Develop Bugs

Guys i fear my phone has bitten the dust;(

This morning i just flashed the new froyo rom that the xda guys had made and it said if you was experiencing any led problems to go into adb and delete a file.
I went into adb and mounted the system, but didnt delete a file, when i came out i didnt exit, i just pulled the usb cable,
is it possible that my system is still mounted and is stuck?
when i rebooted i am stuck on a boot loop from the first htc screen and i have no way of getting into recovery...
I dont think this is a usb brick as i didnt flash anything,
im not sure what to do now;(
I cant even flash a new ruu from fastboot;(
Hope you guys can help
JD

Almost the same hapened to med yesterday, but i was able to reflash.
Take out the batery and start into recovery directly, wipe before flash.
Good luck, i hope it works out for ya.

Im not sure if this is a usb brick or not? I think with usb bricks you can still flash a ruu from fastboot, where as i cant;(

infexis said:
Almost the same hapened to med yesterday, but i was able to reflash.
Take out the batery and start into recovery directly, wipe before flash.
Good luck, i hope it works out for ya.
Click to expand...
Click to collapse
I cant get into recovery;( at all;(

getting a device not found when trying to get into recovery, i am completly stuck;( painful times;'((

You can USB-Brick without any flashing.
Can you boot into android or do you get stuck at the loop every time?
Tried booting without the SD?

Rudolfje said:
You can USB-Brick without any flashing.
Can you boot into android or do you get stuck at the loop every time?
Tried booting without the SD?
Click to expand...
Click to collapse
i get stuck at the first htc screen boot loop, cant boot without sd neither;(

i also cant flash a ruu from fastboot;(

also im not sure how to go about unbricking if its unbricked, the instructions are not very clear on modaco, and also i was using the brafrorom4 and im not sure how i would go about making a mtd0.img with that rom.
Completly bamboozled;(

JupiterDroid said:
i also cant flash a ruu from fastboot;(
Click to expand...
Click to collapse
And trying to flash a stock ROM from the built-in recovery (the one accessible with volume-up and power from the HBOOT's red triangle screen)?

Just to be clear, with the device turned off you can't get into HBOOT holding vol. down and turning it on?

@ngel said:
And trying to flash a stock ROM from the built-in recovery (the one accessible with volume-up and power from the HBOOT's red triangle screen)?
Click to expand...
Click to collapse
I have not tried that, how would i go about doing that mate?

JupiterDroid said:
I have not tried that, how would i go about doing that mate?
Click to expand...
Click to collapse
Just boot your Desire with volume-down pressed and once in the HBOOT, select RECOVERY; then, as the red triangle screen appears press volume-up and power until you reach a blue recovery console that has a "Flash from sdcard" menu entry.
Copy a stock ROM to your sdcard and flash it.
I've never tried that, but I readed that the console is able to flash HTC signed stuff, so give it a try...

EddyOS said:
Just to be clear, with the device turned off you can't get into HBOOT holding vol. down and turning it on?
Click to expand...
Click to collapse
i can get into hboot fine

JupiterDroid said:
i can get into hboot fine
Click to expand...
Click to collapse
how can i flash a ruu from the phone? i thought it had to be done from windows?

JupiterDroid said:
how can i flash a ruu from the phone? i thought it had to be done from windows?
Click to expand...
Click to collapse
Two posts above.

@ngel said:
Two posts above.
Click to expand...
Click to collapse
cheers mate, will give it a try now

it wont flash, it has a signature failure

JupiterDroid said:
it wont flash, it has a signature failure
Click to expand...
Click to collapse
Are you trying a stock, untouched HTC ROM?

@ngel said:
Are you trying a stock, untouched HTC ROM?
Click to expand...
Click to collapse
yes i beleve so, i had to rename it to update.zip to be able to flash,
i tried to flash the PB99IMG_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4.06.00.02_2_release_126984_signed.zip rom

Custom ROM won't boot

Hey!
I decided to install a new custom ROM. I went from Revolution HD and tried Viper v2.0, after installing it, my phone has been refusing to boot. (I used Revolution HD Super wipe before installing Viper v2.0) It freezes at "htc quietly brilliant" and stays there and doesnt do anything. Ive jumped into bootloader several times, first i tried the obvious and start Recovery. But everytime I press recovery i can see the "Clockwork recoverymode" for about 0.5 seconds, then some sort of loading and then it reboots and goes back to the startup screen and stays there. Ive alos tried the factory reset, but that didnt work either, so now im wondering what to do and im a little worried.
All help is appreciated.
Thanks alot!

skogaern said:
Hey!
I decided to install a new custom ROM. I went from Revolution HD and tried Viper v2.0, after installing it, my phone has been refusing to boot. (I used Revolution HD Super wipe before installing Viper v2.0) It freezes at "htc quietly brilliant" and stays there and doesnt do anything. Ive jumped into bootloader several times, first i tried the obvious and start Recovery. But everytime I press recovery i can see the "Clockwork recoverymode" for about 0.5 seconds, then some sort of loading and then it reboots and goes back to the startup screen and stays there. Ive alos tried the factory reset, but that didnt work either, so now im wondering what to do and im a little worried.
All help is appreciated.
Thanks alot!
Click to expand...
Click to collapse
did you flash the boot.img for the rom?
also type this command in cmd to get into recovery --> fastboot erase cache

Doo Doo said:
did you flash the boot.img for the rom?
also type this command in cmd to get into recovery --> fastboot erase cache
Click to expand...
Click to collapse
Yes, i flashed the boot.img.
When i type "fastboot erase cache" I only get < waiting for device >
And ye, my phone booted about twice, i got to the lock screen i tried to unlock, then it froze and died.

Have you chosen the fastboot option in the boot loader, plugged in the usb before trying to talk to your phone with fastboot?
Sent from my One X using xda app-developers app

brucezepplin said:
Have you chosen the fastboot option in the boot loader, plugged in the usb before trying to talk to your phone with fastboot?
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
ye i did. Ive tried about everything now, and still nothing. Is there any complete reset option?

skogaern said:
Hey!
But everytime I press recovery i can see the "Clockwork recoverymode" for about 0.5 seconds, then some sort of loading and then it reboots and goes back to the startup screen and stays there.
This problem happened to me a while back, it causes due to cache getting accumulated, fastboot erase cache got my CMW recovery working again..
i dont know why isnt it working in your case..
And about ROM not booting looks like boot.img problem, i hope u made a nandroid
Click to expand...
Click to collapse

OrmaZ said:
skogaern said:
Hey!
But everytime I press recovery i can see the "Clockwork recoverymode" for about 0.5 seconds, then some sort of loading and then it reboots and goes back to the startup screen and stays there.
This problem happened to me a while back, it causes due to cache getting accumulated, fastboot erase cache got my CMW recovery working again..
i dont know why isnt it working in your case..
And about ROM not booting looks like boot.img problem, i hope u made a nandroid
Click to expand...
Click to collapse
I didn't have the lates clockwork version, so when i managed to access the phone through CMD i flashed the newest version and restored my backup. Then i got it working again. So thanks for all your help!
Click to expand...
Click to collapse

How to Root Nexus 10 on Win/Mac/Linux! [Step-by-Step VIDEO Tutorials]

Here's a video tutorial on how to root your Nexus 10 for noobs!
Windows video tutorial:
Mac video tutorial:
Linux video tutorial:
All the files you need in one zip (adb+SuperSU+fastboot+Windows drivers):
http://downloadandroidrom.com/file/Nexus10/Nexus10RootNew.zip
Step-by-Step tutorial with photos here:
http://nexus10root.com/nexus-10-root/how-to-root-nexus-10-easiest-method/
Also, if you get stuck on bootloop after unlocking bootloader (This happened to me couple times), do a factory reset in stock recovery to fix:
Thanks to shimp208 for the sideload method and working CWM, ChainFire for awesome SuperSU and to all the developers who are worked on CWM recovery!

So the CWM that was just updated by Koushik on CWM does not work properly or does it work? Was asking based on this
While CWM Recovery is still being fixed
Click to expand...
Click to collapse
Edit: There's no driver issue if it were on a Mac right? Especially adb sideloading the CWM SuperSu zip?

How do I flash the stock recovery? CWM isn't working and I tried to update the driver like in the video but couldn't find the "manta" that I needed to update. I'm just stuck in bootloop animation now. I'm downloading the stock image right now to try and flash it back to stock..

johno86 said:
How do I flash the stock recovery? CWM isn't working and I tried to update the driver like in the video but couldn't find the "manta" that I needed to update. I'm just stuck in bootloop animation now. I'm downloading the stock image right now to try and flash it back to stock..
Click to expand...
Click to collapse
If you go into fastboot mode then choose recovery to get to the screen with the red triangle, keep pressing the power button and volume buttons randomly until the stock recovery pops up. From there do a factory reset and it'll work, I just did it to mine!

I flashed the CWM recovery img so when I do what you say it takes me to the bootloader screen and says Downloading. No red triangle. It boots into CWM and then after 20 seconds restarts itself and hits the bootanimation loop. Any clue what to do next? Trying to flash the stock image but having issues using cmds in windows cmd
*edit
I cleared cache through cmd and i got to the red triangle...thank ****ing the lord. DTWAZERE, I will remember tonight. Thank you for your help.

johno86 said:
I flashed the CWM recovery img so when I do what you say it takes me to the bootloader screen and says Downloading. Any clue what to do next? Trying to flash the stock image but having issues getting it into fastboot now...
Click to expand...
Click to collapse
Thing is it will delete the CWM recovery when you leave it so you'll have to reflash it, which is why this is so unstable!
I had the exact same thing as you and this is what I did:
Press the power button to turn it off while it says downloading
Hold both volume buttons down and power on to get into fastboot
Choose recovery
Press power and volume buttons randomly when the red triangle appears until you get stock recovery
Choose Factory Reset
Reboot
You should be able to get back into the rom that way,
to root it you need to boot into fastboot again, reflash the recovery, and sideload the superuser apk

dtwazere said:
Thing is it will delete the CWM recovery when you leave it so you'll have to reflash it, which is why this is so unstable!
I had the exact same thing as you and this is what I did:
Press the power button to turn it off while it says downloading
Hold both volume buttons down and power on to get into fastboot
Choose recovery
Press power and volume buttons randomly when the red triangle appears until you get stock recovery
Choose Factory Reset
Reboot
You should be able to get back into the rom that way,
to root it you need to boot into fastboot again, reflash the recovery, and sideload the superuser apk
Click to expand...
Click to collapse
Yeah this is exactly what I did and it worked. I'll wait on flashing anything until there's a stable recovery. I was fairly confident in what I was doing until that happened. Not being able to input commands from cmd prompt made me sick so I'll wait for a dev to release something that works without having to quickly install the drivers again within a 15-20 second timeframe. Too much stress.

cant boot
I got a huge problem.
I follow the step and going on. Ive seen the done in CWMR. But the tablet cant boot.
It stops in the second animation( X mark) cant boot in os.
Anyone can help me?

lc684760 said:
I got a huge problem.
I follow the step and going on. Ive seen the done in CWMR. But the tablet cant boot.
It stops in the second animation( X mark) cant boot in os.
Anyone can help me?
Click to expand...
Click to collapse
Heh im having the same issue.

lc684760 said:
I got a huge problem.
I follow the step and going on. Ive seen the done in CWMR. But the tablet cant boot.
It stops in the second animation( X mark) cant boot in os.
Anyone can help me?
Click to expand...
Click to collapse
I'm having the same issue. Stuck on the 2nd splash screen with the Nexus Logo.
I received successful messages after every entry.

deevooneh said:
I'm having the same issue. Stuck on the 2nd splash screen with the Nexus Logo.
I received successful messages after every entry.
Click to expand...
Click to collapse
sucks. But we can boot in fastboot and downloading . I think we may have some tricks to fix.

i did everything, and it all went successfully after a few tried. Now i am stuck with the JB X load screen.
How do i get the stock google rom and how do i flash it?

lc684760 said:
sucks. But we can boot in fastboot and downloading . I think we may have some tricks to fix.
Click to expand...
Click to collapse
Ok. Let me know if you figure something out. Hopefully we didnt brick it.

deevooneh said:
Ok. Let me know if you figure something out. Hopefully we didnt brick it.
Click to expand...
Click to collapse
I just called service phone. But goole play agent told me that they didnt know how to deal with that. Its the new device. They dont know much. Damn it!

lc684760 said:
I just called service phone. But goole play agent told me that they didnt know how to deal with that. Its the new device. They dont know much. Damn it!
Click to expand...
Click to collapse
How do we get back to stock? Might need to reattempt this.

If you are stuck on the boot animation (X) screen... power off your device and enter fastboot mode and then type fastboot -w... I has this problem and this fixed it!
NOTE: fastboot -w will wipe your internal storage completely

dtwazere said:
If you go into fastboot mode then choose recovery to get to the screen with the red triangle, keep pressing the power button and volume buttons randomly until the stock recovery pops up. From there do a factory reset and it'll work, I just did it to mine!
Click to expand...
Click to collapse
deevooneh said:
How do we get back to stock? Might need to reattempt this.
Click to expand...
Click to collapse
Stock is here
https://developers.google.com/android/nexus/images#mantarayjop40c
Still need a way to get CWM stable, so we have time to copy to sd

craigacgomez said:
If you are stuck on the boot animation (X) screen... power off you devices and enter fastboot mode and then type fastboot -w... I has this problem and this fixed it!
NOTE: fastboot -w will wipe your internal storage completely
Click to expand...
Click to collapse
THIS WORKED!!
Youre a genius. thanks!

When I try to install the manta drivers manually and tell it to search the same area that it searched and found the android bootloader drivers for fastboot mode it says that the drivers couldn't be found and installed. Am I missing something? Also if i try to do fastboot flash recovery it gives me an error message stating that it cannot determine the image filename for the recovery image.

Well i guess i did it the long way around.
Went to https://developers.google.com/android/nexus/images#mantarayjop40c
and downloaded the Nexus 10 file. extracted, and the actual files in the Nexus10Root folder.
Opened the flash-all.sh and entered each command manually because it was erroring out running the script.
After the 3rd command it booted right into android!

[Q][HELP][SOLVED] Fastboot can't send boot.img to my phone

I think I really screwed up my phone, I was trying to get my Google play store working on my phone by adjusting the Dpi (read it somewhere on the internet), so I rebooted and it wouldn't load my rom/system anymore. But the problem now is, is that I can't acces my sd card with HBOOT or similar things, fastboot does see my device but if I try sending files to it the next error appears:
C:\Users\Elke\Desktop\r1-primo-superboot>fastboot flash system shpongle.zip
sending 'system' (131180 KB)... FAILED (command write failed (Unknown error))
Als this error keeps occuring:
C:\Users\Elke\Desktop\r1-primo-superboot>fastboot flash boot boot.img
< waiting for device >
sending 'boot' (2988 KB)... FAILED (status malformed (1 bytes))
Does anybody know what I should do to get my phone working again? Because I really need my phone (it contains all my appointments and homework and stuff)
PS: If you need more information on my phone just ask for it and I'll try my best to find it!
PPS: Thanks in advance!

I think I fixed it
After numerous attempts my phone is responding to some fastboot commands, so I think I got it working again
Edit:
Now my phone is stuck at the HTC startup screen

SirBigAfro said:
After numerous attempts my phone is responding to some fastboot commands, so I think I got it working again
Edit:
Now my phone is stuck at the HTC startup screen
Click to expand...
Click to collapse
Are you sure you flashed the right kernel for the ROM as stated in it's OP?

SirBigAfro said:
After numerous attempts my phone is responding to some fastboot commands, so I think I got it working again
Edit:
Now my phone is stuck at the HTC startup screen
Click to expand...
Click to collapse
heyy man, if you have a custom recovery already installed, use that to wipe your phone and install the new rom
then pull the boot.img out of the rom .zip you are trying to use, then you need to "fastboot flash boot d:/boot.img" (of course, to your boot.img location)
hope this helps

Yes
MameTozhio said:
Are you sure you flashed the right kernel for the ROM as stated in it's OP?
Click to expand...
Click to collapse
Yes I'm sure I flashed the boot-HELLBOY-20130514.img before and then it worked perfectly, but now it got stuck on the htc screen...

brasssmunkye said:
heyy man, if you have a custom recovery already installed, use that to wipe your phone and install the new rom
then pull the boot.img out of the rom .zip you are trying to use, then you need to "fastboot flash boot d:/boot.img" (of course, to your boot.img location)
hope this helps
Click to expand...
Click to collapse
The custom ROM is no longer on my phone due to lack of space, and here is the problem I can't acces my SD card (Won't show up in my computer) in bootloader (to transfer the needed files) Is there someway to transfer my files with fastboot? or ADB or something like that?

Damn
I just reflashed my system, boot, and recovery but still no luck. my phone still won't go past the HTC screen
Im using this ROM + Kernel http://forum.xda-developers.com/showthread.php?t=2230656
I don't care about my user files anymore, I just want to get my phone to work again

SirBigAfro said:
I just reflashed my system, boot, and recovery but still no luck. my phone still won't go past the HTC screen
Im using this ROM + Kernel http://forum.xda-developers.com/showthread.php?t=2230656
I don't care about my user files anymore, I just want to get my phone to work again
Click to expand...
Click to collapse
flash the kernel
http://www.mediafire.com/download/vj8vv8hjyhzg3xv/boot-HELLBOY-42-201305202359.img

Seraz007 said:
flash the kernel
http://www.mediafire.com/download/vj8vv8hjyhzg3xv/boot-HELLBOY-42-201305202359.img
Click to expand...
Click to collapse
I have already done that, still not working

SirBigAfro said:
I have already done that, still not working
Click to expand...
Click to collapse
i think u flashed kernel which is in the ROM Thread which doesnt work
just try this one out :fingers-crossed:
and remember to do a full wipe

Seraz007 said:
i think u flashed kernel which is in the ROM Thread which doesnt work
just try this one out :fingers-crossed:
and remember to do a full wipe
Click to expand...
Click to collapse
thank you I will try this in about half an hour! (btw: Do I need a correct kernel in order to get to my recovery? )

SirBigAfro said:
thank you I will try this in about half an hour! (btw: Do I need a correct kernel in order to get to my recovery? )
Click to expand...
Click to collapse
umm no u can get to recovery by holding down power button until your screen turns off and then holding your volume DOWN button
if u have full wiped b4 there's no need to do it again

Seraz007 said:
umm no u can get to recovery by holding down power button until your screen turns off and then holding your volume DOWN button
if u have full wiped b4 there's no need to do it again
Click to expand...
Click to collapse
I just flashed the boot image you gave me, but it's still stuck at the HTC screen.

Dammit again
I have to go to school in about 2 minutes so here is the status of my phone
-just flashed new kernel, but still stuck at HTC screen
-In bootloader when I select my customrecovery (TWRP) it shows HTC with a loadboar in the right-upper corner, then that loadingbar disappears and it shows just HTC (with red lettering underneath : This build... etc) and gets stuck again.
Thanks for the help so far but my phone is still broken dammit :c

Since you've got fastboot working again, re flash your custom recovery first.
Fastboot flash recovery recovery.img
Then boot into recovery.
Now you can go into >advance>mount>mount USB storage
( using TWPR )
Copy the custom Rom to your pc
Unmount USB storage move to >wipe cashe, dalvick cache, factory reset, system
Wipe everything.
Move to > install and flash Rom
Once install is finished click the wipe cashe/dalvick.
Go back to the home screen in TWRP click >reboot> bootloader
Now flash your kernel. fastboot flash boot boot.img
Once finished fastboot reboot
I think you might have had a bad recovery flash.

russellvone said:
Since you've got fastboot working again, re flash your custom recovery first.
Fastboot flash recovery recovery.img
Then boot into recovery.
Now you can go into >advance>mount>mount USB storage
( using TWPR )
Copy the custom Rom to your pc
Unmount USB storage move to >wipe cashe, dalvick cache, factory reset, system
Wipe everything.
Move to > install and flash Rom
Once install is finished click the wipe cashe/dalvick.
Go back to the home screen in TWRP click >reboot> bootloader
Now flash your kernel. fastboot flash boot boot.img
Once finished fastboot reboot
I think you might have had a bad recovery flash.
Click to expand...
Click to collapse
I tried flashing the newest recovery (TWRP) but no luck, any advice and which recovery rom/img I should use?

Are you primoc or primou?
---------- Post added at 05:40 PM ---------- Previous post was at 05:17 PM ----------
I'm primoc I've got everything you'll need if you are too
If you're primou, frankly I'm sorry but I wouldn't be able to help you with what recovery/boot.img or Rom to use because I have not and will not be able to test them before I suggest them.
Just not good help practice.

SirBigAfro said:
I tried flashing the newest recovery (TWRP) but no luck, any advice and which recovery rom/img I should use?
Click to expand...
Click to collapse
RUU back to stock, then re-"unlock", and re-try, soemthing must not be right or something.

russellvone said:
Are you primoc or primou?
---------- Post added at 05:40 PM ---------- Previous post was at 05:17 PM ----------
I'm primoc I've got everything you'll need if you are too
If you're primou, frankly I'm sorry but I wouldn't be able to help you with what recovery/boot.img or Rom to use because I have not and will not be able to test them before I suggest them.
Just not good help practice.
Click to expand...
Click to collapse
I have primoU...

brasssmunkye said:
RUU back to stock, then re-"unlock", and re-try, soemthing must not be right or something.
Click to expand...
Click to collapse
What is RUU and how do I use it? and also were can I find it?

[Q] HOX wont start up; can go to bootloader cant change anything.

hia,
My HOX won't start up anymore.
Ive been trying to install ARHD 31.0 wich didnt work out very well.
When im in bootloader and select recovery or factory reset my phone starts up TWRP v2.4.1.0.
In TWRP the touchscreen doenst work so basicly i cant do a thing.
Anyone an idea to get my phone back working?
Thanks in advance,
Meganza

meganza said:
hia,
My HOX won't start up anymore.
Ive been trying to install ARHD 31.0 wich didnt work out very well.
When im in bootloader and select recovery or factory reset my phone starts up TWRP v2.4.1.0.
In TWRP the touchscreen doenst work so basicly i cant do a thing.
Anyone an idea to get my phone back working?
Thanks in advance,
Meganza
Click to expand...
Click to collapse
You need to flash a new recovery I think,
I think touch is supported with TWRP 2.5 or 2.6, or philz touch recovery.
I believe that if you flash the new TWRP over the old one, your backups are safe and touch is restored.

Stefan0vic said:
You need to flash a new recovery I think,
I think touch is supported with TWRP 2.5 or 2.6, or philz touch recovery.
I believe that if you flash the new TWRP over the old one, your backups are safe and touch is restored.
Click to expand...
Click to collapse
Replaced it with TWRP 2.6, TWRP doesnt even start up now anymore.

meganza said:
Replaced it with TWRP 2.6, TWRP doesnt even start up now anymore.
Click to expand...
Click to collapse
Have you done:
fastboot flash recovery recovery.img
fastboot erase cache?
also, are you sure that after you installed the rom, you flashed the corresponding boot.img? Else it will not boot up.
otherwise try to flash this: http://forum.xda-developers.com/showthread.php?t=2240646

Stefan0vic said:
Have you done:
fastboot flash recovery recovery.img
fastboot erase cache?
also, are you sure that after you installed the rom, you flashed the corresponding boot.img? Else it will not boot up.
otherwise try to flash this: http://forum.xda-developers.com/showthread.php?t=2240646
Click to expand...
Click to collapse
phone is in an constant reboot now... cant really do anything...

meganza said:
phone is in an constant reboot now... cant really do anything...
Click to expand...
Click to collapse
can you still get into bootloader?

meganza said:
phone is in an constant reboot now... cant really do anything...
Click to expand...
Click to collapse
1)hold power button down till bottom light starts to flash and phone turns
2)hold vol- and power button together do not let go power button till you get to hboot screen ie bootloader

Stefan0vic said:
can you still get into bootloader?
Click to expand...
Click to collapse
Got into my bootloader. In there it says "battery level to low to flash".
When i say "power off" it will automaticly power on again.

meganza said:
Got into my bootloader. In there it says "battery level to low to flash".
When i say "power off" it will automaticly power on again.
Click to expand...
Click to collapse
Have a look here
http://forum.xda-developers.com/showthread.php?t=1658084&page=1

Stefan0vic said:
Have a look here
http://forum.xda-developers.com/showthread.php?t=1658084&page=1
Click to expand...
Click to collapse
thanks i can now install a new recovery
edit: installed the philztouch as recommened above. allthough it is installed it wont boot to it.
I can see the logo's on the bottom for a sec or 2 then my phone just restarts.
Edit: found some .exe ruu's online wich work but im getting a 140 error wich means version error.
I have version 3.20.xxx on my phone and can only find 3.14.xx online anyone an idea?

meganza said:
thanks i can now install a new recovery
edit: installed the philztouch as recommened above. allthough it is installed it wont boot to it.
I can see the logo's on the bottom for a sec or 2 then my phone just restarts.
Edit: found some .exe ruu's online wich work but im getting a 140 error wich means version error.
I have version 3.20.xxx on my phone and can only find 3.14.xx online anyone an idea?
Click to expand...
Click to collapse
There are no RUU's ..
Best thing to do is to get your recovery working.
Are you sure that after you flashed the recovery you did:
fastboot erase cache
and are you sure your phone is international?

Stefan0vic said:
There are no RUU's ..
Best thing to do is to get your recovery working.
Are you sure that after you flashed the recovery you did:
fastboot erase cache
and are you sure your phone is international?
Click to expand...
Click to collapse
My phone is international. not branded.
But came a bit further now.
Installed ar hd 31, but it wont boot up.
It is flashed properly ( it says it does) but when i reboot i get a with screen with the green HTC letters.

meganza said:
My phone is international. not branded.
But came a bit further now.
Installed ar hd 31, but it wont boot up.
It is flashed properly ( it says it does) but when i reboot i get a with screen with the green HTC letters.
Click to expand...
Click to collapse
and did you flash boot.img?

Stefan0vic said:
and did you flash boot.img?
Click to expand...
Click to collapse
how do i do that?

meganza said:
how do i do that?
Click to expand...
Click to collapse
in your rom zip, extract it there's a boot.img
copy it into your fastboot folder and go to cmd
type following:
fastboot flash boot boot.img
fastboot erase cache
reboot the phone

it's working again.! THANKS!

meganza said:
error cannot load 'boot.img' unkown error
Click to expand...
Click to collapse
boot.img refers to the actual boot.img you have so you need the correct path to it.
or simple do:
fastboot flash boot (then drag on the boot.img file) 'return'

gffmac said:
boot.img refers to the actual boot.img you have so you need the correct path to it.
or simple do:
fastboot flash boot (then drag on the boot.img file) 'return'
Click to expand...
Click to collapse
flashed it and erased the cache. still nog booting.
Got a with screen saying HTC ONE beats audio

meganza said:
flashed it and erased the cache. still nog booting.
Got a with screen saying HTC ONE beats audio
Click to expand...
Click to collapse
Leave it to boot for a couple of minutes. If you flashed the boot.img right it should boot up.

meganza said:
flashed it and erased the cache. still nog booting.
Got a with screen saying HTC ONE beats audio
Click to expand...
Click to collapse
The first boot, does take some time....
Or go into recovery do a factory reset and reinstall rom, you can mount usb from recovery to if you need to copy the rom.zip onto the phone.