Develop Bugs

My Qtek 9000 died after upgrade

Hi to all. After that i have upgraded my Qtek 9000 Vodafone with NoID software, at 99% the device it is blocked. No Boot Display. No Lamp.
I can to solve the problem? How i can enter in boot loader mode forced?
Pse help me!
Thanks.

Power + Light + Reset

rikram said:
Power + Light + Reset
Click to expand...
Click to collapse
Died.
Boot rom is cancelled from PDA?
There is a another mode ?

Help Me!
Help me!
Another Idea?

Power+light+reset = bootloader mode as already posted. It does not light up though, you can only see the bootloader screen if you look at it in bright sunlight or shine a light at it. Try charging it overnight the press power+light+reset, connect it to your PC then run the upgrade. If it really isn't going into bootloader mode then you will probably need to send it off for repair to vodafone.

i just had exactly the same problem, even the pc does not recognize it at all, activesync doent work, what to do please

lion2000 said:
i just had exactly the same problem, even the pc does not recognize it at all, activesync doent work, what to do please
Click to expand...
Click to collapse
I do not have hopes. There is not image on display. I have tried with power+reset+lamp hard reset - + - + Reset!!! Power+ camera + Reset!!!
Display black and nobody written of the boot loader.
Useless if the boot loader it is cancelled is not restorable. Unfortunately it goes in repair.

i have the same problem with my MDA PRO. my MDA PRO also does not show bootloader screen. even not is charging by its charger. i just wanted to upgrede it with AKU and after i upgraded it, it did not open even bootloader screen did not appear.

fuhayer said:
i have the same problem with my MDA PRO. my MDA PRO also does not show bootloader screen. even not is charging by its charger. i just wanted to upgrede it with AKU and after i upgraded it, it did not open even bootloader screen did not appear.
Click to expand...
Click to collapse
I have not solved. I sent device to assistance.

mne now shows the boot screen, it comes with some funny colours, but it stays there, whe i ckicj sof+soft:reset it comes with screen
press o to restorefactory default
press x to exec
when i press 0 it goes back to that funny colourd screen, dont no what to do
any help?

what is soft+soft ? how did you get boot screen ? which phone are you using ?

How it can happen? If device worked before u start upgrading maybe u battery is low. Try to charge it somehow even not fully and continue upgrading via bootloader screen.

yes, universal. good news, i got it back to life, it now an i mate, can't change it, but it works.
i tried many rom version that i downloaded from buzzdev and one clicked.
most came with country id wrong etc
how can i gdt it back to O2? it does not accept it anymore?

tabasco said:
How it can happen? If device worked before u start upgrading maybe u battery is low. Try to charge it somehow even not fully and continue upgrading via bootloader screen.
Click to expand...
Click to collapse
Shalom tabasco, well not really, i had it like that for a week, i evenhad it on charge for almost 3 days, the screen came at one point when i upgraded a rom, but the screen had a funy colour and it was stuck in bootloader, done all reset you can imagin, i even rand O2 to collect it for repair

seems to me that I created a problem for myself too. Can't escape bootloader mode. This 3 stages runs fine, but after final 100% CE screen, when I doing hard reset, writes "Clearing now" and goes back to bootloader screen :roll: How to make him alive? I even did short on backup battery (opened back cover), but nothing effective
ok ok i pressed several times buttons which activates bootloader and it comes to normal activity. Was it a joke or something else ?

Good for you

Did u try to do as given here? http://wiki.xda-developers.com/index.php?pagename=Instructions for those stuck on Boot Screen - do all this, maybe it will solve. Be ezrat ashem
But anyway I'll going to make him swallow this new ROM from T-Mobile, but later, not at work... :wink:

hi,
did you solve your problem yet ?

Please help - My Excalibur won't boot up.

Dash Bricked Need Help!!!
I tried using a the google mail java app on my tmobile dash. It froze up on me, and when i turned it back on it just stays at the "tmobile" splash screen. I have tried using the soft key and power button reset but it doesnt work. What's weird is that it wont power down unless I take the battery out. It powers on, shows the tmobile splash screen, then freezes. Is there any other way to reset it or is it totally bricked? I bought it new off craiglslist so tmobile wont replace it for me cause I'm using it unlocked on cingular.

The power key reset should work. Could you be doing it wrong?

I was facing the same problem but after doing hard reset (Power Off, Press 2 soft key, Press Power On Key for 2 seconds then release soft key) worked fine. Seems timing is very important, try and try.

Help, i think i bricked my phone!
I was installing the WM6 Update released on this website, everything was going fine when i saw that my lil' cousin' disconnected my phone while i moved away from the PC (he pulled the phone altogether).
Now my phone is stuck in the bootloader mode screen (tricolor, blue green/red i think). It detects USB (it says USB on the bottom of the screen whenever i connect it). Is there a fix for it for the DASH? I read the wiki about a fix for a similar problem for the Hermes, but that didnt work for mine.
Can anybody help me please?!
Mine's a T-Mobile Dash with the stock rom from T-Mobile.

remove and reinsert the battery

if that does not work paperweight thats how i ruined my cingular 2125

Oh god, all this brickage makes me too scared to update. Can anyone direct me to where I can find how to backup my current setup so that I could reload it if something went wrong or I didnt like the Beta WM6?

MrLuna said:
I was installing the WM6 Update released on this website, everything was going fine when i saw that my lil' cousin' disconnected my phone while i moved away from the PC (he pulled the phone altogether).
Now my phone is stuck in the bootloader mode screen (tricolor, blue green/red i think). It detects USB (it says USB on the bottom of the screen whenever i connect it). Is there a fix for it for the DASH? I read the wiki about a fix for a similar problem for the Hermes, but that didnt work for mine.
Can anybody help me please?!
Mine's a T-Mobile Dash with the stock rom from T-Mobile.
Click to expand...
Click to collapse
Just try the flash again and it should start working. I had my computer bluescreen while I was flashing an SDA and got to the tricolor screen. It flashed fine after trying again. If its not detecting right. Pop out the battery on the phone and restart your computer and attempt the flash again. Shouldn't be a problem. Definitely scary though. I don't think you can brick these unless you mess up the bootloader perhaps...

ANyone know How do I manually put my Dash in Bootloader mode?

deemota said:
ANyone know How do I manually put my Dash in Bootloader mode?
Click to expand...
Click to collapse
power off, hold the camera key beside Space Tab for about 3 sec, and then press power key while still pressing the cam key.

You are a GOD. Thanks.

you have no idea why it gives you warnings not to run any programs or disconnect while the ruu is updating you think they just give you warning messages because the htc techs have nothing better to do????????

Blackforge said:
Just try the flash again and it should start working. I had my computer bluescreen while I was flashing an SDA and got to the tricolor screen. It flashed fine after trying again. If its not detecting right. Pop out the battery on the phone and restart your computer and attempt the flash again. Shouldn't be a problem. Definitely scary though. I don't think you can brick these unless you mess up the bootloader perhaps...
Click to expand...
Click to collapse
Well, tried that, but the computer doesnt detect the phone, meaning it wont connect to ActiveSync. Since it won't connect to activesync the program wont install it on the phone since it can't find it.
Good thing i have insurance. Bad thing i'm trying again as soon as i get the replacement
Are there any alternatives though? Maybe i can fix it before i send this one back.

restart your computer again..

This is from HTC Q&A
Q: I use RUU to update and failed, and my device always boots in three-color mode and cannot enter CE OS anymore, what should I do now?
A: If the update process has failed, you will see that your device will always boot in three-color mode. It's normal and can be recovered. Please follow the instructions below to reset your device and to establish a connection with the computer.
1. Disconnect your Mobile Device from the USB cradle/cable.
2. Reset your Mobile Device.
3. Reconnect your Mobile Device to the USB cradle/cable.
4. Check that the communication cradle/cable is connected properly.
5. Return to the ROM Update Utility.
Note: You should ignore the ActiveSync connection.

WM6: Endless Bootup Loop
A few days before the official TMobile WM6 update came out I download the widely posted leaked version. The Dash started acting up during bootup one day, so I reflashed with the TMobile WM6. Now the same thing just started, and the device can't be used.
When powered on it does the quick vibrate, TMobile screen, Windows Mobile Screen, TMobile screen again, with power up 'jingle', then it just shuts off and starts the bootup sequence again. Endlessly.
Have tried removing the battery, etc. Has anyone else run into this? Any ideas of a keypress combo or something I can press during bootup that might jump-start it??? Thanks!

Take out the microSD card and the unit should boot properly. Mine was fixed with a new SIM card, but a new device may also be needed.

Wound up doing a hard reset. I had tried taking out the microSD card, then it would just hang on the TMobile screen. I also tried rebooting without the SIM card in, then it would do the loop thing. I'm thinking it must be related to software loading during the boot, and the only program I have on the microSD card that loads during bootup is FizzWeather.
rabilancia said:
Take out the microSD card and the unit should boot properly. Mine was fixed with a new SIM card, but a new device may also be needed.
Click to expand...
Click to collapse

I think this may at times be related to an auto-install file being present.
If you hold down the "end" key during boot-up it seems to prevent the cycling.

Thanks, will keep that in mind if it happens again. By 'end' key, do you mean the red phone icon key that you hang up on a call with?
robertgbl said:
I think this may at times be related to an auto-install file being present.
If you hold down the "end" key during boot-up it seems to prevent the cycling.
Click to expand...
Click to collapse

unknown problem

dear friends ,
my phone has shut down and only when you take out the battery and put it back in after which you press any button on the phone it comes on and shows the htc logo after which it displays the following
ipl 3.07.001
spl 3.07.000
gsm 02.69.90
os 3.7.0.0
remains on for about 5-6 seconds and goes off
have tried to enter the boot loader mode by pressing the record button and reset button but it continous to behave in the same manner as mentioned above .
also when i try to charge the phone it shows only a red light
hoping someone can offer a solution to my problem
thanks and regards

I'd also be interested to know about this as my MDA Compact III has just done exactly the same thing.

have you guys tried flashing...that could kill it if not done propertly....but i doubt,the led is on,splash screen appears...info appears...what were last few things you did
according to spl os and ipl you flashed artemis touch 4.02 if i'm not wrong...or maybe tom's v5...try reflashing the same rom or just try a hardreset

Interesting...I've recently flashed the same ROM (v4.02)
I am certain I followed all the instructions about USPL and its been working fine for about a week...then it just went blank!
Will try re-flashing and/or a hard reset.
Thanks for the advice.

mrd5477 said:
Interesting...I've recently flashed the same ROM (v4.02)
I am certain I followed all the instructions about USPL and its been working fine for about a week...then it just went blank!
Will try re-flashing and/or a hard reset.
Thanks for the advice.
Click to expand...
Click to collapse
well...if it worked i'm sure you installed some app or deleted some files...so the system doesn't work...
if so hr will help

dear friends,
took the device in for repairs the fault was with the power circuit board which had to be changed as`informed to me by the technician
i now remember a few months ago the power button stopped working and a few days before the phone went bad it would work intermittently but there was no spring in the button hence it would have to be pressed quite hard for it to work i feel that this loose power button caused the power circuit to fail also my sd card was spoilt and the same had to be replaced
cast me appx in usd 30 for the repairs
thanks

Bricked diamond

Hi guys, I have a question, normally i killed my diamond, it doesn't tzrn on anymore, how i can get it back to life, i have experience so i do not know what went wrong
any help

hi
are you able to get into the bootloader? done via holding the volume button down and pressing the reset button?

Just for tech information.
If Im not able to get into bootloader, any solutions to restor it or reflash it?

megahenebi said:
Just for tech information.
If Im not able to get into bootloader, any solutions to restor it or reflash it?
Click to expand...
Click to collapse
If you can't do that, it's pretty much over. Prepare to ship the device back to HTC for warranty purposes. If they charge you more then your willing to pay for the repairs, tell them that they can keep it.
Who knows, they might fix it for free if warranty isn't void..

Hope this will work for you
do u have olipro hardspl already installed on you diamond...if u do, try holding the power button, volume down and hard reset button the same time...you can see the bootloader again and (you hv to quickly flashed it becaused it will only sync for few sec)quickly flashed a fresh copy of olipro hardspl and it will be back to life..now u can flashed your new rom as a you did before...i hv face the same problem power button not working, bootloader cannot sync with pc...my diamond is totaly dead.. i did send my diamond to HTC for repair..they ask me USD 320 the replace the motherboard..and at last i tried the solution found on xda and my diamond is back to life again...hope it will work for u to...gud luck

holding the power button, volume down and hard reset button the same time...you can see the bootloader again and (you hv to quickly flashed it becaused it will only sync for few sec)quickly flashed a fresh copy of olipro hardspl and it will be back to life..now u can flashed your new rom as a you did before
Click to expand...
Click to collapse
Would love to see this work for him and others in this spot.
Good Luck...

Unfortunately nothing happened, i have full battery but diamond does nothing, dead. how can it be that a flashing caused to kill device that it will never turn on???, i would know what to do if it can turn on, but now is a question HOW to turn it on?

dubravk0 said:
Unfortunately nothing happened, i have full battery but diamond does nothing, dead. how can it be that a flashing caused to kill device that it will never turn on???, i would know what to do if it can turn on, but now is a question HOW to turn it on?
Click to expand...
Click to collapse
Dear dubrak0 would u spare us a bit more detail on how did you bricked your diamond..wat did you flash to get your diamond bricked and wat happened if you connect your diamond to your pc as you mentioned earlier in the post you cannot enter bootloader..and yes bad flashing can caused you to kill your device and it will never turn on...
As for me, i flash a rom doing all the normal steps but i dont know what went wrong just after the flashing my device cannot be turn on..i tried to enter the bootloader by pressing volume down and reset button but the bootloader stay only for 2 sec and cannot sync with my pc..when i try to charge the bootloader keep poping up a few sec and repeat it self and it wont charge the phone....nothing is workin all the button dead accept for the repeating bootloader and the device cannot sync with pc for flashing...then only i sent my diamond to htc as i mentioned earlier..
The solution is a bit tricky actually...you hv to press and hold the power and volume down button the same time then press the reset button and lift but still holding the 2 button for few more sec till the bootloader appear.. when the bootloader appear it will sync to your pc and stay there few more sec a bit longer then before...therefore u must quickly flash the new hardspl again...if you succeed with that then only it will be back to life...
If you say that your device is dead as in nothing happens even if u connect it to your pc then nothing can be done...if your device is still under warranty then send it to htc as they informed me that if they could not detect any third party hardspl installed (which is in your case the device is totally dead and no chance to even check wats installed on the device) they`ll fix it for u without any charged..but if u hv your warranty expire then to bad..your device is totally unuseable unless u pay usd 320 for the board replacement or do jtag..

if you have hardspl then you cannot kill it from a rom flash, so im assuming you didnt!

Note II GT-N7100 Not Turning On at all

Hello Everyone!
First of all, let me say that i'm desperately in need of help with my phone. Here's what happened to it so everyone knows.
My Phone was bought in UAE and was given to me, i live in the Philippines and it was working fine, i can use it on everyday tasks Until, a few days ago my phone performed updates (auto updates) which made it froze, i tried to press and hold the power button but it doesn't turn off. I removed the battery and restarted my phone then all i get is the Boot screen. I went to recovery mode to perform a wipe/factory reset. it returned with a lot of errors about files missing, etc etc...
At that point i thought that my phone might have been updating the OS when it froze so i DLed a stock firmware because i can still go to download mode.
After a day (crappy internet + limited download speed from sammobile) i finished the firmware download then tried going to download mode on my phone but now, my phone doesnt turn on at all. when i press and hold power+down vol+home nothing happens. i tried going back to recovery mode and still nothing happens. Even if i just press the power key nothing happens at all. I tried charging the phone but its not charging as well, The Battery Icon is not showing on the screen anymore but after minutes f charging i can feel my phone getting warmer.
Anyone experienced this issue before or knows how to fix it? i do not believe that the battery died because it was working just a day before.
Any help and TIPS would greatly help.
again: I cannot go to download/recovery mode nor go to the boot screen.

Hello there,
Try to connect your phone to PC and press power button / vol / home button simultaneously, if PC still recognize your phone, then you still got chance to recover it using Octoplus software?