 4 hardware butons causes any effect. I cannot enter into my device and hence cant do anything, stuck. Both Soft-reset nor even the Hard-reset surprisingly does not work (at wits end to get out of this dilemma, pls help). Pls help to resolve. Thanks.
if hard reset didn't work i think that this means that you have a faulty touch screen!
but i think you have not done Hard reset right,
do the following,
turn off the device
hold down vol up & vol down
press and release (only single click) the power button and wait for the instructions on the screen.
follow the instructions on screen untill the phone reboots.
i hope this will help
I have a Stock TILT 2 (TP 2) never flashed running basic programs Mobile Shell never had any issues with it, haven't installed new software in a few weeks , but I soft resetted it this morning and it keeps getting stuck in the boot screen. when first turned on it will run through boot screen then load screen for a millisecond then back to boot screen and never advances again , I've tried battery out sim card out Sd card out everything, even tried hard reset , but wont allow me to hard reset with front buttons and power, is there another way to hard reset , is it possible my phone just bricked for no reason ? thanks for any help ?
have you tried to do a hard reset via the pc? the original rom is on the htc website so you can try useing the exe file there. there is also an updated rom you can try to flash there. hope that helps
You might try sending it to the bootloader screen and reflashing. I don't know if it will work, but I thought it might be worth the effort.
I did notice that HTC removed the original shipped ROM for the Tilt2. I'm sure it is floating around here somewhere. If not, I have it and can send it to you when I get home.
Thanks I have original rom and just released wont work.
dod you see anythign on teh screen? if you do, then hard reset may fix it.
Power off your phone (or take teh battery out). Then press and hold teh call and hang up button while press teh power button. it will enter the hard reset mode. (remember hard reset will erase all the info on the phone and rever tot the stock setting).
jcterry said:
I did notice that HTC removed the original shipped ROM for the Tilt2.
Click to expand...
Click to collapse
wow, thank god i dl'd it when i dl'd the updated rom... and they still have the image of the old rom right beside it... lol
as for op, you can try to enter the bootloader with the following steps
Remove the back cover from the phone.
Hold the Volume Down button.
Use the stylus to press the reset hole.
Or if the device was powered off, press the power button whilst holding down the Volume Down button.
and try to flash from there
hope that helps again