I installed a new rom that I ended up not liking as much as I thought I would so I restored to the nandroid backup I had previously made. Now when I turn the phone on it gets stuck at the white "htc Incredible" screen. I have pulled the battery and can get into recovery but when I try to turn it on normally it does not work. Anybody know how I can fix this?
Go into recovery, which you say you can do, and try your nandroid restore again. If that fails, it may be a corrupt nandroid. Worst case, wipe clean and flash the previous ROM that you know works and rebuild your apps and data.
vbrana24 said:
I installed a new rom that I ended up not liking as much as I thought I would so I restored to the nandroid backup I had previously made. Now when I turn the phone on it gets stuck at the white "htc Incredible" screen. I have pulled the battery and can get into recovery but when I try to turn it on normally it does not work. Anybody know how I can fix this?
Click to expand...
Click to collapse
Thank you very much. I could not restore to the backup I had made and I never thought to just go back to the rom I had on the SD card. Thank you.
Not trying to threadjack here but I have mostly the same problem so I thought I would just add it here. I was flashed Ruby 2.02 ROM and was just setting things up when my phone rebooted it would not get past the htc incredible splash screen so I read to pull the battery and try to reboot into recovery. When I tried to reboot into recovery my phone just vibrated 3 times then went dead. Did my phone just get bricked or what? ANY help would be awesome!
packerjd04 said:
Not trying to threadjack here but I have mostly the same problem so I thought I would just add it here. I was flashed Ruby 2.02 ROM and was just setting things up when my phone rebooted it would not get past the htc incredible splash screen so I read to pull the battery and try to reboot into recovery. When I tried to reboot into recovery my phone just vibrated 3 times then went dead. Did my phone just get bricked or what? ANY help would be awesome!
Click to expand...
Click to collapse
Can you still get to recovery now? If so, you are probably ok.
I am able to get into recovery but if I try to reboot from there it is still stuck at the splash screen. I think my sd card is not working right now, so I am not able to flash anything. Is my only solution a factory reset?
packerjd04 said:
I am able to get into recovery but if I try to reboot from there it is still stuck at the splash screen. I think my sd card is not working right now, so I am not able to flash anything. Is my only solution a factory reset?
Click to expand...
Click to collapse
You need to boot recovery, wipe and flash a known working rom and start completely over. You really need to get a working card.
Well I flashed one and the problem didn't change so I am now flashing an older one of a different ROM that I hope will work.
packerjd04 said:
Well I flashed one and the problem didn't change so I am now flashing an older one of a different ROM that I hope will work.
Click to expand...
Click to collapse
complete wipe???
Good news!! The second backup I flashed worked! I think I should be okay for now, thanks for the help userjf.
Good evening everyone,
I've been scanning the forums and everyone's problems seems a little different. First of all, i was running CM10 and missed some of the sense features, so i jumped to ViperX.
1. Everything seemed fine on first run, got the snakey tail, but then i noticed it was hanging just after this with the "Htc quietly brilliant" screen and snakey long gone!
2. So i reboot my phone, this time, it just hung on the first start screen and never so much as flinched.
3. I booted into recovery (CWM) and couldn't even get there, it was like a blink of the recovery screen and then it vanished and rebooted, I wiped everything clean by doing a factory reset and tried to reboot again. Same result.
4, Flashed TWRP and managed to get into recovery mode and install ViperX again but on reboot I'm stick at that same ol' "quietly brilliant" screen, this time with no snakey.
I can get into hboot to use fastboot and into recovery in TWRP but cannot get into the OS. I'm not clear as to whether this is a problem with hboot or the way the rom is installed but any suggestions or such about how i've gone about things and how to go about getting around this problem would be great! Gracias! :good:
Did you flash the correct boot.img?
BenPope said:
Did you flash the correct boot.img?
Click to expand...
Click to collapse
Strangely, and by the luck of trial and error, I tried 2 boot images. The first was for CM10 (again, this was trial and error) and now i've just rebooted from the ViperX one and managed to get back in. Back up in progress! Phewww!!!!
You get my thanks for replying anyhow!
Ok, so I decided to flash my KF with CM10. To do this I did the standard KFU superuser, installed TWRP, and fff. After I flashed with TWRP the Google apps and CM everything worked okay, but I noticed that my Google apps are nonexistent. So, I thought I would reflash with TWRP, which is where the problem lies. Whenever I reboot my device I get the KF logo, except white and blue, telling me to press power button to change boot, which I have tried but to no avail, and it goes straight to the CM10 boot. I thought okay maybe I can get around this by downloading Goo Manager onto my device to flash the GApps. This didn't work. So finally I just assumed my TWRP screwed up so I downloaded the recovery package from Goo Manager. This also didn't work. Also, KFU doesn't recognize it.
Right now I'm assuming the problem is fff because I've never seen this blue boot screen. If someone could help me just get TWRP back to working or even just stock KF I would be much obliged.
If I understand you correctly, I then think you have no clue what TWRP or at least FFF is about. I hope I am wrong.
Alright, after installing FFF, you will DO SEE the Kindle Fire logo with blue (the Fire is in Blue) and it will ask you to press the power button to get into either normal boot, recovery boot and one more which I forgot. That's what it should be. I don't know what your problem is.
Anyway, from that Kindle Fire blue screen, press the power button and select boot to recovery to get in TWRP.
I might speak entire wrong here, though.
votinh said:
If I understand you correctly, I then think you have no clue what TWRP or at least FFF is about. I hope I am wrong.
Alright, after installing FFF, you will DO SEE the Kindle Fire logo with blue (the Fire is in Blue) and it will ask you to press the power button to get into either normal boot, recovery boot and one more which I forgot. That's what it should be. I don't know what your problem is.
Anyway, from that Kindle Fire blue screen, press the power button and select boot to recovery to get in TWRP.
I might speak entire wrong here, though.
Click to expand...
Click to collapse
From what Brandon is saying, I think you hit it on the head.
One note: it takes several seconds to access the recovery from the fff 1.4a blue kindle fire logo. Once that screen pops up, hold the power button for about three seconds till recovery is selected at bottom.
It doesn't appear that you actually have a problem, either, but just a misunderstanding of what your kindle should look like.
sent from The Muffinator (it's a kindle fire running cm10.1)
using Tapatalk 4 beta, and loving it!
votinh said:
If I understand you correctly, I then think you have no clue what TWRP or at least FFF is about. I hope I am wrong.
Alright, after installing FFF, you will DO SEE the Kindle Fire logo with blue (the Fire is in Blue) and it will ask you to press the power button to get into either normal boot, recovery boot and one more which I forgot. That's what it should be. I don't know what your problem is.
Anyway, from that Kindle Fire blue screen, press the power button and select boot to recovery to get in TWRP.
I might speak entire wrong here, though.
Click to expand...
Click to collapse
When I attempt to boot to recovery I get no TWRP. The screen flashes then the normal Kindle Fire boot screen shows, then another flash and back to blue sccreen
Again, I assume you know how to do it, how to boot into recovery.
If you do it correctly and still can't get in then reinstall FFF using KFU.
If you don't know how to, then search Youtube, there's tons of videos showing how.
votinh said:
Again, I assume you know how to do it, how to boot into recovery.
If you do it correctly and still can't get in then reinstall FFF using KFU.
If you don't know how to, then search Youtube, there's tons of videos showing how.
Click to expand...
Click to collapse
Except as I said earlier KFU doesn't recognize my device. I mean I'll check my drivers, but looks doubful.
brandonstrat said:
Except as I said earlier KFU doesn't recognize my device. I mean I'll check my drivers, but looks doubful.
Click to expand...
Click to collapse
Did you bother to try what I suggested?
sent from The Muffinator (it's a kindle fire running cm10.1)
using Tapatalk 4 beta, and loving it!
jma9454 said:
Did you bother to try what I suggested?
sent from The Muffinator (it's a kindle fire running cm10.1)
using Tapatalk 4 beta, and loving it!
Click to expand...
Click to collapse
Yeah and it worked, but after restoring back to stock kf it kept sayin that process had stopped working and never allowing me to actually set the damn thing up. So reflashed CM10 and it keeps looping the boot screen, showing a quick image of the home screen then restarting the process. Long holding the power restarts the device, allowing me to get to fff but I still can't seem to get TWRP to show up unless I tell it to fast boot on the computer and since it never actually gets to TWRP or the OS I see no way to mount it.
brandonstrat said:
Yeah and it worked, but after restoring back to stock kf it kept sayin that process had stopped working and never allowing me to actually set the damn thing up. So reflashed CM10 and it keeps looping the boot screen, showing a quick image of the home screen then restarting the process. Long holding the power restarts the device, allowing me to get to fff but I still can't seem to get TWRP to show up unless I tell it to fast boot on the computer and since it never actually gets to TWRP or the OS I see no way to mount it.
Click to expand...
Click to collapse
How did you restore to stock? That isn't what I told you to do...
When you plug it into the computer, what happens?
And also, when you reboot it, and you hold the power button at the blue screen with the menu at bottom, what happens? Does it cycle through three choices? If it does, wait till it selects the second one and let go.
Sent from my Amazon Kindle Fire using Tapatalk HD
jma9454 said:
How did you restore to stock? That isn't what I told you to do...
When you plug it into the computer, what happens?
And also, when you reboot it, and you hold the power button at the blue screen with the menu at bottom, what happens? Does it cycle through three choices? If it does, wait till it selects the second one and let go.
Sent from my Amazon Kindle Fire using Tapatalk HD
Click to expand...
Click to collapse
Well I did do what you told me to do I reinstalled TWRP and fff and tried to install gapps. Well long story short nothing happened. So I did do what you told me to do. Anyways, the only thing that happens when I hit recovery is it strangely goes to the normal orange kf boot for a couple second, back to blue kf boot but with no boot option and back to annoying CM10 boot loop I previously described.
brandonstrat said:
Well I did do what you told me to do I reinstalled TWRP and fff and tried to install gapps. Well long story short nothing happened. So I did do what you told me to do. Anyways, the only thing that happens when I hit recovery is it strangely goes to the normal orange kf boot for a couple second, back to blue kf boot but with no boot option and back to annoying CM10 boot loop I previously described.
Click to expand...
Click to collapse
Follow what you are saying is really a headache. You keep saying you did this and did that and that and this and I'm lost. Slow down.
Go one by one, answer what jma asked.
Forget what you have done to your KF, tell us what it is like now.
1. Can you get into the recovery? I ask again 'cuz you previously claimed you knew how to, then you didn't then you did.
2. During power up, do you see Kindle Fire with blue logo?
3. Right after that do you hold the power button?
4. Do you see it cycle through the menu of 3?
.
.
.
votinh said:
Follow what you are saying is really a headache. You keep saying you did this and did that and that and this and I'm lost. Slow down.
Go one by one, answer what jma asked.
Forget what you have done to your KF, tell us what it is like now.
1. Can you get into the recovery? I ask again 'cuz you previously claimed you knew how to, then you didn't then you did.
2. During power up, do you see Kindle Fire with blue logo?
3. Right after that do you hold the power button?
4. Do you see it cycle through the menu of 3?
.
.
.
Click to expand...
Click to collapse
Alright, sorry bout that I guess
1. If by recovery you mean TWRP, then no I don't believe so
2. Yes
3. Yes
4. Yes, but all options take me to the CM10 boot except recovery which takes me to regular stock orange kf boot for a few seconds then back to blue without the options but just boots
Hope that's a bit more clear, I guess I'm kindave panicking with my kindle being on the fritz and all. But you my good sir have been very patient and for that I thank you.
brandonstrat said:
Well I did do what you told me to do I reinstalled TWRP and fff and tried to install gapps. Well long story short nothing happened. So I did do what you told me to do. Anyways, the only thing that happens when I hit recovery is it strangely goes to the normal orange kf boot for a couple second, back to blue kf boot but with no boot option and back to annoying CM10 boot loop I previously described.
Click to expand...
Click to collapse
Okay, two things:
1) The reason you keep getting stuck at the CyanogenMod logo is because you're not wiping data (factory reset) before installing the ROM.
2) I'm very concerned because it seems that you may not know what generation of Kindle Fire you're using. You are posting in the 1st generation KF forums, but by your description you seem to have a 2nd generation KF. You need to clarify which device you have before someone gives you directions that would permanently brick your device.
soupmagnet said:
Okay, two things:
1) The reason you keep getting stuck at the CyanogenMod logo is because you're not wiping data (factory reset) before installing the ROM.
2) I'm very concerned because it seems that you may not know what generation of Kindle Fire you're using. You are posting in the 1st generation KF forums, but by your description you seem to have a 2nd generation KF. You need to clarify which device you have before someone gives you directions that would permanently brick your device.
Click to expand...
Click to collapse
1. That would make sense because I was I'm a hurry
2. It's first gen, I would have clarified had this not been a forum specifically geared towards first gen, but I appreciate your concern.
brandonstrat said:
1. That would make sense because I was I'm a hurry
2. It's first gen, I would have clarified had this not been a forum specifically geared towards first gen, but I appreciate your concern.
Click to expand...
Click to collapse
Well, you never know around here...
Since that's the case, it seems like you have a bootloader installed on the recovery partition. Your device's original bootloader is working as it should (orange KF logo), but when you change the bootmode to recovery, it boots into what should be the custom recovery, but instead is the FireFireFire bootloader. BUT...that's a best guess based on what I can piece together from the information you've provided. (I've avoided responding to this post for exactly this reason).
The problem is, your information is all over the place and much of it contradicts itself. In one post, you say you have the blue KF logo, but then in the same post, you say don't. Then you say you used TWRP to install a custom ROM, but then you can't access TWRP? But then you say you restored the device to stock using TWRP, and yet you can't access TWRP after that.
Perhaps you could explain in a clear and concise manner what your problem is, being as detailed as humanly possible, because as it stands now, you're not making any sense.
soupmagnet said:
Well, you never know around here...
Since that's the case, it seems like you have a bootloader installed on the recovery partition. Your device's original bootloader is working as it should (orange KF logo), but when you change the bootmode to recovery, it boots into what should be the custom recovery, but instead is the FireFireFire bootloader. BUT...that's a best guess based on what I can piece together from the information you've provided. (I've avoided responding to this post for exactly this reason).
The problem is, your information is all over the place and much of it contradicts itself. In one post, you say you have the blue KF logo, but then in the same post, you say don't. Then you say you used TWRP to install a custom ROM, but then you can't access TWRP? But then you say you restored the device to stock using TWRP, and yet you can't access TWRP after that.
Perhaps you could explain in a clear and concise manner what your problem is, being as detailed as humanly possible, because as it stands now, you're not making any sense.
Click to expand...
Click to collapse
Okay I'll try again, the only times I have actually been able to use TWRP is when installing it in kfu. I don't believe that it actually installed anything but it just sends it to fastboot, now I could be incorrect but what I believe is happening is the kfu is telling the kf to go to fastboot to install but TWRP is already installed because nothing ever downloads.
Is that what normally happens when you hit recovery on the fff screen? Does the TWRP require fastboot or is mine just really messed up?
brandonstrat said:
Okay I'll try again, the only times I have actually been able to use TWRP is when installing it in kfu. I don't believe that it actually installed anything but it just sends it to fastboot, now I could be incorrect but what I believe is happening is the kfu is telling the kf to go to fastboot to install but TWRP is already installed because nothing ever downloads.
Is that what normally happens when you hit recovery on the fff screen? Does the TWRP require fastboot or is mine just really messed up?
Click to expand...
Click to collapse
Something about this just doesn't add up.
Try this...
1) Download the recovery flashable .zip of FireFireFire1.4a
2) Reinstall TWRP using KFU and boot into it.
3) Use TWRP to flash the recovery flashable fff-u-boot_v1.4a.zip and reboot.
If the problem persists, take a video of it, and post it here so we can get a better idea of what's actually going on.
soupmagnet said:
Something about this just doesn't add up.
Try this...
1) Download the recovery flashable .zip of FireFireFire1.4a
2) Reinstall TWRP using KFU and boot into it.
3) Use TWRP to flash the recovery flashable fff-u-boot_v1.4a.zip and reboot.
If the problem persists, take a video of it, and post it here so we can get a better idea of what's actually going on.
Click to expand...
Click to collapse
Ok but when could I actually mount the device
brandonstrat said:
Ok but when could I actually mount the device
Click to expand...
Click to collapse
Better yet, go ahead and post a video of the problem. I need to confirm something before you flash FFF.
soupmagnet said:
Better yet, go ahead and post a video of the problem. I need to confirm something before you flash FFF.
Click to expand...
Click to collapse
note: the screen that flashes is from my previous rom sooo, yeah. Factory wiping is a good thing.